Product number: VN936EA #ABU: HP PRO SFF 3010 GRAPHICS CARD UPGRADE HELP

Similar Questions

• HP 6005 Pro SFF: Replace video card ATI Radeon HD 4200 graphics upgrade for HP 6005 Pro SFF

  I have a HP 6005 Pro SFF with a 240W PS, and I want to upgrade the video card.  It has an ATI Radeon HD 4200.    An HP Forum person (Paul Tikkanen) recommended an upgrade for a 6005 using a video card optional for the HP 6200 Pro SFF:

  http://www.Newegg.com/product/product.aspx?item=N82E16814121439&cm_re=hd_6450-_-14-121-439-_-product

  Please confirm it also works for the 6005.  If I replace it, can I actually remove the Radeon 4200 and replace it directly at the space of the same card mother slot to save space of PCI Expansion slot, or do I use the expansion PCI Express 16 x slot?   If so, is the procedure for the direct replacement documented anywhere?

  Hello:

  The ATI Radeon HD 4200 Video on your PC is the graphics chip integrated according to page 14 of the quickspecs at the link below. In other words, the graphics card is a chip that is soldered to the motherboard.  It is not in an expansion slot.

  http://static.highspeedbackbone.NET/PDF/HP%20Compaq%206005%20PRO%20Business%20pc%20Quick%20Specs.PDF

  The dedicated PCI express x 16 slot should be empty now, and this is where you install the card I have recommended.

  I don't see why the HD 6450 work.  It works in the dc7800, dc7900, Pro 6000, 6200 pro, 8000 Elite, Elite 8100 and 8200 Elite business desktop PC.

  You just need to make sure that uninstall you the HD 4200 graphics card and the driver in Device Manager.  Also check the uninstalling the driver box.

  Also uninstall catalyst control center software in the Add/Remove programs in the control panel section, stop and disconnect the PC, install your new video card and the driver for the 6450.

  Here is the link to the service manual. See Chapter 2 pp 20-25 for the installation procedures card expansion, paying special attention to the info of PCIe x 16 slot.

  http://h10032.www1.HP.com/CTG/manual/c01870938

• How to find the serial number of 8300 Gs graphics card please help

  I try contact evga tech support but I need the number of graphic series of 8300 Gs registration card of finished products for support technique evga. My pc is a Dell inspiron 530 pc exalted pix to A crash, I'm sure that the screen's video card problem.  I do not turn off the pc and open the computer case and find the 8300 GS graphics still then the Pc card serial number works well. I have Service Tag any good help please

  Do you mean you bought an EVGA 8300 GS on your own or being the 8300 GS installed by Dell?  The serial number will be on the retail box or on a sticker on the map.  You need to open your side panel and look on top of the card to get the serial number if necessary.  If installed by Dell, most likely you don't have any collateral at this stage on the 530.

• Mac Pro equipped with graphics cards

  (1) Apple certified repair done remarkable work or replacement of these cards, seemed as it did thousands due to schools, universities, colleges had all the problems that I did.

  (2) now did the-d option to initialize the data sent to Apple and have assigned Senior Adviser.

  (3) most recent problem is error codes and system dead slow on my second Mac Pro 6 hearts. Now, does not see my Amd hardware, which is extremely strange to say the least.

  (4) 2 weeks no words or calls returned Senior Advisor, still more serious delays to write make some income with new Mac Pro.

  (5) what did not work is not, the example is iMovie stutters sound.

  (6) final Cut Pro sound of of synk

  (7) k video from my new iPad Pro 4 who made 4 K video sent to dump not recognized on Mac Pro system after that reminder of graphics cards has been made.

  so waiting for words from Apple on the d option played 4 times.

