ProBook 6550 b: it will work CPU in my system

Similar Questions

• A power of 1000w Dell Precision 690 United States will work in the British system

  I want to order a replacement power and found a Dell Precision 690 1000W ND285 power in the United States, I know that this system works this power but wanted to know if I ordered it from the United States to be shipped to the United Kingdom (England) it will work here or is there a voltage difference that will blow/effect it?

  The reason why I ask this is that I repair my friends Precision 690 power because it starts not as it should be because it has the dreaded 1-3 and power button flashing continuously orange. I usually get it going again for him leaving on the supply cable of the day after / for a few hours, but the problem comes back finally after some closures, so not a solution.

  His system has 32 GB of RAM, a processor my171 mother board 2 Xeon QuadCore 5355, a Nvidia Quadro 4800 graphics card and 4 SATA drives and 2 DVD r/w drives all sitting in the appropriate ports.  I tested it on and all the way to no disk no ram, but even in this case the problem may occur intermittently.  I don't know that his power relatively maybe even a little somewhere? but I've looked and looked and left with the feeling that his power.

  but the only one I can find that is affordable is to the United States, the price they want to pay in Germany, I could buy a car for.

  American food will work in my UK machine?

  Thank you.

  Hugh

  (Just note that happened in (general Hardware, Audio, video) I hope this is the right category, if not my apologies.)

  hughhill

  Yes, it should

  Input 100-120 v or 200-240 v, output: 1000w Max, reference number: ND285

  Model number: N1000P-00, Ref number: NPS-1000AB a Rev: 06

  For Precision 690 microtower systems

  Connectors:

  1 x 24 - Pin ATX power connector Standard ATX Standard 1 x 20-pin power connector, power supply ATX Standard 1 x 12 pin connector, ATX Standard 1 x 8-pin power connector, 2 x PCI-Express, 4 x Mini 2 power connectors pin power connectors, adapter 1 x 6 - Pin power connector.

  Before using the power supply, check that the voltage is set at 240v. There should be a red toggle on the power switch, to set the voltage, if there is no switch, then the power supply is auto switching.

• ProBook 6550 b: same prob

  Hello
  Long story short, my laptop somehow lost sound in the speakers, but the headphones were ok.
  I tried all these tips forums (including the loosening of a sensor with a toothpick, since the phonejack)

  next tips, I uninstalled IDT of Device Manager to attempt to reinstall

  lost all its input and output, my ' n Audio Sounds Properties "say I have nothing installed.
  and Chrome subsequently also... just no sound anywhere
  and I can't find any internet "free" download/install

  what the hell have I done?
  P L E A S E... H e l p

  @Vlad888

  Welcome to the HP Community Forum - we are a community of fans of HP !

  Resettlement of in Device Manager doesn't work if the required driver is a place where the Manager to locate it.

  System:

  Laptop HP ProBook 6550 b

  Until you make changes > create a Restore Point: XP system restore

  Confirm / correct your operating system > open the Audio Section >

  Download and save the driver to your computer

  Close all your other programs, browsers

  Open the folder in which you saved the pilot (downloads or similar) >

  Double-click the installation package to install the driver

  In most cases, it is best to restart the computer after installing drivers / software (even if it is not "necessary" to do so).

  Comment

  XP is no longer supported, I suggest that you download the drivers of your computer and keep saved somewhere safe.  Do the same with your User Guides and anything else of interest that you will find in the support pages for the Web site of your computer.

  Why?  Because when it disappears, the information will not return.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• HP ProBook 6550 portable PC b: Re: RAM laptop HP ProBook 6550 b Upgrade issues.

  Info on my ProBook 6550 b HP PC:

  Intel Celeron P4600 @ 2.00GHz CPU 2.00 GHz

  2 x 1 GB RAM (1.86 GB usable)

  System type: 64 - bit operating system.

  Windows Pro 10.

  Query: I bought 2 x 4 GB RAM DDR3 1333 MHz 204-pin SODIMM Unbuffered of CCL Computers Ltd. After searching for the correct specifications on here to upgrade my RAM.

  I installed this new RAM carefully and booted up my laptop, only to be greeted by a blank screen / black.  I have re-installed the new RAM and rebooted my laptop, leading to the same result.

  I contacted CCL Computers Ltd, who recommended that I return the RAM to them for testing. However, they also mentioned that I should contact the constructor (HP) and ask them - your "QVL" (list of qualified suppliers) for successfully piloted ~ known RAM.

  So, with the above in mind, can you recommend a tested / experienced 4 GB of RAM running on my laptop, please?

