Program of self-monitoring for this device
The computer that I use with a NI PCI card installed is shared by several employees and is frequently disasembled and reasembled. Sometimes, the card OR is in a different PCI on reasembly slot.
Someone at - it recommendations for how to test the locations of device to the card with C / C++ code without interupting the user with error messages?
If you are looking for in the file these sets, you will find "buyers" for all of these properties... For example if you are looking for DAQmx_Sys_DevNames, you will find the DAQmxGetSysDevNames, which is the function you call to get a list of all the DAQmx devices in your system. Similar "buyers" are available for other devices and system attributes as well.
Basically, you need to understand how you want to identify a device. You can use the Type of product (DAQmxGetDevProductType - which gives you the name of the product is to say...) "(PCI-6259')." If you have multiple devices of a particular type, you can use the serial number (DAQmxGetDevSerialNum). Your logic is as follows:
DAQmxGetSysDevNames()
for (each devNme)
{
DAQmxGetDevProductType()
if(devName == desiredDevName) break;
}
Now that you have identified which device you want to use, you had pre - hangs to the string that you want to use, and your application should work regardless of what device name it receives.
Dan
Tags: NI Hardware
Similar Questions
-
I hope someone can help with this! I am tring to use my scanner without success with the ' software for this device is not installed.
Measures taken so far
On a new copy of the Mavericks with installed updates (10.9.2) I added my wireless printer successfully and I can print my documents successfully. My Mac has recognized that this printer includes a scanner and the scanner appears in the preview, capture of the Image etc.
Problem
During an attempt of a scan in any of Mac programs a message that says "the software for this printer is currently unavailable. Contact the manufacturer of the printer to the latest software. "is displayed. There seems to be no software or drivers on the HP site for my scanning equipment. I simply said that it is all built into OSX. I checked the printer on Apple's site and it is listed as supported for printing and scanning. I hope someone can help!Finally, I snapped this.
When you add the printer it seems that OSX AirPrint as the default printer driver.
To solve this problem, I completely deleted the printer, the printer readded but changed AirPrint for my specific printer driver and all my scanning functions are now available.
Thanks for all your support!
-
I connect and transfer content from my computer to my Kindle all the time, but today when I plugged the Kindle my pc tells me that the device needed troubleshooting. After you run the troubleshooter, I gives me this message:
"The drivers for this device are not installed. (Code 28)
There is no driver selected for the item or a set of device information.
To find a driver for this device, click Update driver. »
This has never happened before, and, no, I have not recently downloaded new applications, programs, updates or had a system crash. It was, as usual, a few things. Where it says "to find a driver for this device, click Update driver" which is non-interactive. I can see it, but you can't click on it. That's happened? What should I do?
Scott.
Hello Scott,
Thanks for posting your question on the Microsoft community.
We need more information about the issue so that we can help you better.
What is the brand and model of your computer?
Thank you for details on the question and your efforts to resolve.
This problem can occur because the parameters or corrupt device drivers.
I suggest you run this Microsoft fixit and check if it helps.
Reference:
Hardware devices do not work or are not detected in Windows
https://support.Microsoft.com/en-us/mats/hardware_device_problemsAutomatically, he diagnoses and fixes problems with the hardware. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.
Please also try to update the device drivers by using the steps described in this article and check.
Reference:
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISNI hope this information helps.
Please let us know if you need more help.
Thank you
-
Original title: WAN miniport driver
A yellow sign appears on MINIPORT Wan (IP), MINIPORT (IPV6) AND WAN WAN MINIPORT (NETWORK MONITOR) for this reason I have not access to internet to throw bluetooth tethering that even he does not connect. In the properties of the driver, it indicates:-this device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
I use windows 8 in my sony vaioMODEL - SVE15123CNWHi Praveen,
Perform the steps suggested by Nirmal S from the link below and see if it helps.
Answer please if you have any questions.
-
I pressed "do not open pictures for this device" for when my iPhone connected. Now, I can't seem to find a way to import photos from that device because my phone is not displayed. I now want to import photos from my iPhone, but nothing works. Can someone, please?
MacBook Air, OS X El Capitan (10.11.1)
Honestly, this entire thread is a repost of this , I pressed "do not open pictures for this device" for when my iPhone connected. Now, I can't seem to find a way to import photos from that device because my phone is not displayed. Can anyone help?
Still no answer...
Have you tried the following:
- Launch Photos manually once you connect your iPhone to the Mac.
- Enter the ⌥⌘S tomato (command-option-S) key combination the sidebar visible.
- Click on the camera in the sidebar when it appears.
Your iPhone shows in iTunes or in the Image Capture?
If iPhone doesn't appear at all, make sure it is properly loaded and unlocked, disconnecting, take a new photo, then reconnect it.
- Start iTunes and confirm that you agree with the mac, the prompt on the iPhone.
- Try a different USB port.
- Try to force reboot the iPhone.
-
Hello
I get this error:
The drivers for this device are not installed. (Code 28)
model: HP 250 G2 Notebook PC
Model number: F0Z43EA #ABT
PCI\VEN_10EC & DEV_5229 & SUBSYS_218F103C & REV_01
PCI\VEN_10EC & DEV_5229 & SUBSYS_218F103C
PCI\VEN_10EC & DEV_5229 & CC_FF0000
PCI\VEN_10EC & DEV_5229 & CC_FF00How I solve the problem?
thnx
Hello:
You need this driver for the card reader:
Download and install the driver first on the list from the link below.
-
USB-TC01 gives error-201165 "firmware for this device is too recent.
Not sure where else to this post, but the USB-TC01 DAQmx uses, so maybe someone recognizes this.
I plug it to the USB port and it lists very well. It runs the application very well canned.
But when I try to take data under DAQmx 9.1.5 I get this curious message, as well as boards "Downgrade of firmware for this device" I don't want to do that.
EDIT: I see that the firmware of the device is 1.1.0f 1
The specifications of the USB-TC01 don't say what version of DAQmx is necessary, although 9.1.1 supports the device.
I tried on XP and Win7 with the same result.
TIA
Ed K
I guess that "ancient" is relative. Budget and LV9 story of me and I have to stay on the DAQmx version. But NEITHER finally took me in his Web and it's time for an upgrade. A trial version of new LV and 9.9 DAQmx solved, of course. I just wish that error message had been less weird. At least, it is here for someone else could find an answer, no matter how obvious.
-
My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »
Is anyone know how can I access my hard drive again?
Thank you
Hello
You has made changes to the system before the error appearing? Cancel the changes.
(1) in Device Manager > right click on the driver, and then select uninstall
Reboot and Windows will reload the driver
(2) remove the upper & lower filters that cause errors in Code 31
http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm
Access the manufacturer's Web site and search for updated driver
-
Original title - USB - IF xHCI USB Host Controller
This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
I have a permanent error on my computer and when I run the troubleshooter I get the above message. It says Windows cannot load the driver.
Hello
USB devices remove all you can - restart the computer - is still there, the error? If it isn't
It is related to one of the add-in devices that you removed. If she is still there, then, the question is
either a device internal who can not remove or physically with the USB bus itself.
If it was not there, add devices at a time until it is displayed - keep in mind that it is
possible that there are two (or more) devices in conflict over the issue. Once you
identified the check of the aircraft with the help of the manufacturer.1. to find the control panel - device - device - right-click on it - uninstall - Manager then
Restart the computer to see if it clears.2. same place - double click on the device - driver tab - driver update - to see if that helps.
3. check with the support of system manufacturer (manufacturer of motherboard for customized systems), their
online documentation and drivers, diagnostics and ask questions in their forums on all known
questions. Update the Bios and chipset or other USB drivers.=====================================
If necessary, we will use these additional troubleshooting methods:
How to fix Code 31 errors
http://pcsupport.about.com/od/findbyerrormessage/a/code-31-error.htmI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
I HAV these two errors in my drivers and windows cannot update, can any body healp me?
Hello
What devices are - if you can not tell what is the name, then you can specify the category of
Device Manager - or both?--------------------------------------------------------------------------------------------------------------------
This device is not present, is not working properly or is not all its drivers installed. (Code 24)
The device doesn't seem to be present. The problem may be a faulty hardware or a new driver might be needed.
Devices to stay in this State if they have been prepared for removal. After you remove the device, this error disappears.
On theGeneral properties of the device tab, clicktroubleshoot to start the Troubleshooting Wizard.
---------------------------------------------------------------------------------------------------------------------
The drivers for this device are not installed. (Code 28)To install the drivers for this device, clickset to update driver, which starts the Hardware Update Wizard.
==================================================================
Those who might be ghosts then right click on them and UNINSTALL - devices and then RESTART.
References to Vista also apply to Windows 7.
If they show upward then try to manually install the drivers.This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers to 7 (update drivers manually using the methods above is preferred
to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Under Xp (sp3), Device Manager gives me an error for a Walkman NWZ-S545. XP sees it as a MTP device, but it does not start. The Device Manager will give me 2 error messages: device will not start (code 10) not and no driver not found for this device. The walkman works very well with my other machines on the LAN XP but naturally one that I run my media (a all my MP3 etc.) is the one that has the error. All of my PC are almost identical (with the exception of the server, duh). I changed USB ports, uninstalled/reinstalled drivers, called SONY to dozens of times, nothing works. Is a service not started that must be, a driver damaged, what? Thanks for your help in advance.
Hello
I suggest you run the fix that is present in the link below then connect the Walkman on the system and see if the problem is resolved.
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104
I suggest to uninstall the drivers and firmware for the walkman of the system then download it from the Sony site and install it on the system and check if the problem is resolved.
http://eSupport.Sony.com/us/Perl/SWU-list.pl?MDL=NWZS545&SelectOS=7#div_pos_94
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Windows XP SP III, device status: _ a driver (service) for this device has been disabled. Another driver can provide this functionality. _ (Code 32)
Hello; I use a Windows XP SP III; After I entered a CD in my disc drive, I noticed that nothing was happening. So I try to manually click on the disk drive, noting that he had completely disappeared. After checking the status of the device in Device Manager, I found that this note has come:
A driver (service) for this device has been disabled. Another driver can provide this functionality. (Code 32). I had removed the device and reinstal it again but still the same.
Information how to fix this problem would be apreciatedTry following the steps for Windows XP in the following MS KB article:
http://support.Microsoft.com/kb/982116
These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.
Create a System Restore Point beforehand and restart the computer later.
-
Found no media for this device
My Toshiba satellite C655 model laptop couldnot find peripheral Audio High definition audio bus for the Windows Xp operating system. When tried to install the audio driver for Conexant high defintion an error pop up to install microsoft Universal Audio Architecture and couldnot find media for this device. I tried all ways but couldnot find any solution. Please help me...
Hello
This seems to be a known problem with this particular model and driver:
See the link provided below, the Toshiba Forums to resolve the problem:
http://forums.Toshiba.com/T5/sound-audio/Toshiba-C655-SP6001L-audio-driver-XP-7-32-bits/TD-p/131716
For more support board you can also contact Toshiba Support
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp
-
I can't put it to the top of my ipod shuffle... it says that the USB device is not recognized... It also says that no drivers are installed for this device. My son has an ipod touch and I have another MP3 player and both work very well. Is there something special to set up an ipod shuffle?
Google for forums of Apple and choose the right pair for your question.
-
Error code 28: the drivers for this device are not installed for Ethernet controller
Original title: I received an error message for, controller ethernet, the drivers for this device are not installed. (Code 28)
I don't know how to install the drivers for ethernet controller, and I don't think that I have a CD for it. And I don't know where to go.
Hi jhawkerchic,
1. What is the number of brand and model of your computer?
To resolve this problem, you must install the latest version of the drivers for the device.
You can check the manufacturer's website and download and install the latest version of the drivers available for the device.
You can see the following article for more information about the error Code 28:
Explanation of error codes generated by Device Manager in Windows XP Professional
http://support.Microsoft.com/kb/310123
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Maybe you are looking for
-
8gig of ram will be enough to use windows?
I'm about to buy a macbook pro. This is the model of 512 gigabytes, 3.1 GHz, 8 GB ram. I want to only install windows to play spintires and that would be it. If I install windows and steam then spin tires it will the macbook running slower? rotating
-
How to configure a router modem
Comment know ke my modem is set up in router mode knowing c UN modem cable pay to be able to watch TV.
-
M477fdw: Updated Firmware for M477fdw and now it does not print correctly
I noticed that I had an update on the printer, then I hit install update. After the updated whenver I print print hollow letters. I wouldn't change a thing on my Mac, I even tested it from a Windows machine I have. The first page prints always hollow
-
Just Sony Vegas Movie Studio 9.0. "I could download and register successfully, but whenever I try to open it, the yellow triangle with an exclamation point appears saying:" an error occurred from Vegas Movie Studio. An internal error happened in the
-
How can I change my windows hotmail password?
recently, I realize that my windows live account change desktop icon on a globe, I know it's not normal, so I would like to change my password, then sign, how do I change my password?