probs with CD writing

Similar Questions

• resolution of problems suggest prob with codecs? Remember to come to the top, not easy to use?

  the difficulty for the days? using D Link for the wireless, prob with codecssays convenience store? not easy to use?

  Your message is in the forum for the users of the software program anti-malware for Microsoft Security Essentials (MSE).  Don't know what "convenience store" you mean but MSE lacks a convenience store.

  If you are referring to a "convenience store" on your router, suggest to communicate with the D-Link Forum at http://forums.dlink.com/.

  Or you can ask for help in the Forum Windows http://answers.microsoft.com/en-us

  Good luck...

• I try to install vista on a computer running xp. XP does not even recognize the vista disc is in the drive. XP recognizes any other drive that I use and the vista drive is recognized on other computers, that I put it in it's not a prob with the disk or cd

  I try to install vista on a computer running xp. XP does not even recognize the vista disc is in the drive. XP recognizes any other drive that I use and the vista drive is recognized on other computers, that I put it in it's not a prob with the disk or cd rom

  The Vista installation disc is a DVD. Apparently, you don't have a DVD player. You would need to purchase/install a DVD-ROM or DVD - RW to install Vista. Are you sure that your hardware supports Vista before doing this?

  http://www.Microsoft.com/Windows/Windows-Vista/get/system-requirements.aspx
  Even if a minimum of 1 GB, the requirements in the real world Vista requires a minimum of 2 GB of RAM to run without problem. You will also need Vista drivers for all your hardware.

  http://www.Microsoft.com/Windows/Windows-Vista/get/Upgrade-Advisor.aspx MS - MVP - Elephant Boy computers - don't panic!

• Where should I go? message on LED on officejet 6500 has more "Prob with ref doc printer 0 < 61011 bed.

  Where should I go?  message on LED on officejet 6500 has more "Prob with ref doc printer 0".<61011>

  See the steps in this troubleshooting page.

• NEW Prob with the creation of Itunes folder

  With the help of wind 7. Sorry if I post in the wrong place... first post

  I use Itunes 10.  I tried to update recvd ' message cannot get server '.» I will update later, or can someone tell me the answer to this problem?

  My main problem is I moved my library in another drive.  Lost all my playlist, etc. (always have the files).  Tried many variations of repair by trying some other .itl file and .xml files. Now finally decided to REBUILD (have all music, etc.).  My BIG problem is that I can't start AGAIN.  I try and deleted all the folders to Itune.  Trying to FIX this prob. I created a situation where when ITunes all my Itune for opening files pop up on my desk.  I made changes in the preferences (location changed Itune file) but Itunes still removes the files on my desktop...  ICAN can't stop it. I uninstalled Ver 10 (after trying to update) and always the same prob.

  Please PLEASE HELP... Sorry to say, I have worked with it for 3 days and I got frustrated and lost. Please help me get this new database has started, and I'll pick the prob of update as soon as POSSIBLE.

  Thank you

  iTunes data appearing on the desktop may be the result of incorrect permissions. For more information, see fix for iTunes for Windows security permissions . Take a look at make a library of portable split. If you want to create a new library, you need to press on and hold the SHIFT key as you launch iTunes, then use the option to create a library. If you still have the old .itl file I can help you fix the library if you put all the pieces together in the standard layout.

  TT2

• Screen on Satellite C series is black with white writing

  Hello

  I need help, I've only had the phone for a few weeks so still to get used to it. (first computer).
  It was working fine but now I have a black screen and all the writing is white and yellow.

  Either I or my children have touched something we shouldn't have, it still works very well that the screen is annoying
  and not all icons appear.

  Also need help with a printer to use with this laptop, which is best to use.

  Thanks for any help you can give me Jo.

  > It was working fine but now I have a black screen and all the writing is white and yellow.

  Please don t be angry with me, but your description isn't very useful.
  First you don t say anything on your laptop model and the system you are using.

  Secondly you said something about white and yellow writing on the black screen, where did you see that?
  It is not by using special software such as Microsoft Office Word?

