ProBook 4530 s do not Fine DVD... This is life showig blank disc

Similar Questions

• HP probook 4530 s will not work with the battery installed with the battery installed.

  When the battery is in my hp probook 4530 s he will not come, but when I take the battery from the computer works fine.  I need to know what can cause that I got a hp replacement battery it works for about 30-45 minutes and then it does the same thing again.  Can someone tell me what is happening with my computer is 2 bad batteries or what?

  Hey ctbookkeeping,

  I would say that your laptop is going to need a maintenance. It is a symptom of the failure of the AC/DC converter Board. You can contact technical support at the 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

  Take care

  Sean

• Driver HP probook 4530 s wireless not exist and does not appear in Device Manager

  Hi guys,.

  I have hp probook 4530 s I also have the original cd recovery (OP - drivers)

  After I installed new windows and install all the drivers, I don't think Bluetooth, wireless drivers, also both appear in the connection manager is two steps still exist in the Device Manager.

  is it possible to make it work.

  Thank you

  Hello, try to hard rest your laptop (remove the battery and ac adapter and pressed the power button 20 sec, simply plug in the power adapter and you start a laptop computer), and then press F10 to access the bios and 'restore the default value' and "save changes and exit" ===> ok else try to install Hp softpaq Download Manager (it will check alls missed drivers and their installation) : http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5060880&prodNameId=5060882&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-105327-1 And if the same issue, try to check the wireless antenna cables or test with another wlan mini card of the same model (you find the link bellow who remove and replace this part) : http://h20464.www2.hp.com/results.htm?SID=5060880&MEID=C2E018CF-081B-479F-A6A0-DCE8406A2623 Best Regards, Wajdi Engineer HP GS1 and CE Team

• Get my DVD player to recognize a blank disc

  I tried several brands of dvd media blank, I uninstall-ed then reinstalled different software.it reads disks with info about this it won't read a blank disc! What to do next? Help

  Hello

  • If there's an error message displayed when blank DVD is inserted?

  Try to remove the upper and lower filters and check if the problem persists. To do this, follow these steps:

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: (http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry ) how to back up and restore the registry in Windows)

  i. Click Start, type regedit in the search box and then click regedit in the list programs. If you are prompted for an administrator password or a confirmation, type your password, or click on continue.

  II. looking out for and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Warning: There may be many instances of the registry subkey that is mentioned in step 2. You must ensure that you are in the appropriate registry subkey before modifying the UpperFilters and LowerFilters values. To verify that you are in the appropriate registry subkey, make sure that the default data value is the CD-ROM/DVD-ROM and the class data value is CDROM.

  III. in the right pane, click UpperFilters, and then click on remove.

  IV. click Yes to confirm the deletion of the UpperFilters registry entry.

  v. in the right pane, click LowerFilters, and then click on remove.

  VI. click Yes to confirm the deletion of the LowerFilters registry entry.

  VII. exit Registry Editor, and then restart the computer.

  Note:  After the removal of the UpperFilters registry entry and the LowerFilters registry entry, you may lose functionality in certain programs such as CD recording programs. In this scenario, you must reinstall all of the programs involved. If the problem persists, contact the program vendor to determine if an update is available for the program.

  Also, check out the following links:

  • Your CD or DVD drive is missing or is not recognized by Windows or other programs: http://support.microsoft.com/kb/314060
  • Drive CD - R or CD - RW Drive is not recognized as a recordable device: http://support.microsoft.com/kb/316529/
  • When you insert a CD or a DVD, Windows Vista may not recognize the disc: http://support.microsoft.com/kb/939052
  • Your CD or DVD drive cannot read or write media - A Mr Fixit: http://support.microsoft.com/gp/cd_dvd_drive_problems

  Diana
  Microsoft Answers Support Engineer

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• It is not possible to burn music on a blank disc to my Media Player library.

  Help, please. RIP ALL my CD s, to the computer as a backup incase I scratch or ruin CD and also for listening to music on my computer when he is away from camping etc.

