Profile of MDM installation fails outside our local network

Similar Questions

• 5 view customer disconnects immediately outside the local network

  I work with the 60 day trial of view 5.0 5.0 w/ESXi. Everything is configured and works well inside the LAN, but we have not been able to connect outside the local network. We have a single sign-on server that is associated with a single security server. All the rules of firewall, file server and configuration procedures correspond to installation and administration guides. Try to connect via PCoIP from a variety of devices.

  The client connects, check credentials, allows you to choose a desktop, opens the window of the office, but him freezes and shut up saying: 'the connection to the remote computer is complete.' This happens every time.

  Anny suggestions?

  Hello

  First of all, are you just a black screen that stays there for about 30 seconds then it closes with error? It is usually a problem with the connection to PCOIP. Could be firewall rules blocking a port, it could be the NATs. Security servers can be hard enough for the Setup program.

  First check and see if you can connect by using the view client and RDP Protocol. Also, make sure that through the firewall, the Security Server can access the VLAN Office on tcp/udp 4172. Search for NATing in the external firewall and that your security server for installation of the connection to the server has the external IP address that there are listed (not the internal IP of the server security).

  If you have a team network to talk to them and see if they can track packages. Look at the logs on the server and Security Office.

  You don't have to worry about this error. Security Server does not need to be on the field, in fact it should not really be on the field. It somewhat defeats the purpose of having a security server. The client has authenticated the username and the password and is spent on the desktop then ok. If the Office is unable to connect the user for a reason, then they will be left on the desktop windows request a user name and a pass.

  Hope this helps

  Phil

• WRT1900AC of external storage outside the Local network

  I'm trying to set up my WRT1900AC router to access a USB attached as an external storage device. I can access the drive when I'm on the LAN, but I had no success accessing outside my local network. I enabled the FTP option in the section of external storage. With the FTP option is enabled, it then points me to the IP address that my cable modem ISP attributed to the router (192.168.0.2). Obviously this won't work from the outside world because it is not the IPV6 address. I install my modem cable to the port before 21-the 192.168.0.2 address and tried to access from outside by using my address IPV6 (ftp://77.XX.XXX.XX:21) but it will not connect. I was hoping someone could point me in the right direction, as I obviously don't do something here.

  Hello, Steve99888. You must configure the settings of folder first. Check out this link.

• Cannot access our local network Web site

  We have just added a Cisco ASA5510 to protect our network. Everything works except that no one in the local network can access our imail we site. Web site points to one of our public IP address, x.x.x.35 (we have access to the web site of outside and we can just? t do inside even after the addition of the ASA). Is it possible inside computers can access our web site using the public IP address? If not, my another option is to set up a record DNS pointing to the web site, for example 192.168.0.213 = www.chicagotech.net (name of the network domain is chicagotech.local)? I can? t find a way to do it. Any suggestions?

  This is the Cisco ASA configuration.

  ASA Version 7.0 (5)

  !

  ciscoasa hostname

  domain default.domain.invalid

  names of

  DNS-guard

  !

  interface Ethernet0/0

  nameif outside

  security-level 0

  IP address x.x.x.38 255.255.255.248

  !

  interface Ethernet0/1

  nameif inside

  security-level 100

  IP address 192.168.0.250 255.255.255.0

  !

  interface Ethernet0/2

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface Management0/0

  nameif management

  security-level 100

  no ip address

  management only

  !

