ProBook 6570b: VTx is enabled in the BIOS but does not work

Hello

I use ProBook 6570 b after update, with Win 7 Profesional 64 b (a second) i'm running a bios F.62 Rev.A April 7, 2015, that I got from HP support web site. I activated the VTx in bios but its seems that this is not enabled (the Microsoft virtualization detection tool used).

I turned the PC out to the battery, expected 15 min, upgrated bios 2 x and it still does not seem to work.

Any ideas? Thanks in advance

Hi, it fixed by uninstalling Avast antivirus, does not help turn it off, you must uninstall it.

Thanks anyway

Tags: Notebooks

Similar Questions

  • Pavilion dm4 2191 - us: Virtualization intel enabled in the BIOS but still not detected by HAXM insataller

    Recently, I was working on android, for AVD requiere (VT - x) is activated. After some research on the forums, I have it enabled in the BIOS (photos attached) but still have the error. I checked the hardware-assisted virtualization detection tool. I also updated the BIOS but still had the same problem. Kindly help me.

    Hello:

    See if the solution of Paul works for you:
    http://h30434.www3.HP.com/T5/notebook-hardware/hardware-virtualization-enabled-in-BIOS-but-not-detected-by/m-p/4889931

    Concerning

    Visruth

  • The BIOS clock does not work after upgrade to Windows 7

    XW4300 workstation has been recently updated to Windows 7 from XP pro.  After the update, the system clock did not keep accurate time, then I entered the BIOS Setup and set the time here.  After several hours, I rebooted, entered the BIOS configuration and noticed clock BIOS had not changed.  I replaced the CMOS (CR2032) battery with three different batteries and BIOS clock does not always change.

    Occasionally, Windows 7 system clock will synchronize to the BIOS clock, which creates the incorrect time in Windows. I can see these events in the system event log.

    Is it possible that this problem is related to the Win 7 upgrade, or is it a problem without a report?  Suggestions to control or fix the BIOS clock beyond what has been done so far?  If I can't fix the BIOS clock, is it possible to prevent the synchronization of the clock in the BIOS Win 7?

    ERICO wrote:

    Replace the jumper CLRCMOS or CLRRTC to its original position after erasing the CMOS memory and flashed the BIOS? If you do not then the time will be reset whenever you turn off the PC.

    I have not found a CLRRTC jumper on the 4300.  Is there a jumper to reset the password (E49), and a CMOS reset button.

    However, I tried to reinstall the battery with power supply cable disconnected, and it reset the CMOS all anyway.  Reset the CMOS seems to have solved the problem.  BIOS clock has now begun to follow the exact time again.  I rebooted several times now, and the time is now correctly.

    Thank you all for your suggestions.

  • The BIOS update does not work on the Satellite - cannot load PHLASHNT.sys

    "Cannot load the PHLASHNT.sys driver.
    It gives then a few silly respons to check if you have admin rights or not.
    Under windows, very nice everyone has admin right here, that the problem with this :-/

    Hello Clemens,

    PHLASHNT. SYS is flash Phoenix NT driver that is necessary if you're updating a Phoenix BIOS. However, you don't tell what Satellite phone model you update or what version of the BIOS update you are using (Windows or traditional). Please send additional information so that we can try to help you with your problem.

    Kind regards

  • Display the Properties dialog box when you click the icons on the desktop, but does not work

    I use windows vista. This morning after a normal start, any time I click on a desktop icon to open the properties of this program, but not the program itself. What happens to all the icons.

    Hi AmyWilliams,

    1. you remember to make changes to the computer before this problem?

    2 are you able to open the program when you right-click on it and select open?

    Step 1:

    You can check the following link and try to run the Fixit and check:

    Difficulty of broken desktop shortcuts and common system maintenance tasks

    Step 2:

    Given that this issue has started recently, you can also try a system restore and check.

    You can try to perform a restore of the system to a prior restore point you have been affected by the issue.

    Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

    To run the system restore, you can consult the following link:

    System restore

    System Restore: frequently asked questions

    Hope this information is useful.