  Now, I'm for some reason unable to burn my CD to a disc to use in my car, etc..  I use correct audio blank discs and burning will start but after a track, or so, all of a sudden he finalizes the disc and continues to burn!  I went well so maybe blank discs trying to get out.  Thanks for all the ideas here. I appreciate it.

  I use a computer toshiba laptop. Windows Vista business and keep my computer up-to-date.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  I thank very you much for your response and links.  YES, I did as you suggested and it was a positive result. I am very happy.  THANKS again for your support and advice and I hope that you have a Christmas happy and safe and all "out there". 5 medal note permanently.

• ProBook 4530 s: probook 4530 s does not turn on

  HIE

  I have a 4530 probook s and now its refuses to turn on after I had closed the lid to take care of something.

  Every time I try to turn it on the screen does not display anything, but the light that indicates that the laptop

  recharges will be continually turning white and orange. When I opened the rear just take a look, I

  seen as a very thin soft wire pointing to the top of the fan. Please help me if you have information on how to solve this problem

  because I was doing my research I wanted next week Monday.

  Concerning

  Wonderful collyns

  According to the message that you have recently published, I want to confirm that this could be a hardware problem and I highly recommend you Contact HP support by phone to get help to get your Notebook diagnosed and repaired by an authorized HP Certified Engineer

  You can also check your warranty here to check the status of the guarantee

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP

• HP Probook 4530 s A7K05UT not stickers

  Hello

  I bought this Probook s 4530 in August of TigerDirect. I recently decided to do my upgrade at low prices to Windows 8 and noticed that I have no Windows 7 product key sticker or the thumbnail S/N on the bottom of my laptop. Is - this common as these laptops? The product key sticker is on something else?

  Thank you, Joe

  Hello

  Because of the bad design/material, stickers out very quickly that's why many providers now put the sticker inside the battery area. Please, remove the battery and check from there.

  I hope this helps.

• HP probook 4530 s does not turn on

  Hello

  My probook parents has had a good run, and recently I added 8 GB of ram and a 250 GB SDS because they were coplaining about it being slow.

  I turned it on this evening and the screen went funny and scrambled, then frozen. I restarted in safe mode, and it froze again.

  I then restarted again and but this time the laptop does not start, the button flashes then dies.

  I unplugged my ac, took out the battery, based on the power button for 2 minutes and replugged the AC, but it did not work.

  Can you help me please?

  Thank you very much

  Hello @aw249 ,

  Thanks for posting on the HP Forums!

  I understand that you have a problem with your laptop. However, since it is a commercial laptop, you should post your question on the map cell of the HP Enterprise Forums for a better answer.

  Have a wonderful day!

  Mario

• HP probook 4530 s - face recognition does not. How can I delete information provided for this

  How can I delete information of face recognition with which I have provided my HP Probook 4530 s when I started the unit? I do not use the software because it does not work when I try to use it and prefer the fingerprint reader.

  Hello

  Uninstall the system of "facial recognition for HP ProtectTools.

  This will remove the data (you may be asked to confirm this choice).

  Resources:
  Uninstall software in Windows 7

  Uninstall or change a program in Windows 7

  There may be second solution (I am not able to check it out).

  Open the HP ProtectTools Security Manager. Look there for the recognition of face on the list.
  Check all the options of this software. There also may be an option to remove this information.

  If you want to check the latest version of this software, then you can download it from here.

• HP Probook 4530 s fingerprint reader does not.

  I just bought HP Probook 4530 s Ci5

  6 GB of RAM

  740 GB hard

  1 Gb Radeon graphics card

  Win7 64 bit operating system

  I downloaded the driver and digital persona software from the HP Web site, my system Device Manager shows that the driver is correctly installed (called devices biometric, and under it Validity sensor, its listed version is VFS471). But on windows log on that is showing and then Player Detection is not detected. Same thing is happening in the software (digital persona). I tried different software in different websites.  Please indicate if you know something NEW. I said something new because I saw many people on many sites looking for this problem. But the problem is there.

  When I run the validity sensor driver installation, it will install fine.

  Then I run the last digital persona software it says on his system ("the system cannot check that the fingerprint readers is installed"). And that this is an option to SKIP this part. When I do, it completed the installation and restart the computer. After that the same problem "drive not detected" on windows to connect.

