ProBook 450 G @: ADVANCED STARTUP OPTIONS

Similar Questions

• Computer stops responding with a black screen when you start Windows XP. Cannot select anything advanced startup options

  Original title: can't open Windows
  I can't open my laptop at all... block when I select anything in the mode without failure or screen black normal mode :(
  What should I do? Thank you!!!

  Hi Mihou,

  1 have. what changes you made before the question?

  2. What are the options you see in the advanced startup options?

  You can follow the methods in the article in order to solve the problem.

  Computer stops responding with a black screen when you start Windows XP
  http://support.Microsoft.com/?kbid=314503

  Azeez Nadeem - Microsoft Support [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Put in drive problem - maintains just a loop to the advanced startup options

  My laptop with windows vista, keeping just a loop to advanced startup options and I can't get past this point, I can't reach the windows login page

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  and if all else fails and you need to reinstall vista are the normal methods for computers preinstalled vista portable

  Contact the computer manufacturer and ask them to send vista recovery discs

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

• How to determine if advanced startup options enabled

  Hello

  Can I use the command ' bcdedit/set {globalsettings} advancedoptions true' and ' bcdedit/set {globalsettings} advancedoptions false"to enable or disable the boot advanced options to appear every time you start, but once activated, how to determine if advanced startup options enabled?

  Thank you

  No, please download Boot UI Tuner of

  http://winaero.com/download.php?view.46

  Run it, you can see the option "Enable advanced startup options" unchecked, close it.

  Then run CMD as administrator, type the command

  bcdedit /set {globalsettings} advancedoptions true
  

  Run Boot UI Tuner again, you can see the "Enable advanced boot options"
  

  checked, so i think that can get the info about advanced options enabled.
  

• Satellite L300 - no option in the advanced startup options safe mode

  Hi all

  Can anyone help me to lift this toshiba Satellite and running for my sister inlaw, I currently have a model L300-149 PSLBOE (Windows Vista) here are the questions.

  1 once turned on and boots the screen goes to the boot with the following result Manager
  File: \Boot\BCD
  Status: 0xc00000e9
  Info an unexpected i/o error has occurred

  2. If I power cycle and hold / press F8 the screen won't take me in the advanced options for me to start in safe mode

  Hello

  This looks like a Windows problem. It seems that your Windows installation is muddled up and you need to reinstall the operating system.

  If you cannot access the start menu advanced in the t, you must take the Toshiba Recovery disk to restore to factory settings. Boot from that disk and follow the instructions on the screen everything that s and easy to use.

  In addition the recovery disk will delete everything on HARD drive for backup files important first. ;)

• ProBook 450 G2, core-i5: operating system not found

  Hello

  I expanded the partition of my C drive with force to upgrade to windows 10 since an iso file... then after restarting, I am facing the problem "an operating system is not found. Please remove storage external use... »

  I tried to boot from the start menu by pressing F9 while restarting, but no solution met! I also tried to boot from EFI file, but does not because no options that are there found.

  The disc is also OK, checked the BIOS settings option.
  
  Now what to do?

  Spoiler (Highlight to read)

  Asif_Ahmed_Joy

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post about the operating system not found since the Win10 Upgrade failed and tried to help.
  
  One of the things that happened during the upgrade:

  (1) it mostly completed but failed in the writing of the new boot loader files

  (2) it failed early in the upgrade, screw up your PC as well

  Allows to process 1) first - by recreating the bootloader files.

  You need access to a PC for this phase of work in order to create the necessary support to fix your PC boot loader.
  
  Once you have that, please download and create the Win10 installation media from this link: http://windows.microsoft.com/en-us/windows-10/media-creation-tool-install?ocid=ms_wol_win10
  
  Note that when you download and build install media, the default tool corresponding to what is already installed on your PC (as in home for the House, and 64-bit to 64 - bit).  While you CAN change these settings, are NOT. If you do, the media that results will be different and will force you to enter a NEW product code.
  
  Boot from the media that you have created and follow the instructions in this link: http://www.tenforums.com/tutorials/2294-advanced-startup-options-boot-windows-10-a.html
  
  You will need to go to the Advanced Options screen and click on startup repair.  You will probably need to run Startup Repair three times for him to fix all the boot loader.
  
  Once completed, your PC should start OK.

  If this does not work, then we are on option 2) - which is not good news.

  While Microsoft says there is no risk in the upgrade of Win10, because they allow you to believe that you can always return to your BONES and the original installation program within 30 days, the ugly fact of the matter is that the Win10 GoBack feature turned out to be unreliable - and when she fails, she can let machines in a State corrupted - that does not always happen , but it happens often enough to be a problem and you will get no warning beforehand that he goes to the trash your PC!
  
  If this is not enough, the Win10 upgrade is known, in some cases, corrupt partition recovery stored by the OEM that built the original machine.  It's pretty much guarantee that no HP recovery will work.

  What will work restores your computer to its original factory state using HP recovery media.
  
