ProLiant DL380p Gen8 drivers

Similar Questions

• HP proliant ml310e gen8: can't the Nic Server 2012 team

  Hello everyone hope everyone is great

  I have a hp proliant gen8 ml310e I have a problem, do the 2 Nic set interfaces

  I tried 3drivers the

  1 Microsoft driver by default with windows server 2012

  2 broadcom driver the latest driver directly from the Broadcom website

  3 hp driver from the drivers from the Hp site for this model

  When I go and try to create a Nic team a mistake occurres and Nic fails creative team I also tried doing it through power shell operation has expired: TeamNic installation has not completed on time.

  I tried a clean format

  System specs

  HP proliant ml310e gen8

  Broadcom NetXtreme Gigabit

  Server Windows 2012

  Hello:

  You can also ask your question on the Forum of Support Community Business Enterprise HP - ML servers section.

  http://community.HPE.com/T5/ProLiant-servers-ml-DL-SL/BD-p/ITRC-264#.Vp1hReT2bGg

• VMware in ProLiant MicroServer Gen8

  Hello

  I just want to know if I can install any Vmware Esxi on this server http://www8.hp.com/es/es/products/proliant-servers/product-detail.html?oid=5379860#! tab features =

  I was looking in the VMware compatibility guide and didn't find it.

  In any case, is there any Posibility to run any version of esxi vmware on this machine?

  Thank you

  Kind regards

  Matias

  Yes. I can see everywhere the internet is flooded with info it works with vmware.

  And like its Gen8 so I should say vmware is normally supported by him.

  Here are some links that you ensure that it will work.

  http://Seiler.it/VMware-ESXi-5-5-installation-HP-ProLiant-MicroServer-gen8/

  HP integrates the enterprise features the new Gen8 MicroServer

  It will support up to the latest version as you can see that all custom esxi image is available for this type of material. so no question you can go forward with the same model.

• problem with VDGA on ESX 5.5 and NVIDIA K4000 (on HP DL380P GEN8)

  I use the K4000 GPU NVIDIA card on a HP DL380p Gen8 vDGA passthru server.

  Since I've upgraded to ESX 5.5U1, I get the following error message when you try to start the virtual machine:

  'Impossible to save the pciPassthru0 device for 04:0.0 because of unavailable hardware or software support'

  And in th vmkernel.log:

  "04:00.0 device cannot Ωtre utilisΘ for passthrough due to a region of memory in conflict with the virtual computer's memory"

  Firmware BIOS of the server is the last.

  Already tried to deal with the pciHole.start parameter and no go.

  Tried to change the size of memory VM at different levels and still no go.

  Virtual machines worked very well with 5.1U1.

  Any ideas?

  Try changing the possible PCI slot.

  Are there no other setting in the BIOS that apply here, the designation is different from each supplier and is located in different places so take a look in all possible places in the BIOS.

  Also make 100% sure you have the latest version of the bios available at HP.

  Linjo

• ProLiant ML310e Gen8 v2

  Hello

  just unboxed a new server HP ProLiant ML310e v2 Gen8 (8 GB of ram). I can reach the Web interface of the ILO, but the server hangs on initialization of the system windows 2012 beginning 90%. I try with RAID1 and RAID 0, I tested the raid with the HP tools and no errors, there is sometimes the beginning of fine windows server, I check the view and no error found. I reinstalled the Server 4 times in different ways with the same problem, I used the latest drivers for the raid. Any idea? (HP phone support is always busy)

  I worked with the support of HP, we found that the issue was an update from MS, we have applied the fix and resolve the problem

  more information:

  http://www.TSF.NET.au/kb2967012-a-Windows-8-1-based-or-Windows-Server-2012-R2-based-computer-does-not-restart-after-update-rollup-2919355-is-installed/

• How can I switch to windows on my Proliant Microserver Gen8 10

  Hello

  I try to get Win 7 pro to win 10 on my Proliant Gen8 microserver

  The error message I get when trying to do, it's that the onboard video of Matrox does not support win 10?

  Is it just a case of editing a video card to go beyond the issue low profile PCIE or is there to do?

  Any help would be appreciated

  Install a compatible W10 card and set it as the default video device in bios, W10 should install now.

• HP ProLiant ML310e Gen8 v2: impossible to activate the new graphics card

  I need to install a new graphics card on a HP ProLiant ML310 Gen3 of v2 server as edge one is a failure.

  Card - EVGA GeForce 8400 GS

  During the installation startup BIOS hangs after the initial check (100% / no errors) and remains at a black screen indefinitely instead of forward to the ProLiant logo boot before windows.

  Therefore, I am unable to enter the bios to enable the PCI 16 slot.

  Before the system LED flashes red at this point.

