Program does not run in the emulator.

Similar Questions

• I installed Acrobat 8 Professional 32-bit version and my computer is 64-bit, the program does not run correctly and I want to uninstall the 32-bit version and re-install the 64-bit version, I can't find the download of US feed for Acrobat 8 Professional,

  I installed Acrobat 8 Professional 32-bit version and my computer is 64-bit, the program does not run correctly and I want to uninstall the 32-bit version and re-install the 64-bit version, I can't find US downloading feed for Acrobat Professional 8, any suggestions

  Hello

  Please see below the link to download: -.

  https://helpx.Adobe.com/Acrobat/KB/Acrobat-8-9-product-downloads.html

• I installed the download Assistant and she show Acrobat is downloaded, but the program does not run or listed as a program.  The only thing listed under programs is the wizard.  When I click on it, it gives me just the possibility to download Acrobat ag

  I installed the download Assistant and she show Acrobat is downloaded, but the program does not run or listed as a program.  The only thing listed under programs is the wizard.  When I click on it, it gives me just the possibility to download Acrobat again.

  Charlesgreen123 after the installation files are downloaded, you can run the Setup program to install Acrobat.  By default, the installation files are saved in your download folder.

• void VI does not run with the main VI.

  My main and sub VI is attatched.

  danil33 wrote:

  Re: void / VI does not run with the main VI.

  When you start your main program, the Subvi is called and the main VI must wait the Subvi before it can continue. However, the Subvi is not set to open the Panel before, so very probably that it runs in the background for 100 seconds (1000 iteration to 100ms), because no one can press the stop button at the beginning to put an end to the Subvi. Once the Subvi is completed, the last value is returned to the main VI via the output connector and the main VI can process and display this last value. At this point, the main VI stops, because it's done (hopefully you do not "continuous operation").

  Obviously you have some misconceptions of beginners on the stream. Please we tell exactly what you expect the program to do, and we might be able to point in the right direction.

• HP Color LaserJet CP2025n Prin: I need to download the older driver because a program does not work with the new driver

  Where can I find the olderdriver that I can use windows 64 bits 10,

  because a program does not with the new driver.

  The year may be 2014 or almost.

  Your Timo

  @tisalmet

  Thanks for the reply with the details,

  You can activate the Device Manager to view hidden devices by following the steps mentioned below:

  To work around this behavior and display devices when you click Show hidden devices:

  1. Click Start, point to programs, point to Accessories, and then click command prompt.
  2. At a command prompt, type the following command and press ENTER:

     Set devmgr_show_nonpresent_devices = 1

  3. Type the following command a command prompt and press ENTER:

     Start devmgmt.msc

  4. Troubleshoot the devices and drivers in Device Manager.

  For more details: click here

  Uninstall all software and drivers for printers:

  When you need to uninstall a driver completely, the best and safest method is to use the uninstaller of the device (if it has one). If you have added the device to your system with a Setup program (as is the case with most of the graphics card and sound card drivers, for example), you can uninstall it as you would any other program.

  1. Click Start, type uninstall program, and then press enter.
  2. In the uninstall window, which appears, scroll through the list and find your device or drivers. Double-click the entry to start the uninstall process.

  Sometimes devices will not have an uninstall program or the uninstall program will not appear in the list. In these cases, you can use Device Manager to remove the driver completely.

  1. Click Start, type Device Managerand press enter.
  2. Find and double click on the category of the device you want to uninstall (for example, the graphic card would be listed under display card) driver.
  3. Right click on the device, and then click Uninstall.
  4. Windows prompts you to confirm the removal of the device. Click OK to remove the driver.
  5. Once the uninstall is complete, restart your computer as soon as possible.

  Once the above steps are done, click here to download the full software features for your printer and follow the Setup process to start to use your printer again.

  I would like to know if these measures worked for you.  If they did, it's great!  Give us some reinforcements by clicking on the solution and laurels, buttons that help and others see that we have the answers!
  Good luck.

• Where can get newspaper of reason behind Manager jaxws soap does not run during the webservice call in weblogic 11 g

  Hi guys,.

  http://docs.Oracle.com/CD/E23943_01/Web.1111/e13734/handlers.htm#WSADV189

  I created SOAP manage by top surround URL and deployment artifacts are generated with build.xml.

  I don't know why managers do not run in the web service call in weblogic 11 g.

