programming the temperature

Similar Questions

• How to program the temperature exceeds the set point (sp), it will be reduced below sp

  I want to simulate a temperature between 15 and 30. When the temperature exceeds 26 it will slowly decrease until it reach below 26... I could only display in a different thermometer. How can I program it so that we can see the temp is reduced to a simple thermometer. Help me please?

  Publish what you have accomplished so far.

• Question about the temperature of the processor and the use of Vista on Satellite Pro M70

  Hello

  I have Satellite Pro M70-113 and it has Intel mobile Pentium 1.86 GHz CPU.
  The problem is that its normal temperature is 80 degrees Celsius... while I use the browser and other common programs...
  and recently it automatically shut off twice and pressing the button works / stop won't turn on... when I unplugged, replugged the power cord so I could only turn it on...

  And while playing games, it would of course go above 100 degrees...

  So you know what is the max temp through which the CPU can go without stop or damage the CPU or surrounding a circuit?
  I know that when I bought this laptop about 2 years back... it was not warm this...

  And by the way this laptop came with WXP Pro preinstalled and doesn't show any vista capable logo (because at the time, there was no such promotion of Microsoft, as it was the year 2005, Nov).

  Now, I use vista and upgraded to 1 GB of RAM and I have no problem using the Vista pc.

  Secondly, I did not update my BIOS to version the most recent is available.

  Although I'd love to have updated the BIOS but I worry about the bad flashing and says BIOS driver update page that the version of the BIOS doesn't support vista - whatever that means? If I go back to Windows XP Home edition after installing the BIOS for vista, the pc will not be usable for WXP or what?

  Is there any link to the processor heats to the old version of the BIOS, I'm still using... will update BIOS facilitated the temperature?

  Please answer.

  Thank you.

  Hello

  Wow, you have a lot of questions. :) If I was sort of a support guy to it all with such question much. ;)

  No, I'm kidding; with regard to your questions:

  First of all you must clean your CPU cooling with compressed air, because if the breakdown is clobbed with dust and then it s just logical that your processor is a little bit more 'hot' then 2 years before.

  The max temp is available on the website of intel. I think that the section is called "intel spec finder" or something similar.
  With Vista and bios: you need to update your bios, since then some improvements are making more compatible bios for vista.
  But don t worry, XP won´t be unusable if you update your bios, the bios-update brings improvements for vista, but does not degrade anything about XP.

  If the bios update will solve this temporary problem is not clearly, rather a cleaning as I told you will be better.

  Welcome them

• Qosmio F20-136: how to check the temperature of the CPU?

  someone knows how can I check what temperature turns or a program that will tell me and also is it possible to adjust fan settings?

  I have a Qosmio F20-136

  Hello

  You can find in the management tool of power under the method of cooling setting of the cooling fan.
  Try to set it to the lower level. I know that cooling fan is sometimes too loud, but you must know that you have high technology with powerful hardware components unit. Material is placed on the square and must be properly cooled to avoid damage.

  I really put t whether a tool can show you the temperature of the CPU. Check in the advanced search if you can find a similar topic. Long ago, I read the discussion on this subject.

  Good bye

• Select start measurment only if the temperature is less than 26 ° C for 10 seconds

  Hello

  I have a program for a measure of viscosity/temperature use DasyLab 12

  I burn my brain to try to activate the measurment only if the temperature is less than 26 ° C for 10 seconds.

  Click on 'Start', then control the temperature, if the temperature stay below 26 ° C, for 10 sec then allow to click the button "start measurment.

  If this isn't the case, restart the control.

  Thanks in advance!

  Ivan

  Simply enter the channel number. If this string has a name, DASYLab will automatically replace the figure.

• read the temperature of the chassis of a cRIO in Scan Mode?

  I am trying to create a section for monitoring my VI which monitors the status of the cRIO 9022 and backplane (9104) I use. I understood how monitor memory, CPU utilization, and the input power voltage.

  I know that you can monitor the temperature of the chassis using the FPGA options, but I want to keep my cRIO in Scan mode. Is it possible to access the scan mode chassis temperature probe?

  I found the solution I was looking for. NOR has built a VI to get the temperature of the cRIO, but it's not easy to find or in the open air.

  It is located here:

  c:\Program Files\LabVIEW 8.6\examples\CompactRIO\Controller Specific\9022 voltage and temperature Monitor\cRIO-902 x Support files

  "The cRIO-902 x Support Files" is a library that contains 2 VI is used for the sub - VI voltage monitor, and a third VI called "get Council Temperature.vi.

  Drop in the cRIO app and the Vi shows the temperature of the CPU cRIO in ° C card.

• Measurement of the temperature with the PCI-6229

  I was announced in an old thread and do not receive and answer, so I thought I try a new.

