ProBook 450 G0: 10 Windows will not sleep or Hibernate or start properly

Similar Questions

• Windows will not sleep with the attached USB

  I have two computers, a Windows 7 and XP, which have USB drives connected, and they are set to turn out to fall asleep after two hours of no activity but do not sleep when I am away. There was nothing running, no keyboard/mouse input. Is there a way to fix what is happening? Readers USB prevent sleep?

  Hello

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  Have you made any changes to your computer hardware or software?

  It seems that the power settings are not correct.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Disable the ability of the USB device to wake the computer and check. To do this, please follow these steps:

  a. Click Start, right-click computer and then click on 'manage '.

  b. in the user account control dialog box, click "continue".

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  c. click on Device Manager, expand USB, right click on the device bus controllers and then click

  Properties.

  d. click the "Power management" tab and clear the checkbox "Allow this device to wake the computer" and then click ok.

  If this does not help, then use method 2.

  Method 2:
  Please use the suggestions contained in this Microsoft support article and check the issue.
  Reference:
  Windows 7 is not going to sleep
  http://support.Microsoft.com/kb/976877

  Additional information:
  Sleep and extended: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions
   
   
  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Maintenance of Windows 8 and will not sleep

  My lenove h505s which is 3 months old has installed windows 8.  Everything has been fine up until about 2 weeks ago it started doing maintenance and this interview will not end.  This seems to be produced at the same time that the computer will not sleep.

  The screen turns off after 10 minutes, but the computer does not turn off and should be 25 minutes.

  I'm sure that the maintenance is now awake and even if you stop the interview, I don't know that because an interview is necessary, stop the sleep of PC.

  I'm afraid this is going to damage that the fan runs all the time when not in service.

  Any advice would be appreciated

  Thank you

  try to optimize the drive options not to defragment the hidden recovery disks (just uncheck the readers which has no drive letter)

  step 1: computer goto-> right click on drive c :-> click Properties

  Tools 2 step tab and in there click on optimize

  step 3 change the settings

  step 4: uncheck the readers who have no drive letter. (most laptops have these drives hidden for recovery and they are not visible in 'computer')

  Much appreciated for these tips!  This was exactly my problem!  Once I configured defrag in c: only automatic maintenance was back he is quick, quick auto...

• Why my TestStand deployment installation appear under my Windows will not start menu of my target machine?

  Why my TestStand deployment installation appear under my Windows will not start menu of my target machine?

  I managed to install the deployments of work to the target machines. However, I expected to see the classified facility "My TestStand system" in my Start menu, but it is not. Am I misunderstanding something here?

  Also, if I do another target second deployment to the station as "My TestStand system B", all LabVIEW files in my previous installation for "My system TestStand" disappear from the directory (c:\Program Files\My TestStand system) target.

  I use TestStand Professional 4.2.1 on Windows XP and LabVIEW 2009 development station.

  Thank you Paul,.

  That solved my second problem and inspired me to look deeper for the response to my first problem. The answer lies in the tab 'distributed file","Installer properties' box 'create a program item:

  

  Wouldn't be nice if it is automatically checked by default for main sequence files? Wouldn't also nice if "Upgrade Code" was regenerated automatically by default whenever we have saved the file *.tsd under another name?

  Thanks again,

  Eugene

• create dvd Windows will not import the mp4, how to get around it, someone knows?

  create dvd Windows will not import the mp4, how to get around it, someone knows?

  It must convert your mp4 to WMV format video, and then add the wmv in Windows DVD Maker.

  There are other formats supported by Windows, but I chose WMV format because it is the most reliable and foolproof format for Windows.

  You can google for a free video converter. No need to buy one, unless you are a 'huge' in the making of films and others.

  I use Prism video converter. It's free.

  I'm not fan of movie maker. Prism is what I need it to do.

  http://Prism-video-converter.en.softonic.com/

• Windows will not be updated vista, error code 8007010 error help 643.__please b!

