Proof of course completion

Is there evidence of accomplishment for free online courses offered through iTunes U?

N °

Tags: iOS Apps

Similar Questions

Certificate of course Completion - check Score incorrectly

CP4, I have the widget certificate of completion of course work, except for save properly if the user succeeded or failed. For a CP course module, I have a quiz with questions 9, 10 points per question. In Preferences > success or failure, I checked 80 points or more to spend. When I publish the course, take the quiz by answering 9 of 10 correctly, the certificate of completion courses shows '22,22' points and a 'fail' - which miss me to have a slope of course display correctly? See image screenshot...

Hello

This is strange!

Could you please send your .cp project at [email protected]. I would like to take a look inside.

Sikandar

The Captivate team

Captivate course completed not completed in LMS
Hi all
I desperately need help! I am a new user to Captivate and have encountered a problem with one of the seven learning modules created for a course. Module 2 is not followed as completed in the LMS. I checked several times to make sure that all settings and configurations for all seven modules are the same. They are!

The only difference in content is that Module 2 a lot of objects flash, more than three times that of an other six modules. Module 2 does not have any question slide, as all but one of the other modules where. I mention this because when we try to get technical assistance they did ask questions on question slides.

I ran for this module debug mode in the LMS and also for Module 1, which is successfully completed. What I found, by comparing the information from the debug mode, is that Module 2 is not initialized. LMS hosting provider said us it is a problem of educational support and is not helping find a solution. I compared the HTML files generated by Captivate from the publication process, and they are exactly the same, except for the name of the module.

I have no idea what to do from here, and I'm under great pressure to find a solution. This is the first course, I created using Captivate.

Thanks for any help.
Charlotte
Is there something in the Module 7, which is the subject of a follow-up? It's not * have * to be a
the question slide. It could just be a button...
Erik

Charlotte C wrote:
> Eric... Thanks for the suggestion.
> I'll add a question slide that suggest you, publish and test in the LMS.
> Just so you know, Module 7 in the same course with the same parameters is
> successfully followed finished but has no no question slide either.
>

--
Erik Lord
http://www.capemedia.NET
Adobe Community Expert - Authorware
http://www.Adobe.com/communities/experts/
------------------------------------------------------------------------
http://www.awaretips.net - samples, tips, products, FAQ, and links.
* Search A newsgroup archives'ware *.
http://groups.Google.com/group/Macromedia.Authorware

Bloggie MHS-TS20 unacceptable flaw

I don't know if everyone has not yet this device, but the new Bloggie, the 1080 p 8 GB version, has a terribly annoying rattling during playback of a large number of the videos I've done so far. Clicking on occurs on the device and after that you have downloaded to your computer. My first thought was, it was the sound of the camera trying to focus, but that doesn't seem to be the case after having tested a bit, I did today. It just seems to appear randomly, and as luck may have, during the BEST moments captured on video with my two year old daughter, who of course completely ruins the video if she said something cute. Video is superb, the sound is also excellent, but this trigger is unacceptable. Everyone knows this? These issues can be addressed by Sony through updates to the firmware or driver, or am I stuck with it?
Thank you!

Yes the USER-927502, I have the same problem too. I bought just as there are 4 days, but it does sometimes, at random. I thought it was me bread near the microphone or maybe because I was shaking the camera, but now that you mention it, I'll do the tests and research.
----------------------------------
PS. , the best way to see your video (*.) MP4) is using Windows Media Player and download the DivX Codec or Divx Player

Pavilion dv6-6145eo: malfunction of the USB 3.0 driver

I installed an SSD drive on this laptop. I used a DVD of Windows 7 Setup Home Premium original. The computer works fine, except for the 3 USB connectors on the left side of the laptop. They provide power so that if I connect a mouse, it lights up. If I connect an external hard drive, I hear he's starting to run, but it will not be shown on 'this computer '. If I connect it to one of the two connectors USB 2.0 on the right side, it will appear on 'this computer '.

Through the HP Web page, I downloaded and installed the recommended driver "Renesas USB 3.0 Host (a.s.o.) but I can see in the"Enhetshanteraren"(Swedish)"Regulator"(my translation to English) that there is a (!). -mark on this device and to information, it is said to "Den har maskinvaran kan inte startas cket dess konfigurationsinformation I registret ar ofullstandig eller skadad. (Code 19) ' (Swedish) "this hardvare unit cannot start because its configuration information is unsufficcient or damaged (code 19) ' (my translation).

