product key has already been activated

Similar Questions

• Try to activate Windows, error: this product key has already been used on another computer

  (Original title: Hi I get this key product and equipment repaired already in use)

  How can I fix? any suggestions please? I can't activate my windows because it says that it has already been used, the cause of this is my equipment got repaired and when he returned he disabled just, please

  I tried to enter my product key for windows, and he just said "this product key has already been used on another computer" but that is the only computer where I installed my Windows 8, I tried the method by which you must contact their office by the number of the machine and you must give them 9 packed numbers and enter this told you on the phone. But I can't contact then given the number of the machine and also I tried to send the technician takes charge, but it did not help, I need help badly please. Thank you.

  Hi Christian,

  I understand that after getting your equipment repaired, you cannot activate Windows 8.

  As the ID of the product gets changed every time the internal components of the machine are modified and when you try to activate Windows it identifies it as a machine to new or different.

  I suggest you contact the support phone or chat for assistance with Windows.

  See the link below for the number of support:

  Global Customer Service phone numbers

  http://Support2.Microsoft.com/GP/customer-service-phone-numbers/en-GB?WA=wsignin1.0

  You want to chat instead, check the link below:

  http://answerdesk.Microsoft.com

  Hope this helps, get back to us if you need further assistance for Windows.

• I moved a drive and it says my activation key has already been used is anyway I can get it back to keep it active

  I moved a drive and it says my activation key has already been used is anyway I can get it back to keep it active

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question.

  This problem occurs because you changed the hard drive. When a change is made in the hard disk of the windows vista system will ask you to activate.

  To activate Windows Vista by using the automated telephone system, follow these steps:

  a. Click Start, and then click computer.
  b. click System Properties on the toolbar and then click here to activate Windows now in the Windows activation section.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  c. click Show me other ways to activate.
  d. click on use the automated telephone and then follow the instructions.

  You can also navigate to the link below and try to follow the steps to reactivate the copy of Vista.
  http://support.Microsoft.com/kb/950756

  Reference link:
  What is activation?
  http://Windows.Microsoft.com/en-in/Windows-Vista/what-is-activation

  Activate Windows on this computer
  http://Windows.Microsoft.com/en-in/Windows-Vista/activate-Windows-on-this-computer

  Please respond with the information. I'd be happy to help you further.

• PowerCLI - an element with the same key has already been added ERROR

  Hello

  I opened a case with VMware on a problem using PowerCLI. And pretty well, they said that they do not support scripts... But the error is not related to any script. It is related to the first command I run against one of our Vcenter and we have 6 of them.

  Everything worked well until we went from 4.1 to 5.1

  I can connect to our VCenter fine, but the first command always give an error and fail to the powercli but the task still occur in vCenter.

  When it gets ugly, is we have several powershell script to maintain and automate our environment but now these script fail.

  Example, we have a script to deploy the VM model and then configure the appropriate hardware configuration and add Notes and custom attributes. But the script fails after that deployment so the rest will not run. It will be possible that deploy us to the first virtual machine.

  So for 'Band-aid' question, I added a line to my script to start a virtual dummy machine, to make sure that what is in the script will work fine.

  Error:

  PowerCLI C:\Program Files\VMware\Infrastructure\vSphere PowerCLI > start-vm vm - Server-m46

  Start-VM: 2013/06/26 11:57:05 Start-VM an element with the same key has already been added.

  Online: 1 character: 9 + start-vm < < < <-vm server-m46 + CategoryInfo: NotSpecified: (:)) [start-VM], ViError + FullyQualifiedErrorId: Client20_VMServiceImpl_StartVM_ViError, VMware.VimAutomation.ViCore.Cmdlets.Commands.StartVM)

  As far as I know, done to the PowerCLI VMware supports.

  I don't think they support the client script debugging, but the product PowerCLI itself is supported.

  I created a few calls myself in the past.

  What you see is a known problem, there are a few discussions in this community who has something similar.

• I have Windows vista Ultimate edition. but he started asking for activation after the windows update while it has already been activated before the update.

  I have Windows vista Ultimate edition. but he started asking for activation after the windows update while it has already been activated before the update.

  Hello, Pichon,

  If Windows Vista application unexpected activation

  On rare occasions, you may be prompted to activate Windows Vista on a computer that did not previously require Windows Vista activation or has already been activated successfully. For example, this may occur on a computer on which Windows Vista was preinstalled by an OEM installation or Volume licensing and are major hardware changes occurred, such as upgrading the hard disk and memory at the same time.

