Processor becomes unreadable as soon as I try to connect to Wifi
My laptop (Toshiba 7) started going very slowly at the time. The other night, the WiFi stopped working. I restarted the router, it still does not work if my phone has picked up the wifi without problem. I tried another new router that sky has sent to me, telephone and another PC he picked up fine, but the Vista laptop just hung. I can connect with an Ethernet cable. I cleaned the registry, I had already installed a better than stock Task Manager.
It starts very well, it's a dual processor and two hearts fall to about 7% of idle. I go to the network manager, he can see the Wifi connection, but as soon as I click it, the processors begin to run between 60% and 100%... I tried a driver update using an Ethernet cable, I tried resetting winsock and ipv4/6, I cleaned and optimized registry, uninstalled anti virus and activated the firewall off, all I can think about. I do not understand why the processor is going wild. Once again, he gave not up looking for the connection and told me the connection could not be established, but usually it just sits there. It runs for 2 hours, the processor is always on at 60% + on two cores, and which, apart from not having an internet connection makes the PC unusable...
I'm using the Manager tasks shows 2 threads in the system, one using 100% of the base, the process is IIRC SMS, and an idle process system using 20 to 100%, which makes no sense me, until I try to connect to wifi, they are both showing around 7-10% which is what I expected when nothing is running.
Can someone please shed some light on this? What can I do? reinstalling Windows is not an option, I have no more disks.
Hello
As you have cleaned the registry, I hope you did it manually and not with a downloaded program that the runtime is supposed to find problems in the registry.
We do not recommend touching the registry unless you make manual changes to it after making a backup of the registry.
Corrupt system files or malicious software are two possibilities for your problems.
If you reinstall, we can also give you advice for this too.
___________________________________________
Scan of Malware in Safe Mode with networking (Ethernet cable, as Wireless Drivers will load mode without failure).
http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
Once in Safe Mode with network, download and run RKill.
RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.
http://www.bleepingcomputer.com/download/rkill/
Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:
http://www.Malwarebytes.org/products/malwarebytes_free
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
And also scan with the free version of SUPERAntiSpyware
http://www.SUPERAntiSpyware.com/download.html
SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.
SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
THS is a very good program to scan your system to remove adware, etc.:
http://www.bleepingcomputer.com/download/adwcleaner/
AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer. Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
And just to be sure, nothing is lurking in the background:
'TDSSKiller Rootkit Removal Utility download for free'
http://USA.Kaspersky.com/downloads/TDSSKiller
_______________________________________
You can clean your hard drive using these two methods.
"Delete files using Disk Cleanup"
http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup
Using the free CCleaner program:
http://www.Piriform.com/CCleaner
In NO case use the registry cleaning Option in CCleaner
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
Update drivers:
Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
"Optimize Windows for better performance.
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
It would be a good idea to run the System File Checker tool if you have corrupted files
"How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"
http://support.Microsoft.com/kb/929833
Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:
- Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
- Type the following command and press ENTER:sfc/scannow
The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
If SFC detects serious flaws, you may need to perform a repair upgrade Installation or relocation complete if you don't have a Vista DVD from Microsoft.
If you can borrow a DVD of Vista from Microsoft you save doing a reinstall full:
"How to perform a repair for Vista Installation"
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html
See you soon.
Tags: Windows
Similar Questions
-
My Icloud account does not work. As soon as I try to connect my PC know "this browser is not supported. What went wrong and what can do? I previously used the same connection to my account for a long time without any problem. My PC I have a tie with Windows 8
< personal information deleted by host >
Hi bengtfrombelgentier,
Welcome to the communities of Apple Support! I'm sorry to hear that you are experiencing these problems access iCloud. If you are unable to access iCloud.com due to an error of supported browser, you can check the browser requirements set out in the following article:
Requirements for iCloud - Apple Support
Concerning
-
When I try to connect to wifi, it shows this connection is not available.
OT: problem with wifi.
I use a fujitsu laptop computer lh532 and my OS is Windows 8 pro. I can't connect to wifi but it displays connection available. When I try to connect to wifi, it shows this connection is not available. I also try to re install the driver wifi. but the problem is still on. What can I do now?
