ProBook 6570b: screen brightness works do not, the unknown device on PCI

Similar Questions

• HP Deskjet 3054: Printer works but not the Scanner (device not found)

  Configuration: Windows 8 Lap Top with a HP Deskjet 3054 directly connected via USB

  Printer - it works

  Scanner - when you run the Application "Hp Scan and capture ' it comes back and says"device not found ".

  I tried - I ran 'HP print and scan doctor '.   Everything is OK except the "HP Scan".  He said that it was not able to find the HP Scan software on my computer.   When I went on HP customer support site to download it, I couldn't find it.  There is nothing that I could see which says "HP scanning software".   So this software HP Deskjet full functionality and drivers what I should download and install?

  BTW, the "HP Scan and Capture" application allows to work perfectly.  Not sure why it isn't now.

  Hello

  When changed the type of network to a USB connection? scanning HP and Capture app support network scanners, it does support a USB connected device:

  http://support.HP.com/us-en/document/c03478505

  In the HP Deskjet 3050 software select scan a Document or Photo and check if this can work...

  If the same persists, unplug the USB, uninstall the HP Deskjet 3050 basic software drivers from programs and features, then download and reinstall the most comprehensive software features again.

  If you prefer to continue to use the HP Scan application capture &, open the HP Deskjet 3050 software, click the utilities tab, click the printer installation software & and select Convert USB wireless to connect the printer to your network. then the Scan & Capture app should detect the scanner.

  Shlomi

• The screen brightness setting does not appear in the mobility Center

  original title: how is the screen brightness control does not appear in the center of mobility?

  In the past the mobility of my laptop Vistas Center contained a slider to set the brightness of the screen.  My computer screen is dark and I want to adapt it to a brighter screen.  How can I get my rear screen brightness adjustment?

  Hi bigwaterboy,

  1. you remember to make changes to the computer, after which the issue started?

  I suggest updating the graphics card driver on the computer and check if it helps:

  Updated a hardware driver that is not working properly

  Reference link:

  Using Windows Mobility Center

  I hope this helps.

• I have tossiba laptop when I try music on my laptop speaker works but not the headphones work even not pregnant

  I tossiba laptope when I try music on my laptop speaker works but not the headphones speakers not even extra work

  Hi rajuarman,

  -Headset works fine on other computers?

  -Have you installed the audio drivers on your computer?

  -Not the problem only occurs when trying to play music in Internet Explorer?

  Your question does contain all the required information necessary for us to help you. Please include more information to continue troubleshooting as a result.

  Please see How to ask questions and provide the information required to help others.

  In the meantime, check out these articles:

  Tips for solving common audio problems

  No sound in Windows

• I have a Toshiba Satellite A105-S361 and I get this message: Windows successfully loaded the device driver for this hardware, but does not the hardware device. (Code 41)

  I have a Toshiba Satellite A105-S361 and I get this message: Windows successfully loaded the device driver for this hardware, but does not the hardware device. (Code 41)

  Hello

  I suggest to refer to this link, scroll down to error code 41 and follow the steps and check if that helps:

  http://support.Microsoft.com/kb/310123

  It will be useful.

• Connect my phone: not found a driver for the unknown device

  USB port

  wanted to connect my phone to the computer, says "not found a driver for the unknown device" what to do?

  View your manufacturers of mobile phones and FAQ about the connection to win7 support

• Vista - usb ports are not recognized unknown device

  Vista - usb ports are not recognized unknown device. any usb device it appears unknown. all worked a few days hardly, but after that I connected my Kodak camera - which does not, now, nothing works. Any help would be appreciated.

  Hello

  Thank you for using the Microsoft Windows Vista Forums.

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  Try to connect USB devices to a different USB port and check if you are able to access.

  Method 2:

  Click on the link below to run Fix it which will help you to solve the problem.

  Tips for solving problems of USB devices

  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx

  Click on the link below and install the update.

  Rollup cumulative update for USB in Windows Vista Basic components

  http://support.Microsoft.com/kb/941600

  Try to connect the camcorder to the other USB port and on the other computer and see if the problem is resolved.

