ProBook 430 G3: cannot find the sata setting in bios

Hi, I bought a G3 Probook with FreeDos preinstalled

The config includes i5-6200U and 128 GB SSD

I am trying to install Win 7 64 bit and when it starts on the USB drive and I select language and click on install it keeps listening on CD/DVD not detected and suggests to load the driver - it seems that it can't detect the internal SSD flash drive

I looked in the forums and recommended to find the setting of SATA - IDE/AHCI, but I could not locate in the BIOS... the version of bios is 01.03

Any ideas how I can do Windows Installer detects my internal SSD?

Thanks in advance!

UPDATE: I tried to use diskpart during installation and he did not see the SSD drive, so I guess that the DIF is with smth else... Please help, I am completely stressed because it's totally new laptop

FOUND THE SOLUTION

It seems that the problem was with USB 3.0 - for some reason drivers any, that none of the 3 ports did not run as 2.0 (())

So I downloaded the driver and copied package on the SSD, and when prompet during the installation he merely indicated to the place with the drivers - worked well. Hope this helps someone as well

Tags: Notebooks

Similar Questions

  • Cannot find the SATA HD

    Trying to install ESXi 5.0, 5.1, 5.5, or 6.0, and none of them can find a hard drive.

    ASUS W97 Plux Xeon

    SATA Controller: Intel Corporation device 8 c 82

    5 TB WD SATA HD

    See attachment.

    No hard drives the remote or are found.

    I have the job of network card and I can install on a USB key, but I can't all of installs it recognize the hard drive.

    What is the best way to make this work?

    Hello David, and welcome to the forums!

    You are using unsupported hardware. but you can get your SATA controller that works by installing my package of sata-xahci from here:

    https://vibsdepot.v-front.de/wiki/index.php/SATA-xahci

    Andreas

  • Having problem bing as my toolbar setting. Cannot find the menu box

    having problem setting 'Bing '.

    Having problem bing as my toolbar setting. Cannot find the menu box in Google Chrome according to your instructions

    Hello

    • What is the version of the Windows operating system?
    • Are you facing this problem only with Google Chrome?

    Check the problem with Internet Explorer and post your result.

    However, if you use Google Chrome, contact Google Chrome support team.

    http://support.Google.com/chrome/bin/request.py?&contact_type=contact_policy

    You can also post your query in Google Chrome Forum: http://productforums.google.com/forum/#! forum/chrome

    It will be useful.

  • Backup has encountered a problem in file C:\Users\Laura\Saved backup sets. Error: (the system cannot find the specified file. (0 x 80070002))

    How can I stop this error after completing a back-up?

    Hello

    Thanks for posting the request in the Microsoft community forums.
    I understand that you are facing a problem when saving the file. I will definitely help you with this.
    Please answer the following questions.

    1. where exactly you are trying to save the file?
    2. what anti-virus software is installed on the computer?
    3. don't you make changes on the computer before the show?

    This problem can occur for the following reasons:

    · The computer stops responding.

    · The copy operation stops.

    To resolve the error "Backup has encountered a problem during backup of the file C:\Users\Laura\Saved games. Error: (the system cannot find the specified file. (0 x 80070002)) "on the computer, you can try the following steps:

    See the steps in the link and check:

    0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7
    http://support.Microsoft.com/kb/979281

    Hope this information helps you. If the problem persists, feel free to let us know. It is our pleasure to be of service.

  • Cannot install VMware ESXi 4.1 "cannot find the image of the installed system.

    Started in iso ESXi 4.1 downloaded, burned on a CD, CD, go to the screens, press F11 to install.  Immediately get the following error:

    -

    The installation operation failed!

    The installation operation encountered a fatal error:

    Cannot find the image of the installed system.  This is due to the image being not mounted correctly or the CD-ROM not supported.

    -

    The material is a system of handcrafted with Intel DQ35JO Council, latest version of the BIOS, Intel E6850 CPU, 8 GB of RAM, 2 SATA drives.  I know this isn't on the list compatible but is a 'white box '.  I installed ESXi 3.5 on it in the past and got it working, and I saw other success stories with this Board/CPU.  Yes, I have activated the virtualization mode in the BIOS and powered down/up.