  passive FTP mode

  out_to_inside list extended access permit tcp any host x.x.x.34 eq www

  out_to_inside list extended access permit tcp any host x.x.x.34 eq 8080

  out_to_inside list extended access permit tcp any host x.x.x.34 eq 8383

  out_to_inside list extended access permit tcp any host x.x.x.35 eq www

  out_to_inside list extended access permit tcp any host x.x.x.34 eq smtp

  out_to_inside list extended access permit tcp any host x.x.x.34 eq pop3

  out_to_inside list extended access permit tcp any host x.x.x.34 eq 3389

  out_to_inside list extended access permit tcp any host x.x.x.34 eq 13001

  out_to_inside list extended access permit tcp any host x.x.x.35 eq 13001

  out_to_inside list extended access permit tcp any host x.x.x.35 eq 3389

  out_to_inside list extended access permit tcp any host x.x.x.35 eq pop3

  out_to_inside list extended access permit tcp any host x.x.x.35 eq smtp

  out_to_inside list extended access permit tcp any host x.x.x.35 eq 8383

  pager lines 24

  asdm of logging of information

  management of MTU 1500

  Within 1500 MTU

  Outside 1500 MTU

  ASDM image disk0: / asdm505.bin

  don't allow no asdm history

  ARP timeout 14400

  Global interface (10 outside)

  NAT (management) 10 0.0.0.0 0.0.0.0

  NAT (Inside) 10 0.0.0.0 0.0.0.0

  static (inside, outside) x.x.x.34 192.168.0.213 netmask 255.255.255.255

  static (inside, outside) x.x.x.35 192.168.0.112 netmask 255.255.255.255

  Access-group out_to_inside in interface outside

  Route outside 0.0.0.0 0.0.0.0 x.x.x.33 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00

  Timeout mgcp-pat 0:05:00 sip 0:30:00 sip_media 0:02:00

  Timeout, uauth 0:05:00 absolute

  If inside users try to connect to the public IP address then, it won't work. How do fix you this depends on where is your DNS server.

  If inside users use a DNS server on the external interface, and then you can have the ASA change the DNS response during its passage through the ASA. Just add the option "dns" on the end of your static controls so that they resemble the following:

  static (inside, outside) x.x.x.34 192.168.0.213 netmask 255.255.255.255 dns

  static (inside, outside) x.x.x.35 192.168.0.112 netmask 255.255.255.255 dns

  If inside users use a DNS server on the inside, but this server responds with the public IP address, so you'll have to change within a file so that it points to your local IP address 192.168.0.21x. No other way around it, I'm afraid.

• Cannot ping outside my local network

  I have a computer, I'm trying hard; It runs Windows XP Professional.  I can't access the Internet from this computer; only local resources.  I ping the LAN behind my router, and other computers on the local network have no problems of access to the Internet.  I can ping the local computers and my router from this computer by IP address or name, I can ping and the local host (127.0.0.1).  She receives a valid IP address of the router, which works as a DHCP and DNS server seems to work.  I tried to change the DNS servers in the TCP/IP configuration to use OpenDNS, just in case there was a problem with my ISP, but given that the other computers on my local network were not seen the question, I don't have to understand that it would make a difference.  It did not help.  I tried to disable the firewall in the case who was blocking Internet Explorer or another browser to work.  I tried ipconfig/flushdns, released and renewed the IP address, the only thing that I is not done yet is netsh commands to rebuild the TCP/IP stack, but since I can ping, I don't think that is the question.  I ran Malwarebytes and an updated version of AVG anti-virus, who both turned up nothing.  I can not get the system restore to restore a date known working restore, it fails, there is nothing in the startup that seems suspicious, there is nothing pointing to a proxy server redirecting traffic, and I'm out of ideas.  Anyone think of something that I missed?

  Hello

  Ping is a level more low action Network.

  Try to install the drivers of old that you can find and do a complete refresh.

  WinSock and TCP/IP update.

  Type Cmd in the search text box.

  Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

  Type netsh winsock reset at the command prompt and press the Enter key.

  The same processes to refresh the TCP/IP replaces the command typed with.

  netsh int ip reset press enter

  ipconfig/flushdns, press enter

  Restart your computer.

  PS Si the IP address starts with 169.xxx.xxx.xxx is not a valid IP address.

• Cisco router access outside the local network interface

  Hi all!

  I have Cisco router 892 (c890-universalk9 - mz.154 - 3.M4.bin) with firewall area and based on routing strategies.

