Project failed and the project of packaging is not loaded to the Simulator
Hello
Whenever I run the bb Simulator on my Eclipse, it always gives me "Packaging project failed" and my project sometimes appears in the downloads on the blackberry Simulator (even it is not in the package), but most of the time, it says "Module not found" or it is not loaded in the Simulator.
What is the cause of this problem and how to fix it? Thank you.
I use the Simulator to 9700 with OS 5.
Hi all
I just tried to restart my laptop and it works all of a sudden. I still don't know what the problem was, since there is no error before packing 'failed '. I hope that never, it will fail again.
Thanks to all for the replies!
Tags: BlackBerry Developers
Similar Questions
-
Why I can't update windows and fail. and the error is 0x8007001F
Why I can't update windows and fail. and the error is 0x8007001F
How to reset the Windows Update settings?
http://support.Microsoft.com/kb/971058and/or
Claire on your temporary internet cache.
and/or
Rename the folder C:\Windows\SoftwareDistribution
In the run box, type services.msc.
Click OK.
Right-click the automatic updates service.
Click on stop.
Stopping the service will take a moment.Rename the folder "C:\Windows\SoftwareDistribution":
a. Click Start, click Run, type %any and then click OK.
b. right-click on the C:\Windows\SoftwareDistribution folder, and then click Rename.
c. Type SoftwareDistribution.old, and then press ENTER to rename this folder.Click Start. Choose run.
In the run box, type services.msc.
Click OK.
Right-click the automatic updates service.
Click Start.
Starting the service will take a moment.Restart if necessary and try and update again.
You will notice that you will lose your history of updates, but it's not important.
If everything works well again, you can delete the old renamed folder.
-
My Windows telling me that he needs 11 updates. These consistenly updates fail and the Microsoft fix did not work. Error codes are 641 and 80070641.
Hello
Did you change your computer before this problem?
You can follow the suggestions and check out them.
Method 1
You can follow the procedure in the article.
How to resolve problems connecting to Windows Update or Microsoft Update
http://support.Microsoft.com/kb/818018
Method 2
You can reset the Windows Update components.
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.
Back up the registry
http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registryHow to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Method 3
You can download and run the system update readiness tool.
Description of the update tool of the system to Windows Vista, Windows Server 2008, Windows Server 2008 R2
http://support.Microsoft.com/kb/947821Method 4
Step 1:
Place the computer in a clean boot state.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a troubleshooting follow step 7: reset the computer to start as usual
Step 2:
You can manually download and install updates from Microsoft Download Center.
Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspx
Method 5
You can disable temporary of your security software.
Disable the antivirus software
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks
See also:
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
-
Anyone had this problem before? I do a HTTP request and then according to the return add another to my queue and the other repeatedly fails on the Simulator. However, I tried to run on the device and everything worked perfectly. I know this is a pretty vague description, but I was wondering if there was any problem known about. He could make debugging in the simulator that is very difficult in the future.
marchywka, I think it has something to do with the WiFi in the Simulator. It works the first time, but in certain circumstances later fail.
I couldn't understand it, but I decided to not use WiFi when it is the Simulator and use WiFi on the device.
-
I have a license for Design CS6 and Suite Web and applications downloaded, but they do not load or ask for activation. What should I do?
It's a Mac and finally got to window that let me enter the license key and it works. I thank you for your response and departure to help!
-
When I turn on my computer, WindowXP rises and few seconds more late two small boxes with the "DLL Load Failed" and doesn't have a keyboard shortcut appears. I rebooted into «Safe Mode "and it's good that someone can give me a solution?»
Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.
Microsoft has suggestions and offerings to
http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus
Moderator Forum Keith has a few suggestions along this line to
If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.
You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type sfc in the search box, right-click to SFC. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.
Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.
I hope this helps. Good luck.
-
BlackBerry Smartphones Blackberry Bold 9930 update failed and the software does not load
I have a Blackberry Bold 9930 and yesterdasy I received a msg saying to upgrade to 7.x software Blackberry. I followed the instructions (takes too long like 2 hours to download) and then. Big mistake because it cooked my phone. It seems that when you upgrade, the upgrade process goes thru, but stops after the time zone to restore the process and reports an error 602 with a reset button to reset your database. The reset button does not work and I restarted the phone to restore the db. At the moment that it restarts, launched the process, and even once, it failed after the msg indicating time zones (100% and overall restoration treatment 7%). Zones roughly completed, but then I got a msg saying I wandered 602 belive. On all courses was about 5 to 10 percent. Now my phone is undesirable because it does not restart. Verizon says they have a large number of phones across the country, but BlackBerry says it's a matter of Verizon... Someone at - he already heard of this I am now without such a 4 days while I get a replacement Friday because of the holiday... I am not very happy as another question, I found - during the upgrade process it used the cells instead of my wirelss home network to download the software and it really took about 2 to 3 hours, then another hour before it failed during the upgrade process. So about. 3 to 4 hours to play with an upgrade yesterday.