  Link to the old thread: http://forums.ni.com/ni/board/message?board.id=250&thread.id=14920&view=by_date_ascending&page=1

  I'm trying to measure temperatures using thermocouples using the PCI-6229 and I use two SBC-68LPR to make the connection.  They are not reference on them joints.

  After moving down from enugh to careful reading of the old thread I mentioned above and I think I knew what I should do.  Here's what I do now:

  Create a task - DAQmxCreateTask

  Create a channel for this task - DAQmxCreateAIThrmstrChanVex thermistor

  Create a number of channels of thermocouple for this task (DAQmxCreateAIThrmcplChan) using the cjcsource DAQmx_Val_Chan option and specifying the string thermistor as the source channel

  Start this task - DAQmxStartTask

  Get the temperatures - DAQmxReadAnalogF64

  Stop the task - DAQmxStopTask

  Disable the task - DAQmxClearTask

  I have not yet hooked, but I doubt that it is the cause of the error.

  A few more details (pardon my Delphi):

  Create the channel of the thermistor

  TmPcName: = ' Dev1/IA.19 ";

  Secret: = DAQmxCreateAIThrmstrChanVex)
  TcTaskHandle, / / task handle
  @TmPcName, / / physical channel name
  @TmChName, / / name of channel
  -80,                                   // Min range
  80,                                    // Max range
  DAQmx_Val_DegC, / / units, ° C
  DAQmx_Val_ResistanceConfiguration_4Wire, / / 2-wire, 4-wire, etc.
  DAQmx_Val_ExcitationSource_External, / / source of excitement, external
  1, / / value of excitement
  9.376e-4,                         // a
  2.208e-4,                         // b
  1.276e-7,                         // c
  30000);                            Resistance of reference

  Creation of the channel of thermocouple:

  TcPcName: = ' Dev1/ai23;

  Secret: = DAQmxCreateAIThrmcplChan)
  TcTaskHandle, / / task handle
  @TcPcName, / / physical channel name
  '',                                     // Channel name
  0,                                    // Min range
  1000, / / Max range
  DAQmx_Val_DegC, / / units
  DAQmx_Val_DegC, / / type of Thermocouple
  DAQmx_Val_Chan, / / source CJC
  25, / / value of CYC, so DAQxm_Val_ConstVal
  @TmPcName);             CJC channel, so DAQxm_Val_Chan

  It looks like 4 scales is required for voltage excitement thermistor measurements.

  In addition, it seems that external excitation is necessary in my case, PCI-6229.

  Everything works if I use a CJCConstant.  When I do this I use the same code to create channels of thermocouple, but I spend creating the channel of the thermistor.  When I try to use a CJCChannel I get an error saying "value required is not supported for this property value," which occurs when I call DAQmxStartTask.  I don't have no idea of what this message refers to and the best I can tell the properties that I've specified sense.  The constant termistor are from actual thermistor, that I found on travailleursduweb.com.

  I could also use some help to know how to connect the thermistor.  Looks like I need to fab, a thermistor circuit myself, with a stable voltage to power the termistor and use a double-ended analog and reference to the channel.

  Thank you

  Mike

  The error of thermocouple type was a type-o in the post.   Thanks for catching it.

  I think I found the problem.

  I wrote a small program to test for Thermistors and I went to using the routine exctation of tension for a common routine of excitement (... IEX instead of... Vex).  I had been by specifying a minimum value less than 0.  I changed it from-80 to 0, and it works now.  However, I got an error in division by zero, intermittently, when you read a thermistor channel.  The error is not in my code.  It occurs when you call DAQmxReadAnalogF64 for the first time and I'm not all mathematical related to this call.  I'm still looking into it.

• How can I program the machine of the time's up

  How can I program the machine of the time's up

  Time Machine is designed as an incremental backup system. It defeats the purpose it is only work one or two times a day, etc.

  If you want anyway, there are third-party solutions such as TimeMachineEditor and TimeMachineScheduler.

• Satellite X 205-S9349 - Question on the temperature of the GPU

  Hello

  I bought a * Satellite X 205 - S9349 * 10 months ago a recently installed a temperature monitor for the nVidia 8700 M GT card. When using 3d modeling applications, I recorded the average temperature in * 97 degrees Celsius *.

  The computer translates a temperature idling of * 60 degrees *. The computer is present in an air-conditioned room, which is in the average temperature is * 19 degrees *.

  What's the normal functioning of the X 205-S9349 temperature when it is at full load?

  This temperature may harm my computer?

  Is that what I can do to reduce the temperature without voiding the warranty offered by Toshiba?

