ProBook 6470b | SSD is not on the F9 boot menu (SanDisk Ext. 128 GB SDSSDX - 120G - G25)

Similar Questions

• HP ENVY Ultrabook 6-1106tx: problem is 30 GB SSD do not show the Windows 8.1.

  Problem is 30 GB SSD do not show the Windows 8.1.

  If you speak the 32 GB mSATA SSD, it is a space/drive dedicated for the quick start of Windows.

  You can see this drive by launching the application "Intel Rapid Storage Technology" and the status tab.

  This might be useful:

  http://h10032.www1.HP.com/CTG/manual/c03590555

• Dual Boot with windows XP Pro with 2 HARD drive, error on secondary windows install: "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check boot path and disk hardware... »

  Hi, I recently bought a new Hitachi 1 TB internal hard drive. I wanted to do a clean install on the new drive (d), be able to dual boot my computer and leave my old 300 GB disk (C :) as the primary windows installation. After physically installing the new HARD drive, I noticed that "new hardware found" and the the brand name flashed in the bottom right corner. I thought I'd see the new hard drive in my computer, but I did not. I initialized the new HARD drive with the computer management window (right click on my computer - manage) and I also formatted in NTFS (I had to change my printer hard drive letter to assign the new HARD drive with the letter D, but I've made other changes after this step). Now, I could see and use in my main windows on the C: installation. I then installed a windows new copy XP pro with the installation CD I got for my C: but on the D: (Note: I have a Dell computer (and the Dell reinstallation CD) and my current version of windows has SP3 while the installation CD is only SP2) (I also reformatted my HARD drive during the installation of windows to NTFS)

  Now when I try to start on installing the new on my D: I get "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check startup disk and hardware access path. "and another line saying to refer to manuals HARD drive and windows.

  My Boot.ini file at this time was:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (0) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I looked towards the top of this help page, but for now I'm unlucky:

  http://support.Microsoft.com/kb/314477

  (The next steps I took by throwing from the Windows CD and go into the repair console)

  I tried to use the bootcfg /rebuild but the line to boot.ini for my secondary HARD drive still does not work.

  He gave me something like:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (1) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I also tried to change the signature() to multi (0), but it did not work. (or try almost all possible permutations of disk() and rdisk() partition() 0 to 2).

  I also tried to use expand F(dvd-drive):\i386\ntkrnlmp(I_have_a_duo-core).ex_ D:\windows\system32\ntoskrnl.exe and a few other combinations, but I when I login as D:\windows simply, it fails to extend with a message like "could not develop" or C:\windows I get "restricted access".

  I have not yet tried CHKDSK/r, but since I did a clean install on a newly formatted drive... I don't think it would work.

  I've also marked the partition on the D: as active (in computer management), but it did not help me.

  I've done a first installation of windows repair, strangely, I couldn't fix this one... Still does not work...

  My default windows installation yet works very well & I see that windows has been installed on the D: but I'm ideas from how to operate the dual-boot, can someone throw me a BONE on what to do?

  Maybe try to do something with the Boot Manager (whatever it is?) Create a new partition and use it as a boot manager? I don't really want to do this, because if I made a mistake I will be unable to use my computer and dual boot should work without going through all this trouble... But I found this page: http://technet.microsoft.com/fr-fr/library/ee829686%28WS.10%29.aspx

  Could a clean install two HDD help? I hope I won't have to do...

  Someone has an idea?

  PS: I'm not such an advanced user so I need a solution step by step, thanks!

  Edit: I also noted that I can't see my new HARD drive in my BIOS... weird... SATA-0 is my old drive HARD 1 and 2 are my dvd 3-5 readers are 'off' and it doesn't seem to be anything that it is plugged in. I also have 4 bays for internal HARD disks. Now, 2 are busy.

  Edit2: I looked inside my case and enabled the good Sata in the Bios after a reboot it detected the drive correctly. Dual boot doesn't always work well... The fact that it was disable in the BIOS while I was installing the new HARD drive could change anything? Hmm...