  Method 3:

  Let us try to disable the Antivirus security software and check the number.

  Re-enable the security software after checking the issue.

  You can also try disabling the firewall and check the issue.

  Re-enable the firewall after checking the issue.

  Method 4:

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure.

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot

  Step 2: Enable half the services

  Step 3: Determine whether the problem returns

  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns

  Step 6: Resolve the problem

  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  After checking the problem, turn the computer back to the Normal mode.

  Uninstall or update the program that is causing the problem.

  Check whether the problem is resolved.

  You can also check out the link below.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/6be4581d-8fbd-407F-815E-b475c35ca586

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Root of the unknown device. ISATAP\0017

  I get pop ups telling me to update this unknown device when I first turn on the computer now Im up to about 10 popups and when I try to update... he can't do something is not.

  Hi Grannytotwo,

  ·        Do you have any external USB or firewire devices connected to the computer?

  If you have any external device connected to the computer via USB or firewire, you can disconnect all devices and start to connect the devices one by one and check which device is causing the problem and post back the result.

  You can also open the Device Manager and check that the unknown device and make a note of the error and after return from the error code. Access the link below and follow the steps to open the Device Manager.

  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

  Also, you can try to update the drivers for the unknown device in Device Manager and check if it helps. Access the link below and follow the steps to update the drivers.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• mouse has suddenly stoped working and shows as unknown device

  using the mouse to knit and then all of a sudden he stopped, I don't have the $ to buy another ball order now and I'm hooked on it Ive tried system restore, remove the unknown device and using a driver specifically for him to install it. Ive tried using the vista remove the plug & read file so that it can reload the file and try agine of device as some sites say to do and it won't work eather so I tried a wipe of total power reset the motherboard and I tried other usb ports and I tried to use other devices in them , they work Ive tried takeing all devices under stop and restart with only the mouse, ive tried to remove all usb drives and restart the computer with just the mouse, Ive tested the mouse on some of my other computers and it works on all of them it is the only computer that vista im runing on but as the mouse worked a year already on the vista any ideas how to run im Miss ideas.

  Hello j_waver0000,

  Thank you for using the Microsoft Windows Vista Forums.

  I would like more information on what brand and model of mouse you are using?  I know that you listed Trackball, but I show several manufacturers using the name of trackball, including Microsoft.

  Have you informed you have uninstalled the mouse drivers, have you done this in Device Manager?   "Click Start-> type Device Manager" in the search field-> select Device Manager-> select mice and other pointing devices-> with the right button of your device, and then select update.

  If the device is already updated and then right-click and select "Uninstall".  You may be prompted to restart, otherwise right click again on your device and select "install".

  If you have a Microsoft Mouse, please visit this link for additional information.  Please let us know status.  Thank you!
  Microsoft Hardware
  http://www.Microsoft.com/hardware/ engineer in Support of James Microsoft answers visit our Microsoft answers feedback Forum and let us know what you think.

• IHAVE pavilion g6 2006tx with win 8.1 pro ineed driver for the unknown device

  driver for the unknown device

  Hello:

  This is the driver you need for this device:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-116584-1&cc=us&DLC=en&LC=en&OS=4132&product=5278311&sw_lang=

• Re: Satellite C660 screen brightness adjustment does not work

  Hello

  Its been 10 days since I brought my Satellite C660 - series laptop.

  Fn + F6 or Fn + F7 keys for brightness control do not work. I see no change in brightness. There is no information or indication of the setting shown on the display.

  Can anyone suggest an alternative to set the brightness of the screen?

  Other keys FN + Fx work correctly?
  You can change the display brightness by using the power management option?

• try to install OTA, bb poster it works but not the app download page

  I pushed the app to Web server, flies over the pot here

  and cod files, jar file, and when I point to the .jad with my bb browser file,

  It shows a screen that says

  It works!

  but it's not the confirmation page to download and install the application

  mime types are confirmed to be correct on the Web server (with firefox)

  what the hell could I do it wrong?