I used the driver you recommend, but it won't work. I wonder if eventually there are versions of this computer where there is another type of USB 3.0 hardware. It worked perfectly until I changed the hard drive.

Thank you

Ingemar

Almost forgot to write about how it ended. Well, actually it was something I haven't mentioned from the outset: I had moved this computer a HP dv6 SSD drive to another, I wanted to test the differences of their performances, because one of them had a value more high processor speed - they were not of the same model year and slightly different from each other. Initially, they both seemed to work perfectly. But it was a mistake on my part to do so, and slowly, I had the idea that it was the cause of the anomaly of USB 3.0.
After returning the SSD drive, I had to reinstall Windows and everything, of course, completely, and after doing so the two ports USB 3.0 worked perfectly again.

So, thank you for any help and I'm to blame for not to talk about my mistake to move drives between the two machines, which obviously must have caused a sort of '' corruption '' what drivers, and it did not help when I tried to install the correct driver, then. However, I haven't noticed any problem on the other laptop, that have no USB 3.0 ports and uses the "mechanical" hard drive, installed at the factory. Everything seems to work perfectly on it.

Thank you

Sweden's Ingemar

Method to check the VISA resources is ready for writing.

Dear Forum, I have a piece of equipment that I connect to LabView via serial. The companion of the Instrument is of course completely useless, which fails for inexplicable reasons, but everything works perfectly in hyperterminal.

When I try to adapt the example "basic series write and Read.vi" at my request, the implementation is very simple. However, it does not work despite working in hyperterminal. After a bit of investigation, I have determined that the problem is that after "VISA set up Serial Port" port is not * actually * available for writing quite yet, most likely because it is a very old computer.

By inserting a delay between the "VISA set up Serial Port" and the "VISA Write" I am able to get the program works as expected 100% of the time. However, it is a very bad solution, because this long delay can be totally useless and performance on the computer to an end user (which may be much better than this one). Especially because this piece of equipment has 8 analog inputs, 8 analog outputs, 4 relay, 20 outputs 24VDC, 8 DIOs and 3 ports RS232 passthrough so it communicates a lot of data.

Is there a function I can use to * guarantee * that the COM port is really ready for writing? If I could do this, then it can return almost immediately on a fast computer, while leaving enough time for computers slower finish opening the port. It may well be something that happens on the side of the pilot of the command windows open port.

It comes to LabView 8.20 running on a Windows XP in VirtualBox on Linux host. Please don't just tell me that I shouldn't use virtualized Windows, I am sure that this problem occurs for the disabled of old material as well as it is the only significant in terms of series API difference. The virtualized instance is only likely to be more slow material dealing with than it would be otherwise.

You can get information on the creation of an Instrument Driver Networkdriver.

If your instrument does not return an ID and you can not do a reset, then obviously your initialize function would not code for this. Having the code that defines the instrument on certain default configuration is common.

I don't know how this driver is intended to be used. Do you want that he NOR certified. The driver needs to be distributed outside of your company? It seems that the problem with your com port is unique to your pc and the installation program. How many times this would appear to other users?

Canon Powershot S5IS + overexposed photos - error

Hello

hope it subject has not been discussed before - at least I haven't found it. If so, sorry to you all.

My S5IS suddenly started taking overexposed pictures (totally white) outside (regardless of the settings, modes). The Interior is still overexposed with horizontal lines. The videos are always great, the phenomenon is only in photo mode.

What I've tried: reset to fact. parameters, out of battery while long exposure to blocked if shutter Lair - nothing helps so far. Shutter works (in motion).

It can be repaired? I'm willing to consider the solution apart as appropriate there. Warranty is of course complete.

Any idea?

Thank you very much in advance!

Best regards: Hollay F.

I have a complete and repair manual S5IS work.

You can get a good S5IS in working condition on the sites of the auction for much much less than the cost of a repair. Maybe in the range of $50. The most likely causes of your problem, such as listed in the manual is the main PCB CM1-4115-000 or the optical block CM1-4222-000, also called all of the lens.