  Hello

  Uninstall the driver and the software for reader fingerpint.

  Resources:
  Uninstall software in Windows 7

  Uninstall or change a program in Windows 7

  Download and install the driver prints digital validity here.
  Download and install HP ProtectTools Security Manager here (inside this package, it is a software for fingerprint reader).

  Restart the system and check the results.

• The satellite A65-S1063 DVD drive does not work with this type of disc

  Hello world
  have a strange problem - my combo does not read dvd - r of a box. Everything is ok, when I put a disk anywhere else, but in this particular area or empty or written are recognized, it crashes just after trying to read and the lamp burning. The most funny thing is that when I check the discs on other computers, everything is fine with them. Any ideas?

  Hello

  For me it s case. You have updated firmware and this kind of DVD is not listed in the list of firmware. As Stefan has suggested, try a different brand of DVD.

• HP Probook 4530 s: Error Message 'wireless module not supported 702.

  I have a HP Probook 4530 s standard stock I had since then and all of a sudden in the last month it comes up with this error at startup "this wireless module is not supported then was disabled 702. I have not changed a thing since I've owned this laptop so I use the card wireless that put HP. I can occcasionally work around (reboot several times) but it is very frustrating, especially when I want to get something done quickly and I have to plan restarting, disconnect the battery etc. game. Is there a solution? I was looking for a solution. As I understand it there is an error with the BIOS and the wireless card is not on the whitelist. Which is ridiculous because it is what came with the laptop!

  Any ideas or suggestions?

  There is a update the BIOS of your system as dated March 2015 [F.60 Rev.A]

  Although it does not specifically address your problem, it may be useful and HP 'recommend' the update.

• What about the USB 3.0? HP ProBook 4530 s this product to have a USB 3.0 port?

  What about the USB 3.0?
  HP ProBook 4530 s
  Serial number: {removed privacy}

  OS Windows 7 Home premium (Original)

  This product do actually have USB 3.0 port? If so, how do I install drivers for that?

  In the specifications of this model, I can see that there is a USB 3.0 port.
  All 4 usb ports work correctly but I don't see anything like USB 3.0 in Bus USB controllers in Device Manager, I tried to install "ftp://ftp.hp.com/pub/softpaq/sp53501-54000/sp53671.exe" from the drivers for my product download page. It doesn't change anything in the device but installed a Manager application called "USB 3.0 Host Control Utility" when I opened, it displays a "warning!" Dialog box saying "not found USB 3.0 host controller '.

  Why is this?

  This product do actually have USB 3.0 port? If so, how do I install drivers for that?

  Yes, it is possible that she has a PIN 9 without support 3.0.

  Like I said before, all the usb 3.0 ports that I saw and work at speeds 3.0 have a blue plastic insert.

  

• ProBook 4530 s: Windows will not start with bad secondary hdd

  HP Probook 4530 s

  Windows 10 64 - bit

  Hi all

  I have my windows installed on a Samsung 840 Series SSD 120 GB and a WD 320 HDD as secondary drive in a basket in the dvd disc space. The two worked very well.

  I got 301 MB of unallocated HARD disk space and the rest as a partition.  I used MiniTool Partition Wizard 9 wish that one partition with all the space unallocated. After the changes have taken effect, it showed the hard drive as a 'bad disk '. I thought that I should restart windows to solve this problem. After that restart the laptop is stuck on the start screen that you can access the BIOS, the caps lock light flashes 5 times several times and then stops. The hard drive seems to be on and I can't access BIOS.

  When I remove the disk hard windows starts very well.

  I solved it myself.

  Set quick start.

  then the drive gives a letter.

• Could not open the page (drivers Probook 4530 s)

  I don't know if I'm posting this int the right section, but it's extremely annoying.

  I can't access the Probook 4530 s support with the drivers page, it gives me this message:

  Could not open page

  The service or the information requested is not available at this time.
  Please try again later.

  (Error: system-applsrv_unavail)

  Is there another way I can get my drivers?

  I left HP knows that there is a problem with all the portals of mobile support company.