Hi Francois,.
Thanks for the reply.
Thank you to try the following steps to solve the problem of troubleshooting.
I need more information this problem so that I can help you better.
- Have you followed the steps I provided in the previous answer?
I suggest you follow the methods mentioned below and check.
Method 1. If you use a laptop, then I suggest you to check the key wireless keyboard that is on or not.
Method 2 Try to reset the command netsh winsock via the command prompt.
1. press Windows + X key and right click on command prompt (which must be run as administrator).
2. Type "netsh winsock reset" and press enter (without the quotes).
3. now restart the system.Try to follow these methods and response with the State of the question so that we can better help you.
Thank you.
-
Graphical corruption Tecra M1: display becomes unreadable
My M1 comes with an external monitor. Sometimes I have the video display corrupted. The display becomes unreadable and traces of the mouse to create a broad continuous path of 1 cm on the screens. It is barely possible to read anything on the screen in this situation; I can find just enough information to initiate a stop.
When you restart all is well again. I have re-installed and swapped memory autour, and I just upgraded BIOS to the latest version availabel (which can help, but I can't yet of comments). Searched the Internet for similar issues, without success.
Any ideas anyone?
Problem has been very frequently (monthly?) until a recent date, then 3 times in 2 days.Hello
I noticed something similar but only when some files avi or mpg is open with WMP or Realplayer. While the film is running every time when I remove the external screen reader window or bring back to LCD I have this strange behavior. Just restart help.
When the player is not moved, all right. I really put t why this happen, but I can live with it, and I didn t try to reinstall anything because this laptop that I use for work only and don t want to change anything.
I just hope that we write about the same thing. ;)
-
When I try to click in and see my emails it says "sorry, there is a problem with Hotmail right now. It should be fixed soon, so please try again in a few minutes. "and mails never appear (I could see it on the list, but could not click on it to see it), but it has been like that for more than 48 hours, please help!
Hello
Answers is a peer group supported and unfortunately has no real influence on Hotmail.
HotMail has its own Forums, so you can ask your questions there.
Windows Live Solution Center - HotMail - HotMail Forums Solutions
http://windowslivehelp.com/Hotmail - Forums
http://windowslivehelp.com/forums.aspx?ProductID=1Hotmail - Solutions
http://windowslivehelp.com/solutions.aspx?ProductID=1How to contact Windows Live Hotmail Support
http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htmWindows Live Hotmail Top issues and Support information
http://support.Microsoft.com/kb/316659/en-usError message "your account has been locked" when trying to connect
http://windowslivehelp.com/thread.aspx?ThreadId=77be7d82-a0e9-49c7-b46d-040ec654a9e2Compromised account - access unauthorized account - how to recover your account
http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41Hotmail hacked? Take these steps
http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Cannot get Hotmail contacts. Error message States "he has a problem with Hotmail right now. It should be fixed soon, so please try again in a few minutes. "The first sentence is repeated in the great blue and and then more small black font. Then he gives a link "tries to return to Hormail. It has been so since then, I believe, before Christmas. I can get my hotmail emails, my Windows Live ID page comes up, just no contacts. Fortunately, my windows phone keeps my contacts. I also use Outlook Connector, which synchronize my outlook, hotmail, and LinkedIn contacts nicely, but the hotmail contacts have disappeared.
Hi GtoddG,
Thanks for posting your question in the Microsoft answers Forum. For any question on Hotmail, please visit the following link:
-
Original title: the HELP window interferes with Corel 7
When I open Corel Draw 7 (Yes it's old, but he's all I have to do) as soon as I try to do anything on a graph, the window titled ' help' "Why can't I get help from this program? opens and won't allow me to contimue. As soon as I close the window, the first action I take it opens again. Nothing EVER happens on my chart. I can't take ANY action. How can I close that window and keep it closed.
Any ideas?
I just did a clean install of Windows 7 Home Premium from a disk I bought at Staples. I then re-load my old version of Corel. Corel Photo-Paint works well, it is fair to Corel Draw.
