ProLiant ML10
So I had this Proliant ML10 of my friend and I had no use of a server. So I installed windows 7 ultimate and it runs pretty bad. My cousin came and wanted to play roblox and he says that the graphics card has failed. I can not find anywhere base system device driver and any upgrades for the readers. Can someone help me?
Hello:
You can also ask your question on the Support Forum of the community of HPE - ML servers section.
https://community.HPE.com/T5/ProLiant-servers-ml-DL-SL/BD-p/ITRC-264#.WADaUOTru9I
You can use the Windows Server 2008 R2 drivers on the support page and we hope they work on W7.
I think the Base system device has the HP ProLiant 3/4 ILO Management Controller Driver Package for Windows Server 2008/2012 X 64 or the pilot Channel Interface Driver for Windows X 64 HP ProLiant iLO 3/4.
I'm sure it's one of these 2.
Tags: Notebooks
Similar Questions
-
ProLiant ML10 v2: SUSE SLES 12 initialization failed on the Proliant ML10 v2
Hello
I'm trying to install SLES 12 on the server above. It seems that the installation is successful. But when reboot the server, I can not go in the SUSA, but get the following message is displayed:
Boot from the local disk...
Initialization failed: press a button to try again.
Any idea?
Thank you
Nicho2016
Hello:
You can also ask your question on the Forum of Support Community Business Enterprise HP - ML servers section.
http://community.HPE.com/T5/ProLiant-servers-ml-DL-SL/BD-p/ITRC-264#.Vp0HtuT2bGg
-
HP ProLiant ML10 E3 - 1220v2 1 P 4 GB - U B110i SATA 1 TB 300W input PS Svr/Promo NHP
We recently purchased the server above for our office of a Kolkata - Lalani Infotech - HP authorized reseller
Our total surprise, the drivers and software are not come in a CD, as it has been mentioned for the same download HP Web sites...
And we were able to find the appropriate drivers on the HP website for the configuration and installation of the HP ProLiant server models, as the sites say that this product is not sold in India. So how did the dealers selling this product in India?
Surprisingly, the HP site is not yet able to find this product online... and even the dealer do not respond to emails.
Rajesh K Kishanpuriya
Ideazfirst Marketing Services Pvt Ltd
It's the HP consumer support forum. Your Proliant server is a product of the HP Enterprise Business.
It is recommended that you join tit HP Enterprise Business forumand post your questions there.
-
Need Driver video for Proliant ml110 G6
I need hardware drivers - video - chipset, etc and I watched and google anywhere. Not on the Easy Setup CD or the Drivers from HP website. Help?
System: HP Proliant ml110 G6
OS: Windows Server 2008 R2 (x 64)
Hello:
Here is the link to the Matrox driver page.
They do not seem to support the MGA G200 card for 64 bit anything.
http://www.Matrox.com/graphics/en/support/drivers/latest/
I suggest that you post your question in the Forum of HP Business - section ML servers Support.
http://h30499.www3.HP.com/T5/ProLiant-servers-ml-DL-SL/BD-p/ITRC-264
Me? I woujld just buy a new card capable video of windows 7 and be done with it.
Best regards
Paul
-
ProLiant ml110 g5: Server Proliant Ml110 G5
System does not boot after the power failure. Turn on and turn off fans.
Hello:
You can also ask your question on the Forum of Support Community Business Enterprise HP - ML servers section.
http://h30499.www3.HP.com/T5/ProLiant-servers-ml-D L-SL/bd-p/itrc-264 #. VemggWaFO9I
-
How can I switch to windows on my Proliant Microserver Gen8 10
Hello
I try to get Win 7 pro to win 10 on my Proliant Gen8 microserver
The error message I get when trying to do, it's that the onboard video of Matrox does not support win 10?
Is it just a case of editing a video card to go beyond the issue low profile PCIE or is there to do?
Any help would be appreciated
Install a compatible W10 card and set it as the default video device in bios, W10 should install now.
-
ProLiant DL320e with Windows Server 2012 Bluescreen
Hello
I installed Windows Server R2 with smart supply a Proliant DL320e Server 2012 R2 and it bluescreens much. The blue screen message is a pretty no description "KERNEL_SECURITY_CHECK_FAILURE".
I installed a second Proliant DL320e server and it shows the same behavior, so I conclude that this isn't a defective hardware.
I found some knowledge which mentions screens blue and with the driver for Smart Array
http://h20628.www2.HP.com/km-ext/content-webapp/document?docid=emr_na-c03793656 & DTD = default & local = d...