  Everything works fine, but now I need to have the ability to access external router interface IP LAN addresses.

  For example, I PAT 192.168.4.1 port 8443 to the outside interface IP (93.93.93.2 for example) and I need to check LAN 93.93.93.2:8443.

  ! PAT:

  IP nat inside source static tcp 192.168.4.1 8443 93.93.93.1 - extensible 8443 SDM_RMAP_1 road map

  ! DynNat to the internet:

  IP nat inside source overload map route SDM_RMAP_1 interface GigabitEthernet0

  ! Routing policy

  SDM_RMAP_1 allowed 10 route map
  corresponds to the IP 101
  match interface GigabitEthernet0

  ! ACL 101 for routing policy

  access-list 101 deny ip 192.168.3.0 0.0.0.255 192.168.111.0 0.0.0.255
  access-list 101 deny ip 192.168.3.0 0.0.0.255 172.16.192.0 0.0.0.255
  access-list 101 deny ip 192.168.3.0 0.0.0.255 172.16.177.0 0.0.0.255
  access-list 101 deny ip 192.168.3.0 0.0.0.255 172.16.61.0 0.0.0.255
  access-list 101 deny ip 192.168.3.0 0.0.0.255 172.17.19.0 0.0.0.255
  access-list 101 deny ip 192.168.4.0 0.0.0.255 192.168.111.0 0.0.0.255
  access-list 101 deny ip 192.168.3.0 0.0.0.255 host 172.16.194.100
  access-list 101 deny ip 192.168.3.0 0.0.0.255 10.0.0.0 0.255.255.255
  access-list 101 deny ip 192.168.4.0 0.0.0.255 10.0.0.0 0.255.255.255
  access-list 101 deny ip 192.168.4.0 0.0.0.255 host 172.31.255.1
  access-list 101 deny ip 192.168.4.0 0.0.0.255 host 172.16.194.100
  access-list 101 permit ip 192.168.3.0 0.0.0.255 any
  access-list 101 permit ip 192.168.4.0 0.0.0.255 any

  ! ACL on the external interface:

  plug-in software component gi0 extended IP access list
  allow an ip
  allow icmp a whole

  ! External interface

  interface GigabitEthernet0
  Description $ETH - WAN$
  IP 93.93.93.1 255.255.255.240
  IP access-group gi0-in in
  NAT outside IP
  IP virtual-reassembly in
  EXTENT of the Member's area network security
  IP tcp adjust-mss 1452
  automatic duplex
  automatic speed
  card crypto SDM_CMAP_2

  ! Inside DMZ interface vlan:

  interface Vlan4
  IP 192.168.4.254 255.255.255.0
  IP nat inside
  IP virtual-reassembly in
  security of the members of the DMZ
  IP tcp adjust-mss 1452

  ! Allow outbound traffic to DMZ to Internet:

  Allow_All_ACL-DMZ extended IP access list
  allow an esp
  permit tcp host 192.168.4.1 host 192.168.111.2 eq 1521
  refuse the 192.168.4.0 ip 0.0.0.255 192.168.111.0 0.0.0.255
  refuse the 192.168.4.0 ip 0.0.0.255 172.17.19.0 0.0.0.255
  allow icmp 192.168.4.0 0.0.0.255 any
  ip licensing 192.168.4.0 0.0.0.255 any

  ! Allow incoming traffic from the Internet to DMZ:

