Process can be configured to run after logout?

Similar Questions

• Satellite L550 - 13 c - can't configure Windows after system recovery

  After using the windows recovery discs, I get the message,
  + Can not configure windows to run on this computer hardware. +

  I changed the hard drive in the past, and after that reinstalled the software with the same disk without problem. But now it does not.

  Any advice?

  Best regards, HAns

  Have you used the new HARD drive with the same size?

  Probably the image of Toshiba is unable to configure the system due to the size of the HARD drive.
  But to be honest: the size of the HARD drive should not be a problem and so it's just a guess

  However, the fact is that the Toshiba Recovery disk would fix the laptop back to factory settings. This means that even the new HARD disk should be partitioned and the same partitions can be created on the new HARD drive.

  You could overcome this procedure using a Microsoft Windows installation disc.
  Of course the Toshiba drivers must be downloaded separately from the Toshiba page and installed after the installation of the Windows System.

• How can I configure my computer to run an application using only a specified quantity of my carrots?

  OK, I have a game called Star Wars: Knights of the Old Republic. The game does not use more than 2 cores, the problem is when I start the game without going through the Task Manager and manually set its priority to 2 hearts my usual game show on my screen, it will be black so I have to run the Task Manager to force the game to close. So what I'm saying is that whenever I want to play the game or launch the application, I have to open the Task Manager, find the game or application, and then right-click to set the number of cores in the processor to use and sound really get some tires. I was wondering if there was a way to instruct your computer to use only 2 cores at the launch of this game. I have Window 7 Home Premium, 8 GB of RAM and a graphics card in Asus R9 280.

  Some cpu overclocking tools have a basic framework of cpu, and you can make a profile for these games, which limits the number of cores. In the past I've used used AMD OC tool for this.

  -If your cpu is Hyper-threading, try disabling Hyper-threading technology.

  -J' saw a few messages about this game, but don't remember any specific game fixed and did not

  heard of him having a problem with quad core cpu.  I have no problem with a quad core cpu with AMD Phenom 965 or Intel 3570 KOTR.

  It is installed without using any sort of compatibility settings. I'm surprised I didn't even

  fixes, or patches. It seems to work without the CD, if you use the StarWars - KOTR.exe spot

  of the LaunchKOTR.exe as well.

  He has run correctly on GTX560ti, GTX770, HD7970 and Intel HD4000 chart, but I don't have

  reminder if she had a little problem with running in a window with pilots earlier or not. Probably not as

  the same happens when you use the Intel HD4000 graphics.

  I just found (rediscovered?) that the game always starts in windowed mode

  (there is no option of mode in the settings or .ini however), but if I change the resolution

  It goes full screen in one of the other options 1280 x 1024 (there are three of what appear to be the same resolution and refresh speed settings).

  When you use two Intel HD 4000 graphics the graphics settings are also not available.

  [EDIT: my machine with the PhenomII965/GTX560ti doesn't have this problem of windowed mode.]

  It is quite rare for games to have real issues with quad core cpu.  Fallout 3 is the most recent

  I met (Yes not nearly as old as KOTR), and it took a change in the configuration file

  in order to limit to two hearts.

  I also had a couple of games that are configured to run on a single core at the Phenom 965 CPU usage at the time.

  I used the AMD OC tool to create a profile with all but a core disabled, for each of these games.

  -I do not use a parameter core with any games ATM, but some games running on

  my machine with Intel processor and 770 a short while back only works on atm HD4000 Intel

  (Memory, they were OK with the HD7970, using the version of the driver 13.9 or 13.12?) ).

  Games that only work with Intel HD graphics card on the machine with the GTX770, always works on my machine with a PhenomII 965 and GTX560ti. Go figure...

  .

• Unit test: is there a way to make the dynamic query of the value of running after the boot process?

  I wonder why the dynamic value query is executed before the boot process? Logically, it makes sense to run after them.

  For example, I test a stored procedure that is supposed to delete a record, and I'd like to create this test report should be deleted as part of the startup process before execution of the stored procedure call to delete this test record. Apparently the dynamic query of value not returns not the test report in as long as the query parameter to call the stored procedure under test, which makes me think that is executed before the startup process of design...