  If you are prompted to reactivate Windows Vista, you can do this by using the Windows Activation Wizard to:

  1. Click Start, and then click computer.
  2. Click System Properties on the toolbar, and then click click here to activate Windows now in the Windows activation area. If you are prompted for an administrator password or a confirmation, type the password, or click continue.
  3. Select the Windows Vista activation method that you want, and then follow the instructions.

  To avoid this problem in the future, obtain the latest service pack for your version of Windows Vista, either through automatic updates or direct download.

  To update to Windows Vista and prevent this activation problem does not happen:

  1. Click Start, click all programs, and then click Windows Update.
  2. Click find updates.
  3. As soon as Windows Vista found the updates, click the install updates button.

  How to activate Windows Vista

  http://support.Microsoft.com/kb/940315

  Activation fails when you try to activate Windows Vista, Windows 7, Windows Server 2008 or Windows Server 2008 R2 on the Internet

  http://support.Microsoft.com/kb/921471

• Add-PSSnapin: an element with the same key has already been added

  When you run Add-PSSnapin, I get the above error. This seems to happen if I try to add the snap a second time, but when this happens, none of the power CLI commands are then available up to what the server is restarted.

  Add-PSSnapin: an element with the same key has already been added.

  At C:\Windows\system32\WindowsPowerShell\v1.0\Modules\

  + Add-PSSnapin $SnapinName;

  +     ~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: NotSpecified: (:)) [Add-PSSnapin], ArgumentExcept)

  ion

  + FullyQualifiedErrorId: System.ArgumentException, Microsoft.PowerShell.Co

  mmands. AddPSSnapinCommand

  Failure of the attempts to remove the snap-in at this point with:

  Remove-PSSnapin: no Windows PowerShell snap-ins for the model

  "VmWare.VimAutomation.Core" were found. Check the pattern and then try the

  command again.

  At C:\Windows\system32\WindowsPowerShell\v1.0\Modules\

  + Remove-PSSnapin $SnapinName;

  +     ~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: InvalidArgument: (VmWare.VimAutomation.Core:Stri

  NG) [Remove-PSSnapin], PSArgumentException

  + FullyQualifiedErrorId: NoPSSnapInsFound, Microsoft.PowerShell.Commands.R

  emovePSSnapinCommand

  I already tried to uninstall the dll and put it back, that makes no difference

  $dllpath = "C:\Program Files (x 86) \Vmware\Infrastructure\vSphere PowerCLI\VMWare.VimAutomation.VICore.Cmdlets.dll.

  $SnapinName = "VmWare.VimAutomation.Core".

  #get the path to instalutil

  $path = [System.Runtime.InteropServices.RuntimeEnvironment]::GetRuntimeDirectory();

  #create an alise for installtuil

  set-alias installutil (resolve-path (join-path $path 'installutil.exe'));

  #uninstall snap

  InstallUtil /u $dllpath;

  InstallUtil $dllpath;

  I tried appdomain unloading, then adding the snap-in with the same result:

  $appdomain = [AppDomain]: CurrentDomain

  $appdomain. # Of unloading | Out-Null

  Add-PSSnapin "VMware.VimAutomation.Core".

  $appdomain. Load

  Everything simply jump beyond the error is not good because it is impossible to find the following commands:

  Add-PSSnapin "VMware.VimAutomation.Core" - ErrorAction SilentlyContinue

  Get - VM $VirtualMachine

  The term 'Get - VM' is not recognized as the name of a cmdlet, function, script file, or an executable program. Check the spelling of the name, or if a path has been included, make sure the path is correct, and then try again.

  Any help to fix this would be greatly appreciated.

  Thank you

  OK, I was kind of what went wrong here.

  The snap has been loaded from a powershell module. When the module is removed and added again, the snap ceases to function, but also can not be added again.

  If the snap is loaded first outside the module everything works fine until you try never to remove or add snap-in module.

• An element with the same key has already been added

  Hi all

  I see a strange problem when you try to add a new disk to a virtual computer via powershell

  I use the following commands:

  Add-PSSnapin VMware.VimAutomation.Core

  to connect-viserver-Server $MyVC

  $server = "MyServer".

