Problems with WWV_FLOW_ITEM. MD5 - does not seem to be decisive

Similar Questions

• I have a problem with my laptop does not connect to the internet. It connects to our wireless very well, but it doesn't have an internet connection.

  I have a problem with my laptop does not connect to the internet. It connects to our wireless very well, but it doesn't have an internet connection. It connects to other networks wifi very well with Internet access, is that the wireless in my house what it connects to. When I diagnose the problem, it says "Cannot communicate with DNS server (208.67.222.222)", and then under that it says: "languished network diagnostics remote hosts, but had not received a response." It connects to the Internet through an ethernet cable, but it is rather annoying pulling the cable autour. I currently have Windows Vista Home Premium. Thank you!

  original title: Internet connectivity problem

  Hello

  Now, you may need to contact the support of Panda Internet Security centre to change the settings so that wireless is enabled through it.

  Support link: http://www.pandasecurity.com/homeusers/support/

• Vista Business 64-Bit with AutoCAD 2009 does not seem to use all 8 GB of RAM available.

  A workstation newly built (S5000XVN Intel / Xeon / 8 GB RAM / 2 GB RAM video) with Windows Vista Business 64-bit is used with AutoCAD 2009 (64-bit).  The workstation hangs under stress, apparently because not enough RAM is available.  ("Stress" is "Turning entirely made of a certain complexity 3D drawings")

  The Task Manager / Performance tab indicates never to use RAM above about 3.25 GB, even if ten or more concurrent applications are loaded, including IE 8 (6 graphically heavy windows) and AutoCAD with 6 or more complex drawings open at the same time.

  There are two issues, I think:
  1. in the event that a busy workstation indicate use RAM above the 32-old bit of 3.2 GB limit?
  2 are there MS Windows Vista settings that are necessary to ensure the use of RAM available?

  Thanks in advance.

  Thanks for the reply.

  I studied the installation of AutoCAD 2009.  It's actually the 64-bit version that is installed, and the Task Manager reports it as a 64-bit application when it runs.  (In other words, it is not marked as a 32 bit application.)

  I must admit that I no longer believe that the machine is running out of resources or do not use all the resources available to it.  We tested the machine by throwing 18 complex, fully rendering the 3D drawings within the Academy, in addition to two cases of IE 8, three instances of Explorer Windows and MS Windows Mail.  Use of the RAM did climb, reaching finally the 4.06 GB, clearly indicating that the 32-bit 3.2 GB limit has been exceeded.  It seems that just drawings don't take up that much RAM.  BTW, there was no increase in the paging activity that I could see.

  However, the application does not seem to be frozen or looping when the client attempted to turn one of the drawings.  The CPU on the two wires (Xeon processor) usage increased to 55% and remained there. the State of the process, as reported by the task manager went to "Not responding" and stayed there; and the display of the image froze on an empty workspace, with a three seconds flash drawing on every 20 seconds.

  So: It now seems that there is a problem with AutoCAD, not a Vista problem.  I would appreciate comments, however, if you think that this analysis is wrong, incomplete or based on wrong assumptions.

  Thanks for your help.

• I have problems with my DNS does not. It happens every day.

  I'm having problems recently with the DNS does not.  However, it is not a constant problem.  I have access to internet, and then a few hours later will have no access.  It went back and just 3 times in more than a few days., I do not have anything to temporarily solve the problem, it only happens on its own. This occurs regardless wireless or direct.  Thank you...

  original title: DNS is not responding

  Hello

  
  1. what operating system is installed on the computer?
  2. were there any changes (hardware or software) to the computer before the show?
  
  Method 1: Perform the steps mentioned below and see if the problem persists.
  a: click on the button "Start".
  b. in the search box, type "invite."
  c. in the list of results, right-click Guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  d. at the command prompt, type ipconfig/flushdns.
   
  Method 2: Click on the link below and see if the problem occurs.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/i-keep-getting-this-message-your-computer-appears/7b1f225b-5936-495e-be3d-9ec1d074d3b5
   
  Method 3: Click on the link below and see if the problem resolves.
  http://support.Microsoft.com/kb/928152
   
  
  Hope this information helps.

• 2542: problem with cartridge - mail does not

  I have a problem with printing (scratches on print). Contacted HP via support form and received a mail that I get a new cartridge. So far so good.

  In the HP E-mail additional requests for information (address details), replying to the email does not work, and there is also no way to share the info with HP. How to proceed?