How to disable a remote registry

told me to disable a remote registry for security problems

told me to disable a remote registry for security problems

The remote registry is a service that I always turn off on new installations. Click on the round of Windows (start) > all programs > administrative tools > Services, scroll to a remote registry and disable it. It is, of course, completely reversible.

army06

My problem. Worked on it for 3 days with the help of Microsoft. Without success. I tried to Win 10. I could not as my Win 7 has been altered, told by MS tier 2 agent. 8 / 10, it replaced my bad win 7 with a good and after that update updates more than 190 attempted to load Win 10, could not as I had no new product for the new Win 7 key. The old key not be applied to the old Win 7 previously on my machine. I was told by another that help of MS agent that I should have received a new product key for activation. I was not the case. Enter the third officer. He said that could not do anything for me. Option 1 is to restore the old Win 7 OS and use the old product key. OK, but it is the old bad OS and therefore won't make me win 10 because that is what started this drill. Option 2, buy a new product key for my new Win 7 OS. How can I do and how MS ID the new Win 7 system and the new key to go with it. Option 3, buy a new machine with Win 10installed. I look forward to rant, but this is unacceptable Microsoft help me in this mess and now falls me like a hot potato they can't deal with. Any suggestions?

Army06

If you want to, a lot of people manually install the upgrade successfully. If it's something that you want to do, here is a set of directions step by step on how to do it.

Please read carefully before you begin.

Step 1. Go to control panel, click Windows Update, select, and install all the updates available, the most important and those optional.

Step 2 Once you are done with this, pull the top of your Start menu and see if there is an icon on your start/stop option. If so, restart your computer so the updates can be configured with the system and vice versa. If you don't see this icon, then go to step 3.

Step 3 Return to your Windows Update and check the updates, if this is not to say all are needed, look in the left column and click on the option "search for updates". If the updates is displayed, install them also (the most important and those in option). If it is up-to-date and no update is available, go to step 4.

Step 4. Plug your laptop into its charger and let it plugged into a power source for the rest of these steps (if you have a desktop computer, you can of course skip this step)

Step 5 Open the Panel control, click System, look to see if you are running a 32-bit or a 64-bit system. Don't forget that number with precision, because you need to know for the next step.

Step 6 Click on the link at the bottom of this message, download the Media Creator tool that is appropriate for the bits that you are running with your system, either 32-bit or 64-bit.

Step 7 Once the Media Creator tool has downloaded completely, close all programs and run the program Media Creator tool. Follow the instructions that you may encounter. NOTE: This step here, may or may not take a long time and it is quite normal and WAITED for your screen may blink and restarting your laptop / desktop some, those who are normal.

Once the program has run its course completely and correctly, you will have a new Windows 10 operating system on your device.

https://www.Microsoft.com/en-us/software-download/Windows10

BlackBerry Z10 works: "your device is not connected to a network", but the staff is OK

Good day to all,

We have a BDS server work with IBM Traveler.

We have 1 user who, since this morning, cannot receive email.

After looking around on the traveler and the BDS, servers, we found no manifest error.

On the phone, we can see that the Internet/personal workspace work perfectly.

But the BES 'Account' is in the status "not connected" and when you walk inside to examine the configs, we get the red message "your device is not connected to a network. To connect to a network and try again.

That is, of course, completely false as works of personal data and its other, personal accounts work correctly as well.

10.1 device.

We triied what follows (no license):

-> Stop / start the data on the device.

-> Stop the data + mobile network > both start

->, Restart the phone

-> Go into airplane mode > back to normal.

We triied to reproduce the issue with the other 2 phones: both work well. If only 1 phone has the question.

The BES server shows that, since the beginning of the question, we get this:

<#03>[30371] (05/23 11:35:39.365): {0xAD4} {John Smith} Packet cancelled locally, Tag = 1520726

We consider the deletion/re-create the account of a last resort and to explore other alternatives to build our knowledge base... but we are few ideas here!

Any suggestions?

Thank you very much!

Jonathan

you have the BlackBerry logo next to your connection?

If not then do a batterypull while the power is on and see if it comes back

happened twice with me

Problem starting MouseKeys, StickyKeys

I hope this is the right place to ask the question, it seems most appropriate to me...

I use MouseKeys, StickyKeys to improve my performance in a game involving tons of click. Mentioned under the name correctly in ' Ease of Access Center > facilitate the use of the keyboard ' "when you select these settings, they will start automatically whenever you log in. That's exactly my problem, once the MouseKeys or sticky keys have been activated, they come back when I log into Windows, even though I turned off before stopping. I tried to use regedit and change the values to the default, but it does nothing, it only changes things like default return speed settings. Reboot and they are back.

Is it possible to make sure MouseKeys and StickyKeys does not start. I would like that they by default without, of course, completely remove it from my computer. Thank you.

Disable sticky keys and mouse keys should not be automatically activated the same.