But the update and version numbers do not match.Drivers, software and firmware for the HP DL320e Gen8 ProLinat Server Page did not all downloads for my OS-, but it displays a warning that it is experiencing problems.
I tried to fill in the HP Support Assistant, but I got an email in response, telling me that they are currently unable to help with e-Mail support.
The servers are offline on a clients site in a restricted environment so that they lack updates online.
During this time, I downloaded the SPP Service Pack for Windows Server
FTP://FTP.HP.com/pub/softlib2/software1/CD-generic/p652182553/v84427/SPPMDSLWIN2013090.2013_0830.7.i... and today, I'll try if it corrects the blue screens.
Does anyone have pointers?Take care
Martin
Thank you, I have not found this forum. If an admin could move it which would be best.
Just in case anyone else has this problem is this question:
I contacted HP by telephone support and the solution is:
Do not use smart supply when you configure your server, it is not supported and it will be randomly bluescreen with Windows Server R2 2012. You must install windows directly, so take your storage driver and copy it to a usb key and load the driver during the installation of windows. In my case I needed to use the mass storage drivers for Windows Server 2008 R2 from http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5293151 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253DMTX_9b5424c852a54e49b501e280e5%257CswEnvOID%253D4064%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken
Take care
Martin
-
HP proliant ml310e gen8: can't the Nic Server 2012 team
Hello everyone hope everyone is great
I have a hp proliant gen8 ml310e I have a problem, do the 2 Nic set interfaces
I tried 3drivers the
1 Microsoft driver by default with windows server 2012
2 broadcom driver the latest driver directly from the Broadcom website
3 hp driver from the drivers from the Hp site for this model
When I go and try to create a Nic team a mistake occurres and Nic fails creative team I also tried doing it through power shell operation has expired: TeamNic installation has not completed on time.
I tried a clean format
System specs
HP proliant ml310e gen8
Broadcom NetXtreme Gigabit
Server Windows 2012
Hello:
You can also ask your question on the Forum of Support Community Business Enterprise HP - ML servers section.
http://community.HPE.com/T5/ProLiant-servers-ml-DL-SL/BD-p/ITRC-264#.Vp1hReT2bGg
-
ProLiant DL360 G8: Missing Base system device driver
Hello
I have a HP Proliant DL360 G8 with Windows Server 2008 R2 Enterprise SP1 server, but when I go to Device Manager I get lack of base system device driver. Please I need know what driver to install.
Properties of the device:
Hardware LDS:
PCI\VEN_8086 & DEV_0E26 & SUBSYS_18A8103C & REV_04
PCI\VEN_8086 & DEV_0E26 & SUBSYS_18A8103C
PCI\VEN_8086 & DEV_0E26 & CC_088000
PCI\VEN_8086 & DEV_0E26 & CC_0880
Location information:
PCI bus 0, device 4, function 4
Compatible IDs:
PCI\VEN_8086 & DEV_0E24 & REV_04
PCI VEN_8086 & DEV_0E24
PCI VEN_8086 & CC_088000
PCI VEN_8086 & CC_0880
PCI\VEN_8086
PCI\CC_088000
PCI\CC_0880
Best regards
Hi Rubendiazmarino,
Try these drivers for your server:
- HP ProLiant iLO 3/4 Management Controller Driver Package for Windows Server 2008/2012 X 64 (U.S., International)
- HP ProLiant iLO 3/4 Channel Interface Driver for Windows X 64 (U.S., International)
- Handset identifier Chipset for Windows Server 2008 R2 (American International)
After installation reboot, your server for these driver to work.
Yours faithfully,
Ryan
-
HP ProLiant ML310e Gen8 v2: impossible to activate the new graphics card
I need to install a new graphics card on a HP ProLiant ML310 Gen3 of v2 server as edge one is a failure.
Card - EVGA GeForce 8400 GS
During the installation startup BIOS hangs after the initial check (100% / no errors) and remains at a black screen indefinitely instead of forward to the ProLiant logo boot before windows.
Therefore, I am unable to enter the bios to enable the PCI 16 slot.
Before the system LED flashes red at this point.
Any help will be appreciated.
Hello:
You can also ask your question on the Business - section ML servers HP Support Forum.
http://h30499.www3.HP.com/T5/ProLiant-servers-ml-DL-SL/BD-p/ITRC-264#.VV9KLDjbLGg
-
HP ProLiant G6 Server SE316M1: Overclocking CPU on HP ProLiant G6 Server SE316M1
Hello
I have in mind to buy a HP ProLiant G6 Server SE316M1. The prices are really cheap on some merchants.
I saw on a cue that it was possible to overlock Xeon E5645 2.40 Ghz.