Thank you
Rich
Hello merlin02131
Welcome to the Forums of the BlackBerry Support
Sorry to hear about the problem you are experiencing during the update!
But you can still use Desktop Software for the update process, personally, I prefer never to do an Over the Air update. I think that something has gone wrong with the update process and thus you encounter this error 602.
You have a backup of your device, or using BlackBerry protect for the backup?
If you wish you can try several method to recover your device of this error, all you need is a PC and an Internet connection active. But attention, this method deletes the data user in this device. This is the Knowledge Base to follow:
KB10144 : How to force detect the BlackBerry smartphone using the Application Loader
Additional information:
KB29237 : "App Error 602" appears on the BlackBerry smartphone running BlackBerry 7
-
Whenever I try to install I get message that he had failed. The error code is U44M1P7. What is the problem with this update?
U44... Update error http://forums.adobe.com/thread/1289956 can help
At some point in the past (I don't know the exact date) Adobe "merged" the original update manager in cloud Update Manager, which means that you no longer use your original update manager
I read a lot of posts that the updater latetest (cloud) sometimes does not work with old programs... Try to install your updates manually
Beginning of the updates here and product selection, read to see if you need to install updates in the order of the numbers, or if updates are cumulative for the product http://www.adobe.com/downloads/updates/
-
C7280 - software fails and the driver update/install
Hello world
I am new to the forum and would greatly appreciate your help.
I have a Photosmart C7280 all-in-One connected to the network via ethernet and running Windows 7 64 bit with maximum until recently worked ok.
However, I came to do a scan today and the software was missing! (not too sure why)
I decided to download the .exe on the site of HP PS_AIO_02_Net_Full_Win_WW_130_140 and uninstalled all the relevant software. This has been done successfully, but when I try to reinstall it gets as much as control systems and application updates and then just hangs!
I tried this at least 6 times now and even tried to leave the firewall, restart, USB connection and all without success
If anyone has had similar problems and could help that would be great.
Thanks in advance
David
Hello pads,
When you run the installation, during the "system check", a pop up window would be, which gives information on...
- Who lead the s/w would be installed.
- Customization of the installation, as in what applications you want to install.
- Connection to the Internet.
Click Internet connection, and then there will be 2 options displayed it on. Select the 'NO' on each of them, click on OK and then OK to continue the installation. It by installing would go smoothly.
Kind regards
Jabzi
Your question has been answered? Mark it as an acceptable Solution.
See a great post? Give a Kudos! -
Of course miss me configuration here but something despite the (active) configuration and create a simulator, I run as application Tablet and I get
Package failed: 1
Error: File or dir does not exist: C:\apps\bbndk-2.0.0-beta1\target\target-override\x86\usr\lib\libbps.soIt is the same for all the example HelloWorld etc.
If I create the model opengl application I can run on the Simulator.
I'm sure that this has been answered, but I'm not so all suggestions accepted with gratitude
See you soon
Bob
H, Bob,
Just remove the good of your bar file libbps.so - descriptor.xml. You don't need for deployment on the 2.0 OS.
If you still need to deploy on 1.0.x OS, then it becomes more complicated.
HTH,
Christian
-
Hello. Can someone help me with this please, I got a few responses but they confused me a bit, all I need is a simple link to download a solution please ohn
CS2, Acrobat 7 + Audition 3 (AND PREVIOUS) activation server has disappeared, then read below
l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm
.
You MUST use the special version and the serial number on the page, not your original drive or serial number
.
NOTE that CS2 will not install on a "modern" with an Intel Mac
When you install the special version of the PPro2 on a Win7 or Win8 or Win10 computer, you may need to right click on the program icon and select compatibility Windows XP in the popup of option
-
Pavilion dv6: I did now the hard drive on my HDD test failed and the pavilion dv6
The problem is that my laptop when I start it it takes like 10-15 minutes to load.
I see loading windows xp logo and then he is suspended for more then 10 minutes or more.
Now, I tried to do a test for the material. I turn on the laptop and click the F2 key and I entered the test screen of hp hardware. I moved start test drive hard and after 5-10 seconds or if stopped with a test failure:
That's what I see now on the screen of the laptop:
Test Drive: 1
INTELLIGENT control: PAST
DST short: FAILURE
FAILURE ID: 64WE1A-5BC7Q7-XD003F - 60Q 903
PRODUCT ID: XE041EA #ABT
Hard drive 1
Edit:
I tried now all the other tests in the F2 screen, and they all went except the short DST hard drive that has failed.
Better to buy a new hard drive and replace it with this one and I install the new OS on it own?
Test drive: FAILURE
Does that mean ID failure? I need to replace with a new hard drive? If so can I buy a new hard drive and replace it only with myself?