You can check these links:

http://www.howtogeek.com/HOWTO/Windows-Vista/disable-the-irritating-sticky-filter-keys-popup-dialogs/

http://www.ofzenandcomputing.com/zanswers/2532

BlackBerry Smartphones BlackBerry apps direct download failure

Sir/Madam:

I tried to install applications and themes on my BlackBerry Bold 9780 which once tried repeatedly showed the waiting state and another option to continue your research. It has no use wvwn though I've tried many times and also restarted my phone several times. Please help me with a solution.

Thank you.

Thank you very much, it is much more clear. It is, of course, completely different from your first post, so let's ignore your original report and stick to here where you are now. See this KB:
- KB29599 Web plug-ins, AppWorld error when you try to install applications from a computer
As you can see, this is a known issue with no resolution at this time. Which is recommended, is that you disconnect your PC and use the AW interface on the device to get what you want.

Good luck!

Oracle Streams Advanced Queuing and advanced replication

Hi experts,
I don't have much experience in Oracle. Please tell me what is "Oracle Streams" in simple words. What is use of this example.
difference between "Oracle Streams, advanced and advanced replication queues".
Reg,
Hard

Hi harsh,

I'll try and simply summarize for you.

(1) advanced replication - the ancient mode of replication of data between databases - no one really uses this method more (even if it's still there)

(2) AQ (or now renamed as streams AQ I think) is a technology of queues for the publication and subscription to messages - it is not a replication method on its own, but is a key technology for manufacturing workflow

(3) water - a replication technology course complete with a huge amount of flexibility (and complexity) - one of the best tools of the oracle set product - but it is now be depracated in favor of goldengate (in large part because GG is a costly option, personally, I think)

(4) goldengate - just like rivers but can replicate to/from databases (Sql server, sybase etc.) non-oracle

streams and goldengate roughly the same work but are implemented very differently - flow is much plsql and queues, GG is to learn another language (although scripting tool really)

hope that helps.

See you soon,.

Rich

Installation of EM12c. Safety officer... Failed.
* 11.2.0.3 *.
Solaris x 64

On Monday, I met next number during the installation of EM12c:

INSTALLATION MAIN SCREEN JOURNAL
-----
INFO: agent of oracle.sysman.top.agent:Securing... Has begun.
INFO: oracle.sysman.top.agent:
Enter the password of the Agent:
Enter the password of the Agent:
Fixing agent... Failed.
-----
Since it is test environment, I put the following password - sys/sys (while DBCA), and for users of the MA, I put - "q1w2e3r4".
This passwords comply with all recommendations of runInstaller.

Setup request recommended to do me the following steps:
-----
INFO: oracle.sysman.top.agent:Follow the following steps to secure and add the targets of the host and the agent manually:
+ 1. Run the command: / cloud/esi/middle/agent/agent_inst/bin/emctl security officer.
+ 2. Start the agent by running the command: / cloud/esi/middle/agent/agent_inst/bin/emctl start agent.
+ 3. Add the target by running the command: / cloud/esi/middle/agent/agent_inst/bin/emctl config agent addinternaltargets +.
GRAVE: oracle.sysman.top.agent:Agent configuration failed
-----
But this returns the same result:
-----
Oracle@standby:/cloud/ESI/Middle/agent/agent_inst/SYSMAN/log$/cloud/esi/middle/agent/agent_inst/bin/emctl security officer
Oracle Enterprise Manager 12 c Cloud Control 12.1.0.1.0
Copyright (c) 1996, 2011 Oracle Corporation. All rights reserved.
Officer is arrested... Fact.
Fixing agent... Has begun.
Fixing agent... Failed.
-----

Content of /cloud/esi/middle/agent/agent_inst/sysman/log/secure.log
-----
+ [20/02/2013 13:17:59] USERINFO: officer is arrested... Fact. +
+ [20/02/2013 13:17:59] USERINFO: security officer... Started. +
2013-02-20 13:17:59, 978 [main] INFO agent. SecureAgentCmd secureAgent.235 - asking an HTTPS URL to download the who +.
2013-02-20 13:17:59, 981 [main] INFO agent. SecureAgentCmd openPage.838 - opening: https://standby:4899/empbs/genwallet +.
2013-02-20 13:18, 117 [main] error agent. SecureAgentCmd main.212 - did not the Agent: +.
java.net.ConnectException: connection refused
at java.net.PlainSocketImpl.socketConnect (Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:351)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:213)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:200)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:529)
at java.net.Socket.connect(Socket.java:478)
at java.net.Socket. < init > (Socket.java:375)
at java.net.Socket. < init > (Socket.java:218)
at javax.net.DefaultSocketFactory.createSocket(SocketFactory.java:212)
to HTTPClient.HTTPConnection$ EstablishConnection$ 2.run(HTTPConnection.java:4268)
at HTTPClient.HttpClientConfiguration.doAction (HttpClientConfiguration.java:708)
at HTTPClient.HTTPConnection.doAction (HTTPConnection.java:5379)
to HTTPClient.HTTPConnection$ EstablishConnection.run (HTTPConnection.java:4254)
+ [20/02/2013 13:18] USERINFO: security officer... Failed. +
-----