  < published by host >

  Nope... but... all I can do is give you my experience. I got a G5 liquid that had major failure 3 times (was under AppleCare) and has been replaced with a Mac pro. I guess you have tried the usual, killer stuff pram resetting the PMU, trying to reinstall and update the operating system and various applications to this topic and all that, and... nothing. Apple does not read or respond to these forums, cmdrDenis, this place is strictly a user forum, and that's all. Save all your receipts, paperwork, document as much as you can and when you talk to Apple or an adviser, be polite, but pragmatic.  Screaming, yelling, Ranting and raving you will get very far.  If you go to apple.com/feedback and leave a comment there, someone can get back to you. Call the main line from Apple can be useful too, but about what, when and how

  I can't say. Apple * may *, in its sole discretion, replace a machine that has had too many major repairs, or repair, but it's Apple to do.  Maybe if you call your local Apple place, explain the situation calmly and kindly and ask to speak to another senior consultant or Manager, perhaps they can help you.

• Satellite Pro P300 - update graphic card and CPU

  I have a Satellite Pro P300 and I was wondering if the CPU or the graphics card can be improved?

  I really like my laptop, but an upgrade is imminent and before I take the plunge I just want to see if it is all options other than a new laptop.

  Hello

  Processor and graphics card update is not supported and there is no list with compatible processors. If everything is on your own risk. In the worst case a new processor will not be recognized from the motherboard or BIOS, probably you need a new module of cooling too so I wouldn t this

  In addition, the graphics card is attached to the motherboard and cannot be exchanged.

  => [Can I upgrade the CPU, graphics card or motherboard in my Toshiba laptop? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=13]

• Re: Satellite Pro L10 - what graphics card can I for the SIMS 3?

  What graphics card can I play the sims 3 on a Satellite Pro L10?

  It must support shader 2

  Hello

  The L10 Pro Sam is a former an I doubt that you will get the Sim 3 running on this laptop.

  You need much stronger unit!

• Satellite Pro 6100 Graphics Card upgrade/replacement

  I have a Satellite Pro 6100 p4 - m 2.0 30 GB and the graphics card is dead. I love this laptop.

  He had a NVidia GeForce4 420 Go 16 MB card

  I can replace it with a GeForce4 420 Go 32 MB of the same model.

  Is there something more powerful on the market that works without any problem for the 6100? That is to say. GeForce4 440 Go 64 MB?

  See you soon

  Usually didn t of toshiba offers an update of the separate graphics card but he had different graphics cards installed in your computer, and, THEORETICALLY, you can use each of these cards in your machine. I can't promise it but they should all work in this machine.

  The problem is to disassemble the machine completely and if you do something wrong then you know that it is useless to come back because your machine is no longer in warranty. It would be wise to give the machine a technician to exchange the graphics card.

  Unfortunately, I can't tell you what graphics cards in your machine or which partnumbers are needed. In this case you´re on your own.

  Good luck

• Sat Pro 2100: the graphics card driver updates

  I bought a laptop from Toshiba in 2002 (satellite pro) and they have just updated the VGA driver once...
  I bought a toshiba, then because they had the graphics card, I'd need for my study (virtual design) but now because Toshiba somehow don't think that new drivers are important I can't use certain features have new drivers and my chip does not support, but I have not the driver for them.
  Is this normal?
  If it is then maybe I should get another brand in the future.

  Gaga Hello

  As you know Toshiba have many different models of laptops, and I think that it is not easy to design and test many updates especially for older models. In my opinion, you should check what new portable has the same or similar graphics card and try to install the latest driver designed by Toshiba.

  Unfortunately I put t know one you have and don't know if the new driver will be working properly, but you can try anyway.

  Good bye

• Prodesk 400 G1 SFF: 400 Prodesk G1 SFF - update graphics card

  Hello world

  I have an interesting problem that I hope you guys could help me with.

  I have a Prodesk 400 G1 SFF and trying to update the graphics card integrated with a GeForce 210.

  The thing is when I put the card into the slot, and then start the on-board computer and the new

  come into conflict.

  It seems to begin completely on the windows login screen, but the only thing you can see is the slider (when you move
  the mouse) on a black background. When I remove the new card, the computer starts and the screen works fine

  I tried to install the GeForce 210 drivers without the card in the slot, but then I get an error message saying that the
  material is not found and can not continue the installation.

