Prodesk G2 400 LTS: HP Prodesk 400 G2.5 SFF
Our company has recently taken delivery of 400 Prodesk new pc and I'm fighting to change the identification sticker - it is greyed out in the BIOS and can not find where this.
Someone at - it ideas please?
see you soon
On my 8200 Elite CMT, you can change some information like that... to see if it works for your model.
After entering the Setup by pressing the F10 key, press on Ctrl + A to open additional fields in the security > system menu IDs.
You can change/enter the serial number of your PC in the inventory and serial number of the chassis number in application areas.
Save the changes then and once when you exit the BIOS.
Tags: HP Desktops
I have the following problem. I hope to be clear in my English because it is somewhat complicated to explain.
I did following:
ID of drugs classified in quantity
and drugs following table:
Drug brand Id brand Description drug whose active ingredient Id drug whose active principle Description
Aulin Nimesulide 1 1
2 Asprina 2 Acetilsalicilico
In AWM, I've defined a Dimension of drugs based on the following hierarchy: drug whose active ingredient (parent) - brand name of medication (sheet) mapped as Description:
The active ingredient of drug = drug Active ingredient Id of my Table of drugs (pharmaceutical = Description of the active ingredient LONG DESCRIPTION attribute)
Pharmaceutical brand Description = drug brand Id of my drugs Table (LONG DESCRIPTION = Description of drug brand attribute)
Indeed, in my cube, I have traced pharmaceutical leaf-level brand Description = Id of the drug of my fact table. In AWM drugs Dimension is mapped as Sum aggregation operator
If I select on answers drug whose active ingredient (parent of my hierarchy) and the quantity, in my view, after the result
Description of the active ingredient drugs classified in quantity
indeed of the correct values
Description of the active ingredient drugs classified in quantity
EXACTLY the double! But if I dig drug Description of the active ingredient Acetilsalicilico I can't see correctly:
Drug whose active ingredient Description pharmaceutical brand classified in quantity Description
Aggregation of evil is only at the top level of the hierarchy. The aggregation on the lower level of the hierarchy is correct. Perhaps the answers also amount Total line? Why?
I'm frustrated. I ask your help, please!
OK your on 10G but the view of the cube and the obligation to limit the levels in the LTS in the RPD is valid in both.
I think we found the problem,
Go to each source logical table this logic table (x 2 in your case you have two levels) and on the content tab, window background ' use this "Clause Where" filter to limit the rows returned. »
Open the expression builder, locate LEVEL_NAME according to your cube and limit accordingly, it is to say LEVEL_NAME = "BRAND_DESCRTIPION" for the aggregation BRAND_DESCRIPTION LTS and LEVEL_NAME = "XXXX" in detail, SFF, where XXXX is the name of level of hierarchy in your cube for details (leaves) records.
Can you try that and let us know?
here have a Prodesk G3 400 HP and want to install Win7 x 64 ISO from Microsoft.
ISO of Windows Installation is from the MSDN site. Used the optical drive first-> no Mousesupport USB
Have created a key USB Flash Drive with Rufus-> burn ISO on USB (Rufus supports UEFI-Images)-> also no USB Support
Have you contacted Support HP-> get Installtion Windows Recovery Media-> have a usb support but a windows installation 7 modiefied with crap HP bloatware.
I want to install a NEW Windows INSTALLATION on this workstation only. Is this too much to ask?
found this entry in this post
Removal of the USB 2.0 chipset Intel support since the chipset Skylake, so normal DVD and USB Windows 7 install does not work on the 6th generation of Intel chipsets. You must add USB 3.0 drivers in Windows 7 ISO using this utility Intel;
After running this utility and direct to your Windows 7 ISO, you should be able to install Windows.
Unfortunately a USB connected also does not work...
An illustration of the PC, I see that there are PS/2 keyboard and mouse ports.
You should be able to install W7 if you replace the usb keyboard and mouse PS/2 ones.
This USB creator utility must also have worked, so I don't know what to say on this subject.
But the post below my answer which has been marked as being the solution indicates that a PS/2 KB and mouse will also work.
ProDesk 400 G 1 MT
Windows 8 was the orignal operating system
Recently updated for Windows 10
Question: Replaced mobo moose that crashed.