  It is a set of DVD and a CD or a USB key, which will erase the hard drive (removing all data, applications and settings, reinstall the original OS, drivers and utilities for HP. In some cases, you will be able to order a USB instead of discs.  You must order at HP; they cannot be downloaded.
  
  You can look online for recovery from the paged media related: http://support.hp.com/us-en/drivers
  
  Once there, enter your product name or number. On your software page and download the drivers, select your operating system and version. Click on "Update".  If the HP recovery support is available for your computer, down near the bottom of the page, you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entty and click on order to press for more details.
  
  Or, if you prefer, you can do the same by contacting HP Customer Service:
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!
  ---------------------------------------
  However, HP customer care is generally not available on weekends, so you will have to wait until Monday to contact them.
  ---------------------------------------

  Don't forget to read through the material in the linked thread before attempting the recovery: http://support.hp.com/us-en/document/c00707939
  
  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• interrupted vistas system restore and now it does not start at the top. The only way I can access advanced boot options is by pressing F8

  Then I tried to start Windows normally or in Mode safe and it does not work.

  None of these advanced startup options work effectively.

  When I turn on the laptop, the VAIO large appears and then Microsoft corporation and then a quick start of blue, then it tries to restart again again and again until I hit F8.

  I hope this can be repaired.  Thanks in advance for anyones help.

  Hello

  as none of the advanced startup options does work, try this:

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• cannot reset the computer to factory setting, there is no repair your computer in advanced boot options, help

  try to reset the computer to factory, computer settings broken, lost all my icons on the desktop, pictures computer guide laptop dell inspiron 1525 was told to go to boot options advanced and scroll down to fix your computer ect, and there is no such key. any other ideas?  Unfortunately, I'm not under warranty, so I can't even help from the dell support site

  Restart your PC and hit the F8 key several times (once every second must
  work) until you get the menu Advanced Startup Options. Select ' repair your»
  computer"then select system recovery and Startup Repair Options.
   
  http://bit.LY/9rV2SB
   
  If you don't see the "repair your computer" option, you will need start
  from a disk recovery or your Vista installation CD. If you do not
  an installation disc, you can create a disc of recovery of these directions:
   
  http://bit.LY/RX30K
   
   
  "Tuesday9876" wrote in message news: c4ee6fb1-6e86-415a-ad9c-1e13c9322ae7...
  > try to reset the computer to factory settings, broken, lost all
  > my icons on the desktop, photo ect, told computer guide laptop dell inspiron 1525
  > to access boot options advanced and scroll down to repair your
  > computer, and there is not this button. any other ideas? Unfortunately I have
  >'m not under warranty anymore, so I can't even get help from the dell printer
  > support Web site
   
   
   

• Cannot start on the screen and can not access early startup options

  Original title: no access "advanced boot options".

  I've had my new Sony Vaio laptop for a little less than two months now, it came preloaded with Windows 8. However this afternoon after startup, I got a blue screen, followed by the message: "repair disk errors. It may take more than an hour to finish '. After less than 10 minutes, it restarted itself, only to start on a black screen with a cursor. When I stop or put it to sleep, it will start ONLY at the back screen after a short while on its loading screen "VAIO". Windows does not make me a "Advanced Boot options" as it should, so I have no access to any system restore, update them or safe mode options.

  The only thing I've been able to think is to ask a Windows 8 install disc my manufacturer because I don't have access to an iso of windows 8 DVD/USB to boot from. Are there other options I can try as I wait to hear from Sony on an installation disk? I am so far not impressed with 8 in all, the system "Advanced Boot options" auto seems ridiculous to me.

  I looked at the options for creating the installation of Windows 8 media, and I have access to another computer running Windows Vista to create this, but I don't have access to a product key of Windows 8, because my Sony notebook came with the operating system pre-installed, and I couldn't find a key product or on the laptop itself , or anywhere in the documentation that accompanies it. For this reason, the Installation of Windows 8 media doesn't seem to be an option for me.

  However I saw a feature on my phone that allows me to start directly on the boot advanced options. an assist beside my power button which, when I hold while the laptop is turned off, starts directly at the menu said.

  Now that I have access to advanced startup options, I tried an auto-recovery, he said was not possible, and I also had the same thing when you attempt a system refresh, so was the only thing I was able to reset to the factory settings.

  I still have no idea what triggered the problem, or why it was not possible for automatic retrieval or update it, however it seems to work fine now that it is restored to factory settings, though not ideal or practical.

• Laptop HP Probook G2 450: there is no option of finger printing in HP simplepass

  Hello

  There is no option of the use of fingerprints as a password in HP simplepass please help me

  You can see in attachment

  Thank you

  Laptop HP Probook 450 G2

  64-bit Windows 8

  the software is install and uptodate

  

  Synaptics (validity) (American International) fingerprint sensor driver

  YAhooo just install above software and his work thank you

• ProBook 450 G1: Lit for Probook G1 450 keyboard

  Eventually, I would like to replace the keyboard on my laptop (Probook 450 G1) to a lit keyboard - is it possible?  If Yes, where can I buy one, and where I could find step by step Guides HP to replace the keyboard?

  Thank you in advance!