  I tried to insert the new card with windows started (I know, not a good idea) to see if the installation process
  detects the card then, but I got the same message "hardware not found".

  It seems that I'm pretty locked. I can't put the card into the slot, because then the screen does not work and I can't
  install the drivers without the card because it must be inserted in order to ensure that it can be installed.

  You guys have any suggestions on how to solve this problem or someone of you had similar experiences?

  Appreciate the help,

  Fredrik

  You are the very welcome, Fredrik.

  Yes, without the new card installed... First go in the bios, turn on legacy mode and disable secure boot.

  HP video card will not work on any HP PC that comes with the W8 or newer of the factory, unless these BIOS settings are changed.

  Normally the PC won't start not even with those setting enabled and a HP not installed video card.

  Then, after changing these settings (without the new installed card), reboot the PC and go into windows, go to Device Manager, click to expand the category of device display maps, right-click on the Intel HD graphics card, select uninstall and check the box uninstall driver.

  Do not restart requested.  Shut down the PC and install the video card.

  Turn on the PC, hope it works, and then install the drivers.

  If you encounter problems (which I doubt you want) you can always remove the graphics card, clear the CMOS which resets all parameters of the BIOS to default values.

  Then reinstall the Intel graphics drivers.

• Ray-tracing on GPU disabled on MacBook Pro with a graphics card double

  Hi all,

  I just installed the demo version of scars on my new macbook pro 15 ".
  He has these 2 graphics cards:

  • Intel Pro Iris graphics card
  • NVIDIA GeForce GT 750M
    2 GB of GDDR5 memory

  But when I opened After effects CC I get this error:

  Ray-tracing on GPUS requires a map dgraphic approved NVIDIA and CUDA 5.0 or higher. At the moment the ray-tracing will use just the CPU.
  On NVIDIA, I saw that mine is a CUDA GPU: https://developer.nvidia.com/CUDA-GPUs .
  Why I get this error?

  Thank you

  > However, I can install driver CUDA 5.0 + with GT750M and use ray-tracing with GPU on AE (OSX)?

  You can use it, but it was not tested and not supported. You use it at your own risk, with the caveats explained here:

  pengl-in-after-effects-CC-12-1.html http://blogs.adobe.com/AfterEffects/2013/09/GPU-Changes-for-CUDA-and-o

• Vs CPU Ram graphic card upgrade for Mac pro performance?

  Just after the crossroads to aboard the cloud to Adobe and seeks help on CPU Ram vs graphics card GPU.

  Material:

  • MAC Pro (early 2009) 4.1 2.26 Ghzdual core 8, 23 grams (5 x 4 g sticks and sticks of 3 x 1 G), 4 x 1 TB 7200 RPM int. HD (1 scratch drive), (no windows don't things here)
  • Graphics card Ge Force GT120 Machine has 64-bit capability, but normally starts in 32- bit due to old still used 32-bit apps.
  • Watch CS6 AE activity monitor uses all 16 son, works in 64 bitsand seizes about 10 Gig of ram to operate in.

  Software:

  • Running OS x 10.6.8. (Snow leopard) with all updates.
  • All major video applications: creative cloud (also have studio FCP 3 installed but just move to Adobe now on video works)

  I really like this AE & body use all threads, made in the background (which results in NO crashes (so far)) because my old 120 GT video card apparently is more stifling that it worked in FX in FCP 7 & 4 Motion.

  1. Q - can someone point me in the direction of how Adobe got the device to use all the cores and threads and run it in 64-bit, but starts in 32 bit?

  In terms of performance, (rendered in particular) I know I should go to the Apple/ATI 5870 graphics card, but as a veterinarian of fixed-income securities disabled, $450 is hard to find. I evaluated cards flashes, including those of macvidcards on ebay, but for used cards which are flashed, it gives me pause, especially when they are about the same price as the new price of 5870.

  So I am struggling with trying to figure out that the best shot for the less $$$, where the issue of the title.

