Profile of user in windows vista does not load, what should I do?

The family member profile, will not record could you please put a solution to this promblem.

Hello

1st thing to try is the system in safe mode restore to before the problem

http://www.windowsvistauserguide.com/system_restore.htm

Windows Vista

Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

If that does not solve it read more

read the tutorial below

http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

The user profile Service has not logon. User profile cannot be loaded.

http://support.Microsoft.com/kb/947215#letmefixit

Your user profile was not loaded correctly! You have been logged on with a temporary profile.

http://support.Microsoft.com/kb/947242

If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

Tags: Windows

Similar Questions

  • Why Windows Vista does not load user profile?

    When logging on it says unable to load the user profile, but the profile is there when I log in Administrator account, how do I recognize my account that I used to use? Everything worked fine until I went to reboot my Dell Vosstro 220, running Vista SP2 with all latest updates... He went to the Startup Repair, and after awhile, I was dirrected to restart the computer. When it restarted, it went to a temporary user profile named after one it starts normally, but there was 3-0 and temp after the profile. So the desktop icon were almost all gone and when you run a temp profile nothing is saved in it when you use... I've logged on to the administrator account and under C:\computer\users my account, I used to use with 2 temporary accounts. One was exactly like my normal account (mountain), but with temp000 after her. I went to Microsoft Answers and he said to go to regedit and find the profiles under machine\software\microsoft \windows NT\profiles and change the name of the supposely accounts 2 so it would not load the Temp account. I followed the instructions to a T and everything is OK except that now it does not load the Temp file, it just says: windows could not load the user profile. I have to hit Control, Alt, delete to bring up the Task Manager and then type Administrator and password that works very well. When I click on administrator, it displays the screen with all that on the computer. MountainMan used to be there under administrator, but he disappeared. If I go down to users in a subcatigory under computer and users it lists all of the accounts that I should be able to access. All the information is there, it doesn't seem right to see as an account profle to load up. I've always had it set to start on MountainMan account without password. Now it takes forever to load the administrator account. It must also be typed in each time instead of remember accounts. How can I get MountainMan load again? The info is there, but he doesn't seem to know the location more. Even when I type in MountainMan it just says unable to load the user profile. I don't know if typing in the name of the account is the same problem or if I have 2 problems. I appriciate any help to correct this situation. Also just FYI, I deleted temporary files after changing names, in which case they were confusing.

    Hi James,

    1. When you created a new user account, have you configured it as an administrator?

    2. When you connect to the old user profile you are able to view your data?

    You can check out the following link and check:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-files/how-do-i-change-folder-and-file-permissions/465f2b42-63dd-4486-8dd1-c870290efeed

    The above link contains third party links.

    Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    For more information, please consult the following link:

    Troubleshoot "access denied" when opening files or folders

  • Windows Vista does not load all the black white backlit display.

    I'm repairing computer of my aunt. It's a laptop gateway M-6320. Windows Vista. It loads the bios and goes through the MAIL. After the POST, it just goes to a screen backlit black white with no mouse and nothing happens.

    Tried to change the boot order to boot from the cd first and put the disc of windows 7 in to run a repair (I don't have a vista cd), but it does not always load. everything sounds like it turns on and works fine. the dvd sounds like it runs for a few seconds. I also tried to boot from usb with windows 7 there. still won't load what it is. I took out the battery tested cmos it is 2, 5V. I think it was. still nothing. I left the computer for a whole night. still nothing. I changed the hard drive even though it sounds like it's working. still nothing. I even tried a windows xp cd in the freak chance, it was a bad cd. and nothing is connected to the computer while I'm trying to start. He's not going for advanced options or to try safe mode.

    I also tried to put the memtest on USB, but it will not load anything from him even with usb as the first boot option. and I tried different usb drives also.

    I can't figure what's wrong... my only thought is that the bios is corrupted or the RAM is bad. Anyone have any ideas? Oh and the bios is Phoenix

    Hello

    Since you've already tried all the troubleshooting steps, including booting from a Windows 7 disc to repair the Windows installation. If all else fails, then I think that
    It's a hardware problem. I suggest you contact the manufacturer of the laptop computer or take it to a tech store to get help.

    Kind regards
    Afzal Taher - Microsoft technical support.
    Visit our
    Microsoft answers Feedback Forum and tell us what you think.

  • Computer HP laptop window vista does not load please help

    someone asked this question and I have the same problem!

    I have a laptop HP who have dirtied pre-installed Vista and for some reason after installing automatically 3 updates the other day, he is not now charge up. The laptop is plugged in so it can configure 3 updates without failure (due to something like battery dying).

