process model: include PreUUT and PostUUT step translates report

Similar Questions

• Process modeling: design patterns and best practices

  Hello
  
  Could someone please suggest / share any technical information or documents tha associated with "modeling of process - Design Patterns & Best Practices."
  
  Thanks in advance
  
  Santosh K.
  
  Published by: Santosh539 on July 29, 2010 16:07

  Here is an article I wrote on the process design patterns and best practices for BPM http://www.bptrends.com/publicationfiles/05-06-WP-BPMProcessPatterns-Atwood1.pdf trends

  It is specific for Oracle BPM.

  Dan

• TS2013: Storage of additional Information for DUT and test in process models Stations

  As described in Helpfile 2013 TestStand, store additional data of the UUT is a new feature. It would be very useful, but I can't it in reports.

  I used the following code:

  RunState.Root.Locals.NewSubProperty ("USE. AdditionalData.SW_Version_Inverter", PropValType_String, False," ", 0),
  
  RunState.Root.Locals.UUT.AdditionalData.SW_Version_Inverter = "B123.

  It works very well, the property is added correctly. Now, I use the help file description:

  "To specify that all subproperties automatically appear in a report, set the IncludeInReport property indicator on the property of AdditionalData."

  I have it this way:

  RunState.Root.Locals.SetFlags ("USE. AdditionalData', 0, 0 x 2000)

  But if I do this, the generation of report freezes and I get no report. What I did wrong?

  Hello

  attached a file of sequence of work,

  Best Regards, Fabian

• Process model: additional results

  Hello

  I have again to TestStand (process templates) framework.

  I would like to set up the process for my project template include comments of step and stage requirements for each step of the sequence.

  I've seen solutions where sequence recalls were used to implement this. But this requires the incorporation of reminders in the sequence file which I don't want.

  How can I do this?

  Concerning

  Benjamin

  Hi Benjamin,

  Is there a reason that you can't use the callbacks?

  Reports in TestStand consists of 2 elements: Collection of results and reporting.  Basically, the report is generated on what is collected.  The collection occurs during runtime.  So basically, if your collection contains no comments and requirements then it is impossible that a report can be generated with this information (as this information is no longer in memory).

  However, since it is of the static elements of a stage you can potentially get away with the creation of some kind of reporting mechanism focus on disk in the sequence copy and enter this information using the API TestStand.  The idea would be that you would through your collection of results and looking at the result properties you could identify what stage in what order in which order was called file.  Then open this file in sequence and glean the demands and comments for that step.  Quite honestly, that would be a hairy algorithm.

  If you use the statement-fly, you can use the ProcessModelPostResultListEntry callback in the process model and information on the step and put it on the report.  It would avoid having to add all your file of the client's sequence recalls.

  Hope this helps,

• batch processing model loop

  How to set the model of batch TestUUT loop once? You need to use TestUUT and not only passage require the dialog box of the UUT.

  In process model so step ' Goto next batch "is modified to create a branch to"- end of batch loop -", discussions do not stop.

  Please advice.

  The simplest thing for you to do is in the verification of sequence/reminder pre-batch Parameters.ModelData.BatchLoopIndex if it is > 0 or > 1 (forget if it is 1 or 0 according to), then set Parameters.ContinueTesting = false rather than perform the steps that are normally performed in this order. That is it really. That should do it.

  Hope this helps,

  -Doug

• prevent the 2 instances of process model

  Hello

  We have several testers in operation.  There is a particular test that we run, which has some downtime involved on the object to be measured, and it seems that there is no test running.  Then a person can come and try to run another instance of a sequence, so re - run model of process, trying to initialize the hardware that is already in use and causing a cascade of errors, screwing as the test that was running.

  Is there a property, I can verify from the outset in the process template, I can program into a command prompt to warn the person "there is already another ongoing test here, an abortion?" and "cleanly"?  Or better yet, is there an option somewhere in teststand as "to prevent simultaneous execution of process model" or such?

  Thank you

  David Jenkinson

  Try this one.

• Property to tell whether the process model has been run?

  Hello

  Is there a property to look at a sequence context, where I can tell whether or not the process model has been run?  I need to edit programmatically initialization step vi, depending on whether the process model has been run.

  Thanks for any idea,

  David Jenkinson

  RunState.Root! = RunState.Main

  or

  PropertyExists ("RunState.ProcessModelClient")

• Secondary process model

  The States of TestStand Manual of reference on page A-4:

  "In addition to a primary, or parent, process template file, you can use a secondary process template file, or the child, to encapsulate specific functionality, such as the generation of reports."

  A 'model of secondary process' file is also mentioned on page 10-3:

  "A primary process template file can directly call reminder of model sequences in a secondary process template file. At runtime, if the sequence of the client to the primary sequence file file implements a callback defined in the secondary process template file, TestStand called the sequence reminder in the customer file of sequence, even if the primary process template file does not define the callback. You must add a copy of the sequence of callback for the file of main model for the reminder to appear in the dialog box file of the file of the client's sequence sequence recalls. »

  I can't find any additional information about the secondary process model.

  • Can someone explain how a secondary process model would be used?
  • Are there examples using a secondary process template?

  Thank you!

  1. how to create a / refers to a secondary/child process model?

  It seems that this is done by creating a sequence of recall in a sequence file 'child' AND 'parent sequence file.  Is this correct?

