ProDesk 400 MT of G1: Problems after the replaced the motherboard

Similar Questions

• I'm having problems after the restart with docking station, applications, etc.

  OS X: 10.11.3

  Mac Pro 2010 2 x 2, 66 GHz 6-Core

  Graphics NVIDIA Quadro 4000 card

  24 GB Ram

  50 GB of free memory

  4 additional hard disks

  Hello community,

  I have a strange problem, after the mac is restarted, even when I decide not to join his joined apps a former State of the saved request. I can't make changes to the dock, after restart it restores an old state. When I try to import or save something in any application you see normally last modified files, yet his watch an old state. When I try to delete files that I always put my password, it's new. Im confused, I'm a long-time os x user since 1999 has never had this kind of problems.

  Help, please.

  Lars

  Please, back up all data before proceeding.

  This procedure will unlock all your user (not system files) files and reset their ownership, permissions and default access controls. If you have voluntarily set special values for these attributes on any of your files, they will be be restored. In this case, either stop there, or be ready to recreate the settings if necessary. Do that after checking these settings that did not cause the problem. If none of that is meaningful to you, you need not worry about this, but do not follow the instructions below.

  Step 1

  If you have more than one user, and the one in question is not an administrator, then go to step 2.

  Triple-click anywhere in the next line to this page to select this option:

  sudo find ~ $TMPDIR.. -exec chflags -h nosappnd,noschg,nosunlnk,nouappnd,nouchg {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the Terminal window by pressing Command + V. I tried these instructions only with the Safari browser. If you use another browser, you may need to press the return key after pasting.

  You will be asked your password of connection that are not displayed when you type. Type carefully, and then press return. You can get a warning to be careful. If you do not have a password, you will need to configure one before you can run the command. If you see a message that your user name "is not in the sudoers file", then you have not logged as an administrator.

  The command may take several minutes to run, depending on the number of files you have. Wait for a new line ending with a dollar sign ($) to appear, and then quit Terminal.

  Step 2 (optional)

  Take this step only if you have trouble with the phase 1, if you prefer not to consider, or if this does not resolve the problem.

  Start in recovery mode. You may be prompted to select a language, then the OS X Utilities appears.

  If you use FileVault 2, select disk utility, then select the icon for the volume FileVault startup ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Click the Open button in the toolbar and enter your login password when you are prompted. Then quit disk utility must be returned to the main screen.

  Select

  Utilities ▹ Terminal

  in the menu bar. It will open a Terminal window. In this window, type this:

  resetp

  Press the tab key. The partial order you entered will automatically end this:

  resetpassword

  Press return. Opens a window to reset the password. You do not need to reset a password.

  Select your boot volume ("Macintosh HD", unless you have given it a different name) if not already selected.

  Select your username in the menu option allows you to select the account if not already selected.

  Under Reset Home Directory Permissions and ACLs, click the reset button.

  Select

  ▹ Restart 

  in the menu bar.

• big problems after the installation of Yosemite (10.10.2) with Photoshop CS6... The program crashes - last time 10 times during my working session... wacomtable does not work... It's slow... and receive errors on the graphics card... It s a terror to work

  big problems after the installation of Yosemite (10.10.2) with Photoshop CS6... The program crashes - last time 10 times during my working session... wacomtable does not work... It's slow... and receive errors on the graphics card... It s a terror to work with my beloved Photoshop!

  Yosemite upgrade very often damage existing Photoshop.  I thank Apple for that.

  You must uninstall and reinstall Photoshop, then apply all the updates of Photoshop from scratch.

  But first, give us details about your configuration:

  STANDARD TEXT:

  Note that it is standard text.

  If you give complete and detailed information on your configuration and the issue,

  as your platform (Mac or Win),.

  accurate versions of your operating system, Photoshop (not just "CS6", but something like CS6v.13.0.6) and the bridge.

  your settings in Photoshop > Preferences > performance

  the type of file you were working.

  specifications of the machine, such as total installed RAM, scratch file HDs, total available disk space, video card specifications, including total VRAM installed.

  What troubleshooting steps you have taken so far

  what you receive, error messages

  If problems of opening raw files also the exact camera brand and model that generated

  If you experience problems printing, specify the exact brand and model of your printer, the size of the paper, the dimensions of the image in pixels (so many pixels wide by pixels high). If going through a TEAR, specify that too.

  A capture of your settings, or the screen image could be very useful also,

  etc.,.

  someone may be able to help you (not necessarily this poster, which is not a Windows user).

