Programs list is empty.

Similar Questions

• Why the my Add/Remove Programs list is empty?

  I had trouble getting the updates of windows install, and now I noticed that my Add/Remove Programs list is empty.

  See if this article helps you:

  "Add/Remove Programs tool displays installed programs correctly"
    <>http://support.Microsoft.com/kb/266668 >

  "Add and remove programs appears white OR takes a long time to fill in the information."
    <>http://support.Microsoft.com/kb/2249920 >
  HTH,
  JW

• All programs list is empty

  Hi I had viruses on my computer but I could remove that now when I went to the list of program all its saying "empty list". Help me get back the programs?

  Hello

  Try the fix to the article below and check out them.

  When you point to "Programs" on a Windows XP-based computer, the program list does not appear, or the list of programs is empty
  http://support.Microsoft.com/kb/941248

• Add/Remove Programs list is empty in XP

  My list of programs does not fill the screen, so I can change or remove programs.  Why?  It just keeps running and nothing appears

  Hello

  You can try the solution listed: http://support.microsoft.com/kb/266668

  I hope this helps.

• I get all the programs listed under my program menu on the start menu, but they all show empty and all my programs are in c/programs as it should.

  My computer was infested with viruses, Trojans and so had all digitized and clean, but all my programs listed in the start menu there are the EMPTY list.

  I have downloaded and run the Microsoft Fixer ( http://support.microsoft.com/kb/886549 ) and everything is the same.

  Any help will be much appreciated.

  Thank you!

  Jorge.

  Hi DandyBaron,

  ·         You are not able to access these programs at all, or simply not start menu?

  Follow these methods in the order and see if the problem is resolved.

  Method 1: Follow the steps and check out them.

  a. open an Admin command prompt window. To open an administrator (high) prompt, click Start, click programs, accessories principally made, right click Guest and then click Run as administrator.

  b. in the command prompt window, type the following command and press ENTER:

  regsvr32 msxml3.dll

  c. closing session and you connect again to your user account and see if the menu items are displaying correctly.

  Method 2:

  Step 1:

  I suggest you analyze your computer Microsoft Safety Scanner, it will help us to get rid of viruses, spyware and other malware

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Step 2: try the SFC (System File Checker) scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information helps.

• "All programs" list empty

  Yesterday, I noticed that when I click on "All programs" in the Start Menu, there are all the programs listed. I can still access all of C:\Program Files, so I know that I've accidentally deleted all the programs. Is it possible to restore them to "all programs"? Attached is a link to my "All programs" list look like now.

  Hi LisaEB,

  1. you remember to make changes to the computer before this problem?

  It seems that if you have something close to 70 or more shortcuts/folders in the all users folders & Start Menu/user combined program, the list of all programs will eventually be empty or empty. Check the number of recent programs that can be displayed in the Start Menu.

  Method 1:

  a. click Windows orb to open the Start Menu.

  b. right-click on all programs, and then select open.

  c. double-click the folder programs. There should be a list of folders.

  d. create a new folder.

  e. Select a bunch of files in the folder programs and drag the folders to the new folder.

  f. restart your computer and check if the programs are shown when you click on start > all programs.

  g repeat the above steps until the list is displayed in all programs.

  Method 2:

  You can also try the following steps and check if it helps...

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  Back up the registry

  a. Click Start and type regedit.exe.

  b. Select regedit in the search list.

  c. now, navigate to the following keys:-
  HKEY CURRENT USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders

  d. the value of Start Menu to "%USERPROFILE%\Start Menu".

  e. go to HKEY LOCAL MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders.

  f. common value Start Menu to "%ALLUSERSPROFILE%\Start Menu.

  g. close the registry editor and restart the machine.

  Hope this information is useful.