    Here is what I tried:

    -Redownload VMware-VMvisor-Installer - 4.1.0 - 260247.x86_64.iso to ensure that it was not corrupt (2 copies, against perfectly)

    --Also tried another drive (IDE) CDROM

    -Created a bootable USB using uNetBootin 4.7.1 and booted from it

    -Switched SATA setting in the BIOS from AHCI to IDE

    I get the same exact error.  I searched here and everywhere and don't find any reference to this error.

    Help - all do you offer for my next step?

    Have you had a previous vSphere installed on your system?

    I had the same error on my 'white box' (in fact, it is black).  I used to run esxi 4.0 (u2) on my Acer X 3300 (6 GB, Quad Core AMD Athlon II).  Controllor internal SATA is not supported, but it allows me to use the box for normal windows task and ESXi is sitting on a SDHC 4 GB flash card.

    When I started my freshly burned ESX4.1 cdrom, I got the same error.   I thought that the fact that maybe there was an existing install on my destination drive (the flash memory card), and that the CD could not perform an upgrade.

    So, I tried the upgrade path (first trying to utility of the host and the .xml error message).  After reading the manual, I did the upgrade from 4.0 to 4.1 using the device of vMA and I must say that esxi 4.1 works great on my white box.

    Then I suggest that you try upgrading and see how far that gets you.

    Good luck (and a beautiful weekend)

    Marino

  • ESXi 4.0 Dell T105 "cannot find the boot partition.

    Dban Nuke used to wipe my hard drives (two of them).

    Unplugged the secondary hard drive.

    Installed ESXi 4.0 (declared success).

    Machine starts, starts in ESXi 4.0, starts to load, then:

    "Cannot find the boot partition.

    Others have suggested to set parameter SATA AHCI controller. Not possible in my BIOS. I 'ATA Mode' and 'Off '. "Off" turns off the entire controller and my hard drive is not recognized.

    Others still suggested to install on a USB key. Wary of such a hack...

    Help, please. There is very little out there on ESXi 4. Even a pointer to VMware documentation with a list of error messages and their meaning/solutions would be helpful (unable to find such a list myself).

    I had the same problem that others are with the start-up for the drives. I went with the USB boot and it works very well because it has an internal USB port, it works even better because I'm not burn an external port. I use an older version of BIOS that does not start USB ports have enough fast for the key USB is recognized from a cold start *bummer* but not a big deal. Once this is done, I'm off the coast and run very well.

    I would recommend going this way until someone comes up with a better alternative, which I would be interested in doing.

  • Access cannot find the macro

    Hello everyone!

    I have a damaged database. I decided to try to restore. VD, I created a new database and imported all the tables, queries, forms, reports, macros of corrupted to the new database.

    However, when I try to open most of the forms, I get the error message:

    "Microsoft Office Access cannot find the macro 'TrackDBaseForms '.

    The macro (or its macro group) does not exist, or the macro is new, but has not been saved... »

    This basis has worked for a year, and I never had this problem. A Google search returns no results. However, it is obviously not in the macros page, or in any code I can find.

    I have supports this database for a year and have never encountered this missing macro. A Google search returns no results, so I guess it's something that the developers at the beginning. However, it is obviously not in the macros page, or in any code I can find.

    The corrupted database is such a State that it will not be open to all: the main form that is set to open at startup corrupts. MS Access 2007, size 500mg.

    Thank you!

    Have u tried looking for hidden objects?
    Go to Tools/Options and view the hidden objects to open the database without starting.  You can press the SHIFT key , and then open the DB. Note You may need to do this a few times.

    I hope that this recommendation will help you. In extreme cases, you can restore the data file via the repair tool of ms access as the Access Recovery Toolbox . http://www.oemailrecovery.com/access_repair.html  

  • Cannot find the .inf to install HP 5600 print server port

    I try to add a server port to print to my printer HP 5600 on Win 7.

    Go to "Properties of the print server" select port and get message 'new port type' print server ' food printer inf to install the port monitor intilation information. »

    Cannot find the INFs on any CD progrm supplied with the printer.

    How can I add a 'print server port' to the printer if my USB Linksys printserver. This print server works fine on my other computers on my home network.

    Finally found how to manage the Linksys. You must set up a TCP/IP port not a port of the print server.