  In case I wasn't clear enough: I had a windows XP Pro installed on my C:, bought a new hard drive and installed the same copy of windows on it (d). I think that should allow me to double boot between the two installs different. Even if for some reason I can't boot from one on my D:. Andrew, I do not understand why you so far physically disconnect the other drive, the point of the whole operation is to build a boot.ini file so that the BIOS knows that it y facilities 2 windows and you allow to choose (and not have conflicting problems between the 2 systems), someone correct me if I'm wrong? "Expand" the part of my first post made reference to one of the solutions provided by Microsoft in the first link that I have included in my previous post (but I can't seem to work).

  In addition, it is the procedure that I followed: http://www.ehow.com/how_5950826_boot-two-different-hard-drives.html

  (except I've had the first installation already done).

  Andrew "also, once a new hd is plugged on the pc & running, most of the BIOS will place (them) as 1st priority hd, set the BIOS to do this", you mean that by installing separately from windows on each unit when the other is not plugged in, I could choose what disk to start from defining their priority in the BIOS once they are all plugged back? It's too tedious (as I intend to move frequently between the 2 installs) and requires a computer to other users of the lack of computer knowledge. Unfortunately, it is not a viable option.

  EDIT: I DID IT! Hmmm... Well, I double checked in the recovery console, the path of the new HARD drive with the arc command Scan. Tried to start again with the MULTI (0) in my boot.ini and it worked... I also had my windows install CD in. Maybe that is why I could not start, windows needs the CD to complete the installation? Weird, I don't know what I did to the difficulty it... but hey, it works! Thanks for your ideas guys!

• Satellite Pro M70-220 - how to start the Advanced Boot Menu

  Which key have to press on my Satellite Pro M70 - 220 starting Win XP, in order to enter the "Advanced Start Menu" - in other words, the menu that gives various boot options, such as safe, last good start Congiguration, start Windows Normal Mode, etc. ?

  On my old laptop Satellite 5105 - S702, it was the F8 key, but by pressing the F8 key on my M70 Pro does not bring up the 'Start Advanced Menu".

  The Advanced Start Menu came on its own a few days previously after an abnormal stop, so it seems that it does not exist on the M70 Pro.

  Thanks for any advice anyone has to offer.

  AlanCB

  Hello

  The Advanced Boot Menu can be reached by pressing the F8 key.
  It s a Windows menu basic and it s any laptop it is.
  It should work on all computers.

  Maybe you can not activate the Start Menu advanced because the Windows operating system is confused upward.

• Case of backup not appearing is not in the System Tools menu

  I tried to help a friend to do a backup to a hard drive external and discovered there is no option to do so through the System Tools menu. I have WinXP pro and know that the Briefcase is in my menu, but not on hers. Is it possible to install or turn on the backup file to make it appear in the menu?

  Simple.
  XP Home does not install NTBackup by default.  This article addresses the problem you are having...

  'How to install backup from the CD-ROM in Windows XP Home Edition'
    <>http://support.Microsoft.com/kb/302894 >

  HTH,
  JW

• Im just not getting the dual boot I want

  I have a dell that I installed a 2nd HD in 1720.

  I need to be able to boot either Vista or XP without that dreaded OS drive letter change.

  When I boot from vista... I get C: OS but when I boot XP I E: XP.

  A few applications that I have are not well written and require the explicit C.  So when I boot XP drive should list as C: and not E:

  I really need to keep each separated from each other, but be able to use the dual boot without having to tell the machine this disc to start off every time.

  Suggestions?

  http://www.syschat.com/dual-boot-Vista-XP-Vista-already-1946.html

  Above the way dual boot Vista and XP on separate hard disks, with Vista installed is 1.

  You have the choice whether you want to start Vista or XP.

  See you soon.