  Already mentioned somewhere on one of these forum pages for "Corsair DDR3 4 GB of RAM of the laptop (CMSO4GX3M1A1600C11)"

  I'm also upgrading my laptop to SSD HARD drive.  I visited your forum pages and read that an SSD with a capacity of 250 GB is the optimum size.  Can anyone offer any known SSD fact / correctly upgraded for a laptop of my setup, please?   (See the top of this message to my HP ProBook specifications.)

  Looked at your comments and recommendations will be highly appreciated.

  Thanks a lot waiting for your answer.

  Hello:

  Please see this post below... Read the full thread.

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/memory-upgrade-6550b/m-p/5340551#M207994

• ProBook 6550 b: windows device driver 7 (64)

  Hello

  Hard disk provided with the Probook 6550 b was a Hatachi drive.this car 320gbytes has been completely corrupted and I bought a Hatachi HTS727550A9E64 and is located at 500Gbytes. I have inserted new disk and started the new installation of Windows 7 (64) and that it collects information it cannot find the driver for the hard disk. How/where can I get the drivers for this hard drive.your answer would be appreciated.

  Thank you

  ZAF

  You are the very welcome.

  Yes, everyone has had problems logging into the forum.

  Bad Gateway error.  In my view, that it took me 6 times until I'm finally in this AM.

  Forum administrators are aware of the problem and are trying to find a way to solve the problem.

  I'm glad you have the new drive to work.

  That's why usually, I format the drive with an installation disk XP before installing W7, just to make sure it will work.

  It seems strange that the 6550 b seems to have this problem in all areas.  There are a few members of the forum who had the same problem, but the suggestion I provided has worked for one of them, so I was hoping that it would be too much work for you.

  See the maintenance manual (Chapter 4) for 6550 b below for the location of the memory module and the removal and replacement procedures.

  http://h20628.www2.HP.com/km-ext/kmcsdirect/emr_na-c03471180-1.PDF

  The main module is under the keyboard.  Easy to access.

• dv7t-6100cto: which improved processors will work in this notebook

  I'm getting a new computer in the near future or upgrade the one I have. I don't know which processor upgrade path has this computer. Here are the specs: Chipset HM65, taken G2 (rPGA988B), 165 m, I7-2720QM card mother HP.

  On the Intel websitethere are some of the sandy Bridge and some processors Ivy Bridge that will work with this chipset, but I don't know if HP has imposed a stricter paramiters on what will work the cpu on this forum. Any direction you know where I can get pertinant information.

  I appreciate this info. I am influenced to go ahead and make a new version of a desktop when the need arises, because they have more potential for a faster processor. I can wait the Skylake finally surface. have not found much info on it yet, just a lot of speculation so far, it seems. Thank you for your help.

• If the processor will work with computer

  I have the HP s5610f and I was wondering if the AMD Athlon X 2 280'll will work in my computer without modification? I'm trying to get the cpu faster than can handle my stock setup and it seems to be.

  Hello

  Upgrade processor specifications can be found here.

  This list of AMD processorsshould work with the exception of the 'B' models This list is on the official website of AMD.  The processor you have selected is not yet listed.

  Know what the return policy is before you buy anything.

• HP Probook 6550 b: Hp 6550 b graphics card

  Hello, I have a Hp Probook 6550 b , and I want to update my graphics so I can to upgrade this laptop graphic card and made this laptop support external graphics card? And if yes well want their name too.

  Concerning

  Rizwan Jamil

  RizwanJamill wrote:
  

  Hello, I have a Hp Probook 6550 b , and I want to update my graphics so I can to upgrade this laptop graphic card and made this laptop support external graphics card? And if yes well want their name too.

  Concerning

  Rizwan Jamil

  Looks like as just as it is the onboard video and if you want more graphics, you will need to change the Board of Directors to do so. And video ext won't do better. Also, that only comes in two video AMD and nothing more.

  ATI Mobility Radeon™ HD 4250 is highest, this Council is going to based on the service manual...

  http://h20628.www2.HP.com/km-ext/kmcsdirect/emr_na-c03471180-1.PDF

• AT3-600-UR33 Acer will work GoPro Studio 2.0 video editing software?

  I am considering the AT3-600-UR33, which is available on the emachinesredeem site. Can someone tell me if this PC will allow me to start the video editing software provided by GoPro for their cameras? The minimum requirements that they list on their website are CPU: Intel Core 2 Duo; Graphics card supporting OpenGL 1.2 or higher; 4 GB RAM or more; Internal drive hard disk 5400 RPM; Quick Time 7.6 or higher. Here is the website http://gopro.com/support/articles/what-are-the-minimum-system-requirements-for-gopro-studio

  Thank you for your help

  Hi LMinCT

  The Dual core Celeron is not as good as the chip Core 2 Duo - everything will be OK.