  1. Is it more effective for video FX works to add CPU ram or (gulp) to upgrade the video card to 5870 card?

  Example: I can add sticks of 3 x 4 G in place and place existing 3 x 1 G sticks of ram for less than $200 CPU. A new 5870 card is $ 450 Apple. Approach that annoys me that most make speed plant put VFX work in AE CS6 or P Pro CS6?

  Sorry, I'm more than a little fuzzy on this, but hoping a kind soul will lead the way.

  Ken

  For After Effects, more RAM is better. For Premiere Pro, an improved GPU is more important. In addition, you might consider spending money even on an SSD, which is beneficial for both (for caches).

  See this page for more information on material for Premiere Pro and Adobe After Effects: http://adobe.ly/pRYOuk

• Product number: QH753EA #ABU: Wifi works do not since the update of Windows 10

  Since the update to windows 10 my wifi stopped working. The key of the keyboard is permenantly orange and that changes in airplane mode when you press. I can connect to internet with the ADSL cable. Network shooting report problems it says only: the "Wireles capability is disabled" but I cannot turn it on.

  Return you to W7.

  I highly doubt that Realtek will publish all the drivers for this model card W10 since they ceased support of the drivers for this card model to S8.

• Product number: J2U73EA #ABU: No. Volume on laptop?

  I do not have any volume on my laptop? I tried to look at the problems that have already been resolved, and when I click on the link to download anything, they install it says that I am forbidden to use?  Any help would be thank you very much

  Hello

  Try the following - which implies that you are running Windows 8.1

  Download the Realtek Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69624.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the Realtek device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, stop the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the installation of Realtek Audio program and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  Left-click 'Speakers and headphones' (or speakers/HP) once to highlight and then click set as default (if it is grayed out, it will be already the default) - check if you have now audio.

  Kind regards

  DP - K

• No wireless device is available product number: C2B52EA #ABU Windows 8

  Hello, I've had this laptop for over a year now, and the wifi worked very well up until now. Last Saturday (8 February), I've been unintalling programs 'junk' and disableing 'junk' services, however I think I have disabled/uninstalled something to do with wifi suitable because when I restarted my computer I got this symbol for the internet:
  In the networks Control Panel it says this:
  
  And in settings > Wireless it says this:
  

  Internet works fine when connected to an ethernet cable (as I am now) and used to work fine on wifi.

  In recent days I tried a lot of things suggested on the internet in an attempt to solve this problem, however, none of them have worked:

  I've updated my BIOS and all the network drivers.

  I tried to update my PC but my computer turns off about 80% of refreshing :/ and now when I try to refresh again I get error 80070490.

  I tried the Windows Network Diagnostics and got this:

  

  When you try to manually connect I get this:
  

  When you try DISM.exe I get this:

  Network connections:

  Device Manager:

  ipconfig/all:

  I don't remember the exact name of the procces, but the LAN process is running.

  DHCP is also on:

  

  I use AVG and zone alarm and tried to disable their aswell as firewall.

  Please help, thanks in advance.

  YES! I finally found the solution! It was zone alarm :/ My internet used to work fine with zone alarm, so I do not understand why, but when I uninstalled my internet started working normally again.

• Satellite Pro M35E - error graphics card 10 - where to find the graphics driver?

  Hi guys hope you can help.

  I have a Satellite Pro M35E PSM35E-002EE-AR
  My video card plays up there 10 saying error this device cannot start my screen. He has lines on the screen.
  First of all, I can t find drivers for my video card so that I can install them again.
  So where can I find them?
  NVIDIA takes back me to Toshiba and Toshiba doesn t seem to have Web sites here.

  My second question is; to install the drivers again will correct the error 10?

  All welcome responses
  Thanks in advance

  mhh a strange behavior

  in any case

  Here the driver
  http://Support1.toshiba-tro.de/Tedd-files2/0/display-20080421144816.zip

  I don't know if the driver will fix this problem... but try it and you'll see.

  CU