    Link http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=22034

    complete set upward for win 7

    Bob

  • Cannot find the printer HP Deskjet 3055 has wireless

    Hi bought this printer and went through the set up disc. The printer is connected and has the right signal to our home network and the laptop also connects wirelessley to the internet just fine. The laptop cannot find the printer - I tried all the suggestions and put the IP address for internet search and it will not. I can't understand. Also tried to install on the MAC laptop and still only goes up to now and then are unable to communicate with each other. Please can I have some advice.

    Oh, wait a minute--I just got it working by stopping laptop, printer and disconnect the wireless router and all start back them up again. Then to try to make it work on the MAC laptop - what this space! Thanks for the help.

  • After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer

    After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer. Also I can't 'manage' my computer because I do not have "permissions". I tried a fix he 45071 and it did nothing.

    Applications, (Norton and McAfee) (including free evaluation versions are notorious for not not upgrade (or uninstalling) itself.) If NIS has been installed for 3 years, you have NIS update at least once and maybe twice (e.g., NIS 2009 > NIS 2010 > NIS 2011).

    [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

    1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    2. close all open applications (that is, anything with an icon on the taskbar).

    3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) viaControl Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

    4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

    NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

    5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

    6. do a clean install of NIS 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

    NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

    7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

    8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

    9. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]

    10. restart once again & test.

    NB: Installation KB971029 disables AutoRun/autoplay on USB connected but not 'brilliant media' external drives (i.e., CDs & DVDs). See http://blogs.technet.com/b/msrc/archive/2011/02/08/deeper-insight-into-the-security-advisory-967940-update.aspx

    ~~~~~~~~~~~~~~~~~~~~~~~~
    [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Impossible to delete the "cannot find the specified file. Be sure to only specify the path and the correct name?

    For sum reason my computer just started to do the following when I try and delete a file or move a file from one place to the other.

    I am the administrator and the file is there.

    Failed to remove "" cannot find the specified file. Be sure to only specify the path name and filre coeerct.

    Help!

    Perry

    Hi KAD Rebar,.

    1. Did you the latest changes on the computer?
    2. When was the last time it was working fine?
    3. Are you having similar problem with all the files you are trying to move or remove it from the computer?
    4. You have security software installed on the computer?

    Method 1

    See the link below and run the Fixit tool available, check if it helps.

    Diagnose and repair Windows files and folders problems automatically

    http://support.Microsoft.com/mats/windows_file_and_folder_diag/

     

    Method 2

    If the previous step fails, then I suggest that you start the computer in safe mode and check if the problem persists.

    A description of the options to start in Windows XP Mode

    http://support.Microsoft.com/kb/315222

    If the problem does not persist in safe mode, then it is possible that some third-party programs installed on the computer is causing the problem.

    I suggest that you put the computer in a clean boot state and check if it helps.

    To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See section to learn more about how to clean boot.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    (a) click Start, type msconfig in the search box and press ENTER.

    (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

    (c) under the general tab, click the Normal startup option, and then click OK.

    (d) when you are prompted to restart the computer, click on restart.

  • Update Windows XP SP3 is abandoned during the installation of UNIDRV. DLL and displays the message "the system cannot find the file specified."

    When the update of Windows XP is install SP3, the sequence is abandoned at the location of the process.  After you download the SP3, the progresses set install through the normal initialization sequence, inspection, creating list of 3rd drive part, backup files, etc., begins to install the files but when to reach the "UNIDRV. The installation of the file "DLL" stops and I get a message "the system cannot find the file specified".  The close message will invalidate all the installation and possible automatic restart.  I did not locate a UNIDRV. DLL file and copy it to my C:\ root directory but have tried almost everything in the 22/01/12 'terribrownQF' and the response "Tommy Stanley" 22/01/12 no change where the installation of SP3 crashes.  Should I try to put the UNIDRV. DLL file on my computer?  Any other ideas?

    Please respond to each of the following diagnostic questions in a numbered list type in your very next answer (no need to quote this post):

    1. What is the full name of your application or the installed antivirus security suite and when (date about) is your subscription current expires?  What (other than Defender) anti-spyware applications are installed?  What third-party firewall (if applicable)?

    2 a Norton or McAfee application ALREADY installed on the computer?

    3. do you have a free trial Norton or a test of free McAfee [CHOOSE ONE ANSWER] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

    4. why has not been installed SP3 years? [1]

    5. is Firefox, Chrome or any other alternative browser installed?