  In theory - the answer is "maybe", but this isn't the ideal machine for your software, unless you can find another sequel that will work with the Celeron to video editing.

  The machine will run slowly, while using, even stop if HD video processing, and that it provides will allow you to install it in the first place.

  The AT3-600-UR33 is not a bad machine, it's just for everyday use.

• HP Probook 6550 b: light control and slow start system - disorder framework HP does not...

  I have a Probook 6550 b (F.50 Bios) witn Win 7 x 32.

  And I have all the drivers. Shortcut keys, sound also function works perfect.

  

  but the brightness does not (((-aime toujours zéro (minimes)))

  

  But if we push up to maximum after restart brightness is up too - he remembers light level, but only after the restart.

  Also, I find that OECD HP HotKey Support for HP software framework.

  And if any function HotKey work-it means that this evil is somethings else.

  In Windows logs, I found that HP Software Framework begins until more than 29 seconds!

  

  And when Windows starts - all waiting hpqwmiex.

  

  I know this software box HP has bugs, and older version is better.

  But I tried all possible versions of HP Software Framework... - Windows is always long startup and brightness does not work.

  What's wrong?

  Someone has an idea?

  I'm completely reinstall OS - and everything works.

• HP PRoBook 6550 b: HP Officejet J4540 Probook 6550 b 64 bit Win 7 Pro SP1 install - cannot use the sw HP Solution Center

  J4540 installation for 64-bit installations disc installs with success - although the works and so don't scan using the program "Paint" of Windows.  But the HP "HP Solutions Center 's" interface software that allows you to use any print-fax-scan function does not work - it does not install correctly.  This means that I can't scan multi page documents in 1 doc pdf.

  I had a similar problem to install this printer on my Win 8 Pavilion Desktop and am good help on the forum.

  HP PRoBook 6550 b

  Prod # WZ303UT #ABA

  s/n [personal information]

  Windows 7 Pro 64-bit Service Pack 1

  I've installed, uninstalled and reinstalled several times from the disk.

  I downloaded the windows updates

  The Ofc 2007 SP3, I downloaded and installed, in case that this would contribute to

  I downloaded the full feature software and driver for this model and tried to install from it.

  With the full functionality & pilots came "Error of Installation HP - Windows 7.hta" and I followed him with attention for the installation of USB, including disabling my Avast antivirus for one hour on each attempt, disabling a normal startup in msconfig

  After all this sw "HP Solutions Center 's" told me that the installation did not finish, so I uninstalled and retried twice, once the uninstall with the uninstall feature in the exe ' full functionality so & Driver "and once with the program control panel uninstall Uninstall System.  Same result after these attempts "not completely installed.

  Can't believe a HP product on a HP product installation can be this darn difficult.

  Do you have any help?     NB.

  First of all, thank you again for further upward.   I really appreciate your time and efforts.  I successfully completed earlier and tested the installation.  Here is what happened.

  I'm supposed to go again very carefully through your instructions and began uninstalling.  But as I went through this process, I came across problems of functionality - I mean, I could not get either the Windows uninstall or download of sw/driver uninstall function - nothing would happen.

  Then I found (surprisingly) I own the original supplied with the notebook disks (I got this for my son as he was headed for duty in Afghanistan in early 2011).  I therefore decided to back up and reinstall Windows & apps.  But the DVD player would not read discs or discs, although Bishop device says it works correctly.  My son used a lot of music and movies and had trouble with it in Af.  So the original disks were not do me no good.  I tried to create a repair on my GoFlex drive disc, but it does not work I think because the file system is not NTSC (initials right?), but is the Master Boot Record (sounds like the FAT).

  I discovered THE system BIOS before startup offered a recovery option - I used that and today tried to install it on the system and voila!

  I really didn't want to go this route to recovery because I wanted to overcome obstacles and make it work as it should.  Stubborn.  But retirement is only 7-8 years of absence and I had not a lot of time - ha!

  Now, I need to get a replacement DVD + RW and this laptop should be back to the original form, and the battery takes no charge so I guess it expired.  Since he does not need it, I have a pc to use so my wife can play Solitaire on the Pavilion.

  Awesome support both by you and others in the forum.  I am very grateful that you are here and it helped me to overcome the problems.  I learned a little, installs windows and this laptop.  At first I had no idea if I did something wrong, had the wrong approach, or what.

  Thanks again - I cannot exactly call your work a solution, but I was at the point where the complete reinstallation was the thing to do.

  Burton N

• problem to get internet with SIM card on the probook 6550 b win7 pro 64-bit

  Hello.

  I'm trying to connect to the internet with a SIM card on my Probook 6550 b with win 7 Pro - 64 bit

  I tried an external USB (called Globesurfer icon) device that works on computers running XP, but I can't make it work on mine.