  $vm = get - vm $server

  $NewDisk = new-disk-hard - VM CapacityGB - $DiskSize - StorageFormat $StorageFormat $VM

  When I run it, the drive is added, but what follows is cast in the output:

  New hard drive: 24/06/2013-11:04:22

  New-harddisk

  An element with the same key has already been added.

  On line: 1 char: 11

  + $NewDisk = new-disk-hard - VM $VM CapacityGB - $DiskSize - StorageFormat $StorageForm...

  +	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  	+ CategoryInfo	: NotSpecified: (:)) [new-harddisk], ViError)
  	+ FullyQualifiedErrorId: Client20_VirtualDeviceServiceImpl_NewVirtualHardDisk_ReconfigError, VMware.VimAutomation.

  ViCore.Cmdlets.Commands.VirtualDevice.NewHardDisk

  When I restarted the command in the same pssession and then it is executed without error.

  Has anyone seen this behavior before?

  This could be a bug?

  I searched for this error, but this seems like something very generic...

  Thanks in advance!

  Filip

  Hi Filip,

  This looks like the same problem as already reported in first New - VM: an element with the same key has already been added.

• First New - VM: an element with the same key has already been added.

  
  I get a strange error that I have seen a few other posts, but with no resolution (or at least one that I can find).  When you try to create a new virtual machine using the cmdlet New - VM, I get the error "an item with the same key has already been added."

  Now, here's the key that I've not seen many others to mention.  This ONLY happens on the first attempt for each new connection with Connect-VIServer.  I can create as many of the same machines that I want after that first mistake with the same settings (new name of course).  If I disconnect and reconnect again, the error appears for the first time.

  Normally with PowerShell, I have just to catch the error and be on my way.  However, in this case I use the parameter - RunAsync, so that I can capture the task that is returned in a variable.  From there, I use Wait-task until the virtual machine is complete before moving on with the script.  Everything works fine when the error occurs, but when it happens that the object of the task is not returned and the rest of her vomit script errors.

  I am running the latest version of PowerCLI and I tried this on PowerShell v2.0 and v3.0 and get the same results.  I tried different models and guests without success.  I also tried this with and without assistance - AllLinked on Connect-VIServer-bound mode.  I should mention that I am cloning model, by specifying a spec customization and host cluster data store.  Again, the only common denominator repeatable here is that this ONLY happens on the first attempt to use New - VM session to vCenter.

  Any ideas or suggestions?

  If this is useful at all, here are the details of the output on the exception:

  PS C:\ > $Error [0]
  New - VM: 05/06/2013-09:49:22 new-VM an element with the same key has already been added.
  On line: 1 char: 11
  + $VMTask = new-VM-name "NEWTEST20" - model 'Template' - OS...
  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  + CategoryInfo: NotSpecified: (:)) [new-VM], VimException)
  + FullyQualifiedErrorId: Core_BaseCmdlet_UnknownError, VMware.VimAutomation.ViCore.Cmdlets.Commands.NewVM

  PS C:\ > $Error [0]. Exception | Select *.