Corel Draw 7 is not compatible with win7, even when you use the compatibility options
-
This connection is Untrusted
You asked Firefox to connect safely to we - mg5.mail.yahoo.com, but we cannot confirm that your connection is secure.
Normally, when you try to connect safely, sites will present a reliable identification to prove that you're in the right place. However, the identity of this site cannot be verified.
You use a bookmark to open this link?
If you then try to open the page https://mail.yahoo.com/ instead and, possibly, change the URL of the bookmark to delete the foreground we mg5
It is generally not a good idea to bookmark the pages directly as long as such links to specific areas can become valid.
-
I have 2 computers. An office in the home and a laptop computer in the garage. Desktop is connected to the internet, through infinity, the laptop reaches the internet through a wifi netgear box. Since last week, my laptop disconnects from the internet, everytime I try to log in to facebook. When I plug the laptop in the House, it woorks fine, this happens only when I try to connect via my wifi. Why?
Hello
Thank you for writing to Microsoft Communities. The problem description, I understand that you are not able to connect to the internet. Provide the following information:
· What version of the operating system is installed on the computer?
· Did you do changes on the computer before the show?
· You get the error message?
· What web browser do you use?
· The question is limited to the Facebook website?
Follow these methods.
Method 1: Temporarily disable the security software .
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
Method 2: Follow these steps:
Step 1: Start the computer in safe mode with network and check.
Startup options (including safe mode)
Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.
Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.
Method 3: Follow the steps in the article.
Windows wireless and wired network connection problems
So you can see these articles for more information.
How can I troubleshoot network card?
How to reset the Protocol Internet (TCP/IP)
Let us know if you need more assistance. We will be happy to help you.
Thank you.
-
problems of the DRC of vista for windows machine 7
I have 2 computers running on a homegroup. When you try to connect from my vista desktop to my laptop windows 7 through the DRC, I get the error "unable to connect to the gateway terminal server." Can I remotely from the laptop to the desktop vista end. I the DRC 7 is installed on the desktop and tried to connect using the IP as well as the name of the machine but still no joy.
can someone shed light on this please?
Hello
Temporarily disable the security software on both computers and check if it makes a difference.
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
-
I get an error when you try to connect to my world because of verizon replacement phones
Hello!
Your request should be sent as follows. Go to this address:
and complete the form. Use, in the "Please select a component:"on the ground, AppWorld billing/payment selection. " Any other setting routera simply anonymously you on these public forums. Don't forget to also include the reason why you have exceeded your maximum eligible PIN associations to AppWorld (for example, several RMA, warranty replacement, etc..). If you do not have an "order number" for that field, just use whatever it is (for example, '123456').
If the shape responds by telling you that your PIN is not valid, please report this fact back here also there is a path separate resolution for this problem.
If this does not work, then please come back on these forums (http://supportforums.blackberry.com/rim/) and create an account so that we can provide direct assistance.
See you soon!
-
Original title: icm32.dll error message of World of Warcraft
Error message appears when I try to connect to World of Warcraft. The message indicates that the System32\icm32.dll is not designed to run on windows or contains an error. This pop-up has an "OK" button that you can click, but the message appears again and again. I am running Windows 7 Pro 64-bit and never had this problem before and I don't know how this file was damaged
System Type x 64-based PC
Processor Intel Core i5 - 2500K CPU @ 3.30 GHz, 3301 Mhz, 4 Lossnay, 4 logical processors
BIOS Version/Date American Megatrends Inc. 0805, 10/11/2011What should I do to solve this problem. And any idea on what may have caused the problem.
Thank you
Hello
1. What is the exact full error you get when you try to play the game?
2 have you made changes on the computer before this problem?
Method 1:
I suggest that you try to perform the SFC (System File Checker) scan on your computer and check if the problem persists.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 2:
I suggest you to check the question in the clean boot state.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
NOTE: once you are done with the boot, please follow step 7 of article to reset your computer to normal startup.