  I tried to put the SIM card directly into the location corresponding to the battery. Nothing happens when I start the computer, and there is only two options in the wizard wireless (WLAN and Bluetooth)

  I tried to download and install a file (called sp53068) on the HP support site which was supposed to install the drivers for internet cell phone. It is a DOS window, and he said a sentence. Then it just closes.
  I also tried to install all the application files that extracts of the sp53068 in c:\swsetup\SP53068, but they have the habit of work.

  Please help me with this problem. Right now this is my only option to connect to the internet from my laptop.

  In advance, thank you for any help.

  Hello. I just wanted to say that the "mystery" is solved. Simply the USB device doesn't work because it only supports cooperative systems up to Win7 32 bit and no further details. I have 64-bit, so it's a 'no-go '. Thanks for you time.

• Photoshop CS6. It will work on my computer?

  Hello. I would buy Photoshop CS6. It will work on my computer with no problems? I have Windows 7 Professional 64-bit Service Pack 1. Intel (R) Core (TM) i5 - 2410 M CPU @ 2.30 GHz 4 GB of RAM. Graphics - Radeon HD 6490M. (some time ago I bought Autocad LT 2012 and there are a few problems with the graphics, but after the upgrade to version LT 2013, everything is ok).

  Should work just fine. Just check out the PS forum for threads on AMD / ATI Catalyst compatibility. Noel Carboni can advise on specific issues. According to me, to recommend the use of 13.0, not the last 13.1...

  Mylenium

• Can you check that adobe Flash Professional CS6 will work on my Apple MacBook 13.3 inch 1.83 GHz - MA254L

  You can check the software (Adobe Flash Professional CS6) will work on my Apple MacBook 13.3 inch 1.83 GHz - MA254LL/A, A1181 (chart below)? I can't match the requirements of the plug.

  Adobe Flash Professional CS6 configuration required:

  • Intel multi-core processor
  • Mac OS X 10.6.8 or v10.7. Adobe Creative Suite 5, 5.5, and CS6 applications support Mac OS X Lion mountains (v10.8) when it is installed on Intel based predecesseurs.* *.
  • 2 GB of RAM (3 GB recommended)
  • 4 GB of disk space available for installation. additional space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
  • display 1024 x 768 (1280 x 800 recommended)
  • Java 1.6 runtime environment
  • DVD-ROM drive
  • QuickTime 7.6.6 software required for multimedia features
  • This software will not work without activation. Broadband Internet connection and registration are required for activation of the software, the validation of subscriptions and online access to services * the phone activation is not available.

  Apple MacBook 13.3 inch 1.83 GHz (MA254LL/A, A1181) specifications:

  • Processor: 1.83 GHz Intel Core Duo
  • CPU speed: 1.83 GHz
  • System Bus speed: 667 MHz
  • Cache memory: 2 MB
  • Hard drive sizes: 60 GB 5400 RPM Serial ATA2
  • Logicboard RAM: (built to non-removable memory)
  • Maximum memory: 2 GB
  • Storage media: 2 - SODIMM DDR2-667 PC2-5300 1.8V
  • Minimum RAM speed: n/a
  • Graphics card: Intel graphics processor Intel GMA 950 with 64 MB of memory DDR2 SDRAM shared with main memory
  • Connection of the screen: 13.3 inch (visible diagonal) glossy TFT widescreen resolution 1280 x 800
  • Hard drive bus type: (50Pin SCSI to SCSI rack) or (ATA-ATA/IDE)
  • Airport: Built-in 54 Mbps AirPort extreme Wi - Fi (802.11 g) 3
  • Bluetooth: Bluetooth integrated 2.0 + EDR (Enhanced Data Rate) module
  • Power required: (Watt Max)
  • USB Ports: Two USB 2.0 (up to 480 Mbps) ports
  • FireWire ports: A port FireWire 400 (8 watts)

  The specifications seems ok for me other than the processor that can run a little slow.

  You can download the trial version and see for yourself whether or not it works perfectly.

  Kind regards

  Ravi.

• I have macBook build 10K 549 and I want to upgrade to the new OS system available while one will work on my device

  I have macBook build 10K 549 and I want to upgrade to the new OS system available while one will work on my device

  It is impossible to tell from this information. Choose about this Mac from the Apple menu, click more information and search the model identifier.

  If it's MacBook1, 1, 10.6.8.

  If it is MacBook2, 1-MacBook4, 1, 10.7.5.

  If it's MacBook5, 1 or MacBook5, 2, 10.11.6.

  If it's MacBook6, 1 or greater, 10.12.

  (144865)