  
  ErrorId: Core_BaseCmdlet_UnknownError
  ErrorCategory: NotSpecified
  TargetObject:
  RecommendedAction:
  SessionId:
  Login ID: /VIServer=USERNAME@SERVER:443/
  Severity: error
  Message: 05/06/2013-09:49:22 new-VM an element with the same key has already been added.
  Data: {ParameterValues}
  InnerException: System.ArgumentException: an item with the same key has already been added.
  to System.Collections.Generic.Dictionary'2.Insert (TKey key, TValue value, Boolean add)
  at VMware.VimAutomation.ViCore.Impl.V1.Service.StaticDataServiceImpl.PopulateTaskDescriptionDict
  ionary()
  at VMware.VimAutomation.ViCore.Impl.V1.Service.StaticDataServiceImpl.GetTaskDescription (String
  taskDescriptionId)
  at VMware.VimAutomation.ViCore.Impl.V1.Task.TaskImpl.Create (ManagedObjectReference moRef,
  Customer VimClient, accessories 2 dictionary, extensionData object)
  to VMware.VimAutomation.ViCore.Impl.V1.Task.ViCoreTaskCoreServiceProviderImpl. < GetTaskListForCli
  ENT > d__7.MoveNext)
  System.Collections.Generic.List to ' 1.InsertRange (Int32 index, 1 IEnumerable collection)
  at VMware.VimAutomation.ViCore.Impl.V1.Task.ViCoreTaskCoreServiceProviderImpl.GetTaskList (IEnume
  uidList Maple 1, IEnumerable 1 connectionUidList)
  to VMware.VimAutomation.Sdk.Impl.V1.Task.CoreTaskServiceImpl.GetTaskList (IEnumerable 1 uidList,
  IEnumerable 1 connectionUidList)
  to VMware.VimAutomation.ViCore.Impl.V1.Service.TaskServiceImpl.GetTaskCore (Nullable State 1,)
  IList 1 connectionUidList)
  to VMware.VimAutomation.ViCore.Impl.V1.Service.TaskServiceImpl.GetTask (Nullable State 1,)
  CmdletTaskInfoProvider cmdletTaskInfoProvider)
  at VMware.VimAutomation.ViCore.Impl.V1.Service.TaskServiceImpl.GetTaskById (String uid,
  CmdletTaskInfoProvider cmdletTaskInfoProvider)
  VMware.VimAutomation.ViCore.Impl.V1.Service.VmServiceImpl.NewVM (model TemplateInterop,
  VMHostInterop vmHost, string name, resourceContainer, FolderInterop location VIContainerInterop,.
  StorageResourceInterop data store, Nullable 1 diskStorageFormat, OSCustomizationSpecInterop
  customization, Boolean, Boolean, string 1 Nullable description isRequestedAsync allowNested
  Nullable, 1 haIsolationResponse, Nullable 1 drsAutomationLevel, haRestartPriority, [AdvancedOption]
  options)
  to VMware.VimAutomation.ViCore.Cmdlets.Commands.NewVM.DoWork (customer VIAutomation, moList list 1)
  at VMware.VimAutomation.ViCore.Util10Ps.BaseCmdlet.BaseCmdlet.DoWork (VIConnection connection,
  MoList list 1)
  at VMware.VimAutomation.Sdk.Util10Ps.BaseCmdlet.BaseCmdlet.DoWorkEx (VIConnection connection,
  MoList list 1)
  to
  VMware.VimAutomation.Sdk.Util10Ps.BaseCmdlet.ConnectionDispatchHelper.ExecuteRunlist (dictionary 2
  runlist, DoWorkDelegate doWorkDelegate, UidDispatchHelper uidDispatchHelper, result of list 1)
  TargetSite:
  StackTrace:
  HelpLink:
  Source:

  PS C:\ > $Error [0]. Exception.InnerException | Select *.

  
  Message: An element with the same key has already been added.
  ParamName:
  Data: {ConnectionId}
  InnerException:
  TargetSite: Void Insert (TKey, TValue, Boolean)
  StackTrace: At System.Collections.Generic.Dictionary'2.Insert (TKey key, TValue value, Boolean add)
  to
  VMware.VimAutomation.ViCore.Impl.V1.Service.StaticDataServiceImpl.PopulateTaskDescriptionDictionary)
  at VMware.VimAutomation.ViCore.Impl.V1.Service.StaticDataServiceImpl.GetTaskDescription (String
  taskDescriptionId)
  at VMware.VimAutomation.ViCore.Impl.V1.Task.TaskImpl.Create (ManagedObjectReference moRef,
  Customer VimClient, accessories 2 dictionary, extensionData object)
  to VMware.VimAutomation.ViCore.Impl.V1.Task.ViCoreTaskCoreServiceProviderImpl. < GetTaskListForClient
  > d__7.MoveNext)
  System.Collections.Generic.List to ' 1.InsertRange (Int32 index, 1 IEnumerable collection)
  to
  VMware.VimAutomation.ViCore.Impl.V1.Task.ViCoreTaskCoreServiceProviderImpl.GetTaskList (IEnumerable 1)
  uidList, IEnumerable 1 connectionUidList)
  to VMware.VimAutomation.Sdk.Impl.V1.Task.CoreTaskServiceImpl.GetTaskList (IEnumerable 1 uidList,
  IEnumerable 1 connectionUidList)
  to VMware.VimAutomation.ViCore.Impl.V1.Service.TaskServiceImpl.GetTaskCore (Nullable State 1,)
  IList 1 connectionUidList)
  to VMware.VimAutomation.ViCore.Impl.V1.Service.TaskServiceImpl.GetTask (Nullable State 1,)
  CmdletTaskInfoProvider cmdletTaskInfoProvider)
  at VMware.VimAutomation.ViCore.Impl.V1.Service.TaskServiceImpl.GetTaskById (String uid,
  CmdletTaskInfoProvider cmdletTaskInfoProvider)
  VMware.VimAutomation.ViCore.Impl.V1.Service.VmServiceImpl.NewVM (model TemplateInterop,
  VMHostInterop vmHost, string name, resourceContainer, FolderInterop location VIContainerInterop,.
  StorageResourceInterop data store, Nullable 1 diskStorageFormat, OSCustomizationSpecInterop
  customization, Boolean, Boolean, string 1 Nullable description isRequestedAsync allowNested
  Nullable, 1 haIsolationResponse, Nullable 1 drsAutomationLevel, haRestartPriority, [AdvancedOption]
  options)
  to VMware.VimAutomation.ViCore.Cmdlets.Commands.NewVM.DoWork (customer VIAutomation, moList list 1)
  at VMware.VimAutomation.ViCore.Util10Ps.BaseCmdlet.BaseCmdlet.DoWork (VIConnection connection,
  MoList list 1)
  at VMware.VimAutomation.Sdk.Util10Ps.BaseCmdlet.BaseCmdlet.DoWorkEx (VIConnection connection,
  MoList list 1)
  to
  VMware.VimAutomation.Sdk.Util10Ps.BaseCmdlet.ConnectionDispatchHelper.ExecuteRunlist (dictionary 2
  runlist, DoWorkDelegate doWorkDelegate, UidDispatchHelper uidDispatchHelper, result of list 1)
  HelpLink:
  Source: mscorlib

