Profile of user - SFDC user ID

Similar Questions

• Profile of user failed to connect

  Profile of user failed to connect.  Paswor does not work.

  Hello

  These methods should help for Windows 7 or Vista.

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. THE ADMIN
  Safe Mode account has no default password (so unless someone changed
  the password should be available).

  Some programs such as the Google Updater (if you've added the Google toolbar,
  Chrome or Google Earth) has been known to cause this problem.

  Error message when you log on to a Windows Vista-based or Windows 7
  computer by using a temporary profile: "the user profile Service has no logon.

  Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "the user profile Service has no logon. Could not load user profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have visited
  logged on with a temporary profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  ----------------------------------------------------------------------------------------------------------

  For Windows 7:

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK then
  Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
  If necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
  your password even (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the command prompt
  from there if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ----------------------------------------------------------------------------------------------------------

  For Vista:
  
  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the hidden administrator account to lower your user account APPLY / OK then
  Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
  If necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
  your password even (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the command prompt
  from there if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  How to create a Vista - free methods recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ---------------------------------------------------------------------------------------------------------

  If you can't access your old account you can still use an Admin to migrate to one
  new (remember to always leave an account Admin who is not used except)
  to test and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Error message: the user profile service has no logon. Profile of user was not found.

  Just after that Microsoft updates yesterday we received the following message: the user profile service has no logon.  Profile of user was not found.

  The user is locked.  I tried the system restore, but the computer does not. I don't have a disk of Vista to re - install.  Peux-I re - install online?  I have the product key.

  Thank you

  Joe R.

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s since the Partition of recovery in case of hard drive failure or System Crash, when you are running correctly.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• Profile of user not loaded correctly, you have been connected with a temporary profile. How can I fix it?

  I use a Toshiba Satellite with windows vista. My father gave it to me, but instead of creating a new user account, I have renamed the original administrator account. two years later, I have 3 accounts on the laptop, which only the original is still the sole Director and has access to all partitions on the hard drive as well.

  A week ago, my computer laptop power had reported issues so I immediately sent for repair. I came home today and the Standard 2 user accounts work perfectly. However when I connect to my original administrator account I get this pop - up message:

  "The user profile was not loaded correctly. You have been logged on with a temporary profile. Changes to this profile will be lost when you log out. Check the log of the events for more information or contact your administrator "

  I lost all my profile settings, including internet bookmarks, music playlists, etc. The office looks like a brand new installation of Vista and all the customization disappeared. I can't afford to lose all data. It is seriously important and was on my desk and in my documents.

  How can I get my profile without losing any data?

  Hi Salman91,

  Thank you for visiting the Microsoft Windows Vista Community.   New profile created, try browsing to the old profile (C:\users\username).  You should see all the old user data.  If this does not work, try to copy the files in Safe Mode.

  Please let us know if that helps.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• type it the password of the account, it says the user profile service Service failed the profile logon.user cannot be loaded.on from the system restore, it said: System Restore could not start. What should I do? __

  type it the password of the account, it says the user profile service Service failed the profile logon.user cannot be loaded.on from the system restore, it said: System Restore could not start. What should I do?

  Have a look here:
  http://support.Microsoft.com/kb/947215
  or here:
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

• Profile of user not in dba_profiles. What happens to PWD security?

  Hello

  I don't know exactly how it happened, but I have users in dba_users with dba_users.profile values that do not exist in dba_profiles. For these users, what happens in a perspective of security password?

  Thank you

  ponderdj

  is ponderdj, what version of Oracle?  With the help of a 10.2.0.5 system for test, I determined that Oracle does not allow you to create a user that references a non-existent profile in create it or if it let you change a user in a non-existent profile.  So I create a new profile, new user referenced the profile, which then attempted to abandon the profile.  Oracle has refused to give up the profile since it was used unless I have clear WATERFALL.  I've made and then checking the DBA_USERS entry for my test user.  The information had been updated to display the DEFAULT profile has been used.

  - -

  If I get a chance I'll try this on one of my 11.2.0.3 systems, but I expect the same results.  I don't know if I have a reference anywhere, but Oracle used to have a dictionary check script that would search for and identify problems in the RDBMS database tables.  A research on support may be worth your time.