  Read this FAQ to get advice on how to ask your questions correctly to get faster and better answers:

  http://forums.Adobe.com/thread/419981?TSTART=0

  Thank you!

• Remove a problem after the app is available in the AppStore

  Hello, everyone,

  I want to know if it is possible to remove a problem after the approval of Apple. I have a multi-folio application and I don't want to remove the entire application, only one edition of it.

  Can someone help me?

  TKS a lot.

  Renata

  TKS a lot, Johannes!

• Cannot access the files from the internal hard drive that has been converted to drive external hard after the motherboard is dead

  I can't access the files from an internal hard drive that has been converted to drive external hard after the motherboard is dead. I think that my files are still there, as shown in the volume of the player volume ~ 500 gb which is almost completely full. But I can't access most files, including documents and settings. When I took 'ownership' of the folder, I could open the TI but then it showed everything that was in my documents and settings on the computer file I used to open it, not the documents of the car.

  I can't access the files from an internal hard drive that has been converted to drive external hard after the motherboard is dead. I think that my files are still there, as shown in the volume of the player volume ~ 500 gb which is almost completely full. But I can't access most files, including documents and settings. When I took 'ownership' of the folder, I could open the TI but then it showed everything that was in my documents and settings on the computer file I used to open it, not the documents of the car.

  Uhm... I think the issue here is a misunderstanding of what you watch.

  If you want to access your files from the old hard drive - you need to look in the right place.  If the old system was "Windows 7", "Documents and Settings" is the * wrong * place to look and "Users" would be the place to go.

  You * will * take ownership and change permissions on ALL (you want to propagate to all subfolders/files when do - to save time) in order to get them properly.

  New-->: Windows Vista/7 would have your files located in the directory 'Users' of the root of the drive - and then under your username.

  • \USERS\\Desktop\
  • \USERS\\Downloads\
  • \USERS\\Favorites\
  • \USERS\\Documents\
  • \USERS\\Music\
  • \USERS\\Pictures\
  • \USERS\\Videos\

  ... etc...

  Documents and settings to WIndows Vista/Windows 7 is a symbolic link and would lead to what you see if you tried to use it.

• Major Outlook and timing of the problems after the upgrade of the El Capitan

  On the advice of the Apple support (phone call) I recently upgraded from Yosemite to El Capitan 10.11.6.

  I have many problems. The two largest are (1) stands (2016) Outlook and frequently "must be closed; (2) calendars quickly goes to "not responding" after the launch and shows multiple entries for a single event. Example: I have a class to repeat each week (when I was in Yosemite). Before the upgrade, he showed the event once a week. After the upgrade, it it shows 13452 times the same day. I followed the advice on these topics, but nothing has worked. Similarly the calendars on my iPhone5 freezes as well.

  Hello Steve,.

  Thank you for using communities Support from Apple. I have a problem with your MacBook Air use after update is not what you expect. Based on what you said, it seems you can experience some software related issues, and here's how I recommend refine you and resolve these issues:

  1. first of all, try to run a quick with the disk utility tool test, as this can correct simple problems that you encounter. Then restart normally and retest your problems.

  Disk utility (El Capitan): a disc repair

  2. use Mode without fail to start up your Mac so that it performs certain checks, remove files from the system cache, check your startup disk and trying to fix problems if necessary directory. Test mode safe questions, then restart normally and test again.

  Try safe mode if your Mac does not end commissioning
  Graphics performance limited in recovery of OS X or in safe mode

  3. you can find out if unexpected behavior is related to the user file or a parameter in trying to reproduce the problem to a different user account. This process includes creating a new user account, connect to it and test for the issue.

  How to test a question in another account on your Mac.

  See you soon!

• HP EliteBook 850 G3: HP EliteBook 850 G3: its problems after the update of Windows 10 anniversary

  Hi people!

  After the update of Windows 10 birthday I have problems with my sound card. There are two sound cards listed by Device Manager. The first is "Conexant Audio of ISST" and the second "Intel High Definition Audio". I know not weather it was the case before the update. I just recognized it after the update when I had sound problems.

  In any case, on a sound start works on the other boot it does not work. It seems that Windows chooses the sound card, every time when it starts. Sometimes it takes the bad sound card.