    When the laptop turns on, it gives me two options:
    • Start the reboot system (recommended)
    • Start Windows normally
    If I click on 'Launch Startup Repair', he comes back to do the same screen with them two options and when I click on "Start Windows normally", the laptop everything restarts and then return to this screen.
    Thus, F8-ing it does not help either - it gives me options like computer repair, Mode safe mode, last known good, etc... but none of these helped either.
    I looked around online for a solution, but most say on the use of the Vista installation CD, but the operating system is installed on a partition on the laptop (also there are files on what I would come down)... However I do not know if I can get it to boot on the installation partition either
    I tried F8, F11, F12 and nothing works

    If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use:

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Data recovery:

    1. slave of your hard drive in another computer and read/save your data out there.

    2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

    3 Alternatively, use Knoppix Live CD to recover data:

    http://www.Knopper.NET/Knoppix/index-en.html

    Download/save the file Knoppix Live CD ISO above.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://isorecorder.alexfeinman.com/isorecorder.htm

    Download the Vista software from the link above.

    After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

    Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

    Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1st in the boot order.

    Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

    When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

    Click on the icons of hard drive to open and to understand which drive is which.

    Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

    Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

    There is no Vista free download legal available.

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

    See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

    Normally, you have to press F10 or F11 at startup to start the recovery process...

    Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

    See you soon.

    Mick Murphy - Microsoft partner

  • Windows Vista does not load on Equium P300-16t?

    Help!

    P300 for my daughter does not windows once a CF (containing only JPEG Images) flash memory card has been inserted into a USB port and removed when starting up.
    I get a windows error recovery page that says a recent hardware or software change is prevents the loading of windows.
    Two options are given 1. Repair launch 2. Start windows normally. Neither will launch windows.
    I can get the "safe mode" screen when I press F8 at startup upward. When I try to start in safe mode it hangs just after 10 seconds or more.
    I can access the BIOS screen by pressing F12 and default configuration value. Always not load Vista.

    I have lost the discs to restore that have been made on the first day, and there is data on the hard drive that has not been saved! So I hope that there is an easy solution for this.

    Hello

    I doubt you could disable in the BIOS.
    But you can check if a USB option in the BIOS that would help you to disable USB ports.

    Otherwise, you could try to reinstall the operating system by using the disk HARD recovery option.
    FIR this press F8, and then choose computer repair mu, then choose HDD Recovery.

    But this process will format the C partition and you lose the data that was stored on C

  • Windows Vista does not load

    my windows vista computer will not start, when loads of computer it offers the ability to start windows normally, if I try that it loop back to the error message, the other option which is startup repair does not work properly, the repair start gives me the option to repair the operating system, but the operating system does not appear on my screen , and the other option it gives me is to delete all my personal documents. I tried to access safe mode but it does not give me the possibility of and I have an anti virus that scans everything that I have download. I don't got no recovery disk when I bought the computer and I don't have back ups for my computer because when I tried the computer would not be complete. I don't think I have recovery points on my computer because they do not work properly when I tried to be

    Hello

    Before we get this problem resolved, I'd appreciate it if you could answer the following questions.

    (1) have there been recent changes to the computer before the show?

    (2) what is the message error full pull you while you try to load in Normal mode?

    I suggest you follow the given steps and later a update on the State of the question.

    Method 1: Check if the problem is caused by some faulty devices on your computer. I suggest that you disconnect all external devices except the mouse and keyboard to your computer and check if you can able to boot.

    Method 2: What to do if Windows does not start correctly: http://windows.microsoft.com/en-US/windows-vista/What-to-do-if-Windows-wont-start-correctly

    Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

    Note: Try all the steps except the re - install the Windows Vista operating system.

    For all windows questions do not hesitate to contact us and we will be happy to help you.

  • Windows Vista does not load. I just see a black screen with cursor.

    Original title: lost

    Hi I have a problem starting from computer on windos vista prem pack I just get a blank sreen one little line in the upper left corner of the pulses completely baffled box someone help that

    Hello

    you don't say if you get a logo splash screen, loading of microsoft

    read this

    1st thing to try is a restoration of the system in safe mode

    http://www.windowsvistauserguide.com/system_restore.htm

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    If that does not read this information

    the link below is how to download and get a vista disk startup repair, which you can start from the

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    And make sure you only set the CD/DVD drive to be 1st in the boot order to boot from the drive that you have just made

    to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

    It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

    Change boot order it do dvd drive 1st in the boot order

    http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  • a yellow triangle with a critical problem message, windows vista does not load on a computer laptop dell studio

    Vista Windows failed to load on a dell studio laptop, the message appears with the critical error message, but then the screen turns white after auto restart, no loading of windows. What can I do

    http://support.Dell.com/support/eDOCS/systems/WS340/en/UG/DIAGS.htm

    Try the above balance sheet of Dell Diagnostics, using F12 to start this process.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    You can also follow these steps to try to solve your problems of boot.