Method 3:
I also suggest that you scan your computer with the Microsoft Safety Scanner. The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
http://www.Microsoft.com/security/scanner/en-us/default.aspxNote: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Note: All data that are infected must be cleaned only by deleting all of the data, which means that there is a risk of data loss.If the problem persists, contact the game manufacturer for assistance.
-
I recently installed Windows 7 Ultimate on my laptop - clean, no upgrade. It's in the CARDS and not a copy of the beta version. When I try to connect to a network share, I get an error. "Windows Explorer has stopped working". If I go to start > run and type in \\servername\users, I'm prompted credentials. I enter domainname\administrator, then the password, as soon as I get an error message indicating that "Windows Explorer has stopped working" then by «Windows Explorer restarts...» "and then refreshes the screen. If I open computer > network > Servername, I invite myself again for credentials, but get the same message. The name of username/password combo does not seem to make a difference.
An additional singularity, I went to control panel > "Backup of your computer", and when I was invited to a network location back up my system, I gave him the same set of location and network credential and the system have been successfully saved to the network drive.
Press Win Logo key + R, type: fsmgmt.msc
If so, open the credentials manager in Control Panel and look for an entry like your network logon. Delete who can clear up.
Messages rating helps other usersMark L. Ferguson MS - MVP
-
When I try to connect to the games, it just goes back to my home page. I can't play all games, the screen just goes back to any page, I was previously on.
Hello Gary,.
Thanks for posting your query on the Microsoft Community.
The information provided by you are not enough to provide us with troubleshooting. It would be much appreciated if you could provide us with the following information.
- Are you facing problem with this game alone or with all games?
- Are all the device drivers and updates of Windows updated?
- You did it all change important before the show?
- Have any security software installed on your system?
According to the title of your question, you can not open the collection of Microsoft solitaire on your computer. The question could be if some security software is limiting to open. It could also be if there is a corruption in the application. If you get a black screen during game play then it could also be due to drivers. So try to follow the steps below and see if it helps you to solve the problem.
Method 1.
You can temporarily disable the security software and check if it allows to open the game on your computer.
Warning: If you need to temporarily disable the antivirus to install other software. You must enable the antivirus as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to virus attacks.
If the problem persists, go to the next method and see if it helps.
Method 2:
Step 1:Please go to the link below, download the file and run it.
Run applications troubleshooting
Download and run the troubleshooter modern UI App.
http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab
Step 2:
I suggest to go through the link and follow the given procedure. Here is the link for your reference.
What to do if you have problems with a soft
http://Windows.Microsoft.com/en-GB/Windows-8/what-troubleshoot-problems-app
After the execution of the method 1 try to open applications to be updated.
Method 3
If the problem persists, try to update the drivers supplied by the steps mentioned in the article below. Drivers are updated occasionally. Windows can update automatically, or you can install the drivers updated yourself. It is important for you to have confidence in the updated drivers that you install.
Download and install the drivers
Get back to us with all the necessary information and the result of the proposed suggestion. We will be happy to help you.
Kind regards
-
Why do I get access denied error when I try to connect to the printer?
* Original title: Please help me
Why do I get access denied error when I try to connect to the printer?
Hello
Try right-clicking on the printer software when installing it and select run as administrator.
See you soon.
Maybe you are looking for
-
My phone won't let me download apps or update
IM having problems with my apps not download or update
-
bios question [l430]
So I just got my L430 running W8. Maybe I'll have simply not my computer off completely, but every time I try to turn it off in W8 (ctrl + alt + dlt then off) he botts in w8 in like 3 seconds. I do not have a SSD, so this seems really fast. In any ca
-
I put the camera chip in the hard drive and nothing happens?
I put two camera differand chips in the hard drive to load pictures and nothing happens
-
Two copies of windows vista to startup.
I have two copies of windows vista to startup. How can I remove one of the copies?
-
Pavilion p7-1459: install 2 AMD Radeon HD 7450 graphics cards in my pc
I have a second chart AMD Radeon HD 7450 card and wonder if it can be installed in my p7-1459 to improve game performance. If possible, can you direct me also to the installation procedures.