  Please advise...

  Thank you

  Val

  As this thread does no traction/attention of the team of SQL Developer for a while, I had to submit a request for formal improvement on metalink:

  RE: 19834977 - IN THE UNIT TEST REQUEST TO ALLOW TO CHANGE THE ORDER OF EXECUTION OF THE START OF THE PROCESS

  Thank you

  Val

• I just looked at problems with importing files from nikon D810 in LR 5.7 it pop a window saying it can't read the files to work on an imac 27 "yosemite on my mac pro running after several times he finally managed to read files and import them into LR

  I just looked at problems with importing files from nikon D810 in LR 5.7 it pop a window saying it can't read the files to work on an imac 27 "yosemite on my mac pro running after several times he finally managed to read files and import them into LR, I never had this problem before there was a sort of update that could from cause?

  What is the destination folder that the date be underneath?  In the top right it says users who suggests, you try to put the photos on top of your username instead of under your username.  Maybe that's the problem.  So change your folder in the drop-down list at the bottom right of what it should be rather than users, and if you're going to show us the destination of your photos at least scroll through the list of folders down right so that we can see which is the white highlight.

  Here is how mine looks like if I want to put my photos imported under my subfolder users - Steve - photos by date:

  

• How can I configure FF to start typing before? Such as if I am on a Web Site that needs my personal info, I put in the first letter of my email and FF puts the rest?

  How can I configure Firefox to start typing before? Such as if I am on a Web Site that needs my personal info, I put in the first letter of my e-mail and Firefox puts in the rest of the letters? IE has implemented this. It makes just so typing more easy to personal information.

  Firefox has a 'rudimentary' fill or "AutoComplete" feature, which is linked to the history of form and research.

  https://support.Mozilla.org/en-us/KB/control-whether-Firefox-automatically-fills-forms

  https://support.Mozilla.org/en-us/KB/Firefox-doesn ' t-economy-web-form-entries

  Users should be cautious to they clear recent history what they deselect Form & Search History; This data is stored in its own cache and not saved in a data file.

  As Fred mentioned, using an 'auto fill' extension is preferred by many users. This type of extension allows user implement their data of a personal nature and then to have this 'auto fill' information as required on the Web page "Forms."

  Currently, the most popular "auto-fill" extension seems to have disappeared of Addons,Mozilla.Org site in the last day or two. I had seen a number of threads of support on a compatibility issue in Firefox 50 with this extension; and I suspect that the developer he shot the AMO site. Not sure if this developer will solve the compatibility problem (probably several processes) prepares a new extension to the new format of WebExtensions, or that it is right to give up with his "auto-fill" extension I saw it listed in the AMO Tuesday; Today, it's gone.

  Personally, I have little use for this type of extension, but I don't use and provide suggestions of development (aka criticize what they were doing, FRO the view of "long term user") for a "auto-fill" extension of return in 2004 in the run-up to the release of Firefox 1.0. These developers have created what I would call an add-on "cutting edge", but ran into problems of compatibility silly every week because of Mozilla. And by the time Firefox 1.5 came out 6 months later and 1.5 changes to this extension, developers just gave and 'we' lost this particular extension. After using the 'ultimate auto-fill' extension I've tried a few others, but they have failed in comparison; and since my need was not great I just stuck with the function 'auto' by default.

  It's a real shame that Mozilla has not seen fit to extend these basic features "AutoComplete" over the past 10 years; but hey, it's software development! Redo the UI repeatedly and ignore the basic features; who looks better on a RESUME "as"scut"work that few potential employers will enjoy.

• How can I configure my computer to boot from the CD Rom drive

  I have Windows 7 home version and I have a problem with booting from the cd rom.  I did a cd bootable for a work at home job, but it will not work properly.  It works fine on the desktop of my sister, but not my laptop.  What is happening is the CD loads when I restart my computer, but then it goes to a black screen and just stays there until I have eject the CD.  I can hear the CD running, but I get nothing after the initial splash screen.  I have reset the bios to make sure that the CD-Rom was placed up in the boot parameters.  Any ideas why this CD will not completely loaded?  Thanks for any help you can give.