Complete this step in the installation log:
-----
NEWS: oracle.sysman.top.agent:About to run the plugin Wizard Agent Configuration
INFO: oracle.sysman.top.agent:The Assistant de Configuration Agent plug-in is running
INFO: oracle.sysman.top.agent: Internal PlugIn class: oracle.sysman.agent.config.AgentConfiguration
INFO: oracle.sysman.top.agent:Classpath = /cloud/esi/middle/agent/core/12.1.0.1.0/oui/jlib/srvm.jar:/cloud/esi/middle/agent/core/12.1.0.1.0/jlib/agentConfig.jar:/cloud/esi/middle/agent/core/12.1.0.1.0/jlib/emConfigInstall.jar:/cloud/esi/middle/agent/core/12.1.0.1.0/sysman/jlib/emagentSDK.jar:/cloud/esi/middle/agent/core/12.1.0.1.0/modules/oracle.http_client_11.1.1.jar:/cloud/esi/middle/agent/core/12.1.0.1.0/sysman/jlib/log4j-core.jar
INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration has been started.
INFO: oracle.sysman.top.agent:Parametes passed to the configuration of the agent are:
+1.ORACLE_HOME=/cloud/ESI/Middle/agent/core/12.1.0.1.0+
+ 2.AGENT_PORT = + * <-should it BE EMPTY? *
+ 3.ORACLE_HOSTNAME = + standby
+ 4.b_doDiscovery = true +
+5.AGENT_BASE_DIR=/cloud/ESI/Middle/agent+
+ 6.AGENT_INSTANCE_HOME = +.
+ 7.s_hostname = + standby
+ 8.OMS_HOST = + standby
+ 9.b_startAgent = true +
+ 10.b_secureAgent = true +
+ 11.b_chainedInstall = true +
+ 12.b_forceConfigure = false +
+ 13.EM_UPLOAD_PORT = + 4899
+ 14.b_forceAgentDefaultPort = false +
+ 15.s_staticPorts = +.
INFO: oracle.sysman.top.agent:Validating OMS_HOST and EM_UPLOAD_PORT
INFO: oracle.sysman.top.agent:EM switch protocol determined: https
Information: Detection of port franc oracle.sysman.top.agent:Performing...
INFO: oracle.sysman.top.agent: the agent port is 1831
INFO: oracle.sysman.top.agent:Paths after canonical format conversions are:
+ 1. state_dir = / cloud/esi/middle/agent/agent_inst +.
+ 2. agentBaseDir = / cloud/esi/middle/agent +.
+ 3. oraHome=/cloud/esi/middle/agent/core/12.1.0.1.0+
INFO: oracle.sysman.top.agent:Parent of an agent instance home directory: / cloud/esi/middle/agent
NEWS: oracle.sysman.top.agent:AgentConfiguration:perform:AgentPortHandler for /cloud/esi/middle/agent/core/12.1.0.1.0 and hosts = standby Port returned to use = 1831
INFO: oracle.sysman.top.agent:Instantiating #DEFAULT_EMSTATE emctl.template file # with/cloud/esi/middle/agent/agent_inst
INFO: oracle.sysman.top.agent:Writing summary of what follows in /cloud/esi/middle/agent/core/12.1.0.1.0/install/oragchomelist
INFO: oracle.sysman.top.agent:/cloud/esi/middle/agent/core/12.1.0.1.0:/cloud/esi/middle/agent/agent_inst
INFO: / var/opt/oracle/oragchomelist and oracle.sysman.top.agent:Both/etc/oragchomelist does not exist.
INFO: oracle.sysman.top.agent:Executing emctl deploy agent command...
INFO: oracle.sysman.top.agent:AgentConfiguration: execution emctl deploy command agent...
INFO: oracle.sysman.top.agent:Executing the command: /cloud/esi/middle/agent/core/12.1.0.1.0/bin/emctl deploy eve of Eve: 1831 officer-L o: 4899 n/cloud/esi/middle/agent/agent_inst
INFO: oracle.sysman.top.agent:Creating shared install...
INFO: oracle.sysman.top.agent:Source location: /cloud/esi/middle/agent/core/12.1.0.1.0