I did no other reviews but I want to first of all understand what it means to id of failure.
Hello
The hard drive is faulty defiantly and Yes should not replace. Failure ID is given, so if your laptop is under warranty you can give this to HP and it will then allow you the replacement
Usually the instructions on how to replace the hard drive are in the manual of your computer that you will be able to get a copy on the HP site. You can also buy the HP installation media which will be operating system files on your for reinstall on the new hard drive.
-
Updates were recently fired the SW update. I have installed all the other updates the BIOS etc successfully, with the exception of the wireless Lan driver. Instead of doing an update, it has disabled my wireless totally when he said that the installation has failed.
During my first attempt, I downloaded the driver 100%. Then a pop up message appeared saying that "the installation may take several minutes", and then another Intel logo appears and disappears, but said later that he could not install. After that, I get disconnected from my internet connection. No sign of wireless activity were found. I tried to watch the wireless icon and it was gone. I tried to solve the problem and it says that the only device for my wireless connection is Bluetooth.
I thought it was just the problem of internet connectivity, so I tried to download the next day, but this time while being connected to a local network. The same thing happened to downloaded 100% and does not once again during installation. I just want you to know that I closed all applications and my laptop plugged in during installation if it helps your troubleshooting. I asked SAMSUNG support and they told me that the problem is with Microsoft, so I should ask them.
I tried to update for like 5 or more times, but it's the same thing. I use my laptop for work and it's like I can't live without my wireless LAN are not always available. Download of the update becomes tedious because I have to wait like half an hour to finish the download only to find out that the installation will fail. I searched his driver I can install it manually but its nowhere to be found, looks like I'm stuck with SW update
Hi Saloni,
Thanks for posting your query on the Microsoft Community.
Here in this scenario, I suggest you try to re - install the latest driver for network/wireless connection on your computer and check if it helps.
Step 1:
Download the driver for the network adapter / wireless computer/hardware. Visit the Web site below.
http://www.Samsung.com/AE/support/model/NP500P4C-S08AE
Step 2:
Uninstall the driver for Wireless LAN / network card.
Follow the steps to uninstall the network adapter driver:
a. press Windows + X keys, and then click Device Manager.
b. search for network card.
c. right-click the WLAN network adapter , and then click Uninstall.
d. follow the command prompt, and then restart the computer.
Step 3:
Install the network card driver / wireless that you downloaded from the website of the manufacturer of the computer/hardware.
Please reply with the status of the issue so that we can better help you.
-
Adobe will not work. Lightroom need to work. Tried to uninstall Lightroom and creative cloud, they stopped working when my payment failed. After putting in the new mode of payment that they still do not work. Now don't reinstall it on mac 10.10.5 after several attempts and reboots. Also, if anyone knows a phone number for adobe support. I tried to find one, but it just shows that I have are not eligible for phone support... I pay for a product, I can call someone!
allow a day of pst for your payment to process. It is currently Saturday am pst.
then check your account to see if it's what you expect.
Otherwise, contact adobe support during the time pst by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html
If it shows your subscription is current, Troubleshooting FAQ: what should I do if I have a subscription, but my application acts as if I had a trial?
-
PS CC update failed and the application will not work
I'm on a mac (mavericks, updated)
iMac late 2013
CC update starts downloading but stop at level 55-60% with error update failed.
I really don't care about the new features and tried to use the existing application... no joy at all... nothing... my worst fears about this idea of stupid auto update subscription are are produced.
Adobe chat is saved llike mad...
Anyone know how to restart the application on a mac?
Thank you
Tom
Jeff-
After a short wait, I finally received a phone call from an adobe call center and resolved the issue. It took almost 2 hours on the phone.
The final resolution was uninstall and use the tool cleaning of adobe to remove all traces of the original install PS, then reinstall the application.
Not enough, but back up running.
Thanks for your comments.
See you soon,.
Tom
Maybe you are looking for
-
How do you access tabs when "full screen," tabs on top «?»»»
Hello In mode "full screen", it is possible to quick access by mouse tabs to the top of the screen in a hover. This behavior does not occur when "tabs on top" are disabled. Hover of the mouse to the top of the screen does nothing. Am I missing someth
-
How is it windows will not recognize the flash drive, I just download?
-
Original title: Remote Desktop We have Windows Server 2012 essentials (evaluation version) installed and working. When connecting to even via the remote desktop connection it works fine, but when a second (another) user tries to connect using the co
-
PictureScrollField + 6.0 = >; resizing of images
Hi everyone, it's me again. I have a compiled application under 5.0 that great workd with touch device like storm (5.0), but which has some leaks when I start under 6.0 I have a pictureScrollField that hold virtually all the screen, less than 5.0, wh
-
HelloI reinstalled our computer, now I downloaded creative to download Photoshop, Lightroom and cloud first.I get only TRY not to install, why?Yes, I pay student each month.ConcerningMaria