Profile of user cannot open a session

Similar Questions

• What should I do when I tried to log in a user's my profile has not cannot open a session. What should I do

  I am the administrator and my husband is too.  We have it so that we can have passwords.  On the computer, I worked last night and today we are unable to connect to its parameters.  "Its States, the user profile failed cannot log" I need to get the job done so I need to go fast.  We have protection on our computer.  Never had this problem.    PLEASE HELP US.

  Hello

  You can try the following.

  Shut down the PC.  Tap away at f8 that you start the PC to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the PC.  Tap away at f8 that you start the PC to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  Kind regards

  DP - K

• OBIEE 11g migration: weblogic user cannot open a session in analytics

  Hello

  We simply migrate obiee 11g successfully from one server to another server.

  but now after the migration we are not able to log into the analytical page with weblogic user.

  This weblogic user is able to connect to the Console and EM, but not in the analytical page.

  Any user can connect to the console, EM and analytics page.

  so far,.

  We tried trobleshooting with the following links,

  1. Weblogic

  2. also tried with deleting user weblogic and yet once created weblogic.

  but no luck.

  Note: I noticed when we migrated the users and roles from one server to another, then the user weblogic worked very well, could even connect to the Analytics page.

  But as soon as we have migrated and deployed RPD, only since then, while we are facing this problem.

  have idea on this.

  TIA

  Refresh GUID will help u here

• administrator cannot open a session

  Administrator cannot open a session, each time I have enter password, returns, "THE service USER PROFILE SERVICE has no connection. User profile cannot be loaded. Help!

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot open a session

  I just start a new laptop and trying to get Outlook, Hotmail, I downloaded Live Essentials. In the context of that Skype has been installed. I already have it on my desk top so no not anything would be a problem.

  I am at the point of connection and when I used the same log-in under my desk, did not work. So clicked on password forgotten, changed. Tried to log in again, not good. Keeps asking for my Skype name. Have no idea what it is other than the login name or the name that appears at the top of the page on my desktop.

  No matter what I have / use, cannot open a session.

  Don't know what other information need. Give me an idea what to do.

  What exactly is the version of Skype installed on your laptop? In Skype goto help-> on Skype.

• l had express outlook XP with Firefox. cannot open a session to get or receive emails any ideas?

  Outlook express forum

  l had express outlook XP with Firefox.  cannot open a session to get or receive emails any ideas?
  As far as I KNOW, Hotmail has failed on OE for quite awhile.
  http://support.Microsoft.com/kb/878462
   
  For the best advice, Hotmail should ask in this dedicated forum.
   
  Windows Live Solution Center Hotmail Forum
  http://windowslivehelp.com/forums.aspx?ProductID=1

• type it the password of the account, it says the user profile service Service failed the profile logon.user cannot be loaded.on from the system restore, it said: System Restore could not start. What should I do? __

  type it the password of the account, it says the user profile service Service failed the profile logon.user cannot be loaded.on from the system restore, it said: System Restore could not start. What should I do?

  Have a look here:
  http://support.Microsoft.com/kb/947215
  or here:
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

• My CC icon, I cannot open a session.

  My CC icon, I cannot open a session. Says "Log In to continue" I connect with my credentials and he said "You have been logged Out", so I have everything again. It's a turning circle. Anyone else having this problem?  My connection works fine online.

  HELP PLEASE!

  Sign by sign in http://forums.adobe.com/thread/1450581?tstart=0 can help

  - and http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html

  - and the "loopback" https://forums.adobe.com/thread/1504792

• abuse of user profile is not the opening of session

  I must have deleted or damaged my profiles from user accounts in error and now I cannot create new accounts, but cannot log on to them.
  I got the error msg ' user profile services doesn't have the logon - user profile can not beloaded.
  I have an administrator account which is the only one who opens a session.
  I tried to solve the problem by the following methods 1 & 3 of article KB 947215 Microsoft, but without success.
  Method 2 has not been possible, because I could not log into the new account that I had created, and it was also nowhere in my files or system even after using the search option.
  There, anyone know how I can fix this and be able to log on the new accounts.
  Is it possible to copy from another computer user profiles and paste them into my account?
  Thank you.

  Hello

  Try these steps

  that article KB 947215 is also included if you missed something

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Cannot open a session to the newly created user account

  I created a new standard user account via account management/accounts/user control.  When I log into the admin account and try to connect to the newly created account, I get the error message "the service user profile Service has no logon" "could not load user profile.  Click OK and it disconnects.  I can still log on to all the other 5 accounts that I created after I implemented this new laptop (preinstalled with windows 7).  When you click on a new account the first time, the system should establish the office and create the user records.

  I went into the Admin account and checking the application event log.  Event ID 1509 "Windows cannot copy file C:\Users\Default\ to the C:\Users\New Test Account\ location.  This error can be caused by insufficient security rights network problems. "DETAIL - access is denied.

  I solved my problem.  The index was at the event journal entry.  The permissions on the folder C:\Users\Default screwed up. (not sure how that happened).  I compared the authorization for this folder on my laptop win 7 with permissions for the same folder on my computer vista laptop.  Computer laptop win 7 has a few additional entries.  I deleted them and now I can create and open a session on new accounts on the laptop win 7.

• AMINISTRATOR CANNOT OPEN A SESSION

  As an administrator, I am unable to connect because of the message "the service user profile service has no log on." Unable to load the user profile.

  I tried to start in safe mode, but it will not do this, always arriving at the windows logo.

  I edit the registry but cannot take the step of renaming.

  I have tried system restore but no go.