  Hello

  I've included a list of country phone numbers support in the link below.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

• Windows Vista Home Basic - problem with the icons does not meet various Windows services after trying to download updates

  I use Windows Vista Home Basic on a Dell Inspiron 1501.  I have recently accepted that some guest downloads Windows with terrible results.  First downloads do not appear to have been accepted and the system of guard stop and startup trying to cancel.  Second as I result, I seem to have lost access to a range of Windows tools.  For example in Panel I can't open system icons or Windows Update.  Nor can I access these services from any other avenue on the computer.  Whenever I have find an icon or a file screen flashes a dialog briefly and then disappears.  The effect of this is that I'm completely unable to access or to implement the recommended tools or services that could solve this problem.  My ability to manage my computer has been reduced to zero.  Dell were not receptive and I can't get a response from Microsoft

  worm post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  One thing you can try try the system restore, safe mode.

  Start the computer in safe mode with networking capabilities (hold DOWN F8 while the computer starts).

  To start your computer in safe mode, you can check the link below:http://windowshelp.microsoft.com/Windows/en-US/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx>

• I have a problem with the touchpad does not not on Windows 7.

  Original title: help. My touchpad scroll has stopped working.

  I have a laptop of Acer Aspire 5750z-4830. Touchpad scrolling does not scroll when I try. How can I put it to the top after that I took it to be repaired? Since I got it home now it won't work. And I don't have the cd to reinstall.

  Hello

  Thanks for posting your question in the Microsoft Community forum. I understand that the touchpad scroll has stopped working.  I'll help you with this problem.

  Before troubleshooting, provide us with information.

  1. don't you make changes to the computer before this problem?

  This problem may occur if there are some differences in the file system or the associated scroll Touchpad drivers. Follow these methods:

  Method 1.

  Open the hardware and devices Troubleshooter: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter

  Method 2.

  You can also follow this link and check if that helps.

  Mouse, touchpad and keyboard under Windows problems: http://windows.microsoft.com/en-us/windows/help/mouse-touchpad-and-keyboard-problems-in-windows

  Method 3.

  Check if control panel touchpad mouse is enabled or not. Follow these steps.

  1 - click on 'start '.

  2 - Select 'Control Panel' click the icon of the '' mouse. '' If you don't see the mouse icon, select Classic view of the control panel.

  Tab 3 - Click the "peripheral" in the window that appears. Select the 'enable '.

  4 button - Click on the 'apply' and select 'OK '.

  Method 4.

  Alternatively, you can also try the following steps.

  1 - Locate the "Fn" button in the lower right or left side of the keyboard of the laptop. The 'Fn' key has different text color on it or the key itself is a different color.

  2 look for the function key (F1-F12) on the top of the keyboard that disables or active the touchpad on the laptop. The key usually has an icon that looks like a touch pad with a finger touch she or a touchpad with a diagonal line through it.

  3 - Press "Fn" both the touchpad function key simultaneously to reactive the touchpad on your laptop. Move your finger on the touch pad to make sure it works. Press to disable the touchpad again at any time.

  If you need help on this particular issue or any other related Windows issue, let know us and we will be happy to help you.

• Another problem with socket: socket does not receive the although it is ready

  Hello!

  I read a lot of discussion about the casings, but I wasn't able to find a working solution:

  I know that RIM has changed many things in this regard in the OS 5.0, but I would like to improve my old 4.7 code so that it works on both BONES.

  I have a socket connection between my desktop pc and my BlackBerry storm (and "BOLD"). It works fine on 4.7 well everything what socket sends is mixed to the top when it arrives. That is not the real problem, but if someone has a tip for me - would be great!

  For this I use wap2.

  5.0 it sends all clear (large), but my code reception does not work. He knows what data happens by checking. the InputReaderStream ready(). I think it works, it's always a good time. Then, I'm reading by. read(). Still, it blocks and waits while there is something. But it does start to read something (!) until the connection is closed by the other side (my desktop pc).

  Can you give me a clue what I'm doing wrong?

  This only happens on the device, not in the Simulator!

  That's what I tried:

  -with the help of a DataInputStream (I wasn't able to find a difference)

  -using another overload of. read()

  P.S. Get rid of InputStreamReader and use the InputStream.read (void) method directly to read a byte at a time.

• Strange problem with HorizontalFieldManager - it does not show on real device bitmap

  I have a rather strange problem with the HorizontalFieldManager on my Blackberry 8820, which I did not on the Simulator, or done other blackberries that I tried to install my game.

  The problem is that bitmaps that I add, do not appear on the actual device, as in the images below. The code is provided below as well. No idea how to debug, or resolve is appreciated.

  Here's what I see on Simulator and some devices

  

  Here's what I see on the real blackberry:

  

  Code:

  ......

  OK, I found the solution - the problem is that there seems to be a bug where you can't put more fields button radio on a horizontal layout manager with 4.2.2.x.