  - -

  HTH - Mark D Powell.

• Paper profile, no user library

  Hello

  I tried installing paper profiles but I get no further than the user > name I should be able to see Library at this stage, but it is not here and so I can't sync enhaucer > profile.

  Go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder.  Select the library.

• Unique firefox profile all users and profiles on networks

  I am trying to configure Firefox like standard browser for an entire building, and this framework is to ensure that all firefox profiles are registered readers personal network rather than local machines. I can use the Profile Manager to do this on a user base, but what happens if I want that all users of any machine, using the same firefox profile that points to a specific network drive? (This will ensure users always have their browser settings and no matter where they go, allow us to move outside machines without losing all the browser settings, etc..) The contents of this drive is specific to the user account, but still have the same way.)

  As far as I know, the profiles created in the Profile Manager are specific to each user (domain), which would mean a lot of creating manual profile. Is it possible to ensure that Firefox always uses a specific profile of Firefox or the path? Is it possible to have the control of firefox profiles exist (in a .bat file, for example), so I can create the appropriate injector if necessary? Can I use a command line to set the profile to be used by default, or that can be done from the GUI Profile Manager?

  Finally and this can justify a separate query, but I found that when you use profiles that link to a network drive, trying to open firefox on multiple computers will fail (another instance of firefox is open, close it or restart). I can tell Firefox to force the old instance closed, or I have to firefox.exe - no-remote 'differentProfile' Pei each time?

  We are on Windows 7, moreover, for the sake of references.

  Sort of. I don't always have a perfect method to check the presence of a profile, but as a solution, I'm looking in the drive location of my custom profile for prefs.js Server (IF EXISTS 'path\path\Firefox\prefs.js' (thing do)), and that will at least tell me if I have created something here or not.

• Profile of user failed

  my name i s down, I have an administrator account and the guest account, when I try to access this account, it shows "user profile failed" and goes back to the accounts screen please help me as soon as possible

  Hello

  You can try the following.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  Kind regards

  DP - K

• Help urgently needed! -User profile takes a long time to load and the rest of the screen with the message "Please wait loading profile service user.

  Hello

  Every time that connect us to servers of TS farm, the profile of the user load for a long time and she stays with a message "Please wait for the user profile service" for longer than 5-6 minutes. We work in two areas which is configured as "an endorsement of forest transitive way." The domain (domain A) with TS farms hence connect us a cross forest profile disabled so we cannot load the roaming profile in this area, whereas another domain (domain B) roaming profile user's roaming profile.

  Also in the directory the Active directory of the domain B, TS/RDS settings is enabled for the problematic profile.

  TS / RDS--> roaming profile path and TS home folder is configured. TS/RDS settings is configured because we use other farms of machines/TS citrix other than the one in which there is problem.

  When disable us TS/RDS of the directory settings active directory domain B, then it is extracted to improvement in time. But we're in a situation were we cannot disable TS/RDS settings as we use other Citrix machines also. So we tried configuration GPO in A TS domain as

  Which allows to "allow only the local user profile".

  Allowing 'profiles itinerant Prevent password propagation to the server.

  This allows to "Allow asynchronous user group policy processing when you connect via Terminal Server Services"

  But still, there is no improvement in the time taken by the server to connect. What is the adjustment to make in the field of A TS, such that he will not try to charge the roaming of the B domain user profile, even if TS/RDS settings for the user profile are configured?

  Forums of evil: you want to Technet forums.  It's more domestic consumption...

  https://social.technet.Microsoft.com/forums/

• A profile of user ASPNET hijacked MY user profile?

  Yesterday I connected and used my computer as usual without any problem.

  Today when I started Windows and entered my password, I kept getting the "the system could not log.  Make sure that the user name and domain are justifiable, and then type your password".  I was unable to do anything at this point until I ran a boot floppy that allowed me to edit/delete user passwords.

  Removing the password so I could get the computer to start, I noticed the user profile of the NETWORK, which I had never seen before, but MY original user profile was not the case to find.  Now, I am running Windows on the Administrator profile and I go to computer management, local users and groups, users... and I see administrator, ASPNET and cba_anonymous (which my understanding is an Intel LANDesk user account)... but my profile is still not.