    6. are you familiar with "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; RegClean Pro. Advanced SystemCare. Registry Booster; McAfee QuickClean. AVG PC TuneUp. Norton Registry Cleaner; PCTools optimizer; SpeedUpMyPC; PC Doctor; TuneUp Utilities; WinMaximizer; WinSweeper; Comodo System Cleaner. Advanced System Optimizer. CCleaner)?

    7 have you ever had the opportunity to do a repair install or clean install of Windows XP for some reason any?

    =====================================================================
    [1] note: support for WinXP SP2 ended the July 13, 2010! "Computers running WinXP SP2" will no longer receive software updates from Windows Update "[i.e., updated on and after August 2, 2010 so now that you're missing more than two years worth of updates to security critical! ] until SP3 has been installed.

  • Cannot install on XP Pro SP3: "Service Pack 3 Setup error - the system cannot find the file specified."

    I am trying to install SP3 on my XP Pro.  I get a notice on my screen, stating: "Service Pack 3 Setup error - the system cannot find the file specified."  Don't know what I'd do.  Thank you.  Peter glass

    That's good news. I think you also need to analyze of rootkits being on the right side. So, now:

    Search for rootkits with a program SPECIALLY designed to detect and remove the (aswMBR):

    Download this file to your desktop. Double-click the icon to run the program. When the opportunity to download and install the latest Avast definitions do.
    Run a scan. Results in red indicate that this was not a false positive! Do you need to remove the rootkit (including "FixMBR" if necessary).

    And finally, leave your PC on overnight and search for viruses, using this site:
    Once we are convinced that your PC is clean, here are my instructions (just in case where you still cannot run batch of Geek-Tech file, etc.):

    1. download the installation of SP3 and IE8 (beforehand) files. I prefer to keep these (and other useful files) on a USB key, but this is optional. Here are the links for the installation files:

    http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)

    (You can TOTALLY ignore the message "intended for it professionals"!)

    http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)

    (You need to install IE8 AFTER SP3! Trust in me.)

    IMPORTANT NOTE!

    It is VERY important to ensure that Internet Explorer is at the level IE6 before installing SP3. In case you have IE7 or IE8, you must uninstall it / them, using the Control Panel Add / Remove programs. Let us know if you need assistance with this.

    Once again:

    Make sure that IE is IE6 level before installing SP3. You can go directly from IE6 to IE8 after SP3 has been installed.

    2. disconnect Internet. Also unplug all unnecessary devices.

    3. temporarily disable the automatic updates. To do this:

    Start | Control Panel (switch to Classic view if not already selected). Automatic updates

    4 set up a clean boot. The last thing you need is for a program that runs in the background to interfere with these updates! (It happens!) For more information:

    http://support.Microsoft.com/kb/310353

    (Note that this is the same as setting up a "Diagnostic boot.")

    Reset.

    5 install the SP3. Restart TWICE.

    6 switch to IE8. Restart TWICE.

    (What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).

    7 unscrew the clean boot. (That is, return to the Normal startup).

    8 make sure that firewall Windows is activated (it should already be):

    Start | Control Panel | Security Center

    9 visit Windows Update to download and install only the critical security updates. Restart each time you are prompted.

    10 re - enable automatic updates.

  • The MCSTRM service failed to start due to the following error: the system cannot find the specified file

    My computer starts rather suddenly gel with many applications.  Today it froze again once I finished a long email and was about to send.  I lost him of course.  My Event Viewer was the topic.  Event 7000, Service Control manager Eventlog.

    What can I do?  I have Vista SP2 64-bit.

    I'll add that the kernel_driver of Type 1 mcstrm following 1 State arrested Win32_exit_code 2 <0X2>Wait_hint Checkpoint 0 x 0 0 x 0

    Please... any help to fix... my computer keeps freezing. and I will need to get a new laptop or an Ipad, if the problem persists.

    Thank you

    Candy C:\Users\David> net helpmsg 2

    The system cannot find the specified file.

    Is that error on this post code, IE something deleted, probably your antivirus or you.

    For problems to explore, which has nothing to do with this post, try this (which covers almost any problem).

    Explorer

    Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).

     

    To see if a fix is available

    In Control Panel (and select Classic discovered in the left pane) select reports on the problems and Solutions (problem of type in the START search box), go to historical problem, right-click of your error and choose check for the Solution.

    You can also right-click and choose Details for more information. Post these details here. The name of the Module fault is important information.