  WAN_DMZ_ACL extended IP access list
  allow tcp any a Workbench
  permit tcp any any eq ftp
  permit tcp any any eq 990
  permit tcp everything any 51000 53000 Beach
  permit tcp any any eq 995
  permit tcp any any eq 465
  permit tcp any any eq www
  permit any any eq 443 tcp
  allow icmp a whole
  allow an esp
  permit any any eq non500-isakmp udp
  host ip 212.98.162.139 permit 192.168.4.0 0.0.0.255
  IP 81.30.80.0 allow 0.0.0.255 any
  IP 192.168.111.0 allow 0.0.0.255 192.168.4.0 0.0.0.255
  IP 172.17.19.0 allow 0.0.0.255 192.168.4.0 0.0.0.255
  host ip 172.16.194.100 permit 192.168.4.0 0.0.0.255
  host ip 172.31.255.1 permit 192.168.4.0 0.0.0.255
  permit ip host 172.31.255.1 172.17.193.100
  refuse an entire ip

  ! Focus on the area of firewall:

  type of class-card inspect entire game DMZ_WAN_CLASS
  match the group-access name DMZ Allow_All_ACL

  type of class-card inspect entire game WAN_DMZ_CLASS
  match the name of group-access WAN_DMZ_ACL

  type of policy-card inspect DMZ_WAN_POLICY
  class type inspect DMZ_WAN_CLASS
  inspect
  class class by default
  drop

  type of policy-card inspect WAN_DMZ_POLICY
  class type inspect WAN_DMZ_CLASS
  inspect
  class class by default
  drop

  the DMZ security

  
  area WAN security

  Security WAN_DMZ of the pair area source destination WAN DMZ
  type of service-strategy inspect WAN_DMZ_POLICY
  destination of DMZ_WAN source DMZ area pair WAN security
  type of service-strategy inspect DMZ_WAN_POLICY

  Maybe someone can help me to make Cisco to allow ports outside LAN using a NAT?

  I did this on Mikrotik easily = |

  It is due to the fact that they do not allow "hair pinning" by default, once this is configured, it will work.

  Martin

• Need help about Remoteapp outside the local network (2008 R2 Std)

  Hello

  We have installed and configured all the 4 services (RDGM, RDLM, RDWA, RemoteApp Manager). Inside the lan, all published remote applications work correctly but

  When accessing the log on credentials wan are invited on several occasions.

  We use a self-signed certificate created by the remote application server. We have installed the certificate in the certification of approved root authorities store.

  Question-is it possible to access remote app on the wan via this free sign certificate or we need to purchase a SSL certificate?

  Thank you

  Laros

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• Sourcefire Defense Center Upgrade version (local installation) failed

  Hi team,

  I had a problem during the upgrade of our CME to 5.4.0.

  Alerts

  Task notification

  Task status of your version upgrade of defense Center S3 task installation Sourcefire 3D: 5.4.0 - 763 (local installation) failed in the sea 25 09:46:02 Nov 2015

  Could not update the State: DB connection has been lost prior: new loading database...

  Hi John,.

  This error appears rarely. It is a known issue: CSCze94563

  Reference: https://tools.cisco.com/bugsearch/bug/CSCze94563/?reffering_site=dumpcr

  I just edited the bug to contain more information. It may take some time to reflect it.

  The task status page can present the error above, however, the help > on of interface user page indicating that the system in question is running version 5.4

  You can also view the logs to confirm this.

  Cat/var/log/sf /<5.4_upgrade_directory>main_upgrade_script.log

  The last line should read "success, removed the upgrade lock.

  Thank you

  Guillaume

• MDM registration fails with "out of find CRL, unknown CA.

  I'll put up a few classes worth of iPads for a local school and a few problems getting iPads recorded on the Apple MDM server.

  We have a mac mini to the latest version of El Capitan and iPads to connect by using the domain name (theserver.mdm.theschool.edu).  The domain is registered and administered by a third party and they run the main site (theschool.edu), but they passed on to all applications on the subnet of mdm (i.e. *. mdm.theschool.edu to our LAN (ASM was able to communicate with our server using theserver.mdm.theschool.edu, so we know that it works). nslookup and the ping from inside the local network is theserver.mdm.theschool.edu without problem.)

  Because we cannot mess with the primary DNS for this project, I use the DNS on the mac mini and send all our subnet of mdm requests to this server.  All iPads use this server as a DNS server address and have no trouble accessing it. Any unknown applications are transferred to the primary DNS server.