Of course I need stability, but I hope to accelerate both CPU up to 2.80 Ghz.
I don't think it's possible, but I prefer to ask the community.
Thank you very much.
Hello:
Here is the manual in the BIOS Setup for the prospective server that you want to buy.
http://h20628.www2.HP.com/km-ext/kmcsdirect/emr_na-c00191707-19.PDF
I typed the word "overclock" in the search window, and nothing came.
Here is the main support for the server page...
http://h20565.www2.HPE.com/portal/site/hpsc/public/PSI/home/?sp4ts.Oid=3884343
While I have not read the manual in its entirety, nor I know much about HP servers, I usually have a good amount of knowledge about laptops and HP business desktops and I can tell you that none of them offer overclocking processor, graphics and memory options.
I have to assume that since HP must provide assistance guaranteed at least one year on most of these products (mine all had them 3 years warranty), it would not be in their interest to provide for overclocking options in their PC, because we, end-users could fry components due to overclocking and then to file claims under the warranty.
-
I just bought a HP Proliant ML310e Gen v2. I tried to install two SAS drives, but the computer does not recognize the readers at all. I just tried disk SATA set up and it 'clear'. However the two SAS drives are still not recognized. Leafing troubleshhoting Guide, I found a reference to the HP controller dynamic Smart Array B120i RAID, which is integrated to this server, which indicates that you should deacheter an inorder of additional license for Smart Array RAID B120i controller work with SAS disks...? What's a sense? Does anyone know where to buy, and how you load this "license"? I didn't need the SAS as a RAID drives, but I need there speed R/W, so I'm very frustrated that this box can not see... I intend to use REDHAT as the operating system. Thank you
I have already provided the only suggestion I can offer you.
I doubt anyone on the consumer support forum can answer your question. I certainly can't.
-
HP Proliant Server installation issues
Hello!
I am trying to install Windows server 2008 R2 on HP Proliant Gen8 320e server but the configuration says it couldn't find my HARD drive so that, POST he passed as OK and him are still lit throughout the process.
What could be the problem and fix it, please?
Thank you!
Hello:
You can also ask your question on the Business - Proliant servers HP Support Forum.
http://h30499.www3.HP.com/T5/ProLiant-servers-ml-DL-SL/BD-p/ITRC-264#.UtP_hel3u9I
-
ProLiant ML350 G6: How to add a new disk to my server
I have a HP ProLiant ML350 G6 in the HDD rack before I have some unused slots and I want to fill them with some news readers. How do I do that? I do not have a "cage" where to put a standard 3.5 "drive, so I wonder if I need to buy the whole cage + reader package.
In addition, can I organize the disks in any way I want, more than one RAID volume with a simple bracket and a single raid card? I guess Yes, but I want to make sure, and ask is free
Thank you
Hello
This is the HP consumer forum, and we do not treat the servers and Linux.
HP has an official presence on this forum other than for administration and moderation. The help you receive is mainly by volunteers.
You can get assistance on the HP Enterprise Business Forum since you have a class business PC.
However, these Manuals can be useful.
-
ProLiant ml350 g6 is compatible with Nvidia tesla K40?
Hello, I got a HP Proliant ML350 G6. Can someone tell me that my computer is compatible with Nvidia tesla K40? Thanks in advance
Hello:
You can also ask your question on the Forum of Support Community Business Enterprise HP - section ML servers...
http://h30499.www3.HP.com/T5/ProLiant-servers-ml-DL-SL/BD-p/ITRC-264#.VbD0ypXbK9I
Maybe you are looking for
-
Toshiba virtual Store account Reset - 31531
Please reset Toshiba e-store account - 31531
-
What is the amount of time are the numbers under a time in the task manager position?
In the Manager of tasks at the time, it shows how long a computer has served. 1:23:45:67 is an example of these numbers. In this example, 6 and 7 means seconds, rest for 4 to 5 minutes and position 2 to 3 hours. What does the 1 stand?
-
What is the end of support date Windows XP SP3
What is the end of support date Windows XP SP3
-
HP pavilion dv4-2165dx entertainment notebook pc memory
So I have a hp pavilion dv4-2165dx entertainment notebook pc, and he had performance problems lately, which im pretty sure are problem with him having no not enough memory. Yes, I'm going to clarify a bit before you go.I ran clean on my laptop, turne
-
LaserJet CP1025nw on MACBOOK and no wifi
My macbook automatically installs the printer drivers. (the CD with installation software does work with my latest IOS), so now I can print with the USB cable. BUT no WIFI connection, I couldn't get the wifi connection works between the printer and t