  Regarding

  Siddharth Singh

  Solution

  Ant was not generating little class and manager xml file

  I manually copy these files

  Maybe Ant was not generating these files because of this warning

  [jwsc] WARNING: types of annotations without Transformers: [javax.xml.bind.annotation.XmlRootElement, javax.xml.bind.annotation.XmlAccessorType, javax.xml.bind.annotation.XmlType, javax.xml.bind.annota

  n.XmlElement]

  [jwsc] 1 WARNING

  Full journal of ants

  D:\SOAP_JMS>Ant f ant - build - jhand.xml
  BuildFile: Ant - build - jhand.xml
  Trying to replace the old definition of the task clientgen

  Build-service4:
  [jwsc] TJ: processing module/om/sai/buddh/SaiWebService
  [jwsc] The analysis of source files
  [jwsc] The analysis of source files
  [jwsc] 1 TJS files processing for the module/om/sai/buddh/SaiWebService
  [jwsc] TJ: D:\Oracle-ESB-RND\EncrpytionDecriptionWS\src\om\sai\buddh\SaiWebService.java valid.
  [jwsc] Treatment of the web services JAX - WS 1...
  [jwsc] WARNING: types of annotations without Transformers: [javax.xml.bind.annotation.XmlRootElement, javax.xml.bind.annotat
  tion. XmlElement]
  [jwsc] 1 WARNING
  [jwsc] Compilation of 5 source files for C:\Users\si244339\AppData\Local\Temp\_y1j0ng
  [jwsc] Building jar: D:\SOAP_JMS\outputnew\AAJAXHandlerSai1EarResponseQ\om\sai\buddh\SaiWebService.war
  [jwsc] Created JWS deployment outputFile: D:\SOAP_JMS\outputnew\AAJAXHandlerSai1EarResponseQ\om\sai\buddh\SaiWebServic
  [jwsc] [EarFile] Application file: D:\SOAP_JMS\outputnew\AAJAXHandlerSai1EarResponseQ\META-INF\application.xml
  [AntUtil.deleteDir] remove directory C:\Users\si244339\AppData\Local\Temp\_y1j0ng

  BUILD SUCCESSFULLY

• Where in Windows 7 Pro to release the program does not run all computer starts?

  Where in Windows 7 Professional to release the program is not to turn on and start any computer starts?

  Hello

  Thank you for contacting Microsoft Community.
  You can go to start-> click on all programs-> select start. You can find all the programs that run at startup, here. Deleting will stop them from running at startup.
  You can also open the System Configuration to disable all programs running during startup. Go to start-> type msconfig.exe-> press ENTER. IF UAC prompts, click Yes. Opens the System Configuration window. Now go to the Startup tab and disable all applications (to remove the tick) you want to stop from running at startup. Click on apply and then OK. Restart the PC, once done.

• W7 Pro came with two installs. I want to install 64-bit, but this program does not run. I have processor EM64T and have installed the W7 32 bit, but want to install 64-bit

  I had XP and would like to take my EM64T processor and memory expansion capability. I bought W7 professional online and could not install the 64-bit version. I installed the 32-bit version, but want to install the 64-bit. I checked my ability of 64-bit. The error is that the installation is a 64-bit program. See below

  "The version of this file is not useful with the version of Windows that you are running. Check of your computer's system information to see whether you need a X 86 (32-bit) or x 64 (64-bit) version of the program and then contact the software publisher. »

  Hi Larry_437,

  Please take a look at the thread similar here with instructions on the upgrade of Windows 7 32 bit to 64 bit.

  You can also take a look at this article as well:

  http://Windows.Microsoft.com/en-us/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

  I hope this helps!

• program called by a program does not run it go to the taskbar.

  I have a program that calls a Visual basic program. In this example visual basic XP program would open and run. Windows 7 visual basic executes the program, but I have to the task bar and click on it.

  How can I get the Visual basic program is displayed without having to go to the task bar?

  Hello occprinterman,

  Have you tried to use the Task Scheduler?

  Find out information from the Microsoft Web site.
  http://Windows.Microsoft.com/en-us/Windows7/schedule-a-task

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Utility energy saver does not run on the new OS

  Hello

  I reinstalled win XP pro SP2 ED.4 Hun codename:Simplicity on my freshly purchased toshiba A110-253. My question is this:
  How can I install the Power Saver utility on it?
  I downloaded the utility of the European Union of Toshiba's official website: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  There are 2 subcategories in the Stellite A110 series: (PSAB0) and (PSAB6)
  It confused me a little, although I worry too much on this subject, I tried to install both, without success

  At the time where I'm aiming by running the installation file, the following error alert message appears:
  16-bit program cannot be run under Windows / must be something similar to that of the English version.

  Other utilities have been installed correctly, and they run correctly. I wouldn't ride the windows using the recovery CD, I prefer the one I use now.

  Having my laptop without the Power Saver utility rather annoying is that I am constantly on the go and don't have the possibility to recharge the batteries all the time.

  I hope someone can help me.
  Thank you in advance!

  Post edited by: beigli69

  Hello

  If you check laptop model label on the low side you will find a number of good model. I assume it must be satellite A110 - 253 (PSAB6E). Am I wrong?

  So now, choose the model of laptop just and download Power Saver Driver V2.42.0.4C and Power Saver Utility V7.03.07C. I guess you know that the order of the facilities is very important and if you check Installations instructions you will see Power saver pilot listed first and must also be preinstalled in a first time.