• can't see installed updates_says no updates installed (windows on_off list also empty features)

  I installed windows 7 ultimate (32 bit) on three new Vostro (I - 5) machines and all the updates and software that we use. Then Windows Update list says "no installed updates" and features Windows on_off list was empty. To i.d. the problem I reinstalled win 7 ulimate (32 bit) and all of our programs on one of the new computers. After every installation or Windows Update, I checked Windows Update/Installed Updates list and the list of windows features and all the elements included (visible). When most of the installation path through the updates to ArcGis 9.3.1 a flag came who said two critical windows updates were available. We stop at installation of ArcGis for windows of the road updates. After you run the windows updates XML Core Services 4 SP2 (KB973688) and an update of security for the same (KB954430) I went back to check the windows update list and he said "no updates installed on this computer" also, nothing has been shown and list of windows features box was empty. Tried to roll back to a previous time, but that doesn't seem to work. Automatic update still seems to work, but we cannot see the list so that we can remove individual updates... What is happening and what can be done, any ideas, thank you.

  I thought that I should let one more message for anyone after that because I think that the problem is solved. I googled on the number 'KB973688' and "Arcgis 9.3.1" update it lead me to a thread that has referenced the following urlhttp://forums.esri.com/Thread.asp?c=93&f=1148&t=287391#902480 . It offers a solution to change the registry size limit. It seemed risky, but it worked all updates are now visible and windows features on_off shows what should be. Two updates came back and auto installed but now did the damage. They do not appear on the list of Windows Update, but the rest don't. Maybe install Arcgis was the culprit

  for Win 7. All three new machines work properly, thanks again for your support.

• Add or remove programs list has an extra space with black blocks and white space.

  This problem causes the list to be VERY long with some programs listed at the top, and then, many white and black spaces blocked in betweent the rest of the programs.  I do not have autocad and I ran the .exe that true negative results in Exposeicon.  None of these have solved the problem.  I had this problem for a while, so I don't know what to install or uninstall caused this problem.  Does anyone know what anyone else for this problem?

  Thank you.

  I did some more research online and found another thread on this problem.  I downloaded 'Add Remove Pro' from the list of items on the list provided by this software and a list of the computer gives me.  I uninstalled a few programs that have been identified between the programs before and after the empty space in the list given to me by the Add/Remove on my pc.  After you have uninstalled a few things that have been in the interval and restartig the pc, the empty space is left.

• Something has happened to the "programs" list when I click on 'start '.

  Lasst Saturday when I was on the computer, I must have done something - I have no idea what - but all my icons disappeared and when I click on start and then all programs - all programs that have been missing there. I tried everything I can thru & assistance. It doesn't let me do a "System Restore" back in the day where the night before, he started. Any suggestions are appreciated!

  Hi KimBrusenhan,
   
  -What exactly happens when you try to perform the system restore? You receive an error message or error code? If Yes, indicate the same.
  -What version of Service Pack of Windows XP you are using?
   
  These problems occur if the value of the Start Menu common registry entry is inaccessible or if the value is not valid. In this case, Windows XP cannot initialize the shell program.
   
  Method 1: Try this method and check if it helps to fix the problem:
  Connection to an account administrator and do the following:
   
  a. Click Start. Click run.
  b. type the following command and press ENTER:
  regsvr32 /i shell32.dll
   
  Regsvr32
   
  Method 2: If you use the version of Windows XP Service Pack 2, then download and install the hotfix from the link below and see if the problem is resolved.
   
  When you point to "Programs" on a Windows XP-based computer, the program list does not appear, or the list of programs is empty
   
  If you use the version of Windows XP Service Pack 1 or 2, I recommend you to upgrade to Windows XP Service Pack 3 version that will improve the reliability of Windows by installing the software - new drivers for hardware updates and much more.

• Internet Explorer (64-bit), absent from the "All programs" list

  How can I restore Internet Explorer (64-bit) to the list of "all programs"? I dragged Internet Explorer (64-bit) of the "All programs" list on the desktop. Then, by accident, I deleted this shortcut that went in the trash that I actually empty after.

  When I clicked on the start menu and the list of 'All programs' again the link to Internet Explorer (64-bit) was missing to my dismay. Is - this from there anyway I can get Internet Explorer (64-bit) to show again on the list "all programs"?