Original HP mobo crashed. Replaced by superior version 2.0 than the 1.2 that it came with, but same manufacturer.
Getting two errors:
1. at boot up -: incorrect serial number of chassis
2. Windows 10 boots and works very well - did not need to reinstall the o/s - but does not activate Windows 10
Solutions? Is there a way to solve this problem without reinstallation? Something in the BIOS/EUFI requiring an update?
I hope this helps.
Product key Windows 10 is connected to the motherboard, you must contact Microsoft Activation Support @ (888) 571-2048
If you found my answer helpful please say thank you by clicking on the icon of the thumb.
If my answer has solved your problem, please mark it as accepted Solution. Thank you!
Hi, sorry for my bad English
I have a HP prodesk 400 G1 MT and I have already installed a 750 W POWER supply
I would like to install a graphics card, AMD R9 380 Nitro, can I use this card?
Thank you one please help me
There is very little information on the compatibility of the R9 AMD 380 and HP 400 G1 ProDesk.
You have a fairly new PC so there is a good chance that the AMD R9 380 will work.
Find out what the return policy is before you buy.
Anyone happen to know the size of fan to HP G1 ProDesk 400 MT PC? It is 120 mm?
Here is a practical guide for you:
I have an interesting problem that I hope you guys could help me with.
I have a Prodesk 400 G1 SFF and trying to update the graphics card integrated with a GeForce 210.
The thing is when I put the card into the slot, and then start the on-board computer and the new
come into conflict.
It seems to begin completely on the windows login screen, but the only thing you can see is the slider (when you move
the mouse) on a black background. When I remove the new card, the computer starts and the screen works fine
I tried to install the GeForce 210 drivers without the card in the slot, but then I get an error message saying that the
material is not found and can not continue the installation.
I tried to insert the new card with windows started (I know, not a good idea) to see if the installation process
detects the card then, but I got the same message "hardware not found".
It seems that I'm pretty locked. I can't put the card into the slot, because then the screen does not work and I can't
install the drivers without the card because it must be inserted in order to ensure that it can be installed.
You guys have any suggestions on how to solve this problem or someone of you had similar experiences?
Appreciate the help,
You are the very welcome, Fredrik.
Yes, without the new card installed... First go in the bios, turn on legacy mode and disable secure boot.
HP video card will not work on any HP PC that comes with the W8 or newer of the factory, unless these BIOS settings are changed.
Normally the PC won't start not even with those setting enabled and a HP not installed video card.
Then, after changing these settings (without the new installed card), reboot the PC and go into windows, go to Device Manager, click to expand the category of device display maps, right-click on the Intel HD graphics card, select uninstall and check the box uninstall driver.
Do not restart requested. Shut down the PC and install the video card.
Turn on the PC, hope it works, and then install the drivers.
If you encounter problems (which I doubt you want) you can always remove the graphics card, clear the CMOS which resets all parameters of the BIOS to default values.
Then reinstall the Intel graphics drivers.
Can someone help me please how to install windows xp on Prodesk 400 MT from G1, I get a blue screen, please help
Unfortunately, nobody can help you.
Cannot run Windows XP on this PC due to the lack of graphics, and AHCI drivers.
You can change the speed setting IDE controller (if your PC has such a framework of BIOS) and install XP in this way, but even if your PC has Intel integrated graphics card, there is no driver for it.
There is probably some other drivers that don't exist either.
I am trying to install windows Xp on my pc hp 400 prodesk g1 mt, i7, x 4, 500 GB.
When I boot with the cd, try to install windows xp, stop start windows...
I change in the bios to IDE graph but still no working windows xp.
but when I install OS W7 AND W8 is Accept.please help me
Please use the Forum from HP Support. I brought your question to the team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display (numbers series and information).
If you are not familiar with messaging private forum please click here to learn more.
How can I make the Mini ProDesk of G2 400 HP auto-start after power loss. I don't find this settings in the BIOS.
Have you looked here?
My NEW HP ProDesk 400 G1MT (product # K1L42UT #ABA) will not register online with HP. On a suggestion to help, I tried to enter the name of the product without the TM and, after unsuccessfully, attempted to enter the number of the product without #ABA, always without success. Whenever the data have been entered, a message "no product" popped up.
