Prompts to save the sequential model; Unwanted.

When you save one of my TestStand applications, I am invited to Save the SequentialModel.seq.  I have never recorded changes in the model of the sequence and do not want.

What I must do to this application so that it uses the intact sequence not quick save the changes to the sequential model AND model?

(1st post on a forum)

Hello

Since you have never saved the sequential model my guess is that the test sequence you meet could create this problem.

Try this:

Open TestStand and open a new sequence (do not open your test sequence). Save.Do, you always get invited him to record the sequential model?

If any problem then perhaps with the test sequence.

If Yes, then simply fix TestStand.

Normally this occurs so that the version of types (common to your test sequence and types of OR) is incremented in your test sequence.

When you load your test in TestStand sequence it automatically detects that the types present in the sequential model is a lower version and prompts to save it. Its a feature, not a problem.

You can use this tool to resolve the differences of type:

https://decibel.NI.com/content/docs/doc-39163

Convert your test sequence to be compatible with the sequential model and this should solve the problem.

I hope this helps.

Ravi

Tags: NI Software

Similar Questions

  • The Globals and Globals station brought in the sequential model of the file

    Hello

    I create sample files to illustrate the use of the station globals and globals using TestStand 4.2, model batch file.  I was assuming that station overall value would be persistent to the station and file global values are persisted to the file (as long as the file is not deleted, the value will remain).  But, after the executions of couple, I found that I'm wrong.

    He's looking to me that globals file, the value reset for each new execution.  I would like to ask if this is a correct behavior?  If it is correct, I can say that: because each run contains the new instance of the file, so at the beginning again, new copy of the globals file are created.  (I'm borrowing the idea of the model of batch execution logic, but for my example, I use only the sequential model).

    In addition to reading the other posts, for globals station, value is not persistent until a file Save command issued manually.  How to deliver this command?  And, is there a similar command for globals file?

    Thank you.

    Peggy

    Hello

    When teststand is closed the StationGlobals file is updated automatically, you don't have to do anything.

    For FileGlobals, there is a static version, that you create at the time of editing, and there is a version of the runtime. When you change the values during execution, these are not kept when execution is completed. So if you want to maintain values of execution you will also change the static values and also save the file in the sequence.

    There are examples in this forum to do just that.

    Hope this helps

    Concerning

    Ray Farmer

  • Save the server model

    I made a model that returns to a banner and a flash video on the server. When I save the template on my hard drive, nor the banner or video appears on the model.  When I try to save the template on the server, I get the warning screen,"Dreamweaver stores the templates in the root of a site directory and there is no defined site."  I then go to manage sites, and then click Directory he on the server where the files html and nothing happens.  Pls advise

    1. you need to work within a local site defined in Dreamweaver use the DW models

    2. a model DW has no function on the server.  It only works in DW and only to change your local files, which must then be uploaded to the server.

    It's how you work?  Sound doesn't like it...

  • Prompt to save the .cfm file when you browse it

    I recently installed ColdFusion 8 and after many adventures, I am the administrator to come. However, when I navigate to a page .cfm elsewhere, I am invited by the browser to save the file. I deleted and added the connection JRun using the Web Server Configuration tool and .cfc and .cfm and .cfml are in Application from IIS mappings (C:\ColdFusion8\runtime\lib\wsconfig\2\jrun.dll). Can someone tell me what I should do next to fix the problem?

    Thanks in advance.
    Erik

    The challenge was to remove and then re-add the application mapping for .cfm, .cfc, .cfml in IIS, .cfswf

  • How to save the backup model chart

    Hi I just lost all the nuances of my model as an Illustrator has been altered and adobe reset my preferences. How can I save them so that I don't lose all the new a similar problem arises?

    If you have a file where they were used, you can load the file into a swatch library

  • You are prompted to save the file when opening it

    Here is a new... I am trying to open a file and adobe asks me to save changes... when it is not still open!

    File does not open, and it is now corrupted.

    After searching solution... found this in the forum and now it allows me to open the file without saving it quickly... and I can see all the slides.

    Finally, I found that my user settings file was corrupted. I was able to overcome by following these steps.

    NOTE: You will lose your preferences - so make a note of them before to do. In addition, you will need to make sure you can see hidden files.

    1. close all instances of Captivate.
    2. check in the Task Manager to make sure that no Captivate.exe process is still running.
    3. navigate to C:\Documents and Settings\YourUserName\Application Data\Macromedia\Captivate
    4. rename the captivate_v10.dat in captivate_v10.dat.old
    5 restart Captivate (this will create a new dat file)

  • Firefox won't save passwords, will not be asked to save them. I have used this for 2 years +. I know where are the settings. New comp, Windows 7, Ffx 4. You are prompted to save the password 5 times and stopped so I ask everyone here if they have any sugg

    Why must you do this such a pain. 40 minutes, I tried to post this question.