  Any help will be appreciated.

  Hello:

  You can also ask your question on the Business - section ML servers HP Support Forum.

  http://h30499.www3.HP.com/T5/ProLiant-servers-ml-DL-SL/BD-p/ITRC-264#.VV9KLDjbLGg

• The HP ProLiant DL320e Gen8 Setup error

  Hello

  I'm trying to install esx 6 on the dl320e machine. The software is custom iso HP (VMware-ESXi-6.0.0-2494585-HP-600.9.3.20-Jun2015.iso). The target disks are 2 ssd's in RAID1, the controller is B120i. The installation program starts normally and I can choose the table. After a few minutes the installer quit with "error: can't have partition outside the disk.

  Do you have anyone encountered similar problem?

  When you start the HP Media Server if you press ALT + F1 as you an user root and the password empty. Here, you can use the partedUtil to delete a partition on the logical drive or simply send the command to the disk (substituting the name of your drive) as described below previously mention it VMware KB:

  partedUtil setptbl /vmfs/devices/disks/naa.5000c50023397a33 msdos

  And try again to see if it solves the problem.

• HP ProLiant DL380e Gen8 instaled ESXi 5.5.0 Build 2068190 on the problems of GROUP internal 8GB SD card

  I have the new server, new instalation.

  Inside I have 2 EG0600FCSPL drive in RAID 1

  There are currently running VM 3. 2 R2 server 2012 and a VM of Windows 8.1.

  First of all, I got there are GROUP 14 days and it poped up during the instalation. I've updated firmwere diretly from the server.

  Now that the server is rdy to start runing (field's UP, computer in the area etc.) I got the GROUP yesterday again. After reading some forums, may be problem with HP in terms of energy savings. I set everything on high preformance. Night GROUP again, ares yesterda GROUP setting and this night.  All spoke of "no heartbeat".

  I also notice when I connect to the server in the morning, it takes like 30 sec to get connect. After the first connection takes like 5 seconds, much faster. What I'm noticing from the beginning until today. Which is perhaps related to something.

  No idea what can be wrong?

  TNX

  Mathjaz.

  About power management.

  Ive had never no success with activated power management.

  Power management means GROUP...

  In the bios, you must set to high performance power management, disable all States 'C' and the maximum cooling.

  We have suffered before CMTF due to power management and now ALWAYS disable it.

• HP ProLiant DL385p Gen8 + Esxi 5.5 through IO path-

  

  Here's my problem: he has to O/O the hollow way USB controller.

  The server's firmware is newer available, ESXI build is also newer available at HP - 5.5U2 - HP - 5.76.36 - Sep2014.

  If I connect any device usb (cd-rom or keyboard) it works fine.

  What can I do to fix this?

  You don't need to use the PCI passthrough to use USB devices, see this:

  USB configuration from an ESXi on a Virtual Machine host

• 2012 R2 server hangs randomly - Dump shows "probably caused by: ntkrnlmp.exe.

  Try to find what has caused the problem. Please check below for debugging details:

  HP (ProLiant DL380p Gen8) with Windows Server 2012 R2

  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Error checking 133, {1, 1e00, 0, 0}

  Probably caused by: ntkrnlmp.exe (nt! FNODOBFM: 'chain' + adbe)

  Follow-up: MachineOwner
  ---------

  14: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  DPC_WATCHDOG_VIOLATION (133)
  The CPD watchdog detected an extended operation to an IRQL of DISPATCH_LEVEL level
  or higher.
  Arguments:
  Arg1: 0000000000000001, the system has cumulatively spent a long period of time to
  DISPATCH_LEVEL or above. The offending component may generally be
  identified with a stack trace.
  Arg2: 0000000000001e00, the monitoring period.
  Arg3: 0000000000000000
  Arg4: 0000000000000000

