Program of Fuji will a camera since recent MS update download. Message "file not found".

Fuji told me that an update of MS Windows XP reduced to nothing the "autorun" feature and is the reason why I can't use my download of my digital camera.  It seems that the time is just the latest update for XP Pro.  How can I access the "job" they said later was made available?  The software is still there but I have to use another PC with the top software and then transfer it to a flash drive to get into my PC. This laptop was no these latest updates of its XP Home OS.

Crystal Ball® suggests that you are referring to the recent update ( security that has disabled the "AutoRun" feature for removable storage other than CDs and DVDs.

The reason for this change is to prevent malware to be run automatically when you insert a USB key or similar.

Even if the 'AutoPlay' box is not pop up asking you what you want to do when you connect your camera, you should always be able to a connect the camera, (b) and then launch any software application used to manage the images, then (c) on any menu in this application item should get the images (for example file > import) get Images, download, connect to the camera, or whatever it might be called).

If you want to ignore the potential risk that the addressed security update, running difficulty he 50475 will be re - enable AutoRun/AutoPlay on USB drives.  Difficulty he 50475 and 50471 are available on this page:

Tags: Windows

Similar Questions

  • When I try to remove the program from the toolbar of Verizon Broadband, he said "the toolbar DLL is not found."

    When I try to remove the program from the toolbar of Verizon Broadband it is said "the toolbar DLL not found, help

    We are not in a position to help unless you help by providing us with as much information as possible.

    Suggestions for asking for help on a site.

  • Recently, I got a message saying ' not enough system resources to open the application' for example to explore or outlook express.

    ?? Resources

    My computer has been works well, but twice recently, I got a message saying ' not enough system resources to open the application' for example to explore or outlook express. Restarting it works again, but why the message?

    Hi RaymondWilson,

    ·         Did you do changes on the computer before the show?

    Follow these methods.

    Method 1: Follow these steps:

    Step 1: Start the computer in safe mode and check if the problem persists.

    Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

    After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

    (a) click Start, run.

    (b) type msconfigand click OK.

    (c) the System Configuration utility dialog box appears.

    (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

    (e) when you are prompted, click restart to restart the computer.

    Method 2: Perform a System Restore and check the issue persists.

  • I installed Photoshop CC now when I download my older camera images in Adobe Bridge and try to open in Photoshop it says file not found

    I have two old cameras, a Canon Powershot SX40 and a Sony DSC - H2. Today, I downloaded Photoshop CC and when I try to open all the images that I downloaded on the bridge of one of these cameras, I get a message "Could not complete your request because the file cannot be found". I can see these image files in the Finder, Adobe Bridge, Illustrator and can open InDesign is. Help, what do I do to be able to open my photos in Photoshop?

    Hi rg,.

    If you have an older version of the Mac operating system, this error may result from last camera raw update.

    Refer to this link: error: 'File not found' when opening JPEG files

    Kind regards


  • I recently downloaded Adobe Reader dc... I am trying to open a document on my USB... However the file does not open. It says "file not found".

    I recently downloaded Adobe Reader dc... I am trying to open a document on my USB... However the file does not open. It says "file not found".

    Hey sam1502,

    Let me know what happens if you copy files from the USB on your desktop, then open it in Reader.

    If the error persists, then try to disable the Protected Mode under ' Edit > Preferences > (protection) "and see if that helps.

    Let me know.

    Kind regards

    Ana Maria

  • Since I use photoshop CC I've not found an easy way to scan by using the discreen function? help please

    Since I use photoshop CC I have not found a way to use the discreen function when you scan... help!

    discreen function?

  • Cannot transfer images from digital Canon to Windows Vista. received message "save file not found" "Cameras Windows DC. default download folder is "my images".

    I have been transferring pictures from my Canon Digital via the Canon software in a Windows "My pictures" file for about 2 years with great success.  Today, an attempt to transfer was interrupted with the message 'Save folder not found' "Cameras Windows DC.  I noticed that was missing the file "my images".  I added one, I reinstalled the Canon software, I tried to download the image using the "Windows Photo Gallery", but got the same message as above.  What can I do to be able to download the photos again?

    Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure:  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two (he may have started before that you have noticed).  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

    If this does not work, please transfer your question in images and video Forum at: where the people who specialize in issues related to the image will be more than happy to help you with your problem.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • I can't launch the programs installed on my pc! He goes to the downloads, but them not working please help

    I have flight games installed on my pc, I've played. Now when I try to open them, it goes to my downloads; and the download page does not open them. What happens with that. I am running windows 7 ultimate and programs still open to the top of my desk. now, he goes to the downloads and don't open them! I can't even use System Restore as the download page does not recognize the editor. It does not recognize any editor even microsoft.