  Thanks in advance,
  Pabst

  PS: I stalled the back of my computer to the top so that air can easily circulate through the bottom.

  Hi Pabst

  In my opinion there is no reason to panic. If you use the original display driver laptop Toshiba is protected and if the laptop will not appear at the level of the critical temperature will stop automatically to avoid damaging the material.

  With rear shoring is great idea. Sometimes I do the same. The laptop can be cooled much better. And one more thing: don't always believe that show these third party applications.

  Good luck!

• Satellite 1800-814: how to measure the temperature of the processor?

  I replaced the radiator component on my laptop as it freezes suddenly during the operation. Now everything seems to be better, but still a last question. How to measure the temperature of the processor?

  Dominic displays only HDD temp and MBM profile for 1800-224 display cases and the cpu. But if I can use this profile? Any other ideas how to meausre CPU temp?

  MBM shows me around 40 to 49 ° C for the cpu. Is this normal or too high just to run windows?

  Thanks in advance

  Greetings
  Jens Grieger

  Hello

  See this http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=5564&messageID=19417

  Maybe the help!

• Can I program the keyboard to function as back & front key in Firefox

  I changed my keyboard and mouse for a USB combo Logitech MK250 wireless and my mouse has no buttons next and previous.
  It would be nice to program the button arrow left back and right-arrow to pass if possible.

  You can also use Backspace and SHIFT + BACKSPACE if you set the browser.backspace_action pref 0 (default value is 2 on Linux to disable this feature).

  http://KB.mozillazine.org/browser.backspace_action

• Why the temperature shows on my watch always different temperature on the watch of my husband when they use the same application?

  Why the temperature still showing on my watch shows a different temperature than on my husband watch when they both use the same weather app?

  Hi Jodie

  If you are each using the weather app (which is included in the framework of the iOS and watchOS), the following steps can help (followed by each of you):

  • On your iPhone, in the weather app:
    • If using anything other than the current location (which is included by default), make sure you have each added to a common location / city.
    • To add another location, select the icon «+»
  • On your iPhone, in the application of the watch, go to: My Watch (tab) > weather > default City > make sure you have each selected at the same location (for example: place of current residence or Mount Laurel).
  • On your iPhone, go to: settings > privacy > location Services:
    • Ensure that the location service is enabled;
    • Make sure Apple Watch is face value while it helps;
    • Check that the weather is set to always;
  • On your iPhone, go to: settings > general > background App update:
    • Check that the bottom App Refresh is enabled.
    • It can also help to activate the setting for the weather.
  • For optimal performance of your watch, keep the Bluetooth and Wi - Fi enabled at all times on your iPhone:
    • iPhone: settings > Bluetooth - on.
    • iPhone: settings > Wi - Fi - on.

• Qosmio F50-108 - is the temperatur for 9700M GTS ok?

  Hello!
  I have a guestion temperatures on this GPU. My computer turns off twice while he was playing so I decided to take a look at the CPU and GPU temperatures. SpeedFan show that the CPU at rest is 54 and 56 for the Core 1 and 2 and 98 degrees for the GPU. What is the normal temperature of dor this map or should I worry?

  Thanks for the replies.

  Can you post what laptop Qosmio you have?

  In addition, I would try to clean the laptop with a jet of compressed air. You can buy this with a computer dealer and this could blow the dust from the cooling fans.

  I think that the temperature is too high because the laptop stops himself.
  Do you use the dirver Toshiba or nVidia?

• Question about the temperature of the processor on Tecra 9000

  Hello. I would like to know what are the current temperatures for Tecra 9000 1 GHz. When I run an intensive application processor like Prime95, the temperature rises to 59 C. Isn't too much? Yes and I also recently replaced old thermal compound with AC MX-1.

  Thanks for your replies.

  Hello

  Thus, 59 c are quite OK, that they are almost under the PDT of the CPU. If the temp would be more than 70 ° C or more then it would be critical but not to 59 C. The Pentium 3 M should typically generate a higher temperature if your CPU is, comparing to another cooler system. Could be also dependent on the applied paste you´ve cooler...

  Don't worry Don t, everythings OK. :)

  See you soon

• Question about the temperature of the portable equipment

  Hello

  What is the temperature in your computer? I'm afraid my computer because when I'm working temperature is 44 - m 70 degrees c. (!) and I don t know what temperature is normal.

  Can you please tell me?

  Hello

  Believe me there is absolutely no reason to be afraid about your hardware. Temperature between 44 and 70 degrees C is normal. At the moment the temperature on my laptop satellite is as follows:
  CPU 55 degrees C
  Drive HARD 44 degrees C.

  In your case, everything is OK and just make sure that the cooling fan is not blocked and there is enough room for air circulation. All that s!

  Bye and bye!