  
  

  I was informed that this is actually a "known" bug and a fix has already been planned for the release of the future code.  After getting the access to a beta version, it does not seem to be fixed in the next release.

• activate my membership and paid for it as well, but the creative cloud app shows only the trial versions of the programs? What does that mean? Cause I followed the installation steps, and when I try again it says my installation code has already been

  I activated my subscription and paid for it as well, but the creative application cloud shows only the trial versions of the programs? What does that mean? Cause I followed the installation steps, and when I try again it says my installation code has already been activated?...

  Kindly Contact customer and details of payment verified. [Make sure that you are connected to the Web site with the valid Adobe ID under which the product is licensed].

  
  

  
  

• HELP: Activation server determined that the specified product key has been blocked

  I did a complete reset of my ENVY 17 laptop and now whenever I try to re-activate Windows 8 Pro that I reinstalled using the USB recovery, I get error:

  Code: 0xC004C003

  Description: The activation server determined that the specified product key has been blocked.

  I have Microsoft Suppot had called and were told to contact HP (manufacturer of my pc. Someone at - he met sam and how wa it is resolved?

  Thank you

  Rico.

  Solved! HP technical support took care of me Thank you so much.

• Activation server determined that the specified product key has been blocked.

  I bought a version of Windows 7 on 2 or 3 years of Staples.  The seal on the media case was in place.  The version was installed and working fine since installation.  I have the case with the seal, media and product key.

  Last week, a message popped up the version was invalid.  When I try to turn on again, I get the message the product key has been blocked.

  As I said, it was new branch of Staples.  I don't understand how this can be an invalid version.

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us
  ----------------------
  Have you installed a new hardware or software since you started facing this problem?

  Do you have any software installed record cleaning? If so, uninstall it, registry software is known to tamper with Windows activation technologies.

  What Antivirus utility you installed?

  What's your date and time correct?

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

• Windows 7 Ultimate Activation get error, "product key has been blocked from use by Microsoft.

  Hi I am trying to activate Windows on my laptop.  I put in the correct product key and it says that the product key has been blocked by Microsoft use.  How to solve this?

  Thank you

  Brandon

  Windows product ID: 00426-067-8248715-86053

  The ID of the product - 067 - indicates a not for resale MSDN account. If you are not the account holder and you bought it in a box at retail, the box and its contents is counterfeit. Request an immediate refund from the seller

  For more information, see this:

  http://social.Microsoft.com/forums/en-us/genuinewindows7/thread/a2444f34-0AFF-4f29-a8ac-67e28b0c0285

  And this:

  http://social.Microsoft.com/forums/en-us/genuinewindows7/thread/309bb621-92d5-43d6-98c1-2bb51b35607f

  To see how these counterfeits are more, see:

  http://www.YouTube.com/watch?v=hzqNNiOM0cs

  You can buy a legitimate windows from a legitimate retailer.