INFO: oracle.sysman.top.agent:Destination (shared facility): / cloud/esi/middle/agent/agent_inst
INFO: oracle.sysman.top.agent:Secure Mode: No.
INFO: oracle.sysman.top.agent:DeployMode: agent
INFO: oracle.sysman.top.agent:
INFO: directories oracle.sysman.top.agent:Creating...
INFO: oracle.sysman.top.agent:Creating private.properties...
INFO: oracle.sysman.top.agent:Creating blackouts.xml...
INFO: oracle.sysman.top.agent:Creating targets.xml...
INFO: the emctl oracle.sysman.top.agent:Creating control program...
INFO: oracle.sysman.top.agent:Creating emtgtctl control program...
INFO: oracle.sysman.top.agent:Agent will be more fixed. * <-IT CONFUSED me a BIT *.
INFO: oracle.sysman.top.agent:Secure found REPOSITORY_URL. New agent must be configured for secure mode
INFO: oracle.sysman.top.agent:Secure found emdWalletSrcUrl. New agent must be configured for secure mode
INFO: oracle.sysman.top.agent:Oracle Enterprise Manager 12 c Cloud Control 12.1.0.1.0
INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2011 Oracle Corporation. All rights reserved.
INFO: oracle.sysman.top.agent:Property "agentTZRegion" is missing in cloud/esi/middle/agent/agent_inst/sysman/config/emd.properties. Update it...
INFO: oracle.sysman.top.agent:Default the system time zone is: GMT04:00 which is not supported. Installation of a default timesone of GMT +.
INFO: oracle.sysman.top.agent:An agentTZregion "GMT" is installed in cloud/esi/middle/agent/agent_inst/sysman/config/emd.properties.
INFO: command oracle.sysman.top.agent:The: /cloud/esi/middle/agent/core/12.1.0.1.0/bin/emctl deploy agent-L o Eve: 4899 n/cloud/esi/middle/agent/agent_inst standby: 1831 sleep finished with status = 0
INFO: oracle.sysman.top.agent:Executing the command: security officer/cloud/esi/middle/agent/agent_inst/bin/emctl
INFO: oracle.sysman.top.agent:Oracle Enterprise Manager 12 c Cloud Control 12.1.0.1.0
INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2011 Oracle Corporation. All rights reserved.
INFO: oracle.sysman.top.agent:Agent is already stopped... Fact.
INFO: agent of oracle.sysman.top.agent:Securing... Has begun.
INFO: oracle.sysman.top.agent: Enter password for Agent:
Enter the password of the Agent:
Fixing agent... Failed.
INFO: command oracle.sysman.top.agent:The: / cloud/esi/middle/agent/agent_inst/bin/emctl officer course completed with status = 1
SEVERE: secure order agent oracle.sysman.top.agent:emctl failed with status = 1
INFO: oracle.sysman.top.agent:Follow the following steps to secure and add the targets of the host and the agent manually:
+ 1. Run the command: / cloud/esi/middle/agent/agent_inst/bin/emctl security officer.
+ 2. Start the agent by running the command: / cloud/esi/middle/agent/agent_inst/bin/emctl start agent.
+ 3. Add the target by running the command: / cloud/esi/middle/agent/agent_inst/bin/emctl config agent addinternaltargets +.
GRAVE: oracle.sysman.top.agent:Agent configuration failed
INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration done with status = false
INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration done with status = false
INFO: oracle.sysman.top.agent:The Assistant de Configuration Agent plug-in failed his method
-----