  I tried to uninstall maps its and their resettlement. On the HP site, there is a driver for the Conexant map bot no driver for Intel High Definition Audio card. 10 Windows itself is not find a driver for this sound card. I also tried to reinstall the other drivers, chipset drivers for example. But unfortunately it did not help. I also tried to disable the Intel High Definition Audio, but also without success.

  What else can I try? I don't want to reinstall Windows. There must be a solution without this. Any ideas? Here's a screenshot of my device manager, perhaps it helps:

  

  If you need more information, please let me know.

  Best regards

  Ty

  I just tried this driver and I still have sound after 6 resets.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_171406_1

• Satellite Pro L850 - 1-8 - a few problems after the last update to BIOS version

  Hello.

  I have some problems after that the latest bios upgrade to version 6.80. First of all, I would like to note that Setup of HW does not work for me. I tried to use this tool to change the settings of the bios without success. This was done also by running this application with administrative privileges without success.

  The initial problem appeared after I tried to disable "open Panel - Power on" setting.
  This has been activated before the update bios and at some point I wanted to disable, because he gave me a nightmare when you carry because she would then put the computer in a bag.

  No matter how many times I tried to turn it off, it seems always enabled in HWsetup.
  Another feature that I can't edit's startup speed.
  It remains fast even if I tried to change to normal.

  I'm on Windows x 64 8.
  The case is now.

  GROUP OF EXPERTS
  HWsetup reports Open PANEL - PANEL as activated, while the Bios shows it off. It is indeed turned on and I could not turn it off. I even tried him for in the Bios and then try to disable in HWsetup, no change.
  STARTUP SPEED
  HWsetup startup speed related to 'NORMAL' but actually is 'FAST '. In the Bios, it reports its normal, but its easy to say to his FASTING in.

  My questions are.
  1. it can be the cause?
  2. How can I reset all of the values in the Bios to see if that fixes anything to start?
  3. is it possible to Flash the Bios with a version more old to see if this corrects the problems I have?

  I should also mention that 'System settings' has never worked for me. I get a message "Supervisor password check failed". Please note, there is no installed password.

  I will be grateful for any given solution. Thanks in advance.

  Can you please tell us which model of laptop you have exactly (the complete model name)?

• problems after the automatic updates

  I have Pavilion g7-2235dx with Windows 8.1 operating system. Almost all automatic up-to-date mess to the top of my ability to get on the internet. The only way I can connect is to uninstall all updates. The icons on my desktop has also stopped working. When I click it, it will immediately on the desktop. Cannot pin them to the taskbar either. Those on the taskbar does not open by clicking on them either. Have to click straight and say to open. Also problem get my Norton antivirus to open. Says it works but can not open it.

  Hello
  
  It might be, the upgrade to Windows 8.1. I've seen people with complications get the upgrade to go "smoothly".
  
  You can try, do a system update that would take you back to Windows 8. See if you have the same problems after updates.
  
  If you choose to update again, make sure that everything is already successfully updated.

• Some problems after the downgrade from Vista to XP - Tecra S10

  Hello

  I wonder if you could give me a helping hand with a laptop I bought recently.

  With the S10, I got a downgrade and used to downgrade to XP SP3 cd, but who has a problem.
  Sometimes when I restarted the pc, or even when it would boot it would hang and the fan would start to run at 100%.
  When it restarts, it crashes just after the "closing windows" and when it starts, it freezes at the windows xp loading screen.

  The only thing I could do, it's hard to restart it.
  If you think "huh, he had a few pilot program or that ' Yes, thought that myself, but I reinstalled xp on the machine with fresh drivers, bios update, file verification, toshiba software uninstalled, reinstalled, checked for viruses malware... always dose the same thing.

  The interesting part is that it is not all the time... and I can't understand what is happening when the system crashes.

  Can someone give me a hand with this?

  Hello

  It is possible that some pre-installed applications that worked correctly with Vista OS would go well with Win XP and so these strange questions would appear

  As another user suggested try to uninstall the software of fingerprint. But the best solution would be the clean OS install

  However check this

• Solution for Webcam sleep & back problems after the upgrade to Windows 7

  Just thought I'd share the solution I recently found a problem I've had since a Satellite Pro A200 GE 26 Q of the upgrade from Vista to Windows 7.

  I installed the software webcam for windows 7 on the toshiba site and built-in Chicony camera would work very well after a reboot, but if the computer is in sleep for a long enough period, the unit would stay asleep when the computer woke up and wouldn't work at all, unless the computer has fully restarted.