  Debugging information:
  ------------------

  SYSTEM_SKU: 665552-B21

  BIOS_DATE: 02/08/2014

  BUGCHECK_P1: 1

  BUGCHECK_P2: 1e00

  BUGCHECK_P3: 0

  BUGCHECK_P4: 0

  DPC_TIMEOUT_TYPE: DPC_QUEUE_EXECUTION_TIMEOUT_EXCEEDED

  CPU_COUNT: 10

  CPU_MHZ: a21

  CPU_VENDOR: GenuineIntel

  CPU_FAMILY: 6

  CPU_MODEL: 3rd

  CPU_STEPPING: 4

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT_SERVER

  BUGCHECK_STR: 0 X 133

  Nom_processus: EndpointServic

  CURRENT_IRQL: d

  ANALYSIS_VERSION: 10.0.10240.9 amd64fre

  LAST_CONTROL_TRANSFER: from fffff8019a1e0f7e to fffff8019a1c5ca0

  STACK_TEXT:
  ffffd001 '9dd31c88 fffff801' 9a1e0f7e: 00000000'00000133 00000000'00000001 00000000' 00001e00 00000000' 00000000: nt! KeBugCheckEx
  ffffd001 '9dd31c90 fffff801' 9a0b1871: ffffd001 '9efc0c80 00000000' 15bf41c1 ffffe001' d6c621a0 00000001' 00000000: nt! : FNODOBFM: 'string' + 0xadbe
  ffffd001 '9dd31d20 fffff801' 9a00d7b5: 00000000 00000001' fffff801 '9a3d0000 00000000 00000001' ffffe001' ec99e580: nt! KeClockInterruptNotify + 0 x 91
  ffffd001 '9dd31f40 fffff801' 9a14c143: ffff9ee3'c1e337dd fffff801 '9a 174057 00000000 00000001' ffffe001' ec99e580: hal! HalpTimerClockIpiRoutine + 0x15
  ffffd001 '9dd31f70 fffff801' 9a1c712a: ffffe001'd6a03e00 fffff801 '9a3d0000 ffffe001' e41be080 00000000 00000001': nt! KiCallInterruptServiceRoutine + 0xa3
  ffffd001 '9dd31fb0 fffff801' 9a1c750f: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiInterruptSubDispatchNoLockNoEtw + 0xea
  ffffd001 'a25946b0 00000000' 00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiInterruptDispatchLBControl + 0x11f

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  NT! : FNODOBFM: 'chain' + adbe
  fffff801'9a1e0f7e cc int 3

  SYMBOL_STACK_INDEX: 1

  SYMBOL_NAME: nt! : FNODOBFM: 'chain' + adbe

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: nt

  Nom_image: ntkrnlmp.exe

  DEBUG_FLR_IMAGE_TIMESTAMP: 550f41a6

  IMAGE_VERSION: 6.3.9600.17736

  BUCKET_ID_FUNC_OFFSET: adbe

  FAILURE_BUCKET_ID: 0x133_ISR_nt! _ ?? _::FNODOBFM:_string_

  BUCKET_ID: 0x133_ISR_nt! _ ?? _::FNODOBFM:_string_

  PRIMARY_PROBLEM_CLASS: 0x133_ISR_nt! _ ?? _::FNODOBFM:_string_

  ANALYSIS_SOURCE: KM

  FAILURE_ID_HASH_STRING: km:0x133_isr_nt! _ ?? _::fnodobfm:_string_

  FAILURE_ID_HASH: {89366ad1-5557-ac2b-d015-8f6ec2fdbf31}

  Follow-up: MachineOwner
  ---------

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  We need the log files themselves (called a DMP files) because they contain the only record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.
  Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here
  If you have any questions regarding the procedure, please ask

• HP StorageWorks 82 or 82Q

  Hello

  I am new to VMware ESXi, San and fiber.

  The here is what I propose to buy but I'm not sure on the best fiber HBA for ESXi 5 servers with respect to the support and drivers, etc...

  The two I've been watching HP StorageWorks 82 Q QLogic and Brocade HP StorageWorks 82 b is there much difference?

  Thank you

  5 x servers
  HP ProLiant DL380p Gen8 High Performance (662257-421)

  5 x fiber HBA
  HP StorageWorks PCI - e Fibre Channel Host Bus Adapter 82Q double Port (AJ764A)

  2 x Fiber Switch
  HP StorageWorks 8/20 q Fibre Channel Switch (AQ233A)

  1 x SAN
  HP StorageWorks Modular Smart Array P2000 G3 FC Dual Controller SFF Array (AP846A)

  12 x cables to fibre
  HP first Flex OM4 (QK732A)

  We found the cards Brocade 82 b has no support direct attach (mode loop to be precise). This shouldn't be a problem given your switch, but after finding out the hard way, all of our deployments were with the 82 q and we found them works fine in every ESXi environment we have.

  These two cards are however in the HCL and should be good.