When he checked first pre-reqs, he said my host name not provided.

The/etc/hosts entries seems appropriate for this.

-----
root@standby:~# cat/etc/hosts
+#+
+ # Copyright 2009 Sun Microsystems, Inc.. All rights reserved. +
+ # Use is subject to license terms. +
+#+
+ # Internet host table.
+#+
+: 1 localhost ensures +.
+ Watch 127.0.0.1 standby.rnd.ivc.zkh +.
-----

corresponding log files

Oracle@standby:/cloud/ESI/Middle/agent/agent_inst/SYSMAN/log$ vi emdctlj.log
-----
+ 2013-02-20 13:17:59, [main] INFO 076 - EmdCtl Timezone = GMT + 04:00 +
2013-02-20 13:17:59, 203 [main] INFO - order: agent status.
2013-02-20 13:17:59, 305 INFO [main] - unable to connect to the agent at http://standby:1831/emd/life/hand cycle / [connection refused] +.
+ oracle.sysman.emSDK.agent.comm.exception.ConnectException: unable to connect to the agent at http://standby:1831/emd/life/hand cycle / [connection refused] +.
at oracle.sysman.gcagent.comm.oms.http.TMClientConnection.newConnectException(TMClientConnection.java:217)
at oracle.sysman.gcagent.comm.http.ClientConnection.makeConnection(ClientConnection.java:815)
to oracle.sysman.gcagent.comm.oms.http.TMClientConnection. < init > (TMClientConnection.java:80)
at oracle.sysman.gcagent.comm.oms.http.HTTPClientTerminus.connect(HTTPClientTerminus.java:217)
at oracle.sysman.gcagent.oms.TMRemoteClientFactory.getCommunicatingClient(TMRemoteClientFactory.java:177)
at oracle.sysman.gcagent.oms.TMRemoteClientFactory.createEmdCtlClient(TMRemoteClientFactory.java:76)
at oracle.sysman.gcagent.clients.emdctlj.commands.EmdCtlAgentStatusCommand.execute(EmdCtlAgentStatusCommand.java:94)
at oracle.sysman.gcagent.clients.emdctlj.EmdCtlParsedCommandHandler.executeCommand(EmdCtlParsedCommandHandler.java:88)
at oracle.sysman.gcagent.clients.emdctlj.EmdCtl.parseAndExecute(EmdCtl.java:149)
at oracle.sysman.gcagent.clients.emdctlj.EmdCtl.main(EmdCtl.java:414)
Caused by: java.net.ConnectException: connection refused
at java.net.PlainSocketImpl.socketConnect (Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:351)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:213)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:200)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:529)
at java.net.Socket.connect(Socket.java:478)
at java.net.Socket. < init > (Socket.java:375)
at java.net.Socket. < init > (Socket.java:218)
at javax.net.DefaultSocketFactory.createSocket(SocketFactory.java:212)
to HTTPClient.HTTPConnection$ EstablishConnection$ 2.run(HTTPConnection.java:4268)
at HTTPClient.HttpClientConfiguration.doAction (HttpClientConfiguration.java:708)
at HTTPClient.HTTPConnection.doAction (HTTPConnection.java:5379)
to HTTPClient.HTTPConnection$ EstablishConnection.run (HTTPConnection.java:4254)
2013-02-20 13:17:59, 351 [main] INFO - disconnection: client terminal +.
2013-02-20 13:17:59, 351 [main] INFO - stderr: agent of State failure: unable to connect to the agent at http://standby:1831/emd/life/hand cycle / [connection refused] +.
2013-02-20 13:17:59, 351 INFO [main] - Exit Code: 1 +.
-----

*/Cloud/ESI/Middle/agent/agent_inst/SYSMAN/log/gcagent.log*
-----
2013-02-20 10:54:36, 848 [1:main] ERROR - Impossible to build HTTPS context for url https://standby:4899/empbs/upload /: +.
+ Java.IO.IOException [impossible to open the wallets of proxy server] +.
+ Java.IO.FileNotFoundException [cloud/esi/middle/agent/agent_inst/sysman/config/server/repoconn.ora (no such file or directory)] +.

Oracle@standby: ls-l /cloud/esi/middle/agent/agent_inst/sysman/config/server/repoconn.ora
+ / cloud/esi/middle/agent/agent_inst/sysman/config/server/repoconn.ora: no such file or directory.
-----
Hello

Secure Agent step fails with the error ' java.net.ConnectException: connection refused "in the file secure.log
Of the causes is the incorrect entry in the file/etc/hosts

---------------------------------------
: 1 localhost ensures
127.0.0.1 watch standby.rnd.ivc.zkh
---------------------------------------

You need to change it as below:

---------------------------------------
: 1 localhost
127.0.0.1 localhost
Watch Standby.RND.IVC.ZKH
---------------------------------------

Once this is done, you will need to clean the installation failure:

(a.) emctl stop who-all - force
(b) check here any running java process. If so, kill them.
(c.) uninstall EM 12 c as indicated in
http://docs.Oracle.com/CD/E24628_01/install.121/e24089/deinstall_em.htm#CHDFHIAF
(d.) re - try the installation of 12 c EM now. who should succeed.