    • Make sure that you do not run Firefox in private - browsing using Firefox without saving the story mode (permanent).
    • You enter private browsing mode, if you select: Tools > Options > privacy > History: Firefox will be: "don't forget the story ever.
    • To view the history settings and cookies, choose: Tools > Options > privacy, choose the setting Firefox will: use the custom settings for the story of
    • Uncheck the box: [] "automatically start Firefox in a private browsing session.
  • With the help of the sequential model as well as the Simple OI


    Oops, sorry for the inconvenience, I just solved. I was using relative paths and has not implemented the search directories.

    Vladimir

  • Password changed on a Safari but Yahoo Mail account, I cannot save the new password and username.

    Yesterday, I changed my password to a Yahoo Mail account but Safari on iMac OSX 10.7.5, (6.1.6) won't let me save the new password.  Now, I have to type my username and then auto Safari fills the old password.  I can access my emails by typing the correct password, but I can't find a way to update Safari to remember the new password or user name.  I had a look on some forums and followed the advice given there, but none of them have worked:-check that the username box and password is checked; Delete the entry in the preferences of Safari; Check the drive in disk utility and click on repair disk permissions. Click on "Repair" in S.o.s. keychain and add the password etc in the keychain.  Remove all data from the Web site and clear the history.  Switch off and unplug before returning.  Can anyone help, please.

    Hello...

    You must remove the old keychain.

    Open Keychain Access located in Applications > utilities

    Then select passwords on the left.

    Type the name of your e-mail account Yahoo in search field top right of Keychain Access window.

    Then right or control click the keychain, and then click Remove.

    Now on Safari, go to Yahoo, sign in with your user name and password. You should be prompted to save the data in a new keychain. The next time you visit this site, Safari should automatically fill your login for you.

  • Equivalent of PreUUTLoop for the parallel model

    I am building a test sequence to test two DUT in parallel, on a station where some of the facilities will be shared.  I want to initialize all the equipment BEFORE the start of the exectuion of tests and even more specifically before the individual PreUUT of each execution taken step.

    It was logical to my approach "Initialize hardware" in the "PreUUTLoop" sequence reminder in an original design that used the sequential model. It must only be done once.

    Is there a reminder of similar sequence in the parallel model in which I can move step 'initialize hardware "?

    I put in the SequenceFileLoad callback.

  • WIN 7 32 BIT: the cutting tool is not save the tinsmith shear

    Snipping Tool Save the feature does not work I tried save as

    I also used shortcut keys

    the output of the tool without saving the changes, I'm prompted to save the snip and when I select record it does nothing

    I scanned my system for viruses, spyware and malware

    There is no problem

    Hi anshulag62,

    1. what exactly happens when you click Save to store the key?
    2 - is save it as dialogue remain open or close?

    If save as dialog box closes after clicking on save button, check the target location to see if there is a new file.

    Try the sfc (System File Checker) scan to see if any system file is missing or damaged. To do this, try the following steps:
    a. visit http://support.microsoft.com/kb/929833
    b. run the scan successfully.
    c. restart the computer so that the changes take effect and check the result.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Dreamweaver CC - no view 'Design', prompt always "Save".

    Hi all

    I found several people, which implies a question "Dreamweaver CC 2015 always ask me to save. It's the 'Save' prompt that occurs whenever a code change is made then clicking away from Dreamweaver, or the "live" view is clicked. "."

    Clearly, the solution for this is to switch to Design view (rather than "under tension" view), but it doesn't seem to be a view of 'Design' 2015.2 CC (on Mac El Capitan).

    Is there a way to get around this? I am pleased to be invited to register by clicking on the 'Live' display window, but not when you click away from Dreamweaver. I think it is unnecessary.

    Oddly enough, when you change the code in my HTML page, clicking on a file linked at the top of Dreamweaver (for example my css page) and THEN clicking on the "live" I'm not prompted to save the HTML page, or code files that have been changed.

    Thank you for all the responses in anticipation.

    The 'save' command prompt occur only when you use such as PHP and when server-side code in Live view mode.

    The only time where the Design mode is not available is when you use checkerboard to fluid. GFL is no longer supported, and I advise you to find another framework like Bootstrap.

    If you want to persist with the FGL then take a look on Re: is it possible to display the design view in the fluid grid pages?