  It is hosted in a https connection, but that shouldn't make a difference

  Origin of the text "it works!"?

  Kindof looks like a test page default for the web server.

  You have your types JAD is set incorrectly, or you have the incorrect URL.

• Samsung Ativ tab 3 power button doesn't work does not, the device always at 0% battery

  I write about a Samsung Ativ tab 3 I bought recently.

  The item was bought September 26, 13, model No. is XE300TZC-K01AE. The morning of October 3, 13, I noticed that the screen was frozen and not unlock when you press the power button. After pressing the Windows button under the screen, login screen came and I was able to connect to Windows. On the home page, noticed that the battery was at 0%, although there were about 45% of charge about 7 hours at least. I plugged in the charger, but the battery was drained down and power off the device. If the charger is plugged in, the blue light was not on and also the device wasn't turning on. The charger was kept connected up to 16:00, but the unit was still not turn on. After several calls and discussion with Samsung, the unit was sent to a service center for repair and the 10 - Oct.

  The device worked absolutely very well once again, until last night. Yet once again, the device froze and power button did not work and the Windows button has been used to unlock screen after several attempts. Battery was showing 0% despite his accusation of 78% 15 minutes previously. The connection of the charger, the battery was still at 0% but not more. Fortunately this time around the closed device not down, but after 3 hours of connection of the charger, battery is always 0%. I would like to know any suggestions to help solve this problem. I tried to restart the battery APC controller in Device Manager, but there was no improvement. I am also attaching the powercfg command results.

  

  Rgds,

  Remy

  two days later... the solution seems to be to simply keep going & not connected until the battery is empty (support of important things upwards at the same time). The fact that it took several days, I understand that the warning 'battery 0' is part of the dysfunction. During this time, you can sleep it w manually control 'turned off' in the bar of charms, ensuring not to turn it off (cos then you will not know if the battery is still empty) and turn it on the original key w.

  Once the battery is completely empty (no response from the original key, little blue light by power button / stop), you plug it in and it works.

  My guess is that explains what has happened before, when I (and others I read) he sent for repair. At the time where he got at the workshop had drained the battery, so they connected, found it worked, and he came back with a message like "you must have forgotten to load," the missing issue.

  Let's see: if it is something that happens after a few months, & it's easily solveable, it isn't so bad. As much as we can always use it in the meantime that the battery is empty.

  Wonder if regularly leave the battery can drain ever few months would avoid the phenomenon?

  Be interested to hear what others have found.

  Rivka

• Impossible to get my work song go full screen. Worked well at the same time, and I click Ctrl

  I have windows 10 on a Lenovo laptop. I downloaded the images from the internet and using them as work for each song in iTunes. The use of ability "full screen" to work properly, but now it is (in gray), and I can't get the photos in full screen to come. The small images at the top still are appearing, but I no longer use (CTRL + left CK) to enlarge. Help, please.

  CTRL + click piece works here.

  Because you're running Vista what version of iTunes, you're running? You should be on 12.1.3.6.

  TT2

• is there an alternative photo management system that works (and NOT the pictures)

  Y at - it another app that works better than the pictures, that we can use to manage the photos, because they took iPhoto and replaced it with pictures?  Is there a way just to import photos and save them to your computer in folders, as you would on a Windows system? And then maybe just use Picasso or something?

  You can still use iPhoto if you are eligible:

  Terence Devlin

  April 14, 2015 14:21

  Re: Iphoto's gone? I want to go back!

  Go to the App Store and check out the shopping list. If iPhoto is there then it will be v9.6.1

  If it's there, then drag your existing iPhoto application (not the library, just the app) in the trash

  Install the application on the App Store.

  IPhoto is sometimes not visible on the shopping list. It may be hidden. See this article for more details on how to view it.

  http://support.Apple.com/kb/HT4928

  A question often asked: Will I lose my Photos if I reinstall?

  iPhoto, the application and the iPhoto library are two different parts of the iPhoto program. So, reinstall the application should not affect the library. BUT you should always have a back up before doing this kind of work. Always.