     

    Restore point:

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

    Do Safe Mode system restore, if it is impossible to do in Normal Mode.

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    http://www.windowsvistauserguide.com/system_restore.htm

    Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

     

    If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use:

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Dell recovery options:

    http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

    Above is Dell to reinstall Vista from the DVD on your computer.

    http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

    And that way if you have a recovery partition on your hard drive.

    See you soon

    Mick Murphy - Microsoft partner

  • Windows Vista does not load, can not use Safe Mode, etc.

    Computer/laptop: Dell Inspiron 1525
    Running: Windows Vista

    I hope someone here can understand this, but it's a pretty serious problem for me for two days now.

    Two days ago I started my laptop that I normally have.  I did insofar as the office, and then once I tried to move my cursor autour, nothing happened.  Instead of using the cursor, navigation with the keyboard, I tried once more, nothing helps.  Everything was just frozen.  I didn't think much at the time, because I thought maybe it was just one of those random freezes, restart the computer fixed.

    But my problem got worse.

    After the next reboot, my computer is doing as much as the black screen with the Green loading bar with the words "Microsoft Corporation" under it... and where he remained for more than 6 hours.  It's exactly what it does whenever I restart the computer.  Just in the limbo of the permanent load.

    I held F12 on boot to the top and ran a diagnostic test, which revealed nothing wrong.  I tried all the options under F8, including all variations of Safe Mode, and once more, nothing has worked.  Even more frustrating is that the computer could not even finished loading command prompt when I tried "Safe Mode with command prompt."

    The only clue I've gotten so far was a blue screen randomly with a single line of text that read something like: "'STOP: c00000033 object name invalid ." "

    Essentially to: nothing works, and I not made any changes to the computer itself, between the time he was working, and now when it is not.  It loads just for as long as I leave the computer running.

    Help or light on this subject would be much appreciated, as the thought of losing everything on a computer, I've had for almost two years is quite upsetting.

    Hey Maverick 104,

    Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

    If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

    Step 2: Try (method 1) system restore and repair the startup (method 2) as indicated in the link below:

    Your computer may freeze or it may restart to a black screen that has an 0xc0000034 error message after you install a service pack for Windows Vista

    http://support.Microsoft.com/kb/975484

    Step 3: Start the computer to system recovery options (follow the steps mentioned in the link below) > select command prompt tool and run Check disk to repair bad sectors on the hard disk.

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

     

    At the command prompt, type chkdsk /f and then press ENTER.

    Now, type chkdsk /r , and then press ENTER.

    Note: CHKDSK would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

    Let us know if it works

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Halo 2 for windows vista does not work on my windows 7. Saiys it cannot start the direct customer

    original title: Halo 2 for windows vista

    Halo 2 for windows vista does not work on my windows 7.  Saiys it cannot start the direct customer.  It will not work in single user either...

    Hello

    Plase make sure you have the latest version of the GFWL Client installed:

    http://www.Microsoft.com/games/en-us/live/pages/livemarketplace.aspx

  • Windows VISTA does not start - shows a green bar horizontal scrolling forever, safe mode stops at crcdisk.sys

    Windows Vista does not start.  It shows the horizontal scrolling green bar with microsoft (c) and then goes to a black screen with the mouse arrow that moves. Start in safe mode loads the drivers to the extent of the crcdisk.sys but meet once again at the black screen with the mouse arrow.   Have not the SATA drives connected.  Impossible to get to the command prompt to delete all files.  No work from safe mode.  Restore computer does not work.  I have looked at other posts regarding the renaming/deleting files, but cannot get to the command prompt to resolve this problem.  The computer is less than 2 years.

    Toshiba Satellite A205-S5831, dual processor running.  Running Windows Vista BASIC.  Hard drive seems to work, lighting, well working properly, no error at startup.  No perifpherals or a mouse, or a USB attached.  Disabling USB does not boot.

    Can someone give a help?

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use it.

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

    There is no Vista free download legal available.

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

    See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

    Normally, you have to press F10 or F11 at startup to start the recovery process...

    Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > find the latest Vista drivers for it > download/install the

    See you soon.

    Mick Murphy - Microsoft partner

  • Windows Vista does not start - only Safe Mode

    Hello

    Windows Vista does not start. Starts only in Mode safe. Same system of recovery is not backward by date

    Press F8 all turn the laptop.
    Choose the first option: by computer repair and try to repair the operating system automatically.