Best regards
Blabla

Nulls in a row clubing

Hi friends,

I have a query, below, which returns details of the following courses completed by him and the year of completion for each course.

SELECT distinct PERSON_ID,DECODE (NAME, 'School Certificate',START_DATE) S_START_DATE,
DECODE (NAME, 'School Certificate',END_DATE) S_END_DATE,
DECODE (NAME, 'School Certificate', TITLE) SCHOOL_CERTIFICATE,
DECODE (NAME, 'Bachelors Degree', TITLE) BACHELORS,
DECODE (NAME, 'Bachelors Degree',START_DATE) B_START_DATE,
DECODE (NAME, 'Bachelors Degree',END_DATE) B_END_DATE,
DECODE (NAME, 'Masters Degree', TITLE) MASTER,
DECODE (NAME, 'Masters Degree',START_DATE) M_START_DATE,
DECODE (NAME, 'Masters Degree',END_DATE) M_END_DATE,
FROM PER_QUALIFICATIONS_V
WHERE NAME IN
('School Certificate','Bachelors Degree', 'Masters Degree')
AND PERSON_ID = :PER_ID

If im running the above query means, im getting the results as lower

PERSON_ID---S_START_DATE---S_END_DATE---SCHOOL_CERTIFICATE---BACHELORS---B_START_DATE---B_END_DATE---MASTER---M_START_DATE---M_END_DATE
79 - Null Null - Science Business - 31413-32509 null - Null - Null Null.
79---null---null---null---null---null---null---science man - 34335-35065
79---NULL---NULL---NULL---NULL---NULL---NULL---Research---34335---35065 deg

But im get three lines for the same number of employees, in spite, he holds a Bachelor's degree and two master's degree.

I need to get a result comparable to the below,

PERSON_ID---S_START_DATE---S_END_DATE---SCHOOL_CERTIFICATE---BACHELORS---B_START_DATE---B_END_DATE---MASTER---M_START_DATE---M_END_DATE
79 null - Null Null - Science Business - 31413-32509 - Humanities - 34335 - 35065-
79------------------------------Null-------------------Null---------------------------Null-------------------Null---------------------------Null-----------------Null-----------Research Deg-------------------------34335-----------------------35065

In this sense, means what I tried to say, if I have a Bachelor's degree and a master's degree means, I need to get only one line by clubbing the two rows that are returned in my query.

Assume that if the employee has a Bachelor's degree and master two ways, then it should not return as three rows as I mentioned earlier, it must return two lines like the one I mentioned second.

How it is possible to reach those clubbing of records.

Hope you understand my scenario, well. Sorry could not provide DDL and DML as these tables are my seeded tables which returns lines more.

Thanks in advance.

Kind regards
Vel

Hi, Vel,

You can change the Nicosa solution like this:

WITH     got_r_num  AS
(
     SELECT     person_id, name, start_date, end_date, title
     ,     ROW_NUMBER () OVER ( PARTITION BY  person_id, name
                               ORDER BY          start_date, end_date
                       )          AS r_num
     FROM    emp_qualification
)               -- Everything up to this point is new
SELECT
     PERSON_ID,
     max(DECODE (NAME, 'School Certificate',START_DATE)) S_START_DATE,
     max(DECODE (NAME, 'School Certificate',END_DATE)) S_END_DATE,
     max(DECODE (NAME, 'School Certificate', TITLE)) SCHOOL_CERTIFICATE,
     max(DECODE (NAME, 'Bachelors Degree', TITLE)) BACHELORS,
     max(DECODE (NAME, 'Bachelors Degree',START_DATE)) B_START_DATE,
     max(DECODE (NAME, 'Bachelors Degree',END_DATE)) B_END_DATE,
     max(DECODE (NAME, 'Masters Degree', TITLE)) MASTER,
     max(DECODE (NAME, 'Masters Degree',START_DATE)) M_START_DATE,
     max(DECODE (NAME, 'Masters Degree',END_DATE)) M_END_DATE
FROM      got_r_num         -- changed
WHERE
     NAME IN ('School Certificate','Bachelors Degree', 'Masters Degree')
group by person_id
,           r_num          -- This line and everything after is new
ORDER BY person_id     -- if wanted
,           r_num
;

Proof of course completion

Similar Questions

Maybe you are looking for