    I have flight games installed on my pc, I've played. Now when I try to open them, it goes to my downloads; and the download page does not open them. What happens with that. I am running windows 7 ultimate and programs still open to the top of my desk. now, he goes to the downloads and don't open them! I can't even use System Restore as the download page does not recognize the editor. It does not recognize any editor even microsoft.

    using the analysis (recommended)

    If you have anti antivirus program update it and run full scan or if you do not get this one:
    AVG Free

    Do using the analysis: recommended

    You can run it from memory stick too.

    It is recommended to perform all analysis in safe mode.

    Make sure your system is clean first. use ccleaner to get rid of junkfiles

    Make sure your windows is uptodate and drivers work correctly and that they are as uptodate.

    Try to clean boot to see which program is causing the problem

    Statement from here

    Test your windows files

    Uninstall programs you don't use or you have installed recently and ut caused the problem

    Please visit my blog for more tips and tricks

  • Since the last update my iPad does not print to printer wifi

    My iPad recognizes my wireless printer, but since the last update for IOS 10 printer prints about him.  However he takes the paper but give just on plain paper.  Can someone please? Thank you very much.

    Actual start simple with a reset. Press and hold the home and power buttons until the Apple logo appears. Release the two buttons. Wait for your iPad to begin on its own.

    If the reset does not reset the wifi router by pulling the plug from the socket.

    Also do a print test by copying something to make sure that you have enough ink.

  • Since the last update installed, I can not open my older files.  I get the error message that the file is not found.  Installation remove my old files?

    Since the last update of Adobe Reader XI installed I can shoot to the top of the list of all my files on the SHOW ALL option, but when I try to open my old files, I get the error message that the file is not found.  The update to remove all my old files?  Is there anyway I can locate, then open them?

    You can use Windows or Macintosh to search all PDF files and start to bring together them.

  • Since recent iOS updated my 6s lights (lock screen) when moving or touching the screen

    Incredibly annoying and battery draining experience that only began just after I updated the iOS

    The lock screen lights up constantly, even when I'm not in contact with one of the buttons (I'm still not near the Home button).

    I have since disabled touch 3D , but it still happens.

    Try a forced reboot. No data is affected by this. To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

  • HP Envy m6-k010dx: update Windows 10, recently received message OS not found, stuck in auto repair

    Recently updated to Windows 10 8.1 and everything was fine, but then I started affected by Frost (windows stopped responding and the mouse and keyboard and I couldn't get to the Manager of the tasks accordingly) sometimes the gel would solve itself, but more often than not a closed hard must be carried out. Fast forward to today, and my computer froze 5 + at a time or two hours, then I close it and let it sit for a few hours, because I had to leave in any case. When I turned it on back but can't find OS message not shown on the screen and the computer turns off. I turned it on the message before auto repair, who showed up for a minute or two and then goes to a black screen and stays there, no options provided (I've ever seen the screen which offers the possibility to fix computer or solve the problems I found among other positions) and this has been the case all day no matter how I try to start it. A further experimentation I managed to get Hardware Diagnostics UEFI test using F2 (checking the battery, check processor, check for the wireless module, check the system board and the SMART hard disk check were in seconds, as soon as he started on short Hard Drive DST check that I received the result of the FAILURE and the test fails also) the results displayed as follows:

    ID 90F439-6MP7RE-XD7WXG-60QJ03 failure

    Product IF: E0L01UA #ABA

    Hard drive 1

    Do I have to replace the hard drive? Of course if this isn't the case any other ideas would be appreciated particularly with regard to the possible explanations about what could have caused this since I have not had any problems with the computer before the upgrade and no damage had never place and best way to proceed.

    Update: before posting this I turned on the computer and received the HP normal logo displayed during startup, after waiting a few minutes however the dreaded blue screen appears and displays the message saying:

    your PC must be rebooted, it will restart for you in a few moments...

    Then below this additional information concerns the following text is displayed:


    and then of course the computer shuts down. The computer was then turned and saw the preparation of auto repair as before (I had never received this precondition of message blue screen). So even once any idea would be appreciated, I think I've covered most of the details, but if anything else would be helpful let me know.

    @SabrinaRM: sorry to say this, but the drive test result means that your drive is defective or has already failed - and needs to be replaced. This means that no recovery, automatic or not, will work as the recovery information are damaged on the drive.

    Once you have a new drive, you must restore your PC - but that is a problem.

    Normally, I advise to use HP recovery media to restore your PC to its original state, but, unfortunately, there is only no recovery media HP not related to HP for your PC Product Page.  You can try to contact the HP customer directly, using the links below, to see if you can order them if:

    If you live in the United States or the Canada, details are on this page:

    If you live elsewhere, contact details are on this page:

    If HP no longer provides a recovery media for your model, a few other sites, you can check are: and

    Good luck

  • Vista - Error Code: 1706 (cannot install updates) valid any source not found for product Microsoft works9, which came with my vista

    Microsoft Works 9 came with my Windows vista Home Premium April 14,2009, I leave automatic updates do their thing, such as recommended and I was prompted to restart. So I did.    Now it always tells me I have the same important updates 3.