  • Satellite L30-105 (PSL33E) Windows Vista does not see the DVD - ram UJ-850 s

    Hello

    I have a Satellite L30-105 (PSL33E) with windows Vista. Windows Vista does not recognize the DVD - ram. BIOS recognize DVD-ram. I tried to download the drivers for the DVD-ram, but they are not on the side of Toshiba.

    Who can help me to get the right driver or learn more? Problems with the carpet * a DVD-ram uj-850 s ATA device and windows Vista.

    Hello

    The CD/DVD drive needs no special drivers!
    Vista includes a Microsoft driver that works with all CURIOUS s (CD/DVD drives)

    Simply said, the Vista should recognize the drive without any problems.

    A few questions; did you get any error messages? What is the status of Device Manager? Do you see yellow exclamation points?

    There is an old way to correct a similar drive problem. It worked on XP then try it on Vista OS.
    It of necessary to update the registry entry
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    1. click on the start menu.
    2. If it is a Vista machine in the search box type regedit without quotes.
    3. look for the registry key mentioned above.
    4. in the right panel you'll see something along the lines of UpperFilter and UpperFilter you want to click on each key filter and tap on delete. Click Yes when asked to confirm if you want to delete the key.
    5. restart Windows.
    6 let me know if it works.

  • My update of Windows media player in windows vista does not play a mkv file.

    * Original title: about file mkv

    My update of Windows media player in windows vista does not play a mkv file, what do I do

    There are solutions out there, depends on how much you trust the software that you download. Here is an example for Windows 8, could work for vista too - make sure you have a full backup and AV before you start :)

    http://www.AddictiveTips.com/Windows-Tips/how-to-play-MKV-files-in-Windows-Media-Player-in-Windows-8/

  • Windows Vista does not start upward, with success since the closure complete

    Hello world

    I actually had this problem for a long time, but I'm just now to a point where I'm ready to take a lead in fixing it.

    I can't identify when it started, but Windows Vista does not start upward, with success of a full stop. He gets to the screen where, in general, the green bars will travel across the screen, but the green bars will not come. The screen looks dim and sits there, with the text of the copyright of Microsoft Corporation. So, after not having on the mound, I have to manually shut down the computer by holding down the power button. When I try to start again, told me to go through the Startup Repair tool. If I jump the repair, I just have to meet the same problem - a computer that will not go beyond the screen "green bar".

    So, I do the Startup Repair, and told me what I do for the restoration of the system. Windows starts normally after the restoration.

    Don't forget, this happens from a full stop. To remedy this, I just never completely shut down my computer. I left running and back just at the beginning of the day. The computer may start restart, it just may not start with a full stop.

    Given the start of repair takes, literally, around 4 or 5 hours of full stops complete, accidental or power outages are a nightmare, I am obliged to wait 5 hours to get access to the computer. Fortunately, I have my laptop.

    If someone has encountered this? I saw people talking about the loop of startup repair, but that's not the point, I have. I have yet to see any discussion of my specific problem.

    Thanks in advance!

    Hello

    4-5 hours to do a startup repair is too long.

    Often you get better results if you a using a DVD of Microsoft Vista startup repair.

    Jose how to do a startup repair, etc. using a DVD of Vista from Microsoft

    Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

    Here is the guide to repair Options using a Vista DVD from Microsoft.

    If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

    http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

    Table of contents

    1. Overview of Windows Vista repair options
    2. How to perform an automatic repair of Windows Vista using Startup Repair
    3. Advanced Tools Overview
    4. Conclusion

    If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

    Unfortunately, you have to buy it.

    Here is a link to it:

    http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

    See you soon.

Maybe you are looking for

  • Photosmart 7520 installation fails

    I recently bought a Photosmart 7520.  Printer installs easily on Windows 7 Home machines, but fails to install on my Windows 7 Professional machine. After you run the Setup program on the disk filled OR run the installer from the HP Web site, I simpl

  • How can I restrict access to programs and use between different users?

    I have various users defined in the system. While I I want all users to be able to access and use Microsoft Word, there are some other proprietary programs that must be available for some users: me and my manager and staff. Of course, the administrat

  • Where can I find this disk management to rename my drive letters

    Somehow the drive letter for my drive external hard has changed and I need to restore it.  Where the hell is - this "disk management" that meets all these say to use to restore?  I don't know how to access disk management. I am running Windows XP Hom

  • Re install BIOS Pls Help

    Hello My computer is HP 430 Notebook PC. This is a brand new. but I did not get any CD driver with him. while I downloaded all the drivers for Windows 7 Ultimate 32 bit on HP official website. There is a driver called as below... So I press start to

  • Walkman application crashes

    After successfully using walkman days, today I woke up, turned on my compact z3 and suddenly got 3 errors "walkman stopped because of an error" and of course, it no longer works. I restarted the phone several times. Same question. My model is D5803 r