  Mick Murphy - Microsoft partner

• BlackBerry 8310 smartphones DOES NOT RECOGNIZE the CARD 8 GB SANDISK

  OK gang, not quite the same problem as everyone discussed.  I have a 8310 with ATT. on 4.2.2.170.  I just installed a Sandisk 8 Gb card that I bought and received yesterday.  I installed thinking it would immediately recognize 4 GB based on what I read in various expert comments and responses, but in the Media Manager, it seems not to recognize at all.  Cannot transfer images or files on him.  so, is that what I did something wrong?  My BB showed a message asking if I want to turn on the media card, and I answered YES.

  Any help would be appreciated, as always!  Thanks in advance!

  Do yu have a card reader for your PC that you can use to read the card?

  If this is not the case, go to MEDIA CARD MENU KEY FORMAT OPTIONS.

  If you have the possibility to use the PC.

  Make sure you have the following folders on the card:

  BlackBerry

  music

  photos

  ringtones

  vidieos

  VoiceNotes

  This is where the BB get the associated files.

  Let me know!

• Reinstall win7 on a HP 6730 s no CD drive in the F9 boot menu

  Hello I receive about 20 parts of the HP 6730 s of a school in the Netherlands, these laptops I have tro re instal for win7 IN. This is for one of our projects in Africa to Uganda.

  My problem is that I can't have the CD player in the start menu.

  Can someone help me to get the CD in the boot menu.

  Hi I did return to the default settings and the direct start with F9 ignore the security settings. that solved my problem.

  Also my CD Player did not work

• HP Elitebook 8560w: new SSD has NOT copied the partition HP_TOOLS... ?

  I have a complete clone of the drive C on the SSD. I don't have the HP_TOOLS partition and the hidden partition on the SSD recoverty.

  Do I need? How can I get them on the SSD?

  Thanks for any help you can provide.

  Nope. If it were, it would not work without them. Check and see if you can get into diagnostics UEFI tapping F2 you power up. I would check that. No need to run the computer, but you never miss it until you need it if you have a possible hardware problem. There is a program downloaded UEFI, you can install if necessary. There is no download Windows 10 but UEFI 8.1 Windows should work:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5071172&swItemId=ob_129420_1&swEnvOid=4158

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• ProBook 4720 s does not detect the SD card inserted

  I get no response when a SD card snaps, but 8 GB Transcend card is recognized very well of my little netbook from Toshiba.

  This is the first time I tried a card in this HP, although I got it a few months. Running Win 7 Pro 32-bit.  BIOS HP 68AZZ worm F.0F 18/02/2011.

  Well, I contacted HP support and got a helpful response within a day. Siva gave me urls for two drivers that I apparently needed (not very new drivers and I don't know why they were not there in this new machine, but any way..) and they installed, unlike the one I found just for me and giving a message "forbidden". However, once installed, both raised the box "this program cannot be installed correctly" (that I've seen before and never known what to do about it except devoted to work and hope for the best).

  With the drivers installed, the system * fact * detect the SD card so that it has shown in Device Manager and gave sound signals when it has been installed and removed. But he does not have assigned a drive letter and did not show in Windows Explorer, while it was still incommunicado or to serve as a ReadyBoost file storage.

  Thinking that it seemed that HP problems were over and it is now a Windows problem, I spent a few hours to make the seemingly useless things in Windows, all having to do with recovery of AutoRun, which is not.

  Now the SHIFT key while inserting the SD card could start AutoRun. Also, I gave the command 'net start shellhwdetection' and told me that the service was already running. And AutoFix.exe from Microsoft verified that the shell hardware detection service was on and the autostart value. But to step next, as the wizard repair didn't see that other readers, not the SD card, so I couldn't specify only * that * drive AutoPlay wasn't working on, and which ends the program.

  Support software MS said that if ReadyBoost enabled and there (and it was) and still does not work there because some services he needed had been extinguished. So I Dove to the various lists and tried to turn on anything that seemed relevant and which has not already lit.  Nothing seemed to still accept my changes. Very frustrating. But then I went back to where I had left access control panel in Explorer, and I saw that the SD card has sometime been recognized and awarded drive E. Shazam!