  The solution is to extend the RadioButtonField field and replace the positioning method:

  RadioButtonField radioField = new RadioButtonHack ("", textureGroup, isSelected);

  SerializableAttribute public class RadioButtonHack extends RadioButtonField {}

  public RadioButtonHack() {}
  Super();
  }

  public RadioButtonHack (String label, group RadioButtonGroup,
  Boolean selected, long style) {}
  Super (label, group, selected, style);
  }

  public RadioButtonHack (String label, group RadioButtonGroup,
  Boolean selected) {}
  Super (label, selected group);
  }

  public RadioButtonHack (label As String) {}
  Super (label);
  }

  Protected Sub layout (int width, int height) {}
  int temp = this.getPreferredWidth ();
  setExtent (time, height);
  Super.Layout (time, height);
  }

  }

  resolved http://supportforums.blackberry.com/t5/Java-Development/radiobuttonGroup-related-problem-in-storm/m-...

• Several problems with Windows 7: does not on our programs

  First of all:

  I have Windows 7 Home Premium 64 Bit (6.1, Build 7600) I had Dell upgrade Vista 64-bit. It's on your laptop Studio XPS 1640. Intel Core 2 Duo CPU P8600 @ 2. 4 GHz, 4 GB RAM, ATI Mobility Radeon HD 3670

  The problems I encounter are:

  Does not not about our different programs: Firefox, IE (I tried Chrome and had the same problem and uninstalled), pictures folder... everything.

  Update (Windows 7 for x 64 systems) KB981793 KB982381 (a security update for Internet Explorer 8 for Windows 7 for x 64 systems) want to always sit, close my computer and then take forever to "Update" only to tell me, they do not have.

  My hotkey ejection has not worked since I upgraded to Windows 7. (Which seems not that bad of a problem).

  And finally, and most importantly, I got the blue screen of death a couple of times that said something about a Kernel error and 0 x 00007 or some number of zeros. He always stops before that I can write anything.

  Various other threads suggested to uninstall my Antivirus, so I did just that. (It was Microsoft Security Essentials). Please help :(

  Hello Phrixy,

  Thanks for posting in the Microsoft Answers forum! Your question is still there while inSafe Mode? If so, you try to run a SFC scan for troubleshooting the corrupted system files on your PC.

  To perform a scan of the SFC, follow the steps on the following link: How to use the tool File Checker system to troubleshoot missing or corrupted system files on Windows Vista or Windows 7

  You can also try a clean boot troubleshooting method to see if it helps you solve your problem.

  Please let me know if this helps J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Problem with the laptop does not connect to wifi.

  I have a new laptop to windows 8 toshiba still in the menu setup and he asked me to choose my wifi so I did and put the password and its says unable to connect to wifi, all other laptops and tablets are connected to wifi I chose but its only the my laptop which does not connect. What should I do?

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message? If Yes, what is the exact error message?

  To solve the problem with Wi - Fi internet access, you can follow these methods:

  Method 1:

  I suggest you to refer to the article and see if it helps:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problems

  Method 2:

  I suggest to refer to article and follow these steps:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Let us know the results. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• Having a problem with my page does not stop scrolling?

  Hi, I am very new to Muse and have been plugging away learning and design. I came across a new issue where when I go to preview my site, that my pages are not self limiting the amount of content I have on her page, if that makes sense.

  On one page, I have a picture of style small hovering with a small text below, does not come close taking over my office around, but there are still some amount scroll down on the page. On another page I have an image gallery and if you scroll down it just guard putting a space more photos below and you can scroll basically forever. Any contributions to this issue would be greatly appreciated.

  Thanks, Ben

  That's great! An easy solution: simply omit the widget!

  I paid for the widgets (like others) that presented of problems... when all else fails, stick to what provides the Muse. Frustrating at times, but they do not work.

  (Can also be useful to meet with the developer and asking for a solution/explanation)

• Problem with complex schema does not

  Hello

  I created the fairly complicated pattern: http://i.imgur.com/Wt2Bo7w.png

  And when I'm playing with him (some pathfinder to the cutting edge etc.) Illustrator is "not responding" problem and after a few minutes it comes back to life (with process finished). It's weird because my machine is pretty good and Illustrator, while that "does not" use only 30% of my CPU and about 6 GB of ram (I've got 16 GB). Is there a way to make it faster? What would you recommend?

  Try using fill patterns.

  Or try to use overlays raster graphics

• Problem with Photoshop CC does not work after update

  I downloaded and installed Photoshop CC yesterday and worked with it without any problems. This morning, the cloud said that there is an update

  So I installed which.

  Now, the program will open but it does not meet anything, I can't access any of the Menus or load an image. The only way I can close

  is the hit Control-Alt-Delete.

  What can I do to fix this?

  David

  Hi dneely101,

  Please see the Ko: http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html .

  Kind regards

  Romit Sinha

• I'm having a problem with my flash does not videos in youtube and loading games on facebook. Any ideas?

  Videos won't load on youtube.
  Games will not load on facebook.

  Hello ron, this is most likely a problem in the context of the recent update of the adobe flash plugin, please see the following article for common solutions: 11.3 Flash does not load video in Firefox