  The solution lies in a change in the registry to force the computer to update the webcam USB controller is attached, after the release of sleep. It was apparently the default for Vista when it was released, but was changed in Vista SP1 and Windows 7. Designed for Vista original material which did not have its drivers/registry updated entries could therefore be subject to a failure because of changes to the default settings through the updates of windows. Toshiba, it seems, do not think that this issue then of the extinction of the registry fix for Win7 upgrades for the satellite Pro A200. Therefore fix manually.

  The article where the solution is here: [http://support.microsoft.com/kb/928631]

  You do NOT have the file of the fix, you must only make the change to the registry described later.

  You need turn on the camera while you do the following to make sure that it appears in Device Manager correctly.

  Step 1: Determine the specific USB host controller

  
  # Click on * early *, enter devmgmt.msc #the * search * box, then click on * devmgmt.msc* in the * list of programs.
  # The * view * menu, click on * devices of * connection *.
  # Expand the processor node. For example, expand * ACPI * Multiprocessor PC *. (In my case, * ACPI x 86 based PC) *.
  # Extend * system compatible ACPI Microsoft *.
  # Extend * PCI Bus *. Several USB host controllers will be listed.
  # Expand each USB host controller node, and then expand successive subnodes until you find the name of the device that is failing. For example, the device entry might look like the following: ACPI Multiprocessor PC\Microsoft ACPI-Compliant System\PCI Bus\Intel (R) \ICH8 family USB Universal Host Controller - drive root Hub\fingerprint 2830\USB * (Note: for me, I found the webcam to ACPI x 86 PC\Microsoft ACPI-Compliant System\PCI Bus\Intel (R) \ICH8 family USB2 Enhanced Host Controller - 283A\USB Root Hub + USB Composite Device\Chicony USB 2.0 Camera-based) *.
  # When you have located the device, right click on the associated and then USB host controller click on * properties *. In the example that is listed in step 6 you would right-click * Intel(r) ICH8 Family USB Universal Host Controller-* 2830, then click on * properties *. (* Again, for me it was different - ICH8 Family USB2 Enhanced Host Controller - 283 a *).
  # Click on the * details * tab.
  # Select * pilot key * in the list. The driver key will look like the following. Note the last four digits of this driver key. {36fc9e60-c465-11cf-8056-444553540000} \0002 * (on my system it's: (36fc9e60-c465-11cf-8056-444553540000) \0005*).
  
  
  

  Step 2: Add the ForceHCResetOnResume registry value for the USB host controller

  
  # Click on * early *, type regedit #in the * search * box, then click on * regedit.exe* in the * list of programs.
  # Find and then click the registry subkeys that are similar to the following: * HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contr ol\Class{36FC9E60-C465-11CF-8056-444553540000}\Four-digit_number.* in this step, the numero_a_quatre_chiffres is a placeholder for the USB devices in the system.
  # You must search the registry subkey by using the value that you noted in step 9 above. For example, if the key of the pilot to step 9 is * {36fc9e60-c465-11cf-8056-444553540000} \0002*, then you need to get * HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contr ol\Class {36FC9E60-C465-11CF-8056-444553540000} \0002. (For me, as mentioned above, this was \0005 (36fc9e60-c465-11cf-8056-444553540000)). *
  # On the * Edit * menu, point on * New * and then click on * DWORD value *.
  # Type# * ForceHCResetOnResume * to the name of the DWORD and then press ENTER.
  # Right click * ForceHCResetOnResume * and then click on * edit *.
  # In the * boite box the value data, type# 1 and then click on * OK *.
  # Exit the registry editor.
  # Restart the computer.

  This fixed the problem for a long time for me. I'm writing this in case it helps someone else who has the same problem. If anyone from Toshiba never reads this, you might consider adding the registry fixes for upgrades of windows 7 on the download page for this & all other models affected.

  Big Hey what s announced and detailed, thank you! :)
  I m wondering how you discovered it.

  But I want to add something: before you make or change something in the Windows registry, make a backup of it. In the worst cases, restore you the old Windows registry. Just to be sure ;)

• Satellite A200-23U - DVD - ROM problem after the firmware update

  Hello! I have A200-23U (TSSPcorp CDDVDW TS-L632H). I day first TO02, then TO03 firmare. No error has been shown. After the reboot, my device is locked (is not open / eject button or by any software) and ImgBurn (for example) can't find writers. In system devices now it is shown that:
  IDE\CDROMTSSTCORP_CDDVDW_TS-L632H___*boot*___\5&1AC5D6C0&0&0.0.0 (I think that there must be * TO03 * not * START *)

  What is the problem and how can I solve this problem?