  I don't really have a problem with the ASPNET user profile be there, but it's almost as if this profile has taken the place of my profile and I really want to go back to my profile so I can retrieve my Documents and get to my desktop without having to start from scratch.  I considered as creating a new profile using my previous user name in the hope that he would use the previous documents and settings, but did not know TI that would work.

  Any suggestions?

  Hello

  What is the ASP.NET Machine account?
  http://marksxp.MVPs.org/WindowsXP/aspdot.php

  Check Microsoft answers Keith - response technical support technician in this thread
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-security/how-to-disable-not-delete-the-ASPNET-user-account/ad9fd31f-08c1-41A1-A463-5fb17d04e3a2
  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="">

• Profile of user does not write in c:\windows\temp

  Due to an update of Firefox, I damaged my user files.  I installed a new profile, the limited access, to surf. Now when I try to download programs or to run JAVA applications, I get an error message... "cannot write to c:\windows\temp, access denied, file is read-only. Change the properties of files or contact Admin"in some way, I lost the ability to write to this folder. Changing the property of the 'read only' file does not work, it activates again when the file is closed. I have here a way to solve this problem while still limiting the administrator user profile. level?

  First of all, if you look at the 'Read only' attribute of a folder in the Properties window, you must know that this box has absolutely nothing to do with any read-only attribute.  It is actually used to customize the folder.  Microsoft's explanation of this is in the following article:

  "You can not view or change the read-only or the attributes of system files in Windows Server 2003, Windows XP, Windows Vista or Windows 7"
    <>http://support.Microsoft.com/kb/326549 >

  To change the access permissions to a specific folder, the easiest method is to log on as an administrator and change the permissions using the 'Security' tab, as seen when right click on a folder and select "Properties".  If you do not see a 'Security' tab, this means that you have XP Home or you have XP Pro with 'Simple file sharing' enabled.  Assuming you have XP Pro, you can change the access permissions to the terms of this article:

  "How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP"
    <>http://support.Microsoft.com/kb/307874 >

  If you have XP Home Edition, you can start mode safe (repeatedly tap the F8 key during startup key) and then log in as an administrator and follow the above article, or you can log in as an administrator in Normal mode and use the command "cacls" from a command prompt window.  To bring up a command prompt window,
  Start-> Run-> "cmd".
  Then, enter the command:
  cacls C:\Windows\Temp/e/g everyone: F
  What will give "everyone" access to the complete directory.

  HTH,
  JW

• profile settings user lost to one of the two profiles

  I have two user profiles, the two level admin on my computer (XP PRO SP3). the other day I walked into my profile and restored all my custom settings back to default IE. my wallpaper, bookmarks in firefox etc. even started with the tour of xp when I logged in. I check other profile and who has started up as usual with all custimzations. I tried the system restore, but none of the 4 previous points worked.

  Hello booyah99

  It seems that your profile has become corrupted and Windows created this new one for you.

  Take a look for your Documents

  C:\Documents and Settings\old user name\My Documents

  And your Favorites

  \Favoritesold usernameC:\Documents and Settings\

  .

• Profile of user lost after auto updates

  After updates have been loaded automatically, after the start, the Office now says the user profile has been lost.  It displays an icon containing our name below, but when I click on it, it is also with not found user profile.  What's past and how to fix it?   HELP and thanks!

  Hello

  1. are you referring to the Windows security update?
  2. What is the update number windows?
  3. are you able to boot to the desktop?
  4. what exactly happens when you restart the computer?
   
   
  I suggest you follow the links:
   
   
  How to use system restore to log on Windows 7 or Windows Vista when you lose access to an account:
  http://support.Microsoft.com/kb/940765
  If you are able to log on the computer then you can check what update has been installed.
   
   
  See the Windows updates are installed:
  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed
   
  
  It could be useful!

• I have 2 profiles of user configured on my pc and now we can't open

  When I click on the user icon I get a message that says:

  The user profile Service service has no logon.
  User profile cannot be loaded.

  Take a look at this tutorial to Microsoft support:

  The user profile Service has not logon. User profile cannot be loaded

  http://support.Microsoft.com/kb/947215