  Please share more details with us!

• Can I use a probe with my NI4461 to measure the 100vpp(permanent)?

  Hello

  I use a NI4461 card with 2 inputs and 2 outputs. I have a signal generator with a signal of 125 Hz 100vpp(permanent) I want to characterize using labview (FFT, amplitude, etc.).

  The limits of entry on the NI4461 being +/-42 .4V, I was hoping to use a X 10 probe, which is similar to a scope.

  However I find this works do not correctly in the mitigation of the probe doesn't seem to be a constant 10 x. Although my reach (with a second probe) reads 100vpp(permanent), my NI4461 detect 82Vpp.

  Am I missing something? Are there alternatives to read > 42.4 v reports on the 4461 with a probe?

  I checked and exchanged probes and they both work find on the scope, but not on the 4461. Is there a special probe that has a match of good impedance for the 4461 you can recommend?

  Thank you

  Thanks for the suggestion.

  I actually build an out two very large resistance voltage divider which seems to work fine.

  The circuit is simple, two resistors in series connected to the ground at the same time on my main unit. By attaching the son of sense of tension on a single resistance I can divide the voltage in two (two resistors have the same index). I calibrated the system and it seems to work.

  Thank you for your suggestions.

• Problem with string writing series

  I'm using labview to send commands to a device using the serial port com1.  Using the example VI "Base series in reading and writing", I can communicate with my hardware very well, can write and can read.   the problem comes when I want to edit the VI by using my own string instead of the string provided in the example.  When I create a string constant with the exact text that was in the example string box, I can not write my material.

  I don't understand why this wont work.  Is there something special about the example of the VI text 'string to write' box that I don't know?

  Help, please

  Thank you

  I know what you mean and it does not work like that.  For some reason if I use a string with \r\n constant it still does not work.

  Anyway, I solved the problem in a roundabout way.  The command I sent you is a word but both parties; first part, second part number.  I want to create a loop when the number changes.  I was able to do this by combining three channels, the first is a copy of the example string, the middle is my number converted to string, the third is a different copy of the string of examples.  Now it works and I can with my life

• I have a prob with d3drm.dll

  a window appears sying "prog requires d3drm.dll which is no longer included in this version of windows" (vista ultimate). Ive tried to download said file but get then stopped in my tracks by an another prob, saying: "this file has no program associated with it for performing this action. Create an association in the Association contrl Panel set"How do the __ I do that I am only a layman. HELP, SAM

  It seems to me that you try to install a program that is not compatible with Vista.  What program is (and which version)?  You can check for the compatibility of the Vista Compatibility Center program at the: http://www.microsoft.com/windows/compatibility/windows-vista/default.aspx.  You cannot create an association to a .dll file - this is an error message saying basically that you can not use the copied file to do what you wanted to do (because it is not included in Vista while it was probably included with the other previous operating systems of Windows).  It is an obsolete file and if this is required for the program to run then you probably will not be able to run this program under Vista.

  You can try running it in compatibility http://www.howtogeek.com/howto/windows-vista/using-windows-vista-compatibility-mode/ mode but I don't think it will work if the file is not located anywhere in the system (as seems to be the case), and the file is required to run the program.

  Sorry for the bad news, but see the program in the Compatibility Center and if it is compatible then we should be able to find a way to make it work despite this file problem.  If it's not compatible, then you have your answer.  Is it is not listed, then it is unknown, but maybe if it's probably not compatible.

  Good luck and I hope this has helped. Lorien - a - MCSE/MCSA/network + / A +.

• BlackBerry Smartphones little prob with my storm

  The prob I have is a simple... but an aggravation. In the upper left corner, there is a small yellow envelope with a '9' next to him... Wait wait I know I know he means I have 9message but I checked my voicemail by email from text sound empty all, when I get a text or something the number goes so somehow the phone thinks I have upper 9messages... I know not what it means or what I can do, any ideas? \

  Thank you

  -Ry

  -go through each of them again and make sure that you are not missing, I don't know you done thia already, but it has worked for 7, should work for the rest. You can also check the browser and push menu and look for messages from the browser.