• Second FT VM cannot be created problem

  Hello everyone

  I am running two ESXI 6.0 U1 on both

  current configuration:

  ESXI 1:

  HP ProLiant DL380p Gen8

  Intel Xeon CPU E5-2609 0 @ 2.40 GHz

  RAM: 48 GB

  Storage: 2 TB

  ESXI 2:

  HP ProLiant DL380p Gen8

  Intel Xeon CPU E5-2609 0 @ 2.40 GHz

  RAM: 48 GB

  Storage: 2 TB

  
  

  I created a cluster, active HA and I have a 16 GB of ram virtual machine

  created fixed disks fully provisioned for C: E: 500 GB f GB 135: 600 GB

  If the virtual computer runs on ESXI 2 and currently uses 1.21 to

  so my problem is during activation of the FT on this virtual computer it stops with a message of: No. Compatible host for the VM side of fault tolerance

  
  

  and when I stopped the virtual machine and activate the FT it works but when I start the VM, it cannot start also

  
  

  can someone help me to view or to debug on why newspapers Faul tolerance cannot be enabled

  
  

  and thank you

  Hello again

  After several days of test, that my friend came up with a good idea that is to test each separate vmdk on the different data store with enough free space to ensure that it will allow the creation of minimum double the size of the original primary vm, vmdk after several hours to activate the FT, it worked.

  the solution is to choose a data store that has a space at least the size of the vmdk.

  I think FT on Version 6.0 requires double space to create the secondary vmdk and after that the creation is completed and activated FT, it will remain in the original format.

  to be confirmed...

  
  

  Thanks to this article to work around this problem, or for the solution.

  
  

  Secondary VM cannot start if more than 4 x 2 TB VMDK are connected

• Only one virtual host can reach the door at the same time?

  I installed ESXi 6 on a HP ProLiant DL380p Gen8 and got an operational virtual host. But it seems that no matter what I do, one host can reach the door at one point. All other grandis hosts can ping other virtual hosts and ESXi hardware, but can not get any further than that. And the same is true of outside: I can reach ESXi and a host of outside this subnet, but others are inaccessible.

  I checked that each host is configured correctly and in the same way, and they have different MAC addresses and is even went up to clone a virtual machine that has access to the network, without success.

  The upstream network hardware is not under my control, but they swear everything that should be the cause of this behavior. The ProLiant server has a Broadcom NetXtreme BCM5719, 1Gbps full-duplex. The guests are CentOS 7 x 64, with adapters vmxnet3 (but Intel E1000 adapters exhibit the same behavior). All hosts are on the same port group.

  Any ideas?

  Welcome to the community,

  It sounds as if the physical switch port is secure port, which generally limits the number of MAC addresses that are allowed to 2. Depending on the switch model, this may be named "desktop" mode. Change mode of the configuration of the port to access (or trunk) should solve the problem.

  André

• VSphere/ESXi can run on different processor architecture?

  We want to implement VMware infrastructure and research in the vSphere purchase Ess. 'More'. We are not implement shared storage. We will have 3 ESXi host total.

  I want to save money as much as possible. I have a HP Proliant DL380p Gen8 and a DL385 G7 servers. By HP, both are compatible with ESXi 6.0. I would use these two servers and have to buy a server.

  The DL380p is the DL385 AMD and Intel. If this configuration can work or this server must be Intel?

  Thank you

  Alex

  We absolutely want to use vMotion. Can be used without storage shared, correct?

  Yes, it is possible since the 5.1, but there are a few things to keep in mind. It's basically a combination of storage vMotion, transferring the VM disks from one storage to another and a regular vMotion device, transfer a live VM running from the memory of one host to another.

  As such it is nowhere as dynamic as a normal vMotion alone, since the copy of VM disk data can take some time. There is also no support DRS.

  You can read about some more here: http://wahlnetwork.com/2012/11/21/leveraging-vmwares-enhanced-shared-nothing-vmotion/

  Must the CPU be the same model? For example, should all have Intel Xeon E5 2609 v2 CPU?

  No, the basic requirement for transfer a live OS running, it's that both source and destination host supports the same CPU instruction sets. Exact model, clock speed Mhz cache, dimensions, etc. are not relevant as long as the CPU instruction sets are identical. So no, they do not have to be the exact same model.

  In addition, you can enable Enhanced vMotion compatibility (EVC) on a cluster of servers with the same CPU provider, which allows you to establish the lowest common denominator of a generation of CPU between different hosts. For example, the Xeon E5 2609 v2 you mentioned is a generation Ivy Bridge CPU. If you add a generation Sandy Bridge Xeon you define the EVC to Sandy Bridge mode, as it is the older generation in your cluster and containing all common instructions sets that are also found in the home of Ivy Bridge of latest generation. If you add a

  host with Haswell generation CPU, you would set the EVC at Ivy Bridge mode respectively.

  VCA will hide the new instructions to virtual machines to ensure that they can be migrated directly to all guests.

  You have to keep AMD out of your cluster host, but that's not really make a difference in your case since vMotion work never between AMD and Intel, and that you can not use VMware HA because you are devoid of shared storage. Just be aware that VM on the host AMD will never be able to migrate to other hosts without interruption of service through enhanced vMotion.

  See these articles for more details on the VCA:

  VMware KB: Enhanced vMotion compatibility (EVC) support processor

  VMware KB: EVC and CPU compatibility FAQ