  In short, any attempted that requires the administrator password is not allowed.

  Hi David,

  Thanks for posting your query in Microsoft Community.

  It's a shame that you can't sign in because of the error, and I appreciate the efforts made in the patches that you tried. However;

  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 how to back up and restore the registry in Windows.

  Since none of the fixes that you tried, worked, I would ask you to refer following steps and check.

  Also I suggest you to activate the administrator account by default on your computer from WinRE and see if the problem is resolved.
   
  You must have the Windows 7 DVD, start the computer to Win from the elevated command prompt, you can follow these steps:
   
  1. use the DVD Windows 7 to start the computer from Windows Recovery (WinRE).
  2. in WinRE, open a command prompt. To do this, follow these steps:
  On the screen to install Windows, select the language to install, time and currency format and keyboard or input method options and then click Next.
  3. click on repair your computer.
  4. click on 7 installation you want to repair, and then click Next.
  5. click on command prompt.
  At the command prompt, type the following command and press ENTER:
  lusrmgr.msc in the online search and press enter

  NOTE: This file is located in C:\Windows\System32\lusrmgr.msc
  1. open the User Manager and local groups.
  2. in the left pane, click the users folder.
  3. in the middle pane, right click Administrator, and then click Properties.
  4. to activate the account administrator of Buit-in-
  (a) clear the account is disabled box.
  (b) proceed to step 6.
  5. to deactivate the account administrator of Buit-in-
  (a) check the account is disabled box.
  6. click on OK.
  7. close the windows local users and groups.
  8. close the session, and you will now see the built-in Administrator account log additional icon (active) or removed (disabled) to the log on screen.
   
  NOTE: Click on the Administrator icon to open a session the built-in Administrator account.
   
  Now of the foregoing provided steps that you need to check if you are able to solve the problem, if you are able to resolve the problem with the default Administrator account, then you must follow the step provided to create a new user account and check the question below.
   
  Create a new user profile.
   
  You must create a new user account and check the question of do you need to follow the steps below.
  a. open accounts to user by clicking the Start button, clicking Control Panel, clicking user accounts and family safety, and then clicking user accounts.
  b. click Manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. click on create a new account.
  d. type the name that you want to assign to the user account, click an account type, and then click create an account.

  Look for the question, for additional on this issue references, you can consult the forum link provided below.
   
  IF you still experience the problem, you can follow the link provided below to fix the damaged user profile.

  Difficulty of a corrupted user profile

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Software Adobe reader tries to open my browser and other programs. Cannot open a session

  What I am trying to open displays a box saying software adobe reader adobe reader cannot open file. This happens even with my browser. I think somehow something has changed on my computer, but I can't understand. I go to my guest account and everything works fine.

  Executable file associations have been lost somehow. Assuming that. EXE (executable files) and. LNK (shortcut): download it. LNK and (if necessary). Difficulty of recording association EXE file types here:

  Difficulties of file Association for Windows 7:
  http://www.Winhelponline.com/blog/file-Asso-fixes-for-Windows-7/
   
  (FYI, the REG file is a file in plain text that you can open with Notepad, where you need to check its contents before the merger).

  How to display a warning Message When users try to edit Vista and LNK file Association in Windows 7:
  http://www.Winhelponline.com/blog/show-warning-modify-lnk-Association/

• 'Consumer IR Devices' does not not and cannot open a session

  Hey guys. I just bought a HP with windows 7 64 bit. I'm going to turn on and everything is ready a problem! my screen is all pixelated and when I go to open a session on my screen goes black and I have to force disable it. I booted up in safe mode and I went into Device Manager and saw that "consumer infrared devices" was a problem. I turned off and rebooted but still the same problem. I tried to update the driver, but still the same problem. can anyone understand this?

  Hi UglyCustomer.

  1. what HP model do you have?

  2 you have recently purchased the system, you have updated all the controllers? Any firmware?

  3 it seems you have a problem with infrared electromagnetic or CIR. He's probably the drivers.

  Thus, the best option will be to go to this site web http://welcome.hp.com/country/uk/en/support.html

  Type your model number and update all the drivers. Chipset Audio 2 1 3 Graphics 4 CIR.

  Good luck :)

  Span1shUk

• I for got my iam password cannot open a session now and in my system there that no other administrator accounts are available. How to connect

  I forgot my password iam unable to open a session now and in my system, there is that no other administrator accounts are available. How to connect

  I forgot my password iam unable to open a session now and in my system, there is that no other administrator accounts are available. How to connect

  As you go now, having a spare admin account is a very practical thing - if you think of it in advance. Fortunately, there are many other options built into Windows to help you out of this situation:
  • Restart the computer with your Windows repair CD, then use system restore to set Windows in a few days (only works if you have recently changed the password).
  • Log in as administrator mode without failure, then reset the password for your existing account (the password is usually empty).
  • Insert your flash drive USB with the password key file (only works if you have taken the time to create such a key file).
  • Use the password indicator (works only if you have created a hint and if it's good enough to allow you to guess the password)
  • Check your paper files (works only if you threw down the password somewhere)

• Cannot open a session - service user profile Service has no logon. User profile cannot be loaded.

  I've seen suggestions to login in safe mode and do a system restore from a known point until the problem occurred. Whoever did this and if yes he succeeded?

  How do you get into safe mode and makes a potential problem for a novice?

  Good reading this post which explains things - http://answers.microsoft.com/en-us/windows/forum/windows_7-security/cannot-load-profile/89ca2661-c48c-4c06-84d6-ee0c5041cd02 and follow the related links.