  To create a process model in general you open a movie file and go to Edition > properties file in sequence.  Then on the Advanced tab, change the model Type.  So that it becomes a secondary/child process template, you'd call a sequence on the primary process model.  For example, the SequentialModel.seq at one point makes a call to ProcessOTFStepResult in one of the encores engine in there.  Then, the ProcessOTFStepResult sequence makes a call to PutOneResultInReport (if you use the reportgen_txt.seq).  Then the sequence PutOneResultInReport makes a call to ModifyReportEntry (which is a reminder).  However, if I have a file of the client's sequence I intercept this result and make some changes.  So I would cancel this reminder.  But since ProcessOTFStepResult and PutOneResultInReport are not in the process template must have a mechanism for me to replace it with the customer.  It's because reportgen_txt.seq has a different behavior than reportgen_html.seq or reportgen_xml.seq.  So, it is not sensible to put everything in the process template.  Otherwise, your PM would be ridiculously high.  But you also have to make a copy of the reminder in the MP, so that the customer can see.

  2. the parent sequence file callback simply acts as a pointer toward the kid movie file recall?  Yes and no Cela depends on if it is called in the secondary particles or primary particles.

  3. how many levels of "models of child process" can create?  Is it possible to create a 'third-party process model? I just tested this out, and it seems that you can.  But you don't have to set the reminder in a high school.  Just the third layer and primary particles.

• Get name of running process model

  Hello

  I would like to test during the execution of my sequence

  (1) if there is a process model, who started the sequence

  (2) the name of the process template that was launched

  Anyone know the sentence?

  Cause I tried this in a stage of 'if' and it doesn't seem to work correctly:

  RunState.IsProcessModel & RunState.Execution.GetModelSequenceFile (). AsPropertyObject(). Name == "Single Pass".

  Thank you very much DowNow... It works very well!

• Dynamically set the Station process model

  I noticed in an existing position, to dynamically set the active process template, you use the Engine.StationOptions.StationModelSequenceFilePath property. (Search for "How do I dynamically (at runtime) the models?").

  But where do you put the statement that sets it?

  Thank you

  Oh yes I forgot to say in my last post

  You can make a file of sequence requires a specific process template.  So that no matter what the model of the station is on the sequence of file always use the designated model provide you.

  With the sequence file that requires that the new process model open go to Edition > properties file in sequence.  Under the Advanced tab, under model Options, select require a specific model.  You will then see a box of template file.  Navigate to your new template and select it.  Click OK to exit.

  Now, whenever this sequence file is opened, it will use this process template regardless of what is the model of the station.

  Hope this helps,

• host process no longer works and removes my default printer

  Host process no longer works and removes my default printer.  I need to reinstall my printer software for vista down a few hours later.

  Hello

  -First check with the printer manufacturer for updated drivers and problems as well as their forums (if any).

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  If this did not help.

  I would REBOOT and when the computer stabilizes after a few minutes, and then remove the printer.

  Then REBOOT again and go through this troubleshooting and only after he re - install the
  printer. Be sure to install the latest drivers.

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  ===============================================================

  What is rundll32.exe and why it works?
  http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-rundll32exe-and-why-is-it-running/

  What is the suspicious Rundll32.exe process?
  http://WindowsXP.MVPs.org/Rundll32.htm

  -----------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------

  If no joy trying to determine what is the cause:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see who are loading is method 2 - using MSCONFIG, then post a list
  of these here.

  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have
  Open, which DLLs they have loaded and more. This exceptionally effective utility will show same
  you who owns each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured so that it starts automatically when your system
  boots and you login. Autoruns shows you the full list of registry and file locations where
  applications can configure Auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Startup Type
  (Registry/Startup folder), Command - Line String, the product name, file Version, company name,.
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I reinstall the operating system and I have to delete all programs, including photoshop and lightroom. I put it again and offered to buy them, even if I already pay for them

  I reinstall the operating system and I have to delete all programs, including photoshop and lightroom. I put it again and offered to buy them, even if I already pay for them

  In addition to the steps mentioned above, you can also try:

  First of all, disconnect, then back into creative cloud, using adobe id to pay for your subscription.

  https://helpx.Adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  Then, if you launch any product of CC 2015 and the pop up still shows a trial message window, please check this link for the resolution:

  https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html

• HI, I just bought CC, but I have no model of title and any assistance how to get them, can anyone help?

  HI, I just bought CC, but I have no model of title and no idea how to get them, can anyone help

  im a beginner if answer step by step would be great, thanks.

  need to download and install separately, Library, title, missing model projects templates: Premiere Pro, After Effects, yet

• 23.0.1 Firefox crashes a lot. My internet, including Facebook and Facebook games are extremely slow and my whole hanging system.

  Since I installed Firefox 23.0.1, I had a lot of problems. Firefox is very slow to open and breaks down several times a day, especially if I'm on Facebook. The internet, including Facebook and Facebook games is very slow. When Facebook updates, it's so slow that he hang up my entire system.

  My router and cable modem work fine. I recently installed new cables ethernet between the cable modem, router and computer. BrightHouse is here last week and I have a strong signal of the internet. All of my plug-ins are up-to-date and if it's Windows XP. I cleaned cache from my browser several times. Close and restart Firefox Help for a little while.

  Hi GodivaRides, thanks for the following upward in a new thread: https://support.mozilla.org/en-US/questions/977945

• Several sites, including gmail and all of myspace, recommend that upgrade to the latest version of my browser in order to enjoy a betetr experience.

  Several sites, including gmail and all of myspace, recommend that upgrade to the latest version of my browser in order to enjoy a betetr experience. Seems that these sites will not recognize that I am under firefox 10.0.2, these sites work fine in chrome, but not firefox.

  Message on the gmail website:
  A few important features may not work in this version of your browser, if you have been directed to the basic HTML version.

  Message on myspace:
  Upgrade your browser for a better experience of Myspace.

  Can you try to reset your useragent parameter? Instruction can be found here, see the statement of Helper7677 3rd

  • https://support.Mozilla.org/questions/760152