  I created a domain in Open Directory for our local subnet (mdm.theschool.edu) and the captain the mini mac.

  When I try to save an iPad via the web site server, it fails and I only see it in the newspaper:
  Jul 22 15:23:21 salome xscertd-helper [2261]: could not find the CRL, unknown CA: F9D65C0B-42E7-4EBE-96A1-BB5F2EC0EF2C

  I use free free certificates.  CA in the message changes each time.

  I can download the certificate that I use for the iPad with success, just not register actually unit. I had a quick glance at all the certificates that I can see and they have all what looks like the correct CA in them.

  Where can I find more diagnostic information?  Why CA continue to change (corruption, something caused random data not specified...)?

  I could be wrong, but as I KNOW MDM will not work with free certificates, you need to get a certificate of push Apple related to one identifier Apple. You don't mention in your question.

  In addition, according to:

  https://help.Apple.com/ServerApp/Mac/5.1.5/#/apd05B9B761-D390-4A75-9251-E9AD29A6 1D0C

  "To use the Profile Manager as a service of mobile device management (MDM), OS X Server must have a static network address and a fully qualified domain name and may not be on an isolated network."

  C.

• Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (973923 KB): the Installation fails repeatedly.

  Hello

  Unfortunately, I can't get this update installed. It fails with error Code 643. I know, this isn't a specific error message, and I tried to follow the advice given here:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/89879c8d-a63e-436a-9FD5-6183e39d1ff4/

  But this file is not created.

  Moreover, I get an error with Logitech SetPoint and a side-by-side installation failed. These problems can be related to each other?

  Thank you very much in advance, Rob.

  Windows 7 64 bit, all the updates that are installed (with the exception of C++), AMD Phenom II X 4 945, Gigabyte MA-GA770-UDP3

  Hi Robseidel,

  1. did you of recent changes on the computer?

  2 are you able to install any other updates, outside this update?

  3. who was the last update installed on the computer? To check the update, open the window update page and click View installed update.

  Please let us know what you have already tried, it saved time at both ends.

  Just to confirm, did you follow the steps outlined in the article below for Windows Vista as the steps for Windows XP do not work with Windows Vista, and that's why there could be issues in the creation of the files.

  http://support.Microsoft.com/kb/958052

  If the steps in the link above didn't help then try the steps below and see if that makes a difference.

  1 restart the computer in safe mode (to restart in mode safe keep pressing F8 on reboot).

  2. click on the start menu and in the search box start type CMD.

  3. in the list right click on CMD, and then click Run as administrator.

  4. at the command prompt, type net stop cryptsvc.

  5 rename C:\windows\System32\Catroot2 Catroot2.old.

  6 open the C:\windows folder, and then rename the folder C:\Windows\SoftwareDistribution as SoftwareDistribution.old.

  7. at the command prompt, type net start cryptsvc, and press enter

  8 restart the computer in normal mode

  9. run updates and check if you are able to get the updates without any error.

  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Installation failed, cannot open documents

  Hey everybody,

  I wanted to just install Photoshop CS5 Extended. But at the end of installation, I get the following error:

  Exit code: 6

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 10 (s), 6 warnings

  WARNING: LocalizeFile: localized string not found for locale "de_DE" try to get for en_US

  WARNING: LocalizeFile: localized string not found for locale "de_DE" try to get for en_US

  WARNING: LocalizeFile: localized string not found for locale "de_DE" try to get for en_US

  WARNING: LocalizeFile: localized string not found for locale "de_DE" try to get for en_US

  WARNING: LocalizeFile: localized string not found for locale "de_DE" try to get for en_US

  WARNING: LocalizeFile: localized string not found for locale "de_DE" try to get for en_US

  ERROR: Failed to mount the disk image Volumes/Adobe Photoshop CS5/Adobe Photoshop CS5/payloads/AdobeCameraRawProfile6.0All/AdobeCameraRawProfile6.0All.dmg. Please check that the disk image is not damaged.