HP technical support cannot provide a reason for my inability to register the product, but uses the same information and found my product in its system. Suppport: HP's is not allowed to register for my PC.
So I have a problem, it will be very difficult to get online assistance!
Martin, welcome to the forum.
I asked a representative from HP to help you with your problem. You should hear from someone soon.
I'm looking to improve my 4600 ProDesk of Intel to a Nvidia GTX 970 graphics. I understand that this will also necessitate upgrading the PSU aswell, I was thinking of a 650-700 watts model.
Here is a link to all the specifications of the desktop computer (make sure you use the MT or Midtower model because it shows a model SFF aswell).
Basic PC specs
- Intel i5 4690 S
- 2 x 4 G of RAM
- Toshiba DTO1ACA100 1 TB hard drive
- Motherboard can be seen in the above link
- 970 simply does not
- Power supply may damage the motherboard or the CPU (Intel i5 4690 S)
- How overide and graphics (Intel 4600)
- What model of GPU and PSU to consider
I thank you very much for helping me I am pretty new to the PC construction or upgrade of processes and advice would be fantastic.
Your computer uses a standard ATX (PSU) power. Open the PC and measure the size of the PSU. Over 300 watts ATX HP power supplies should be 5.9 "by 3.4" 5.5 "then seek a replacement with the same measures. Your PC is open, measure to see how much space you have a graphics card. Study the posted article.
Corsair CS650m or CX600 would be a good choice for a power supply.
This EVGA GTX 970would be a good choice for a graphics card, but measure to make sure it fits.
My motherboard was replaced under warranty and reinstalled OS. so needless to say I'll have to reinstall many things. How to find the name of the network card? There is no name that appears in the Manager of devices or any other place that I have watched. On the inside of the computer, there are just a number: DC4A3E442418. I need the driver.
I found one driver on driver recovery DVD. This PC back together after a new motherboard and reinstalling the operating system is worse that my experience reformat a PC.
Thank you, Kay
The same situation on three computers WITHOUT fan back.
After bios update latest version (02.46 Rev.A) I am reciving on each 512-rear chassis error not detected start fan.
So the problem is definitely with the bios, that someone has the same problem?
OK, it seems that HP solutions. The problem was with the wrong bios file (version 2.46). First HP remove version 2.46 site Web and today I saw the new version of 2.47. In this case, HP automatically closed my ticket guarantee. Everything is ok with the new file.
First Post. Hello, all. For the last 5 days at the stop, I received, update 1, 1 to ensure that up-to-date driver "driver Intel Corporation update for Intel HD 4600 graphics card". It doesn't have every day. I did not notice problems during normal daily operation. It is only to stop the 1, 1 update is attempted. I have not tried a manual request for a download assuming that it generates the same result. I have not updated to Windows 10 and have disabled the attempts to do so. Any suggestion is appreciated.
@Photon713, welcome to the forum.
I had this same problem recently with Win 10. I have just go into Windows Update and remove the update. He'll be back sooner or later and install, but in the meantime I don't get a request to install it. This could give a try to see what is happening.
Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.
Maybe you are looking for
I would like to install Firefox pure, lean without other complementary software, such as "Ask search. Please download from the home page of Mozilla. Thank you for helping.
I wrote it in my Terminal words "hidden chflags" and got: chflags [-VHF] [r [h |]] L | -P]] flags file... does that mean? If it is not necessary could it be removed? How? Thank you.
I have old iMac and one day I erase everything so now I want all the programs back for it iMac, Mac OS X (10.4.8
Hi people, I want to put the screen on Aspire E5 - 571G of 1366 x 768 to FHD screen. This laptop also comes with a factory FHD screen while there should be no card motherboard/bios problem. The only thing I'm not sure of is whether I have a cable of
Failed to create system restore point exception exception c:\windows\system32\shell32.dll,control_rundll,"c:\windows\system32\sysbm.cpl",system
Original title: I can't do a restore point. I get exception c:\windows\system32\shell32.dll,control_rundll,"c:\windows\system32\sysbm.cpl",system what can I do? This has happened for a very long time.