  Hello

  The series has only the following option:

  Keyboard full size, resistant to spills, touchpad with area scrolling and gestures of support, power button, 2 launch buttons (power and mute speaker Wireless), function keys, keypad separate complete digital

  Source: HPProbook450G1NotebookPC_datasheet

  Therefore, NO connector on the motherboard for you connect all the "lights" for the keyboard.

  Kind regards.

• ProBook 450 G2: Slow WiFi

  Hello

  I have quite annoying problem on my Probook 450 2 Win7 64 bit authentic. WiFi speed is terrible slow and sometimes unstable, however original driver from Realtek RTL8723BE 802.11b/g/n has been installed since the HP Web site.

  Have an idea to solve this problem?

  THX, M.

  1. open the Device Manager

  2. develop the network card

  3. double-click on Realtek RTL8723BE 802.11 b/g/n WiFi Adapter

  4. go to the power management tab

  5 uncheck allow the computer to turn off this device to save power

  6. go to the tab Advanced

  7 find the WiFi Configuration option

  8 replace the value with WiFi

  9. click on OK

  10. wireless adapter is disabled and enabled

  11 restart the laptop

• HP Probook 450 G2: Impossible to use the HP Probook 450 G2 of fingerprints

  I bought a HP Probook 450 G2 with the free dos version yesterday. I installed windows pro 8.1 on it successfully with all the drivers of HP on the site. But apparently, HP drivers for my probook web page don't offer me with the software "simplepass" for the finger print function. So, I downloaded it from a third party Web page. I checked from the BIOS and the fingerprint is activated, I also installed the validity sensor driver and whatever it is I just don't get any option 'fingerprint' on the program (Simplepass), what they show is 'Pass pine or CHARACTER' and nothing else. Similarly, the option "SIGN IN" from the windows, they show no fingerprints for security options. All my drivers are up to date.  Validity sensor driver is 4.5.133.0, SimplePass is 2015. I'm starting to give up because I googled as much I could and tried all the safest approach, still does not work. Help someone?

  Thank you in advance.

  Please check in the Device Manager and make sure you see the fingerprint sensor fingerprint validity in BIOMETRICS , as shown in the image below

  

  If you find fingerprint sensor fingerprint validity in Device manager, please click the link below to download and install the full Suite

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827&swItemId=ob_138571_1&swEnvOid=4158#

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  GBL84

  Although I am an employee of HP, I speak for myself and not for HP

• HP ProBook 450 G0 - brands of spare wireless adapter

  Hello, community,

  I have a question about my options of parts wireless adapter for my laptop HP ProBook 450 G0.

  For now, the laptop that I have has

  root@Linux:~# lspci | grep 'network controller '.
  03:00.0 network controller: Ralink Corp. device 3290

  and I can't say that I am fully satisfied with the quality of the wifi adapter sensitivity I don't know if it's me being out of luck or it's normal and behaviour expected for this model, but the fact is that I have two options now - either buy an adapter external usb or replace the internal adapter by another.

  While the options for an external adapter ubs are quite clear, the spare parts for an internal card are not so. So basically here's the question: what are my options? I heard there are adapters, one made by atheros, broadcom and intel, but do not know if they are compatible with my particular laptop model. And if they are, what would the references.

  Thank you.

  Yes. HP lock the BIOS, and if you install something else very accurate wifi adapters the system will not DISPLAY. You are right in thinking the Ralink is not the best option. Your best bet is Atheros and Intel in that order. Broadcom cards are a bit difficult to configure with Linux, but it can be done. Here is the complete list of the wifi cards with part numbers that you can use:

  Intel Centrino Advanced-N 6235 670292-001

• HP probook 450 g2: hp simplepass does not

  I bought a brand new hp probook 450 g2 pc laptop last week.and than th pass simple version 6 nuts also, I installed his does not not the sensor I does not please hep to solve this problem

  @darshmorgan

  darshmorgan wrote:
  

  so why insert it a finger print sensor to these business notebooks.is there any option to enable that works because this note book only for personal use

  In response to your questions:

  • Laptops of professional quality are equipped with sensors of finger prints for the same reason that consumers rank models offer the feature - biometrics are a method very popular to connect to your computer without having to type a password.

  SimplePass software runs on quality consumer laptops.

  • Security of client software runs on the professional quality laptops.

  Both programs offer some of the same functions.

  

  Options

  Install and run the Client Security

  OR

  If you run Windows 10

  and

  If you only want / need to connect to the computer with your fingerprint

  then

  You can set a PIN code and then activate the fingerprint reader to log that ships with the operating system Windows 10

  Start / Windows key > settings > accounts > Sign-In Options > PIN

  Help:

  Add or remove fingerprints - 10 Windows logon

  OR

  If you do not want to install / use the Client Security software on your computer

  and

  you do not want to be able to connect to (most) sites without having to type a password,

  then

  You can buy a password management program

  If you want, you can combine security software and password into a single service manager.

  Example: Avast Prime Minister

  DISCLAIMER: I do not work for Avast nor do I have any personal affiliation or business with the company - I have used their products.

  

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.