  ERROR: Failed to mount the disk image Volumes/Adobe Photoshop CS5/Adobe Photoshop CS5/payloads/AdobeCameraRaw6.0All/AdobeCameraRaw6.0All.dmg. Please check that the disk image is not damaged.

  ERROR: 2 unable to copy the file to ' / private/tmp/.tempdirieg9jcCq/Assets1/Legal/en_GB/license.html ' to ' / Applications/Adobe Bridge CS5/Legal/en_GB/license.html "error 0

  ERROR: 2 ARKCopyFileCommand command failed.

  ERROR: 2 failed to remove the copy of files in "/ Applications/Adobe Bridge CS5/Legal/en_GB/license.html" error 0

  Error: 2 push the command ARKCopyFileCommand

  ERROR: The following payload errors were found during the installation:

  ERROR:-Adobe Bridge CS5: installation failed

  ERROR:-Photoshop Camera Raw: installation failed

  ERROR:-camera profiles Installer: installation failed

  -------------------------------------------------------------------------------------

  It also crashes down when I try to open the files. Does someone of you has a solution to this problem?

  Greetings

  Hello

  Refer to the error "Exit Code: 6", "Exit Code: 7" | "» CS5, CS5.5

  Thank you

  Varun

• EMP 11.1.2.3 System Installer fails to install the Oracle DB, 32-bit and 64-bit Client

  Hello

  We are trying to do a fresh install of Oracle Hyperion EPM 11.1.2.3 on Windows 2008 Server R2.

  Its a standard deployment with a Foundation Server and an Essbase server.

  When you try to install on the server of the Foundation, the EPM System Installer fails to install Oracle database customers.

  The first Question we have is, we have decided using Microsoft SQL Server for the repository of Shared Services and therefore would like to know if it is safe to ignore this error and move on.

  The second question is, if we need the error pending, we want to know why the installation system fails. Looking at the newspaper, ORACLE_HOME is on something that is not valid or is longer than 128 characters.

  The Diagnostics show the below error message:

  NEWS: Will copy both pre and post copy copy files C:\Users\SA-ESS~1\AppData\Local\Temp\2\OraInstall2013-11-11_04-16-01PM/oracle.client_Administrator.properties

  INFO: Install Properties filename: C:\Users\SA-ESS~1\AppData\Local\Temp\2\OraInstall2013-11-11_04-16-01PM/oracle.client_Administrator.properties

  INFO: Value oracle.install.customdeinstallcommand %ORACLE_HOME%/deinstall/deinstall

  INFO: Oracle.install.customizedeinstall set to true

  INFO: The value oracle.installer.ORACLE_BASEvar ORACLE_BASE

  INFO: The value oracle.installer.LibPerms 0755

  INFO: Value oracle.installer.summary_expand_nodes NewLangs, Global, space, Langs

  INFO: The value oracle.installer.LibExtns .sl,.sl.11.1, .so,.so.11.1,.sl.1.0,.so.1.0

  INFO: oracle.installer.mandatorySetup set to true

  INFO: oracle.installer.useORACLE_BASE set to true

  INFO: Oracle.installer.removeallfiles set to true

  INFO: Oracle.installer.additionaltool_continue_onerror set to true

  INFO:

  Specify Home Details Page *.

  INFO: Setting the property "OracleHome (ORACLE_HOME)' ' D:\Oracle\Middleware\EPMSystem11R1\... \dbclient32'." Has received the value of the command line.

  INFO: Setting the property ' OracleHomeName (ORACLE_HOME_NAME)' to 'OraClient11g32_sa-essbaseapp '. Has received the value of the command line.

  INFO: Definition of the 'OracleBase (ORACLE_BASE)' property ' D:\Oracle\Middleware\EPMSystem11R1\...------'. Has received the value of the command line.