  PS. sorry for my bad English)

  You can try to reflash the drive down to T02 OR you send the machine to an authorized service provider or they fix this problem.

  Could first check if the downgrade works?

  Welcome them

• Satellite U400 - PSU40E Synaptics touchpad problem after the recent update to BIOS

  Toshiba welcome,

  I've tested this in reverse, this is why the statement in the subject as it looks. After upgrading the bios of 3.00 to 3.50 touchpad loses its precision. Very rude and useless its like that.

  I tried different drivers, everything, but the only way to really solve this problem was it downgrade to 3.00 OR uninstall the driver Synaptics completely. Second solution, unfortunately, is unacceptable, because then I lose some features, like click on contact, which I don't use and control.

  Best regards

  Wojtek

  Hey Buddy

  I U400 and the BIOS has been updated to the newest one.
  The touchpad works like a dream. I m using Win XP and Vista and there is NO problems after BIOS update!

  In your case, this may be only a software problem and I think you can use the Toshiba Recovery disk and could reinstall the whole OS from the Toshiba drive

  It is a really radical solution because the whole HARD disk may be formatted, but if the resettlement of these two drivers touchpad didn t help then I think this would be the last solution.

• Qosmio G30 - problem after the system recovery procedure

  I Qosmio G30 - 148 who have Windows XP MCE, trying to download some system programs crashed and make automatic restart.

  I then used a RECOVERY CD to recover my system all and followed the instructions on the CD but when finished and restart the system, a famous blue screen telling me there is a problem in my system and windows must be restarted.

  When restarting in safe mode, it is a message telling me that the system is not fully installed. Please, rerun the Setup program.

  You could any body help me in this problem because it's a strange problem?

  Note: I tried to install Windows XP from external CD but the system did not have the hard drive.

  You are right. It's a really strange problem. I don't know if you use some external devices but before you start recovery procedure please remove all connected devices.
  The fact is that this recovery image is designed for this model of laptop and the specific hardware configuration. If the BSOD occurs after the installation of the image it takes little hardware related issue.

  I don't really have any other explanation. Problem is that no one here will be able to offer an accurate diagnosis, and we can only speculate what may be the problem.

  Try to do it again to the recovery facility, but if the problem persists I fear that you need professional help.

• Major problems after the update to 10.11.2

  Hello

  I have a 2009 MacBook pro environment. I'vewalkways updated to the latest osx and have never had any problems. Since the update to El Capitan my computer worked really slow. I deleted all the old files, uninstalled I don't use and move all the files on a hard drive current of the program. With the first update to El Capitan, it would take 10 minutes to activate and load up, slow but manageable.

  Since the 10.11.2, update I have been practically impossible to use my computer at all. Now, it takes 25 minutes to activate and load up. Once its loading I can barely click an icon before her color of the wheels. It will charge finally something at the end of 5 minutes, but basically the computer is useless.

  IM wondering if anyone else has had similar with El Capitan and the problems that people would be advice to me. I plan to downgrade to Yosemite, as I had no problem then, but I've never done anything like this before, and I'm worried it will more mess my computer and then I will have no computer at all? I need to create a USB key with Yosemite on and then erase the Mac HD before reinstalling with Yosemite. I am naturally cautious but want to do what's best for my computer working again.

  Or would it be best to reinstall El Capitan and hope this sorts the problem?

  Thanks in advance

  Try these in order to test your system after each see if it is back to normal:

  1. a. reset the PRAM and NVRAM on your Mac.

  b. Macs with Intel processors: reset of the controller (SMC) system management

  2. restart the computer in Safe Mode, and then restart again, normally. If this does not help, then:

  HD recovery start: restart the computer and after the buzzer, press on and press and hold the

  COMMAND and R keys until it appears the Utilities menu screen.

  3 fix the hard disk and permissions: select startup drive in the Utilities menu utility. Fix the hard drive and the permissions as follows.

      When the recovery menu appears, select disk utility and press the continue button. After loading disk utility select it

      back from Macintosh HD entry of the list on the left.  Click first aid button in the toolbar. Wait for the operation

      ends, then quit disk utility and back to the main menu.

  4 reinstall OS X: restart from HD recovery Select reinstall OS X from the Utilities menu, then click on the continue button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than wireless.