• Product key is already in use - activation of a copy on a new computer.

  Recently, I bought a computer from a big brand. I installed a legitimate copy of Windows Vista Edition Family Premium on it which came with my dads computer, also bought the same brand. The installed fine print, on more than one occasion and has been also validated successfully on each installation. The same disc has been used before that to install and activate a copy of Windows on my dads computer.

  However, my computer broke and after much hassl, he was returned to the company and I am waiting for a refund. I formatted the computer off until it is, including the installed copy of Vista.

  Now, I bought a new computer and installed the same copy of Vista on it. Once again no problems with installation.

  When I came to activate Windows online I met with the message that the product key is already in use. Of searching this forum I found that I was able to activate the copy by phone and so called, followed the instructions and was told that I could not activate this copy that was only to use a computer.

  How can I now go to the activation of the copy that I have on my new computer? If I was told it correctly and it can be installed on a computer, then how is it that a second facility was made and activated on my old and now returned computer?

  Any help would be valuable.

  By purchasing a commercial version, you have an oem version which is forever linked to the origonal PC, and when this PC die so do your vista licenses

• My product key has been blocked... why?

  Yesterday, I installed Windows 7 (32 bit) in a Machine virtual VirtualBox; but the machine has got corrupted. so I reinstall Windows 7 again, today. I couldn't enter my product key, so I did the "slmgr.vbs-ipk PRODUCT KEY' then"slmgr /ato"(without the quotes) and moments later a message came up saying that"the activation server determined that the specified product key has been blocked."

  This is a legal copy of Windows 7 purchased at Christmas 2009. (which pisses me because I don't not pirate it.)

  That's why I love Apple; NO product key of worry. (But I need Windows 7 for Win programs only.)

  I see a lawsuit resulting from this problem by conducting a LEGAL copy of same.

  Try again by phone:

  Activate Windows 7 manually:
  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.
  4. Select the telephone activation option and brace yourself for a real person.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• My Windows 7 Ultimate product key has been blocked please help

  Hi, I've been using windows 7 for about a month until a few weeks ago. When I started my PC it says that

  Windows 7

  Build 7600

  This copy of windows is not genuine

  I don't know why this has happened as it was fine before, I tried to turn it on, but it says that "this product key has been blocked by microsoft" can someone please explain why this happened I ran the diagnostic report...

  Diagnostic report (1.9.0027.0):

  -----------------------------------------

  Validation of Windows data-->

  Validation code: 50

  Code of Validation caching online: 0xc004c4a2

  Windows product key: *-* - FF3XX - 77DMB-MDMQ3

  The Windows Product Key hash: xAeLQW1w3CM66wpnZFn6od/GkYA =

  Windows product ID: 00426-067-3204723-86717

  Windows product ID type: 5

  Windows license type: retail

  The Windows OS version: 6.1.7600.2.00010100.0.0.001

  ID: {FDBE767D-3E74-4E3A-9A6E-E7D5D56D0682} (3)

  Admin: Yes

  TestCab: 0x0

  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002

  Signed by: n/a, hr = 0 x 80070002

  Product name: Windows 7 Ultimate

  Architecture: 0x00000000

  Build lab: 7600.win7_gdr.100226 - 1909

  TTS error:

  Validation of diagnosis:

  Resolution state: n/a

  Given Vista WgaER-->

  ThreatID (s): n/a, hr = 0 x 80070002

  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->

  Cached result: n/a, hr = 0 x 80070002

  File: No.

  Version: N/a, hr = 0 x 80070002

  WgaTray.exe signed by: n/a, hr = 0 x 80070002

  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->

  Cached result: n/a, hr = 0 x 80070002

  Version: N/a, hr = 0 x 80070002

  OGAExec.exe signed by: n/a, hr = 0 x 80070002

  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->

  Office status: 108 VLK invalid

  Microsoft Office Enterprise 2007 - 108 VLK invalid

  OGA Version: N/a, 0 x 80070002

  Signed by: n/a, hr = 0 x 80070002

  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->

  Proxy settings: N/A

  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)

  Default browser: C:\Users\Dell\AppData\Local\Google\Chrome\Application\chrome.exe