  GRAVE: The Oracle Home name is not valid. Oracle Home names must be 128 characters or less and contain only alphanumeric characters and underscores.

  INFO: The attention of unregistered Manager, using the features of the Super class

  INFO: The attention of unregistered Manager, using the features of the Super class

  INFO: User selected: Yes/OK

  INFO: Closing OUISetupDriver.JobExecutorThread

  GRAVE: [FATAL] [INS-10008] Session initialization failed

  CAUSE: An unexpected error occurred during initialization of the session.

  ACTION: Contact Oracle Support Services or view logs

  SUMMARY:

  - .

  See associated stacktrace #oracle.install.commons.util.exception.DefaultErrorAdvisor:1096

  INFO: Tips are ABORT

  GRAVE: Unconditional exit

  INFO: Add ExitStatus FAILURE to exit status set

  INFO: Find the status of output more suitable for the current application

  INFO: Exit status is - 1

  NEWS: Stop Oracle Client install

  I got my answer in the newspaper.

  The ORACLE_HOME_NAME is the question.

  Our deployment account has a hyphen -, and so the Yes program is unable to initialize.

• Language Pack Installation failed

  I'm running Win 7 Ultimate x 64. I tried to install as administrator, the simplified Chinese language pack. Installation, after several hours of installation time, failed. The update is now listed in my history of editing, but not in the installed updates. He has never offered again. I can go to the region and language in Control Panel and see that simplified Chinese is offered, although I have never selected, disconnected and then connected back to see if it works. Is it possible to remove the update failed? I really don't want to use the system restore and having to reinstall other programs.

  Thank you in advance for any help provided.

  It is the responsibility and the duty of everyone to help the most disadvantaged and the unfortunate among us.

  Hi C.B,.

  If the update for language pack installation failed then you won't find it under installed updates.

  If the failure of Chinese language pack update is available in the update history, there is nothing wrong, history of the update gives you only the information about installing updates on the computer.

  You can not only remove the update failed update history; If you want to remove the update failed, then you will need completely erase the history of the update.

  In the regional and language settings where do you find the Chinese in option?

  If you do not want Chinese language on the computer, then you can uninstall, check if it is available in the installed language.

  (a) open region and language by clicking on the Start button, click Control Panel, clicking clock, language, and region, and then by clicking on the region and language.

  (b) click the keyboards and languages tab.

  (c) under display language, click install/uninstall languages, and then follow the steps. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Install or change a display language

  http://Windows.Microsoft.com/en-us/Windows7/install-or-change-a-display-language

  If the Chinese language is not available in the installed language, then you must remove the keyboard for input.

  (a) open region and language by clicking on the Start button, click Control Panel, clicking clock, language, and region, and then by clicking on the region and language.

  (b) click the keyboards and languages tab and then click Change keyboards.

  (c) under installed services, select Chinese and click on delete.

  Add or change an input language

  http://Windows.Microsoft.com/en-us/Windows7/add-or-change-an-input-language

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows cannot load the locally stored profile. Possible causes of this error include insufficient __security rights or a damaged local profile. If the problem persists, contact your network administrator. __

  Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a damaged local profile. If the problem persists, contact your network administrator.
  My documents are 'hidden' also

  xpconfused,
  This article explains how to solve problems with a corrupted profile. Article  After return your results. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP software installation fails on win7 pc

  I have donwloaded the software driver for HP Photosmart C5180 HP Web site. "" Soon after the installation fails with the message: System cannot find file ' C:Users\\AppData\Local\Temp|7zS7F2D\Setup\hpzpnpModelos Israel "and something more, which is not displayed full. Then it stops. Anyone who can help me?

  Hello vtec2014,

  Welcome to the HP Forums! I understand the Photosmart C5180 software fails, and you receive a message error "system cannot find file". Please follow this post to SuperMario1, this will solve your problem.

  I would like to know how your progress.

  Impatience on your part.