  Windows will not update

  eddyboylip,
  If you are still having this problem then you might be able to do both of the following:

  Disk error checking

  System File Checker

  If the System File Checker corrects some problems then try the updates again. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• USB MTP device drivers will not properly install for Samsung Galaxy S3 - Windows will not synchronize Galaxy S3 for computer

  Windows will not synchronize Galaxy S3 synchronizes a mobile computer.  When I attach USB cable the computer flashes added new hardware, but when you click the icon it goes in loops.  I've uninstalled and reinstalled the drivers in Kies and always the same problem.  All other cell phones synced to computer, including the Samsung Galaxy S3 but my iPhone no matter what I do.  When I open Kies and connect the USB cable there is no reconition of the cell phone.  I've seen a Code 31 error appear in good devices.
  Add questionnaires of the Add Hardware Wizard...

  SAMSUNG Mobile MTP Device (a yellow excamation sign)
               
  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  SAMSUNG Android ADB Interface

  This device does not work correctly

  SAMSUNG Mobile USB Modem

  This device does not work correctly.

  SAMSUNG Mobile USB Composite Device DeviceThis works correctly.

  This device does not work correctly.

  It is all the information I can give at the moment.  I forgot to mention I am running Windows XP I hope that helps also.  With everything says I don't understand why will not load the drivers required for this device.  For any help or suggestion will be greatly appreciated.  Thank you all

  Hello

  -What is the driver version you are using?

  The latest version is ver.v1.4.6.0 out June 19, 2012.

  I recommend you to please update the USB drivers on your computer and check if it helps.

  How to manage devices in Windows XP
  http://support.Microsoft.com/kb/283658

  If this does not help, I would recommend you to please contact Samsung support for assistance.
  http://www.Samsung.com/us/support/

  There is a community forum for Samsung where you can ask questions.
  http://www.Samsung.com/us/support/owners/product/Sch-I535MBCVZW

  Hope this information helps.

• When I shut down windows end progra - sample appears and windows will not be stopped, unless I click for end of program. Eny one have an idea how to stop this program from running?

  When I shut down windows end progra - sample appears and windows will not be stopped, unless I click for end of program. Eny one have an idea how to stop this program from running?

  Then, you will need to request Support Intel if the drivers you downloaded were appropriate for your hardware and Windows XP.

• Windows will not update - "the location where updates WIndows stores the data changed.... »

  original title: windows will not update - please help

  I get the message "where Windows Update stores data has changed and should be repaired" How can I change this so that I can update my computer?

  How to reset the Windows Updates components?

  http://support.Microsoft.com/kb/971058>

  Download and Save the fix it 50202 from the page above.

  Close all the open browsers and programs prior to execution of the fix it.

  Since the downloads fail, when run you the fix it choose its default mode when you run it the first time.

  When he finished, check if download updates now.

  If the updates are still not download after you run it, then run it again and choose his Aggressive mode.

  Then reboot and see if the download updates now.

  UTC/GMT is 19:07 Monday, December 26, 2011

• I have windows xp I deleted rundll32.exe now my windows will not work please help.

  I have windows xp. I some how deleted rundll32.exe now my windows will not work or open. system restore not working anymore.

  http://www.computing.NET/answers/Windows-XP/deleted-rundll32exe/168958.html

• Windows will not see my DVD/CD drive

  I have Windows Xp Professional SP3. Windows will not see my DVD +-RW which is internal drive, or my double-sided external DVD RW lightscribe. I tried the FixIt tool and the registry hack. They can work at the same time, but whenever I try to use the car, they both disappear again. Anyone have any new ideas?

  Hello

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  ·        What registry hack you speak and what patch did you use?

  Method 1:

  I suggest you try the steps mentioned in the articles below and let us know your progress.

  Drive CD - R or CD - RW Drive is not recognized as a recordable device

  http://support.Microsoft.com/kb/316529

  Advanced Troubleshooting for issues that occur when you are installing a new CD or DVD drive in Windows XP

  http://support.Microsoft.com/kb/314096

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Method 2:

  I suggest to update the firmware of the CD/DVD drive on the system and check if the problem persists.

  Method 3:

  In addition, run the fix that is present in the link mentioned below.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Windows will not read the disc media

  For some reason, windows will not read dvd or cd or the floppy one and the flash drives or cards of the camera with a usb drive. What would cause this and how then I get back to work? All media works on the other pc.

  Always connect these devices to drive/USB card edge USB connection (for desktop Front panel USB ports); never use a connector of the control panel back or USB hubs.

  Read the page and manually or just download & run fixit MS; It just automatically all the steps

  http://support.Microsoft.com/kb/817900

  With regard to the FDD. I'll say change the player as FDD get very often defective & now a days it is difficult to get a new one. For the majority of them are now short lived to over-exploitation.

  Remember to answer.

  S.Chatterjee

• Windows will not work stopped... it crashes with just a mouse pointer and the blue screen.

  Windows will not be stopped.  Laptop crashes with blue screen and a mouse pointer.  This laptop has XP Professional SP3.

  Look in the event log to see if any errors are recorded.  Install the Service Profile Hive Cleanup (UPHClean) Microsoft and see if things improve.  See here for more information:

  You experience disconnection problems on a computer based on Windows XP, Windows Server 2003 - based, Windows 2000 or Windows NT 4.0-based:

  http://support.Microsoft.com/kb/837115

  John

• Windows will not play. MOV files

  After downloading a. Video MOV, windows will not play it. A message appears that says required codec was not found. In the Media Player options, the box is checked download codecs. Why Windows media player does not download it. MOV codecs?

  After downloading a. Video MOV, windows will not play it. A message appears that says required codec was not found. In the Media Player options, the box is checked download codecs. Why Windows media player does not download it. MOV codecs?

  =========================================
  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  The 3ivx codec is supposed to enable WMP play
  Apple QuickTime .mov files...

  codec 3ivx
  http://www.free-codecs.com/download/3ivx.htm

  Also... the following freeware players can play QuickTime .mov files.

  Apple QuickTime
  http://www.Apple.com/QuickTime/Download/

  QuickTime Alternative
  http://www.codecpackguide.com/quicktimealt.htm

  VLC Media Player
  http://www.videolan.org/

   
  Media Player Classic
  http://www.filehippo.com/download_media_player_classic/
  (just unzip and run it... (no installation required)

  Media Player Classic Home Cinema
  http://MPC-HC.sourceforge.NET/

  If you want to install a pack of codecs... one of the following
  may be worth a try:

  * Proceed at your own risk *.

  K - Lite Codec Pack (full)
  http://www.filehippo.com/download_klite_codec_pack/
  FWIW... it is always preferable, if you create a system restore
  point before installing any software or updates.

  CCCP (combined Community Codec Pack)
  http://CCCP-project.NET/

  Info about CCCP
  http://www.CCCP-project.NET/wiki/index.php?title=Main_Page
  (FWIW... it is always preferable, if you create a system restore
  point before installing any software or updates)

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Mail window will not receive ATT email error 0X800CCC90, 0X800CCC0F and 0X800420CD.

  Original title: Mail window will not receive any emails ATT

  After you have not used my Windows Mail to receive my emails on my Dell computer that uses Vista Ultimate for two weeks, now I am unable to receive emails from my ATT yahoo email account.  Whenever I try to receive I get #14864 and 14865 with error 0X800CCC90, 0X800CCC0F and 0X800420CD messages.  Will you please tell me how to solve this problem, so I can use my Windows Mail.  I have no problem sending and my account is set to pop.att.yahoo.com.

  Hello

  Have you done any software or changes to the material on the computer before this problem?

  You can check these links.

  Solve problems with Windows Mail

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  Refer to the steps from the link that resolves a similar problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/cannot-send-or-receive-emails-in-Windows-Mail/3306783c-7a07-4cea-86d0-ad750723a027

  For reference:

  http://support.Microsoft.com/kb/942495

  Check if it helps.