  • Links working in the preview, but does not work after the FTP download

    I have multiple master pages in my muse adobe site and all works perfectly links in the preview. After download of however, and visit the online site, two links in my master page won't work. On another master page, all the links do not work. I also have different skins for hover, active and visited States and some links work but do not properly follow their States. Pointing the cursor over the links that don't work as turns the mouse in the insertion cursor of type rather than the link hand cursor, as if links aren't links at all, just the text. I have had this problem before, when the first generation site and was able to get technical support for adobe to fix it for me through some troubleshooting by chat. However it happens to more of my links now. I have everything set up according to the interface of muse adobe that it should work fine. I have no idea why I continue to encounter this problem. Any help would be appreciated! Thank you

    On your model page to make a selection of all the... CTRL/A or CMD/A to select all elements on the page. Looks like you have some invisible items you overlapping menus. Alternatively, you can try to right click on your menu and then "put at the top". Hope that helps. If this isn't the case, you can provide a link?

  • Insert 'head' should put content in the header - but does not work

    Insert

    Head

    Meta

    Provides a call box to complete the description or other metadata.

    Since it's in the "head" insertion area, presumably that would mean everything you enter would go as a meta tag in the header. Down a here it inserts everywhere where the cursor is.

    Is this a bug?

    Or is there some reason why a meta tag would be inserted into the body, but will be listed as an insert in the head?

    I rarely rely on the panels of the insert.  But what you describe is exactly how it works for me in CS6. Code snippets is inserted in the same way.   You must put your cursor at the correct insertion point.

    Nancy O.

  • I put the password in the bios but does not understand why my key board won't type help

    Hi, can help them,

    I put a bios password on my pc which was just okay.
    now when I turn on pc I can't type the password as unusable key board.
    I understand reading the forum there is a rider?
    no idea how I can find a rider that is and what I need to do to use it.
    Thanks for any help that may be available.
    Best regards, nigel.

    Try the steps in the atricle below

    http://www.computerhope.com/issues/ch000235.htm

  • Instrunment: Works to "Highlight the execution", but does not work in an ordinary execution

    First of all how can I copy and paste of LabView code for the forum? I just do ctrl + c and paste it into the section "insert code"? If so, I tried to do that and it didn't work, would it because I am using a trial version?

    Come to the main point, I take medium-sized measurements of a multimeter. With the while loop measures in its own code snippet, it works but when I try to put it together with my original code I get this error:

    Reference not found: (xBFFC0012) Impossible to extract data from user for the given resource name as there was no data in the name of the resource.  Before you can read the data, you must write the data of the user by using the action to write data of this user data VI.

    However, when I run with 'Performance to highlight', I get an error. Anyone know what could be the problem or how to fix?

    Thank you

    William

    Hehe, now that I have started working on it. I have the problem that you have highlighted.

    I changed my program leaving the VISA section find resource as a stand-alone section then made a structure for the part of the measure of the event.

  • my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

    my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

    You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

    Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

    Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

    Step 1

    VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

    Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

    Step 2

    When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:

    /Library/LaunchDaemons

    In the Finder, select

    Go ▹ go to the folder...

    from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

    A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

    There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

    Step 3

    In the LaunchDaemons folder, there may be one or more files with the name of this form:

    com Apple.something.plist

    When something is a random string, without the letters, different in each case.

    Note that the name consists of four words separated by dots. Typical examples are:

    com Apple.builins.plist

    com Apple.cereng.plist

    com Apple.nysgar.plist

    There may be one or more items with a name of the form:

    com.something.plist

    Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

    These names consist of three words separated by dots. Typical examples are:

    com.semifasciaUpd.plist

    com.ubuiling.plist

    Sometimes there are items (usually not more than one) with the name of this form:

    com.something .net - preferences.plist

    This name consists of four words (the third hyphen) separated by periods. Typical example:

    com.jangly .net - preferences.plist

    Drag all items in the basket. You may be prompted for administrator login password.

    Restart the computer and empty the trash.

    Examples of legitimate files located in the same folder:

    com.apple.FinalCutServer.fcsvr_ldsd.plist

    com Apple.Installer.osmessagetracing.plist

    com Apple.Qmaster.qmasterd.plist

    com Apple.aelwriter.plist

    com Apple.SERVERD.plist

    com Tether.plist

    The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.

    Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

    If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

    If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

    Step 4

    Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

    ▹ Safari preferences... ▹ General

    and click on

    Set on the current Page

    If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

    The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

    Step 5

    The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

    Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

    Step 6

    This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

  • access BIOS, f10 does not work

    Model HP 110 - 23W, 8 GB of RAM, 2-Core Intel, "Refurbished" (cheap)

    Hoping to access BIOS to call works by timer.  To power, when 'HP' appears on the display, repeated F10 pressures have no effect another keep the dark screen before appearing the welcome admin screen.  HP provides another way to access the BIOS?

    -rlsj

    You are the very welcome.

    There is also another way to access the BIOS when the ESC key does not work on the PC W8.

    Please read the info at the link below.

    http://www.MakeUseOf.com/tag/how-to-access-the-BIOS-on-a-Windows-8-computer/

    I don't think that you will not be able to access the BIOS due to the limited improvement you can make to the computer.

  • I have a Hp and the micro build does not work how to fix this?

    Can someone help me please? I have a HP T5800 and the micro build does not work how can I solve this problem?

    Hello

    Check with HP, their drivers support and documentation online and ask in the forums about known issues.

    Support HP & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    ========

    It's probably the pilots who are responsible and who may not really be later or they need to be
    re-installed anyway. The best way is to manually review using the methods below.

    References to Vista also apply to Windows 7.

    Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek High
    Audio definition (this is an example and you can have an other name/maker).

    Write the description and the model double click on it - tab drivers - write down
    Version. Now click on update drivers who cannot do anything as MS is far behind certifying
    drivers. Then CLICK RIGHT on it and UNINSTALL - REBOOT - this will rebuild the driver
    stack.

    You can have the default windows or a former certified pilot and it's all or part of the
    issue.

    Now, go to the site of the manufacturer of the system and get the latest Audio/Sound drivers - download - SAVE - go to
    where you put - right-click on Reboot - RUN AS ADMIN-

    Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
    and then install the latest version. Restart and check after each test, not
    rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
    installed shows upward on the tab of the driver.

    Go to the site of the manufacturer of the device, and then search for the even more recent drivers and install repeat
    operating mode. Download - SAVE - go to where you put them - click on - RUN AS
    ADMIN - Reboot

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers to 7 (updated drivers manually using the methods above is)
    to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    ---------------------------------------------------------

    After the updated driver.

    Click with the right button on the speaker near clock - recorders - right click in the box - check see the
    Disconnected devices and show disabled devices - check your micro - highlight
    then on lower right properties. Make sure that the appropriate injector is selected and check
    other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change
    .

    Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
    is the RealTek Audio Manager, yours can be quite different name if you have one.

    How to activate Audio devices hidden in Vista
    http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

    Connect one microphone, music player or other audio device to your computer
    http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

    Problems with sound and audio or no sound - a Mr Fixit
    http://support.Microsoft.com/GP/NO_SOUND

    Tips for solving common audio problems
    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

    The volume of the audio recorded by sound recorder in Windows Vista or in Windows 7 is less than
    in Windows XP (or Vista)
    http://support.Microsoft.com/kb/973446

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • As I installed the latest OS 10.0.1 on my iPhone, the Pandora app does not work.

    As I installed the latest OS 10.0.1 on my iPhone, the Pandora app does not work.

    Have you installed the latest update of Pandora (version 7.6), posted on September 13, 2016?

  • How to copy and paste into the search engine does not work?

    How to copy and paste into the search engine does not work?

    It should be.

    Restart your Mac and try again.

    Other than that, make sure that OS X is updated.

    Open the App Store, and then select the updates menu.

  • When in my wordpress dashboard, the Visual Editor does not work?

    Regularly when I'm in my wordpress dashboard, the Visual Editor does not work. Sometimes, not all the time. I tried the following:
    Disabled individual plug-ins
    Theme modified
    cache cleared
    uninstalled, then reinstalled Firefox
    'disable the Visual Editor' unchecked

    Thanks a lot for any help

    When this happens, you are totally unable to type/edit in the edit box, or are there limited functionality? The toolbar appear?

Maybe you are looking for