  Windows 7 Home Premium

  Hi Sylvia,.

  I would ask you to check this link to install Internet Explorer, try the steps based on the operating system installed on the computer.

  http://Windows.Microsoft.com/en-us/Internet-Explorer/install-IE#ie=ie-11

  Let us know if you have any questions with windows and we will be happy to help.

• Installed the programs see the emptiness on the Satellite A350-212

  Hello

  I hope someone can help here. My brother left England in the Turkey a couple of years ago and his cell phone, which was the United Kingdom's irreparable, so he bought one in Turkey, A Toshiba Satellite A350-212 and has problems with the downloads. For example he downloaded a free trial of Coverxp and he seemed to download ok and asked if he wanted a shortcut on the desktop. He said yes to the shortcut, and as I say, it seemed to have installed ok.

  The iicon office never appeared and the Coverxp in all programs also shows empty.
  This is the case for most of the things it has downloaded, such as the trial version of Winrar.
  In programs and features uninstall, applications are here. In my view, this could be a security problem.

  All the things he tried to install it I installed on Vista without any problems

  If anyone can help with information ill be most gratefull

  Thank you.

  Hi mate

  First I put t think it's a problem of Toshiba.
  I recommend saving the downloaded packages somewhere on the second partition.
  Then go to that partition and unzip the package.
  Then follow the installation instructions.

  By the way; shortcuts on the desktop can be created manually.
  Simply right-click on desktop and create a new shortcut and point to the exe of the installed software.

• Generic icon in the Add/Remove Programs list

  Hello to you all, useful forum fans!

  I have a nice custom icon that I built in my specs of the executable version, but when I use an installer to install my program, the icon in the Add/Remove Programs list is the software generic one (with the box open and CD).  How can I get my custom icon to use in the list as well?  I'm using LabVIEW 8.5.1 (and wishing my company should pay for 2010! ).

  Thanks for your help,

  -Joe

  
  

• Try to build the application, the screw startup list is empty

  Hi all

  I am following the directions on this page:
  http://zone.NI.com/reference/en-XX/help/371361G-01/lvhowto/building_a_stand_alone_app/

  But somehow, when I get to Statup screw selection stage, the list is empty and cannot add the VI I intend to use it. Why is this happening? What step am I missing?

  Isaac,

  The first step in the help file you cite says «Open the LabVIEW project...» ».  You have your VI within a LabVIEW project?  If you want help with your Build, it would be useful to look at the project.  The best way to proceed is to implement the project (and all the screws, you wrote that belong to the project) within a Windows folder, compress the file (at one. Zip file) and fix it. Zip file.

  Bob Schor

• Free space on my Add/Remove Programs list.

  Add/Remove Programs list my I have a microsoft. NET framework 1.1, and then service pack 2 microsoft 2.0 framework finally framework 3.0 service pack 2.0 microsoft... question is do I have all the three for what these programs are run or can I release a few MB, but 2 uninstall?

  Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

  See...

  Aaron Stebner's blog: Mailbag: need should I even older versions of the .NET Framework on my system after installation of .NET Framework 3.5 SP1?
  http://blogs.msdn.com/astebner/archive/2009/04/20/9557946.aspx ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• NUANCE has a software called "SOFTWARE MANAGER". Please change windows XP Professional to list this software in the Remove Programs list. I can't remove it and it is full of ups popp. So boring.

  NUANCE has a software called "SOFTWARE MANAGER".   Please change windows XP Professional and VISTA to list this software in the Remove Programs list.  I can't remove it cause it used to list and it is full of ups popp.  So boring.

  Otherwise, keep up the good work microsoft.

  Concerning
  Gary

  Hi Gary,.

  We will try to uninstall this software by using Microsoft fix - it Manager.
  Refer to this link:
  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/program_install_and_uninstall

  Also perform a virus scan full assistance Security Microsoft scanner.

  See this link for download:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  After completing the methods suggested above, answer us with the State of the question.