  Gayle

  Please note, in order to install Windows 7, you must have a DVD player, if you have a CD-ROM drive, which will not work.

  To learn how to change your BIOS options to boot from the DVD drive, the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

• Can not connect to vcenter after reboot

  Hello VMware,

  I can not connect to vcenter after reboot with the error «Failed to connect to the Vmware research service»

  

  I tried to follow below doc but no help.

  http://www.myvmwareblog.com/2012/11/28/lookupservicesdk-SSL-certificate-verification-failed/

  I tried to play with the Vcenter screen underneath, but no luck.

  
  

  To resolve this problem, replace the VCSA IP with hostname VCSA in the search service configuration file, ls_url.txt file.

  To replace the VCSA IP address with the host VCSA name in the ls_url.txt file:

  1. Connect to the VCSA via ssh under the root user
  2. Go to the directory/etc/vmware-sso using the command:

     CD/etc/vmware-sso

  3. Make a backup copy of the file ls_url.txt using the command:

     CP ls_url.txt ls_url.txt.bak

  4. Open the file ls_url.txt using a text editor
  5. Replace the VCSA IP address with the host name of the VCSA. For example:

     https:// Lookupservice/XXXXXXXXXX/sdk

     Where XXXXXX is the host name of the VCSA.

     Note: It is usually the host name of the domain the VCSA FULL name. Make sure it matches the common name (CN) in the certificate name.

  6. Restart the VCSA services by running the command:

     restart the /etc/init.d/VMware-vpxd
     restart the /etc/init.d/VMware-SSO
     restart the /etc/init.d/VMware-InventoryService

     Or

     Restart the VCSA.

  Alternatively, you can use this workaround to regenerate the certificates for the vCenter Server Appliance.To to regenerate the certificates for the vCenter Server Appliance:

  1. Temporarily change the IP address of the vCenter Server Appliance to a different IP address, not used
  2. Restart the vCenter Server Appliance
  3. Change the IP address of the vCenter Server Appliance to the originating IP address
  4. Restart the vCenter Server Appliance
  5. Connect to vCenter Server Appliance, https://vcenterserveripmanagement Web page: 5480
  6. Click the Administration tab, and then select Yes to certificate enabled regeneration
  7. Click send to save the changes
  8. Restart the vCenter Server Appliance

• E.M.P. Configurator windows crashes after Oracle Instance screen 11.1.2.2

  eHi,

  We intend to install the bases and the IR Services.

  We are able to properly configure all components, but because of the lack of space in the disc last configuration web server is down

  After that space is provided when we open EMP Configurator is crashing after Oracle Instance screen and does not go any further.

  We saw.the error in configtool.log below

  []] [2014 05-27 T 03: 23:40.177 - 07:00] [EPMCFG] [PATH] [EPMCFG-05935] [oracle. EPMCFG] [tid: 12] [ecid: 0000KOxDDHi7Q9gpLCk3ye1JX6UY000000, 0] [SRC_CLASS: com.hyperion.cis.utils.StopWatch] [loading CT documents] task was completed. Seconds of execution time [0] [2014-05 - 27 T 03: 23:40.380 - 07:00] [EPMCFG] [PATH] [EPMCFG-05935] [oracle. EPMCFG] [tid: 12] [ecid: 0000KOxDDHi7Q9gpLCk3ye1JX6UY000000, 0] [SRC_CLASS: com.hyperion.cis.utils.StopWatch] [storage Init] task was completed. Seconds of execution time [0] [2014-05 - 27 T 03: 23:40.427 - 07:00] [EPMINS] [ERROR] [EPMINS-00001] [oracle. EPMINS] [tid: 12] [ecid: 0000KOxDDHi7Q9gpLCk3ye1JX6UY000000, 0] [SRC_CLASS: com.hyperion.hit.wizard.Wizard] trace: unexpected error: [[java.lang.NullPointerException at com.hyperion.cis.config.Configurator.loadClasses(Configurator.java:99) at com.hyperion.cis.config.Configurator.initialize(Configurator.java:91) at com.hyperion.config.wizard.impl.ToConfigurationState$ 1.commit(ToConfigurationState.java:80) to com.hyperion.hit.wizard.Wizard$ (Wizard.java:544) NextClass.run to java.lang.Thread.run(Thread.java:662)]]