  By the way: it is always useful to create Tools & Utilities CD before you install own OS. Doing this, you should not upload anything just use this CD and install all necessary things in order.

  Good bye

• Zip7 program does not go beyond the installer

  I have ddownloded the Zip7 program for resizing photos files or folders. The down loaded 'install', ut every time that I try to "run" the program, the fact is reinstall the Setup program.  I don't know what to do.

  Maybe a corrupted download, download another copy and see if it works.

  Troubleshoot Windows install

  2438651 how to solve problems that may occur when you install, uninstall, or upgrade a program on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Substitute:

  Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:

  1. in the menu 'Start', click on ' execute:.»

  2. in the "Open" box, type "msiexec /unreg", and then press ENTER.

  3. in the menu 'Start', click 'run '.

  4. in the "Open" box, type "msiexec/regserver", and then press ENTER.

  If this is insufficient, the I would say to install the Windows Installer Cleanup utility and run that to remove the Java remains Setup files that can cause problems with your current installation.

  For more information, visit the below mentioned link:

  http://support.Microsoft.com/kb/290301

  ------------------------

  Click Start Orb, in the box, type search: Regedit.

  Highlight: HKEY_lOCAL_MACHINE/SYSTEM/CurrentControlSet/services/msiserver

  Verify that the SYSTEM account has full control. If it does not, add the SYSTEM account with full control.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

• Startup EXE does not run in the controller for cRIO-9002

  Hi all

  I have a compactRIO with controller NI 9002. The controller has the software suite.

  1 2011 Labview real-time

  2 NOR-RIO 4.0

  I made simple user LED flashing application target RT using Labview 2011 and build EXE. But EXE will not run after a successful deployment. I tried the cRIO controller using the rest of the basis of knowledge OR troubleshooting.

  http://digital.NI.com/public.nsf/allkb/52E943F7D6E7C0578625720A001DDF6E

  Kindly help me to solve this problem.

  You must disable the optimization to SSE2 option in your build properties that you run on a cRIO 9002, which is an older model that does not support this feature:

  http://zone.NI.com/reference/en-XX/help/371361H-01/lvconcepts/sse2_caution/

• Application created using the BB for Eclipse plugin does not run in the Simulator

  Hi all!

  I created an application using BB plugin for Eclipse.  I try to run in the Simulator, but it never gets displayed (the application icon is never shown).  However, I create a "Hello World" sample, which works perfectly in the Simulator.  My application in Eclipse has never shows all files .cod or .jad, there only have files .jdp and .rapc

  My doesn´t app have encoding problems or errors of any kind (at least not displayed in the view of error).

  TIP: I have copy - paste code in different applications, is that a problem?

  I tried:

  • Restart Eclipse,
  • Configuration of active building of blackberry,
  • Cleaning of the project,
  • Creation of the project,
  • Reinstall Eclipse,

  but none of this seems to work.

  Can someone help me please?

  Best regards

  Juan.

  Hi all!

  In the event that a person gets the same problem, I mentioned.  I found the solution: it turns out that I had a very high class with a lot of code on it and that s the reason why the application does not get launched into the Simulator.  What I did that I shared this class on the 4different classes each managing different parts of the code and now it works perfectly.

  Hope someone is enjoying this, cause I spent a lot of time trying to figure out what the problem was.

  Best regards

  Juan.

• App does not appear on the emulator

  Hello

  (I'm a noob to developing applications for the blackberry)

  I don't know why the HelloWorld application in the tutorial of does not appear in my Simulator. Boots Simulator, but there is nothing under the "Downloads" button in the menu, and the app does not appear under "Applications". I use the plugin Eclipse and the JDE component package version 4.7. I also went in the Blackberry project-> tab Application properties, and made sure "module system" is unchecked. I also tried to check "Auto-run at startup", but nothing happened when the Simulator began...

  Any ideas on what I am doing wrong?

  Thank you!

  Hello

  You don't need to check "auto-run at startup.

  Just make sure that your project is active.

  (a) project-> the value of active projects...-> check your project

  (b) or of the project properties-> general tab-> check "always do active project.

  Now, after the accounts, you should see your app in the download directory.

  Also check this tbilisoft helloworld example.

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&thread.ID=17514

  Concerning

  Bika

• By mistake, I downloaded a program called driver of dog. But now the program does not allow me the 'uninstall '. Help! Thank you

  Recently downloaded a program called 'dog driver.  It was a mistake.  But when I went into Control Panel to use the feature to "Uninstall" to remove the program... the program will not allow the uninstall feature to remove it.  Any suggestions?  Thank you

  If the Control Panel does not remove the software, you can use an uninstall program:

  Revo Uninstaller - if she is not fully removed - follow the link and download the free version:

  http://www.revouninstaller.com/revo_uninstaller_free_download.html