  Therefore, all followed the script and I could bring up the window of the tab (in the properties of the drive E) option for ReadyBoost and say, go ahead. He did, and it seems to work very well. It closes fast when I close the lid, with several major programs running, as well as 4 windows in FF with about 12-24 tablets of each, and it took only 60 seconds to wake up this morning.

  So the problem is solved with something good help at HP, but not gracefully or usefully for others, I'm afraid, because I can't say yet exactly what I did.

• Why the browser hijacker Vosteran is not in the drop-down menu search engine?

  New download of Firefox 33.1 has a pirate of known browser listed in the menu dropdown. It took me several hours to remove its harmful files and get any browser working properly again. This is crazy!

  Firefox is not built with a Vosteran search plugin, but if it is on your system in one of the folders to search plugins, then Firefox will add it to your list. Similarly, if Firefox detects and the module on your system, it will add it to the addons page. You can see a display of approval from time to time ask whether it should be enabled.

  It would be useful if you could check your history around the time that you have downloaded the latest update of Firefox to see what sites are listed in case there is a malicious download site that should be stopped.

• Netlogon does not not after the clean boot

  Hello

  I went into msconfig and disabled startup stuff and I forgot to hide microsoft applications - so now when I start the machine, it is said that it is not connected to the netlogon and won't let me go any further - is in any way I can reverse this order of back - I tried to restore to the previous, but the machine is not allowing me to give it some time - it's only allowing me to restore to factory setting - the other options are greyed out...

  Help, please!

  Thank you

  Nicolle

  Hi Nathan,

  ·         You receive an error message or error code?

  I suggest you to consult the article in the Microsoft Knowledge Base and check.

   

  Permitting registration of debugging for the Net Logon service

  http://support.Microsoft.com/kb/109626

  Let us know if that helps.

• Wireless Internet w/QuickStart, but not with the regular boot of Win7

  I have a Pavilion dv4-4141us.  With QuickStart/QuickWeb, the laptop has no trouble to connect to my wireless network and Internet usage.  But, when I do a normal in Win7 start, although the lapop connects to wireless normally, it does not provide a connection to the Internet.  If I connect to the router via Ethernet, then cable and wireless connections are good.

  I compared the security type, MAC address, IP address, etc. and can't find no difference between the regular starting values and a quick start.  Troubleshooting Win7 app isn't any help. He recommends that I reboot the router - I did many times without any effect on the problem at all.

  I use the same network wireless with an iPad without any problem, and I have no problem using the Ethernet connection to share files and printers between the laptop, an other PC Win7 and Ubuntu Linux a PC.

  Bottom line: my HP laptop does everything well except wireless Internet (except in quick start mode).

  Hello:

  There the Broadcom 4313 WLAN card you find the parts list for your model.

  See if updating the driver for this card help.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107849-1&cc=us&DLC=en&LC=en

• Not all the same States menu

  On the Organization , there is a menu for 'organization '.

  I still for the button States, the text itself has no distinct States, so it will not interfere with each other.

  But for the first two buttons "Schulleitung und Secretariat" and 'Aktuelles und ends' the 'ACTIVE' State does not show what I had put it.

  Any ideas?

  If you need the file Muse, ask for it.

  Thanks in advance

  Uwe

  OK, I see now. Perhaps, I was too mesmerized by the scroll...

  But he really needs to be something with the States, you want to bet?

  You can send me your Muse , if you want: [email protected]

• Impossible to access the advanced boot menu

  Original title : Safe mode for access to the

  When I start my laptop it goes right into the Boot Device menu. How to do in safe mode? By pressing F8 does nothing. I use windows XP

  Hello barber147,

  What is happening on the machine is that you have to start safe mode?

  Sometimes we don't see the prompt for F8 to access the start menu.

  Often find it me easier to continually press F8 during the boot process

  Let us know.

  Best regards

  Matthew_Ha