  and underneath the error in configTool - stderr.log

  D:\Oracle\Middleware\user_projects\epmsystem1/import_export does not exist or is not a directory java.util.logging.ErrorManager: 1: oracle.core.ojdl.LoggingException: unable to write in the newspaper "D:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\config\configtool-http-ant.log": java.io.IOException: there is not enough space on the drive to oracle.core.ojdl.FileLogWriter._writeBytes(FileLogWriter.java:461) to oracle.core.ojdl.FileLogWriter.writeBytes(FileLogWriter.java:391) to oracle.core.ojdl.BufferedLogWriter.writeToBuffer(BufferedLogWriter.java:335)

  Even if the space available is now EMP Configurator crashes. Help, please.

  D:\Oracle\Middleware\user_projects\epmsystem1/import_export does not exist or is not a directory java.util.logging.ErrorManager: 1: oracle.core.ojdl.LoggingException: unable to write in the newspaper "D:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\config\configtool-http-ant.log": java.io.IOException: there is not enough space on the disk to oracle.core.ojdl.FileLogWriter._writeBytes(FileLogWriter.java:461)

  If this is a new installation, you can try to delete/rename user_projects & reconfigure all the components again (creating new Shared services registry). Just make sure that you have enough disk space before proceeding.

  Kind regards

  Santy.

• Can you help me install After Effects CS6?

  Hi, I downloaded After Effects CS6 (2 files of the Adobe site). I unzipped the files and I select the configuration to launch the installation process.

  "Initializing Installation" window, after some time the closed window and the installation process stop, nothing more.

  I'm under 64-bit Windows 10.

  Can someone help me?

  Thank you.

  Jos

  Troubleshoot installation using newspapers | Elements

• Problem creating test instance, cannot run processSetup for configuration: cannot run createHOMObj for configuration: No. GuestOS appearing in the XML file

  I got following error when running tests on the Workbench 2.1

  
  

  [February 19, 2014 16:27:10: TRANSPORT] [0] FRAME: Async command is monitored by the process of STAF 73

  [February 19, 2014 16:27:10: FACTORYIMP] SETTING [0]: insert in the container

  [February 19, 2014 16:27:10: TESTHASH] [0] INFO: VirtualMachine installation process

  [February 19, 2014 16:27:10: VIRTUALMAC] [0] FRAMEWORK: the Setup() method called

  [February 19, 2014 16:27:10: STAFBASE] SETTING [0]: command execution STAF: staf VTAF_VM localhost connect password of administrator agent 192.168.8.158 userid: 11:Infocore' 1 q ssl

  [February 19, 2014 16:27:10: STAFBASE] [0] FRAME: command execution STAF: staf localhost VTAF_VM getvms anchor 192.168.8.158:administrator

  [February 19, 2014 16:27:11: MULTITECH] [0] FRAME: called VTAF::TestLib:Sphere:Lib:STAFSDK:HostSystem:GetAllVMs (HostName = '192.168.8.150' password = 'infocore"username ="root") returned UNDEF

  [February 19, 2014 16:27:11: VIRTUALMAC] [0] FRAMEWORK: new creation vaaivm1-150 VM from scratch...

  [February 19, 2014 16:27:11: TESTHASH] [0] ERROR: cannot run processSetup for configuration: cannot run createHOMObj for configuration: No. GuestOS appearing in the XML file

  [February 19, 2014 16:27:11: TESTHASH] WARN [0]: found objects that need to be cleaned

  [February 19, 2014 16:27:11: VIRTUALMAC] [0] INFO: cleaning of the virtual machine: vaaivm1-150

  [February 19, 2014 16:27:11: HOSTSYSTEM] [0] FRAME: HostSystem Cleanup() called

  [February 19, 2014 16:27:11: HOSTSYSTEM] [0] FRAMEWORK: the location of the swapfile to the directory of the VM on the host 192.168.8.150 restoration VM...