  Download signed ActiveX controls: fast

  Download unsigned ActiveX controls: disabled

  Run ActiveX controls and plug-ins: allowed

  Initialize and script ActiveX controls not marked as safe: disabled

  Allow the Internet Explorer Webbrowser control scripts: disabled

  Active scripting: allowed

  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->

  Office details: {FDBE767D-3E74-4E3A-9A6E-E7D5D56D0682}1.9.0027.06.1.7600.2.00010100.0.0.001x 32*-*-*-*-MDMQ300426-067-3204723-867175S-1-5-21-4221809875-1077414371-4188047510Dell Inc.                 Dimension 5100 Dell Inc.                 A0320060707000000.000000 + 00064B93607018400FC08090409GMT Standard Time(GMT+00:00)03108108Microsoft Office Enterprise 2007127480B9502DF0D86oYWOW5ayFE3pZ jvTpuXYsY64JE plus89388-707-8722531-6536214

  Content Spsys.log: 0 x 80070002

  License data-->

  The software licensing service version: 6.1.7600.16385

  Name: Windows 7 Ultimate edition

  Description: operating system Windows - Windows (r) 7, retail channel

  Activation ID: a0cde89c-3304-4157-b61c-c8ad785d1fad

  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f

  Extended PID: 00426-00172-067-320472-00-2057-7600.0000-1982010

  Installation ID: 005811930862457055912375892861264201060972382930684844

  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338

  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339

  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341

  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340

  Partial product key: MDMQ3

  License status: Notification

  Reason for the notification: 0xC004F200 (non-genuine).

  Remaining Windows rearm count: 3

  Trust time: 2010-07-17 00:34:34

  Windows Activation Technologies-->

  HrOffline: 0x00000000

  HrOnline: 0xC004C4A2

  Beyond: 0 x 0000000000000000

  Event timestamp: 7:17:2010 00:18

  ActiveX: Registered, Version: 7.1.7600.16395

  The admin service: recorded, Version: 7.1.7600.16395

  Output beyond bitmask:

  --> HWID data

  Current Hash HWID: NAAAAAEABAABAAEAAAACAAAAAgABAAEAeqh07KxCSOSqdgZUVpiulwaHmoigvRIbTh/sow is

  Activation 1.0 data OEM-->

  N/A

  Activation 2.0 data OEM-->

  BIOS valid for OA 2.0: Yes, but no SLIC table

  Windows marker version: N/A

  OEMID and OEMTableID consistent: n/a

  BIOS information:

  ACPI Table name OEMID value ValueOEMTableID

  APIC DELL 5100

  FACP DELL 5100

  HPET DELL 5100

  STARTING DELL 5100

  MCFG DELL 5100

  SSDT DELLst_ex

  ASF! REFERENCE DELL 5100

  Please answer soon because I really want my windows 7 back

  Windows product ID: 00426 -067 - 3204723-86717

  EDIT: Additional information

  Things to watch for.

  Recently reported several cases of blocked MSDN keys packed with the media looking legitimate. I can not stress enough to save your packaging, media and reception, if you buy software such as this to appeal to the Bank, you bought it and report it to www.microsoft.com/piracy

  If you bought a key, with or without DVD or packaging of EBAY, or any other person or seller and this could be a MSDN key because your key has been blocked you can check a few things yourself, if you have received your key with the physical product go to www.microsoft.com/howtotell and check your product, however some counterfeit software are thus convince you may not be able to identify it as such.

  To check your PID press the key to victory and the pause at the same time, or system opened via the Control Panel, scroll to the activation section and properties related to computing PID will look something like this 12345-067-1234567-54321, the part that you are interested in is the section to three digits, if it corresponds or is included in one or two digits for the examples below You probably have a MSDN key.

  065, 066, 067 for Ultimate, box 220 for Pro and the 230, 231 area of award, there are probably others, but they should be close to those that are displayed

  If you have a similar PID, or your key is blocked and you want the confirmation message, a new thread with a report from the MGADIAG tool, download and run the tool, click on copy and paste it in a new post here and Darin Smith of MS can check your key for you. NEVER send your keys, the report will be sufficient.

  Go.Microsoft.com/fwlink/?LinkId=52012

  By Carl Oh, more:

  Stuck key (error 0xC004C4A2):
  http://social.Microsoft.com/forums/en-us/genuinewindows7/thread/a2444f34-0AFF-4f29-a8ac-67e28b0c0285

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP