Program runs in the hidden administrator account, but not the administrator account

Similar Questions

• Why my program runs fine in execution of climax, but not normally?

  Hey everybody,

  So I created a program that works very well (to produce a graph of intensity) when I select run, but then when I run the program without execution of climax, the output intensity graph does not appear. I enclose a copy of my program for reference. Thanks in advance for the help!

  What kind of error do you see? What does not work?

  I have all the subVIs that make up your VI you have posted and it would be difficult to say what is happening, but I suspect that you run in some sort of timing issue. When you run with execution highlighting turned on you slowly run downhill. During normal execution things can run before the system is ready. Maybe your initialization of the camera takes time to complete (on the hardware itself) and when you run in normal mode you are trying to access it until it's ready.

• There is a program running in the background on my computer. It blocks my mouse and I can even hear a clatter, as when you connect a camera to your computer, or disconnect.

  I tried several times to get a solution to this problem.  There is a program running in the background on my computer.  It blocks my mouse and I can even hear a clatter, as when you connect a camera to your computer, or disconnect.  My computer has been analyzed by microsoft help and support was in my computer several times, and accomplished yet nothing worked.  Sometimes my mouse freezes every few seconds until it is maddening.

  original title: hopeless

  It seems that you have tried a number of bugs so far without success. Here are some suggestions of what I'm going to try:

  You mentioned a background current program, if it helps:

  Perform a clean boot to determine if background programs interfere with your game or program
   http://support.Microsoft.com/kb/331796

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
   http://support.Microsoft.com/kb/929135

  Don't forget to follow step 7: reset the computer to start as usual in the link above to return the computer to normal startup.

  I would also check the updates for your video card driver. Find the latest Windows Vista drivers for your specific computer model with the support site for your computer manufacturer. Be sure to get the right drivers for your specific version of Windows Vista, for example, 32-bit or 64-bit.

  If your mouse is a USB model, it can be useful to check the latest drivers for your motherboard (chipset) Vista to the support site for the manufacturer of the computer. Also, since you're here you can check for the other updated drivers for your system, i.e., audio, LAN (network), etc.

  Computer manufacturers
   http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have the graphics card Intel integrated, you can check on the website below:

  Update utility graphics card Driver Intel
   http://www.Intel.com/p/en_US/support/detect/graphics

  If you have a dedicated graphics card, you will need to check with the card manufacturer, the two most often used are linked below:

  NVIDIA driver downloads
   http://www.nvidia.com/download/index.aspx?lang=en-us

  AMD (ATI) drivers & Software graphics card
   http://support.AMD.com/us/GPUDOWNLOAD/pages/index.aspx

  If you have not done so, see the support site of the manufacturer of the mouse for the Vista updated drivers, known issues with your specific models or known solutions.

  An element that may cause unpredictable problems that are extremely difficult to identify are (live RAM) memory errors, Windows Vista has a built-in for system RAM check utility:

  How will I know if my computer has a memory problem?
   http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem

  How to use the Windows Vista memory diagnostic tool
   http://www.bleepingcomputer.com/tutorials/using-Vista-Windows-Memory-Diagnostics-tool/

  To perform a more complete test is the use of Memtest86 but is more complex, includes the creation of a CD bootable for the test, it is not really something for difficult burn an .iso file downloaded to a blank disc (available in the free download link) and then boot from the CD.

  Memtest86
   http://www.Memtest86.com/

  I hope that something of the above can help lead you to a solution.

  Kind regards

• AcrobatX worked well both printing and scanning when harwired to my computer. I went wireless and Windows programs work well both printing and scanning, but not Acrobat.

  Using Windows7 - I tried Windows10 but restored to 7.

  AcrobatX worked well both printing and scanning when connected to my computer. I went wireless and Windows programs work well both printing and scanning, but not Acrobat. In Acrobat, we don't get the scanner and printer prints in a .prn e-file, not to the printer.

  Help please...

  OK - I'VE CORRECTED THE PRINTER WHICH HAS BEEN INEXPLICBLY THE 'PRINT TO FILE' VALUE, BUT THE SCANNER IS STILL MISSING.

• Error message: to restore enough memory for programs running, save the file and then close or restart all programs

  It said "restore enough memory for programs to operate correctly, save the file and then close or restart all open programs".

  I changed the size of paging and says always the same, I have 1.5 GB free RAM, but don't know how to find or what to do 'virtual memory '.  Have windows 7.

  I started the safemode and run also memory dignostics and nothing found, please help, cannot afford to take a shop or get a new computer, I'm using another pc.

  I was recommended to download and. Run 'hitmanpro3'... but if anyone has had this problem and solved it or know how, please help!

  Thank you

  Hello

  Please contact Microsoft Community.

  I understand that you receive an error related to the lack of virtual memory. This error message appears when running any program that requires more memory your computer has, or running in the background, Windows manages the system memory by saving the data between physical memory and virtual memory. In order to help you better, please provide us with the following information:

  What is the brand and model of your computer?

  I suggest you follow the methods and check them off below if this solves the problem.

  Method 1: Clean boot

  A clean boot is a troubleshooting technique that allows you to get the computer facing up and running so that you can determine what elements of the normal starting procedure problems.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: Once you are done with the clean boot, follow the section How do I reset the computer to start as usual after a clean boot troubleshooting under more information in the article to put your computer to normal startup.

  Method 2: Prevention of insufficient memory problems

  Follow the steps mentioned in the link and the check, it solves the problem. Follow the evolution of the size of the virtual memory section

  http://Windows.Microsoft.com/en-us/Windows/preventing-low-memory-problems#1TC=Windows-7

  Method 3: Virus Scan

  Microsoft Safety Scanner is a free burner that can be used to analyze a system for computer viruses and other forms of malware.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Warning: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Additional information: Windows optimize for better performance

  Hope this information helps. Response with status so that we can help you.

• Slow sign on and close to vista, how to I stop unused programs running in the background that I no longer use?

  PC takes up to 10 minutes to sign in and even close. Programs that run in the backround slow down COMP...

  rojo2USA,

  Please take a look at the following:

  http://social.technet.Microsoft.com/forums/en-CA/itprovistahardware/thread/5f46dd87-2d47-448f-B202-3162004d8204

• The scaner of safety program run for almost two hours and did not have detected what regardless of whether what is this microsoft scan?

  Operating system: Microsofti¿½ Windows Vista? Home (it shows that I have this Setup on my computer)

  My computer is corrupt the scaner microsoft run for almost two hours and did not find anyting.

  I have siscis Trojan, Skype worm PEKSE aver 1300 errors discovered by the other's signed starup program...

  Port 80 and 123 corrupt... I'm on hollow connection DSL my modem wireless (and connected to some infrastructure 5 GHz) and 2.4 Ghz wireless where I search I'm somehow hacked via the wireless I guess...

  Any program which tells you that you have 1300 errors is almost certainly a scam.

  Try to scan with Malwarebytes free

  http://www.Malwarebytes.org/products/malwarebytes_free

• How do I know what programs running in the background?

  Original title:

  programs

  How can I find out if there are programs that run in the background on my windows 7, and how can I get rid of them?

  Go to: http://cmdrkeene.com/fix-sluggish-slow-pc to see how to find the programs that run in the background and how to disable them.

• Programs running within the VM player

  Hello

  I installed VM Player on my computer with Windows 7 so that I can run software that is compatible with Windows XP.  I have successfully gone through the installation process and my virtual machine seems to work as expected.  Now, I need to get the software running in the VM player.  How can I do this?  I save the exe on the virtual machine, and then install it there?  Let me know if you have any ideas.

  Thank you

  Eric

  Installing the software on a Virtual Machine is no different then install on a Virtual Machine if just do.

• TableView context Menu appears when running Java 8 until Update 5 but not later

  The code below works as its name suggests the update of Java 8 5 but not later:

  SerializableAttribute public class TableViewShowingOnlyAnAppendContextMenuItemIfRowIsEmptyElseDeleteIsIncluded extends Application {}

  final table private TableView < name > = new TableView <>();

  private data of ObservableList < name > finals = FXCollections.observableArrayList (new Name("Jacob"),

  New Name("Isabella"), New Name ("Ethan"), Name ("Emma") New Name ("Michael")) new;

  Public Shared Sub main (String [] args) {}

  Launch (args);

  }

  @Override

  {} public void start (steps)

  TableColumn < String > name, column = new TableColumn <>("name");

  column.setCellValueFactory (new PropertyValueFactory <>("name"));

  table.getColumns () .add (column);

  table.setItems (data);

  ContextMenu contextMenu = new ContextMenu();

  contextMenu.getItems () .add (MenuItem ("append")) new;

  table.setContextMenu (contextMenu);

  table.setRowFactory (tableView-> {}

  TableRow < name > line = new <>(TableRow);

  row.contextMenuProperty () .bind ((in English only)

  Bindings.When (Bindings.isNotNull (Row.itemProperty ()))

  . Then (showOnlyAppendContextMenuItemIfRowIsEmptyElseIncludeDelete ())

  .otherwise ((ContextMenu) null));

  next row;

  });

  Scene = new Scene (table);

  stage.setScene (scene);

  internship. Show();

  }

  private ContextMenu showOnlyAppendContextMenuItemIfRowIsEmptyElseIncludeDelete() {}

  RowMenu ContextMenu = new ContextMenu();

  ContextMenu tableMenu = table.getContextMenu ();

  If (tableMenu! = null)

  rowMenu.getItems () .addAll (tableMenu.getItems ());

  rowMenu.getItems () .add (MenuItem ("delete")) new;

  Return rowMenu;

  }

  Public NotInheritable class {name}

  private final SimpleStringProperty name

  private (String name) {}

  myIdName = new SimpleStringProperty (name);

  }

  public String getName() {}

  Return name.get ();

  }

  public void setName (String name) {}

  This.Name.Set (Name);

  }

  }

  }

  Can help me find the error in the code? Or if there is anything, it's a regression which must be submitted? From now on, all computers used have 8u5.

  Thanks in advance.

  Answered correctly by James_D:

  http://StackOverflow.com/questions/28195552/JavaFX-TableView-context-menu-item-shows-up-when-run-on-Java-8-until-Update-5-Bu

  pasted below:

  The solution is to create new menu items which are copies of those in the context menu of the table:

  private ContextMenu showOnlyAppendContextMenuItemIfRowIsEmptyElseIncludeDelete() {}

  	RowMenu ContextMenu = new ContextMenu();
  	ContextMenu tableMenu = table.getContextMenu ();

  	If (tableMenu! = null) {}
  	{for (MenuItem item: {tableMenu.getItems ())}
  	RowItem MenuItem = new MenuItem (item.getText ());
  	rowItem.setGraphic (item.getGraphic ());
  	rowItem.setOnAction (item.getOnAction ());
  	rowMenu.getItems () .add (rowItem);
  	}
  	}

  	rowMenu.getItems () .add (MenuItem ("delete")) new;
  	Return rowMenu;
  	}

• A program running in the background of my sequence

  In a first time to run a program in the background of my Teststand sequence, I'm trying to accomplish the very well detailed procedure that follows to run asynchronously a VI (my future intention is to call my a VI program which is running in parallel during the Teststand sequence).

  https://decibel.NI.com/content/docs/doc-21743

  I think that I followed every step, however my implementation was a significant failure: 'Asynchronous VI' does not close even if the concerned Boolean parameter is set to "true" and should be read by this VI...

  I guess I'm missing something obvious... But the fact is that really miss me! Can someone show me my mistake please?

  Thank you in advance!

  Attached you will find my sequence and VI.

  Hello

  (1) for your use case, you update the globals (stationglobals.ini) TestStand and VI reading station which should be fine.

  When the two try to update/write to-it will be a problem.

  (2) - I noticed that it is still impossible to read the outputs of the vi running in asynchronous mode in the main sequence: even when I write the result in a variable StationGlobals, it does'nt change throughout the sequence

  The globals station is a physical file (stationglobals.ini) which must be committed (saved) after updating the variable file in VI.

  TestStand also has to reload the stationglobals.

  Check this box:

  https://forums.NI.com/T5/NI-TestStand/writing-to-TestStand-station-Globals-from-LabVIEW/TD-p/3064530

  I hope this helps.

  Ravi

• How do we prevent a program run at the start or restart

  Windows XP Home Edition. Magic jack starts when I boot system and I don't want it. How can I fix

  Hello

  With the help of MS Config is always a good option, but you must be sure of what you are doing here because there are number of programs and services that are running,

  If you want to think easy and simple, you can use windows defender if you don't have the program, you can download it here

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=435BFCE7-DA2B-4A6A-AFA4-F7F14E605A0D&displaylang=en&mg_id=10134

  After you install windows defender

  You can open to Defender

  Click on tools

  Click Software Explorer

  And choose Magic Jack and disable at startup,

  You can also use this program to disable other programs you don't want to start when loading/starting allow your computer startup and load faster.

• Call the Web browser program compiles in 4.2 and upward but not 4.1

  I wrote a very simple application that when launched, opens the browser and takes you to a predefined binding. The following code compiles and works very well on the 4.2 and upward, but I can't seem to compile in the jde 4.1:

  package vwr;
  
  import net.rim.blackberry.api.browser.Browser;
  import net.rim.blackberry.api.browser.BrowserSession;
  import net.rim.device.api.ui.UiApplication;
  
  public class vwr extends UiApplication {
  public static void main(String[] args){
  vwr instance = new vwr();
  instance.enterEventDispatcher();
  }
  
  public vwr() {
  BrowserSession site = Browser.getDefaultSession();
  site.displayPage("http://www.google.com");
  site.showBrowser();
  System.exit(0);
  }
  }
  

  When I compile 4.1, I get an error related to the site.showBrowser (); command. But as I mentioned, the above code compiles and works fine on OS 4.2 and above. Is there a simple solution for this?

  Thank you in advance.

  Nevermind, I found a solution that works. Here's the code. I hope that someone else will find useful.

  import net.rim.blackberry.api.browser.Browser;
  import net.rim.blackberry.api.browser.BrowserSession;
  import net.rim.device.api.ui.UiApplication;
  
  public class vwr extends UiApplication {
  public static void main(String[] args) {
       vwr instance = new vwr();
       instance.enterEventDispatcher();
    }
  
  public vwr() {
      BrowserSession site = Browser.getDefaultSession();
      site.displayPage("www.google.com");
      System.exit(0);
    }
  }
  

• Programs running in Compatibility Mode (Windows 98) does not work (or more)

  For years, I have been (re-) installation file SETUP.exe (Epson status monitor of 1998) in Compatible Mode on a regular basis.  I right click on the file SETUP.exe, then I push properties-> compatibility-> Mode Compatible and complete under Windows 98/Windows Me.  Sometimes I run the file SETUP.exe in Windows 2000 mode also, never a problem.

  However, recently, I used DLLArchive and now the sweet Epson no longer works.  Resettlement does not either, as it must be installed in Compatible Mode and that no longer works.  In addition, run the file SETUP.exe in any Mode Compatible (Win95, 98, Me, NT, 2000) no longer works, even in non-compliant.

  I still get the same error:

  "To install EPSON Status Monitor 2, you have Windows95, NT3.1 or NT 4.0"

  While SETUP.exe is clearly compatible Win95/98.

  Earlier today, I couldn't use the Compatibility Assistant programs, whenever I had a "marscore.dll is missing" error when opening start-> Help and Support.  This problem is now solved: help and Support, and then the program compatibility Wizard work fine (I think).

  Any suggestions how to solve the compatibility problem?

  How can I check what DLL files are needed?

  Thanks in advance, Johan

  http://www.pcreview.co.uk/forums/unable-install-Epson-status-monitor-t2043535.html

  http://files.support.Epson.com/htmldocs/pro9k_/pro9k_rf/ref_G/statw_1.htm

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?OID=14422&infoType=downloads

• In Vista where is Task Scheduler program. I can get to it, but not directly.

  I had a problem with a batch program, I tried to plan.  Because I needed to plan several times as I made changes, I kept having to go throughHelp and support via the Start button.  The program itself must be hiding somewhere.  I solved my immediate problem, but there must be a better way to join the program.  Under XP, it is in the Control Panel, but notin Vista.

  I had a problem with a batch program, I tried to plan.  Because I needed to plan several times as I made changes, I kept having to go throughHelp and support via the Start button.  The program itself must be hiding somewhere.  I solved my immediate problem, but there must be a better way to join the program.  Under XP, it is in the Control Panel, but notin Vista.

  ========================================
  Take a look at the following article:

  Windows Vista - schedule a task
  http://Windows.Microsoft.com/en-us/Windows-Vista/schedule-a-task