  -If still not resolved, reseting try to take out the battery and put it back in.

• expdp with parallel writing in a single file on the OS

  Hi friends,
  I am facing a strange problem. Despite giving parallel = x parameter the expdp is written on a single file at the level of the OS at a time, even if it's written in several files in order (not at the same time)
  
  While on other servers, I see expdp is able to start writing in several files simultaneously. Here is the example of newspaper
  of my expdp.
  ++++++++++++++++++++
  Export: Release 10.2.0.3.0 - 64 bit Production on Friday, April 15, 2011 03:06:50
  
  Copyright (c) 2003, 2005, Oracle. All rights reserved.
  ;;;
  Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64 bit Production
  With partitioning, OLAP and Data Mining options
  Start "CNVAPPDBO4". "' EXPDP_BL1_DOCUMENT ': table CNVAPPDBO4/***@EXTTKS1 = BL1_DOCUMENT DUMPFILE=DUMP1_S:Expdp_BL1_DOCUMENT_%U.dmp LOGFILE = LOG1_S:Expdp_BL1_DOCUMENT.log CONTENT = DATA_ONLY FILESIZE = 5 G EXCLUDE = INDEX, STATISTICS, CONSTRAINTS, GRANT PARALLEL = 6 JOB_NAME = Expdp_BL1_DOCUMENT
  Current estimation using BLOCKS method...
  Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
  Total estimation using BLOCKS method: 23,93 GB
  . . exported "CNVAPPDBO4." "' BL1_DOCUMENT ' 17,87 GB 150951906 lines
  Table main "CNVAPPDBO4." "' EXPDP_BL1_DOCUMENT ' properly load/unloaded
  ******************************************************************************
  Empty set of files for CNVAPPDBO4. EXPDP_BL1_DOCUMENT is:
  /tksmig/load2/Oracle/postpaidamd/DUMP1_S/Expdp_BL1_DOCUMENT_01.dmp
  /tksmig/load2/Oracle/postpaidamd/DUMP1_S/Expdp_BL1_DOCUMENT_02.dmp
  /tksmig/load2/Oracle/postpaidamd/DUMP1_S/Expdp_BL1_DOCUMENT_03.dmp
  /tksmig/load2/Oracle/postpaidamd/DUMP1_S/Expdp_BL1_DOCUMENT_04.dmp
  Work "CNVAPPDBO4". "' EXPDP_BL1_DOCUMENT ' successfully completed at 03:23:14
  
  ++++++++++++++++++++
  
  

  uname-a

  HP - UX ocsmigbrndapp3 B.11.31 U ia64 3522246036 unlimited-license user
  
  
  He hits a known bug? Please suggest.
  
  regds,
  Malika

  http://download.Oracle.com/docs/CD/E11882_01/server.112/e16536/dp_export.htm#i1006259

• ProBook 6550 b: new Prob with drivers

  Hi just questions over to install Win7 on my laptop hp6550b, all this because the speakers conked... now the speakers work... and not much else not
  Here are the codes for 'yellow' Device Manager bits