    If the problem affects Panel press the Windows key + R and type wercon (or type it at a command prompt).

     

    Close the browser and start a command prompt

    • Close Windows Explorer
    • Start - All Programs - Accessories - right on command prompt and choose run as administrator.
    • Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
    • Press Ctrl + Alt + Delete then Task Manager.
    • Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.

    Then to restart the Explorer after trying all of the following

    • Press Ctrl + Alt + Delete and choose Task Manager
    • In the Task Manager, click the file menu and then click new task (run) and enter explorer
     

    If you cannot start the Explorer at all

    • Press Ctrl + Alt + Delete and choose Task Manager
    • Under the processes tab, click Show processes from all users to elevate to administrator
    • In the Task Manager, click the file menu and then click new task (run) and type cmd
    • Other things you can try typing

      Explorer
      Explorer c:\
      Explorer/e, c:\
      wercon
      control
      Iexplore
      Rstrui

    If you cannot start a folder window you can use the Browse button in the new task dialog. Don't forget that you must right click and choose Open rather than double-clicking.

     

    Reregister the shell registry entries

    It is important that each order is accepted. If the command fails it means the file is damaged and must be repaired.

    Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

    regsvr32 /i shell32
    regsvr32 /i urlmon.dll
    regsvr32 RPCRT4.dll
    regsvr32 PROPSYS.dll
    regsvr32 MSCTF.dll
    regsvr32 cscui.dll
    regsvr32 rsaenh.dll
    regsvr32 timedate.cpl
    regsvr32 ATL DLL
    regsvr32 OLEACC.dll
    regsvr32 actxprxy.dll
    regsvr32 USERENV.dll
    regsvr32 msshsq.dll
    regsvr32 NaturalLanguage6.dll
    regsvr32 thumbcache.dll
    regsvr32 WINTRUST.dll
    regsvr32 MMDevAPI.DLL
    regsvr32 audioses.dll
    regsvr32 audioeng.dll
    regsvr32 ExplorerFrame.dll


    regsvr32 msi.dll
    regsvr32 FirewallAPI.dll
    regsvr32 netshell.dll
    regsvr32 pnidui.dll
    regsvr32 QUtil.dll
    regsvr32 c:\windows\system32\wpdshserviceobj.dll
    regsvr32 WINHTTP.dll
    regsvr32 C:\windows\system32\qagent.dll
    regsvr32 C:\windows\system32\portabledeviceapi.dll
    regsvr32 wbemprox.dll
    regsvr32 wbemsvc.dll
    regsvr32 fastprox.dll
    regsvr32 imapi2.dll
    regsvr32 wshext.dll
    regsvr32 gameux.dll
    regsvr32 msxml6.dll
    regsvr32 vbscript.dll
    regsvr32 jscript.dll
    regsvr32 wshext.dll
    regsvr32 wshom.ocx
    regsvr32 wshcon.dll
    regsvr32 scrrun.dll

     

    Delete the folder and the settings of the Menu

    This will remove the settings are saved for each file that you visit. Also the order of the start menu and pinned list settings.

    Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

    Reg delete "HKCU\Software\Classes\Local Settings\Software\Microsoft\Windows\Shell" /f

    Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Streams" /f

    Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StuckRects2" /f

    Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StartPage" /f

    Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\MenuOrder" /f

    Delete the thumbnail and icon Caches

    Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

    attrib - r s h '% userprofile%\AppData\Local\*.db '.

    attrib - r s h '% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db '.

    del "% userprofile%\AppData\Local\*.db".

    del "% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db".

    Disable thumbnails and previews

    Damaged documents and particularly corrupt pictures or videos, can cause Explorer crash all trying to generate a thumbnail or an overview. This miniature and previews active option off.

    If you can start the Explorer, previews is Union on the command - folder and Search Options - framework of tasks use classic Windows foldersbar.

    Thumbnails are organized on the command bar - folder and Search Options - view tab - and check under Advanced settings - always show icons, never thumbnails and uncheck Show icon file in the pictures.

    If you cannot start the Explorer close Explorer as above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

    Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "IconsOnly" /t Reg_DWord /d 00000001 f

    Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowPreviewHandlers" /t Reg_DWord /d 00000000 f

    Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowTypeOverlay" /t Reg_DWord /d 00000000 f

    Turn around after testing the Explorer.

    Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "IconsOnly" /t Reg_DWord /d 00000000 f

    Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowPreviewHandlers" /t Reg_DWord /d 00000001 f

    Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowTypeOverlay" /t Reg_DWord /d 00000001 f

     

    A boot is a way to explore

    It can be caused by a shell extension.

    Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).

    The Explorer is built on addin programs called Extensions of Shell. The standard is provided by Microsoft, but programs add their own.

    • Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
    • Close Windows Explorer
    • Start Autoruns by right-clicking and choose run as administrator
    • Click on the menu Options - Filter Options and check hide Microsoft entries and disable include empty locations
    • Go to the Explorer tab and uncheck everything to the left.
    • Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
    • Press Ctrl + Alt + Delete and choose Task Manager.  Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.
    • Click the file menu and then click new task (run) and enter explorer

    If this can help, reactivate ½ at a time to identify those who. If this does not help, restart AutoRuns and go to the all tab and uncheck everything that it and restart. If this can help, reactivate ½ at a time to identify those who.

    Run Microsoft Fixit

    Microsoft has a range of automatic programs to solve common problems. To see problems explore

    http://support.Microsoft.com/mats/windows_file_and_folder_diag/en-us

    For the visit of the list the most comprehensive

    http://support.Microsoft.com/FixIt/en-us

    When you choose to download, choose the option to run on another computer. You can then save it to your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

    Recycle Bin
     
    If the problem is the trash bin remove the storage folders. It will be automatically re-created next time you delete a file or open the Recycle Bin. It will remove the trash and the files it contains for all users.
     
    Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
     
    RD C:\$RECYCLE. BIN/s/q
     
    then repeat for each drive to change the drive letter, for example
     
    d:\$recycle Rd. BIN/s/q
     
    e:\$recycle Rd. BIN/s/q
     
     
    If the Office does not start
     
    This will create a new empty by user and common desktop computer. This will allow to test if a file on your desktop to start the Explorer.
     
    Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
     
    MD "% userprofile%\DesktopTest".
     
    Add reg "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" / v/t desktop REG_EXPAND_SZ /d "% USERPROFILE%\DesktopTest" /f
     
    MD "% public%\desktopTest".
     
    Tracking Add "HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" v "Common Desktop" REG_EXPAND_SZ /d "% Public%\DesktopTest" t f
     
    To restore default after having tested if begins to explore.
     
    Set ExpFix1 = % user
     
    Set ExpFix2 = % profile
     
    reg add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" / v/t desktop REG_EXPAND_SZ /d "% ". ' ExpFix1 ExpFix2%% \Desktop "/f
     
    Set ExpFix1 = % Pub
     
    Set ExpFix2 = % lic

     
    reg add "HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v "Common Desktop" /t REG_EXPAND_SZ /d "% ". ' ExpFix1 ExpFix2%% \Desktop "/f
     
    You will need to disconnect then.
     
     
    New entry missing folder
     
    If the above does not help.
     
     
    Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the NewFolder.reg.
      

  • Error: The drive cannot find the sector requested: 0x8007001B) during execution of the backup on DVD

    I tried to backup using a DVD, as usual, but without success. Back to the high status and Configuration States:

    Upward did not complete successfully
    Original title: back to the top has not completely filled.

    An error has occurred. The following information can help you resolve the error:)

    The drive cannot find the sector requested:
    0x8007001B)

    I've looked everywhere for this problem... need help :)

    Babette

    Hello

    1. have you done any software or hardware changes on your computer before this problem?
    2. have you checked with another DVD drive?
    3. using the Windows backup feature to backup?
    4 do you have third-party backup programs installed on your computer?
     
    To work on the issue, refer to these methods.
     
    Method 1:
     
    Step 1:
     
    If it's a DVD I suggest trying to backup to an external hard drive and check to see if you get any errors.

    Step 2:
     
    Temporarily disable the antivirus software and check if you are able to perform the backup.

    Caution:
    Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
     
    Back up and restore: frequently asked questions

    Set up or change automatic backup settings
    Method 2:
     
    I suggest you check for errors of hard disk on the drive you want to back up.
     
    Check your hard drive to find errors in Windows 7
    http://support.Microsoft.com/kb/2641432
     
    NOTE: the steps also apply to Windows Vista
     
    CHKDSK warning:
    Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
     
    Hope the information is useful.

Maybe you are looking for