  • Save the contents of the form elements in a txt file


    Hello

    I am trying to save the contents of the form to a text file by clicking on a button. For example, in my form, I have 4 text boxes

    1. client code

    2 Subscriber

    3. customer name

    4. customer name

    There is a backup button in the page. Once I click on save button, I get a download prompt to save the file (txt file). The txt file must contain the values of the fields in each line. Can we achieve using Apex?

    Thank you

    TJ

    Hi TJ.

    Yes, its possible. For this you must use a bit of PL/SQL Code.

    In the page, you create a branch;

    Branch point = to present: after the treatment (after calculation, Validation and treatment);

    Type branch = branch of PL/SQL procedure

    And the branch code, you have to have something like this:

    declare

    CLOB v_clob;

    v_blob blob.

    dest_offset NUMBER: = 1;

    offset NUMBER: = 1;

    amount INTEGER: = dbms_lob.lobmaxsize;

    blob_csid NUMBER: = dbms_lob.default_csid;

    lang_ctx INTEGER: = dbms_lob.default_lang_ctx;

    caveat INTEGER;

    V_LENGTH NUMBER;

    Start

    DBMS_LOB.CREATETEMPORARY (v_clob, true);

    DBMS_LOB.CREATETEMPORARY (v_blob, true);

    v_clob: = ' ID: ' | : PXX_ID | »

    Geographical area: ' | : PXX_LOCATION | »

    First name: ' | : PXX_LAST_NAME | »

    First name: ' | : PXX_FIRST_NAME;

    DBMS_LOB. () CONVERTTOBLOB

    v_blob,

    v_clob,

    amount,

    dest_offset,

    offset,

    blob_csid,

    lang_ctx,

    (caveat);

    V_LENGTH: = dbms_lob. GETLENGTH (v_blob);

    --

    -set up the HTTP header

    --

    owa_util.mime_header ("application/octet ', FALSE");

    -set the size so that the browser knows how to download

    HTP.p ("Content-length: ' |") v_length);

    -the name of the file will be used by the browser if users only one save as

    HTP.p ('Content-Disposition: attachment; filename = "download.txt" ');

    -close the headers

    owa_util.http_header_close;

    -Download the BLOB

    wpg_docload.download_file (v_blob);

    end;

    See you soon

    Carlos Pereira

  • Is it possible to get the linked server settings in the RTF models

    Hi all

    I have a Common.rtf have the code as
    <?template:Header?>
     (My Image)
    <?end Header?>
    I saved over file at a certain place in my system

    Now I have a different Main.rtf using Common.rtf like that
    <?import: file:///I:/MyTemplates/Common.rtf?>
    <?call@inlines:Header?><?end call?>
    Common.rtf content is perfectly visible in Main.rtf but any configuration execution for 'file location' Main.rtf possible?

    Basic requirement is to run in any computer without making any changes to the 'file location' in Main.rtf again and again. Are there property server_url or something like that what can be used in RTFs?

    Any kind of help will be appreciated. Thank you very much.

    -Sookie

    Hello

    You should be able to save the common model on the server and be able to import it via a URL call...

    Read this article by Tim Dexter: http://blogs.oracle.com/xmlpublisher/2009/06/conditional_headers.html

    Thank you!

  • Firefox prompts to save passwords of websites. The key to the Password Manager icon appears on the left side of the address bar, but the corresponding window asking if I want to save the password or not, does not appear. I tried all the possible solutions

    I installed the latest version of Firefox on my laptop (Windows 7 Professional 64-bit). The thing is that firefox prompt to save passwords of websites. I'll explain you a little more away with an example: suppose I load www.gmail.com. When I login, the password manager key is displayed on the left side of the address bar, but the corresponding window which would ask if I want to save the password or not, does not appear. I tried all the possible solutions. It is true that when I restart firefox with disabled modules (safe mode), password manager works fine. But I don't really use Add-ons that could prevent firefox to save passwords. I disabled all add-ons and ran firefox in normal mode, but the password manager does not work yet. Please keep in mind that I tried everything and that any post not published so far describes a similar problem to mine case. Consider that I have the same I have configured the entire system from the beginning. The problem appeared again from the first time I launched firefox. At that time, I had not installed any antivirus software and there is no add-on with firefox. Hope someone can give me a valid solution...

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

    It is possible that there is a problem with key3db and signons.sqlite files that store the encrypted names and passwords in Firefox.

    Rename signons3.txt and signons.sqlite files in the Firefox profile folder.

    You can add .old files (key3.db.old and signons.sqlite.old) names or move them to another folder to make it possible to cancel the action.

    You must define a new master password after renaming or removing the signons3.txt and all the currently saved passwords are lost.

    If that worked, then you can delete the renamed files that are no longer needed.

    See:

Maybe you are looking for