  PCI simple Comm Contoller

  PCI\VEN_8086 & DEV_3B64 & SUBSYS_146D103C & REV_06

  PCI\VEN_8086 & DEV_3B64 & SUBSYS_146D103C

  PCI\VEN_8086 & DEV_3B64 & CC_078000

  PCI\VEN_8086 & DEV_3B64 & CC_0780

  Network controller
  PCI\VEN_8086 & DEV_4239 & SUBSYS_13118086 & REV_35

  PCI\VEN_8086 & DEV_4239 & SUBSYS_13118086

  PCI\VEN_8086 & DEV_4239 & CC_028000

  PCI\VEN_8086 & DEV_4239 & CC_0280

  Ethernet controller
  PCI\VEN_8086 & DEV_10EB & SUBSYS_1471103C & REV_05

  PCI\VEN_8086 & DEV_10EB & SUBSYS_1471103C

  PCI\VEN_8086 & DEV_10EB & CC_020000

  PCI\VEN_8086 & DEV_10EB & CC_0200

  (1) base system device

  PCI VEN_1180 & DEV_E230 & SUBSYS_146D103C & REV_01

  PCI VEN_1180 & DEV_E230 & SUBSYS_146D103C

  PCI VEN_1180 & DEV_E230 & CC_088000

  PCI VEN_1180 & DEV_E230 & CC_0880

  (2) base system device
  PCI VEN_1180 & DEV_E852 & SUBSYS_146D103C & REV_01

  PCI VEN_1180 & DEV_E852 & SUBSYS_146D103C

  PCI VEN_1180 & DEV_E852 & CC_088000

  PCI VEN_1180 & DEV_E852 & CC_0880

  And 2 unknown device:

  Value ACPI\HPQ0004
  and

  USB\VID_138A & PID_0007 REV_0072

  USB\VID_138A & PID_0007

  I had installed about all the drivers on the site of HP drivers

  And the Tower say... except these few... hoping these will get my

  N wifi internet back :-)

  Thanks in advance
  Vlad

  Hi, Vlad:

  You need these drivers...

  PCI simple Comm Contoller:

  This package provides the driver Intel Management Engine components and the Interface.

  FTP://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59684.exe

  Network controller:

  This package contains the required drivers to activate the adapter functionality taken on laptops Intel wireless LAN supported with supported operating systems.

  FTP://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58782.exe

  Ethernet controller:

  This package contains the driver for the Intel 82577LM and 82577LC Gigabit Ethernet Controller install package in support of the laptop models running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp53501-54000/sp53806.exe

  Device system base (1) & (2)

  This package contains the Ricoh Media Card Reader Driver for the notebook models and operating systems. The Ricoh Media Card Reader driver allows the multimedia card slot built-in.

  FTP://ftp.HP.com/pub/SoftPaq/sp46501-47000/sp46999.exe

  HPQ0004:

  This package provides HP 3D DriveGuard to the notebook models and operating systems. HP 3D DriveGuard receives notifications of the built-in accelerometer and protects the hard drive (HDD) by automatically "the heads of parking" to reduce the risk of damage if the laptop is accidentally moved or deleted.

  FTP://ftp.HP.com/pub/SoftPaq/sp53501-54000/sp53795.exe

  USB\VID_138A:

  This package contains the driver that allows the validity fingerprint sensor in the notebook models that are running a supported operating system. The fingerprint sensor analyzes fingerprints for use with biometric security applications.

  FTP://ftp.HP.com/pub/SoftPaq/sp66501-67000/sp66915.exe

• Technique no woman Dozy has prob with the sound driver

  My apologies to all that you technical guys - probably an easy one (I hope)
  I have a notebook Satellite - no idea what model (useless?)
  He said HIS 40-702 on the bottom! I can't find any listed information that relates to this model. I "lost" driver for my multimedia audio controller.
  In Device Manager, the type is another unknown manufacturer, location PCI bus 0, device 31, function 5. State of the device - driver not installed (code 28) Reinstall driver does not work, and I lost my original disc to be even more useful!
  How useless? I need a Knight in the shining armor to point me in the right direction please.

  Thank you.

  Hi wife dozy,.

  Try with this one.

  http://support.toshiba-tro.de/tools/satellite/SA40/win-xph/sound-SA40-XP-512013670.zip

• One of the Probs with calendar synchronization

  Mine wont sync with my Gmail more ideas

  OK I'll be back to work Woo hoo

  This iz what I did

  Settings > Applications > manage Applications > then Gmail App > clear data

  and it started working

• What is the channel set up to measure the axial thrust of the probes with Tomas eZ software and a data logger IOtech

  Y at - there anyone out there who can give advice on setting up a probe of the axial thrust in eZTomas. I tried all the configurations that I can think of, but the gauge still shows just a full scale even when I connect a battery 9.5V.

  Hi all

  I have saved the document in PDF format and transferred here for reference. Download this and I hope that you will be able to see the splendid document, Dave has created.

  Kind regards