  [February 19, 2014 16:27:11: HOSTSYSTEM] SETTING [0]: setting VM Swapfile location to use the directory of the virtual machine

  [February 19, 2014 16:27:11: STAFBASE] SETTING [0]: command execution STAF: staf VTAF_Host localhost connect password of administrator agent 192.168.8.158 userid: 11:Infocore' 1 q ssl

  [February 19, 2014 16:27:11: STAFBASE] [0] FRAME: command execution STAF: staf localhost VTAF_Host setswapfilelocation anchor 192.168.8.158:administrator host 192.168.8.150

  [February 19, 2014 16:27:31: MULTITECH] [0] FRAME: called VTAF::TestLib:Sphere:Lib:STAFSDK:HostSystem:SetSwapFileLocation (HostName = '192.168.8.150' password = 'infocore"username ="root") '1' returned

  [February 19, 2014 16:27:31: HOSTSYSTEM] [0] FRAME: destruction of object 192.168.8.150...

  [February 19, 2014 16:27:31: LOGMANAGEM] COMMENTS [0]: recovery log file 192.168.8.150 host vmkernel.log

  [February 19, 2014 16:27:31: FILEUTILIT] [0] FRAME: PutTmpDirectory - called for destination host localhost

  The same problem was sloved.

  Re: Hardware Certification-do can not find the storage50info.txt file to...

• How can I configure the cell data format

  How can I configure data format of cell numbers: for example, I want to capture 123456.78 and need to be 12A3456.78?

  I tried to put #A # #. # format option, but it didn't work a few time and it became A123456.78.

  I also tried on excel and it worked very well, but I like the numbers better. is there a solution to this problem?

  Thank you

  HEY Chi - Lun,

  I don't think that this is possible as many number format. You should be able to insert A in a text string using a formula, but this would happen in a second cell, not that the number has been entered.

  "Assuming all the"numbers require the same inserted letter after the second number, this should do the work."number" entered in column A; the formula in column B. In the table below, your value as an example is A6.

  = Left (A, 2) & "A" & RIGHT (A, LEN (A) - 2)

  

  Kind regards

  Barry

• How can I configure my Airport Express to mesh with new cable modem bridge mode?

  Time Warner sent me a new cable modem and my Airport express still flashing orange light. How can I configure the Airport express in bridge mode?

  You can simply do using AirPort Utility on your iMac or iPhone, as follows:

  • Run the AirPort Utility.
  • Select the AirPort Express Terminal and then, select change.
  • For a Mac:
    • On the network tab, change the router Mode to: Off (bridge Mode)
    • Select to update and allow the base station restart.
  • For an iOS device:
    • Select Advanced > DHCP and NAT
    • Change the router Mode to: Off (bridge Mode)
    • Select done and allow the base station restart.

  

• Satellite A200-1AE: How can I configure the settings of buttons Dual Mode Pad?

  Hello

  I recently bought a Satellite A200-1AE. I tried to configure the default first button on my touch pad (lower left) so that I can fire up MSWord, but it did not work.

  Now every time I have set the mode button and press this button, that nothing not to pass - I lost practically this button.

  My question is how can I configure the mode button on the touch pad settings? Even if I was able to start a program by using the 3 buttons how can I modify these programs?

  Thanks for your help!

  p.s. I read the extended version of the manual for my laptop. There is no explanation of my problem - it says I should look "Synaptics Dual Mode Pad properties.

  I don't know where are these properties.

  Hello

  It s is not so difficult as you think, the properties of the synaptics are in the "mouse properties" of your "Control Panel" of windows. When you reach the 'mouse', then click on the "Advanced" tab and you should find a button 'Advanced functionality settings'.
  It could be that the button is not named as mine, but it must be identical.
  After clicking on it, you should look for this 'easy' Launcher in one of the tabs.

  I think that you will make it, but I'd like some feedback from you.

  Welcome them

• Satellite L20-183: can't configure my sound card

  I can't configure my sound card. Advanced controls for bass and treble tones are disabled. Is there a specific driver sam to record music by his (Conexant audio driver) card? When I record music there is some filtering process, I want to move it.

  Hello

  I put t know if it is necessary to install a specific driver. In my opinion, you need the right software for the recording of the music.

  Can you explain in short how to record music?