    (A security update for Microsoft Works 9 (KB2092914) and office 2007 (KB2251419) word and office system (KB2277947).

    So now, he tells me when I click on ms works, that the error 1706 no valid source could not trading for the microsoft works product. Windows install cannot continue.

    That's the only change I made to my computer, so I did what I could do,

    I contacted HP for help and we have tried everything and to

    Discover that now my "D" drive is corrupt also.

    I would like to know how I can get back my program without making a recovery or even buy it?

    I really hope someone out there can help me.

    You know I bought an XP in 2003 and it is still a good kicking.

    Thank you


    You can check if the error message you get when you try to use the application is due to the failure of the installation of the update of Windows related to Microsoft Works.

    Step 1:

    Check in Windows Update history if the installation failed or not for the 3 articles mentioned.

    To open Windows Update history

    (a) click theStart button,.

    (b) go toControl Panel,.

    (c) selectprograms, and then, under programs and features.

    (d) clickview installed updates.

    (e) search for update driver for the printer, get the KB article number.

    Step 2:

    You can perform a restore of the system on the computer to restore back the previous settings control also if Microsoft Works works.

    Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

    For more information follow the link below.

    System Restore: frequently asked questions

    Step 3:

    If the installation fails, try to install the updates manually and check what is happening. Click the links to download the three updates mentioned.

    Update of security for Microsoft Works 9 (KB2092914)

    Update of security for Microsoft Office Word 2007 (KB2251419)

    Update of security for Microsoft Office Word 2007 (KB2251419)

    Note: Before to install updates manually set the computer to clean up state of startup and then continue with the installation. To configure your computer to clean boot follow the link below.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    Note: Once you have finished installing the updates, follow step 7 article to start on normal startup.

    Hope this information is useful.

    Amrita M

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I had A RUNDLL error in the middle of working on my moms computer the other day, this is: C:\Program files\common files\paretolic|uus2\uus.dll specified file not found someone can help? She has a dell computer that runs on XP

    I'm willing to try to fix it with help.

    The file belongs to the ParetoLogic data recovery software. If you have uninstalled this program, a reference has been left in the start. You can remove it as follows:

    Start > run > msconfig [Enter]

    This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

    If your mother uses this software, uninstall/reinstall. MS - MVP - Elephant Boy computers - don't panic!

  • I can't transfer my photos or videos from my camera more after that I downloaded a file cleaning AVG

    I downloaded an AVG clean file cause it was free and said that he could run my fastest computer and had a lot of good reviews. I have had no problem transfer of photos. my camera to my folder of photos before and now no window opens when I plug it into the USB connection. I have one installed the AVG from my computer, I downloaded a utility Drivers of Sony, my camera is a Sony and still nothing. Do not know what is happening... Help!

    The following links may be worth a visit:

    (927836) a still digital camera is not recognized
    in Windows Vista or in Windows XP

    (330135) the AutoRun or AutoPlay feature
    Does not work

    If you are running Windows XP, the Microsoft AutoPlay Repair Wizard can be worth a try.

    Connect the camera via a USB cable and turn it on before running the wizard.

    Microsoft AutoPlay Repair Wizard

    Also, the following information may be useful:

    Connect the device to your PC via a USB cable and turn
    on the camera... If open windows... Close them.

    According to... to... Start / my computer... the camera can be
    listed as a drive letter...

    If_yes_right click on the drive letter and select... Explorer or
    Open... This should display the directory of the memory card.
    You can copy and paste or drag and drop the files from there to a
    folder on your hard drive.

Maybe you are looking for

  • How can I find my bookmark for a sentence labels, to find all tags that contain this phrase?

    I have a lot of tags on bookmarks. If I can't remember the name of the tag, but remember that this is 'cooking' how I am looking for the names of tags with this word? The search in the top right bookmarks bar gives all URLS with the word. I want to m

  • How can I remove the search engines grouped?

    I can't delete or disable the search engines related to companies who commit serious violations of human rights through the menu settings of Firefox for Android. What are my other options? Firefox has become literally offensive. Alternatively, what a

  • Vista PC and a cable network.

    Hi, I had a wired network with 3 pc is running XP, no problem, but the main computer, mine, gave the soul so I bought a new Vista PC. I plugged it all this, but now 2 other PCs do not have access to the media and files etc on my Vista pc, even if the

  • Fact my tablet / computer laptop support WiDi?

    Hello I just bought a new laptop / Tablet: PC HP Split 13-m100la x 2 (E7H88LA). * I bought the tablet in South America (particularly here in Chile) However, I'm confused.  I am not sure whether or not it supports WiDi. I read similar tech specs on si

  • Keep the data I enter my VI after I closed the V, without him the default reset?

    My VI allows the user to enter a song using the amplitude, duration and frequency of each note that is stored in a table.  When executing the VI, registration notes are played to allow the user to hear the song. I would like to that entry to stay in