Propeller works only with external power supply

Similar Questions

• No internet with an external power supply on L20

  Can connect to internet when my L20 runs own PSU, but when the battery level is low and demand for external power, internet connection is lost when my power adaptor attatched. In addition, internet does not connect if the external power supply is used from the outset. Disconnect the external power supply and run on battery, the internet connection can now take place! All thoughts.

  Try to check the polarity of the DC power coming out of the AC adapter is correct. In fact, make sure you have any dc voltage coming out of the adapter.

  I don't really understand what you describe. Do you really mean that ONLY the internet connection is affected. Everything works well on outlet. The power lights and disc are all about; the battery OK charges; the screen is lit; the fan is running and that these things will continue to work if you then removed the battery? (Except for the battery charge of course).

• External speakers work only with powerpoint.

  External speakers work only with powerpoint. DVD, internet, music files, are not. They worked for the first few weeks.

  I have a HP dv7-6c27cl with intel core i5 and Windows 7.

  When I have the system check it, it finds no problem.  Apparently, I have the latest drivers. The fact that the speakers work with powerpoint, which is confusing.

  When I play a video file or music, I get an error message: "Windows Media Player has encountered a problem while playing the file."

  The headset works for internet but not DVD.

  I've installed Weatherbug a week ago and had to uninstall other garbage that come with it. I think that's when the problem started.

  Well, I set myself just now. I did a system restore to a point before that I installed Weatherbug, and now everything's fine.

• ProBook 4530 s BIOS update fails - "...". the computer is not connected to the external power supply. »

  I made an update of the system to the original settings and everything seems to go as usual.  While performiong the many windows updates, I noticed that the battery indicator indicates "no battery installed.  I found a few solutions dealing with this problem (none of the other solutions worked) and that which is shown updating BIOS.  I checked and the BIOS is F.07 and the current version is F.41.  I downloaded the update and begun the process of Windows.  The system restarts to start the process, but when the BIOS updated starts I get the following message:

  "A significant update of the BIOS of the system is available, but the computer is not connected to the external power supply.  Please connect the external power supply and then press Enter to continue. »

  The computer is connected to the power of HP to the original address since it is the only way so he can turn it on.  I tried removing the battery and from the update only the connected power and get the same result.

  Either way, I tried to insert a different battery, I have more than one of these laptops.

  Sorry

  Please test the battery after boot press F2 HP Diagnostics

  http://support.HP.com/us-en/document/c00821429

  and calibration of the battery for laptop

  http://support.HP.com/us-en/document/c00817650

• NEITHER USB-8451 with external power source

  Hi all!

  I try to understand for 2 days now why my USB-8451 gave me a 301740 error: line SDA or SCL or both are in poor condition, or there is no pull-up resistance.

  I try to change a multiplexer channel in order to obtain a measure of the temperature of a sensor. I checked my SDA and SCL lines, thye are both in top condition and I have 2 resistors to pull up with a value of 10K.

  The only change with my older circuit, is I use an external power supply for my chip and a PCA9543 (texas instruments) MUX to select the sensor I need the data.

  Any who have encountered similar problems?

  OK guys,

  Apparently, the ground of my usb-8451 was not related to the land of my diet, it doesn't yet but my components react!

• ThinkPad T410 boots only if the power supply is plugged

  Hello

  I have a really strange bug. My thinkpad T410 (2537-UQF) with an OCZ Vertex 3 SSD boots only if the power supply is connected. If I have a full battery, and try to boot without the power I get a blue screen after about 60 seconds on the screen where the windows logo appears. I have Windows 7 installed fresh a few days ago.

  I think its possible, I've done a few failure with drivers. The power management ThinkPad always stops working after startup. So I deleted the program using the feature "msconfig".

  I'm not really sure what I can do about it. Any idea?

  Thanks for any answers in advance & regards

  Rain

  OK I solved the problem:

  The workaround is to set to battery power settings in the BIOS to auto. If the power in the Bios settings are on maximum battery life, the system does not start if you use the SSD OCZ Vertex 3.

  Hope this helps everyone who has the same problem. I need 4 days to understand this.

  Greetings, rain

• 3750 x with single power supply

  Didn't know exactly where this post I hope that I am close to.

  I have two 3750 x who were part of a stack, with stacked food.  A switch has two power supplies, the other alone.  How to configure the switch to use only a single power supply.  I always get an error that the battery more redundancy and works in mode of power-sharing.  The battery show power command returns:

  Name of battery power: Powerstack-1
  Stacking mode: redundant
  Topology of the battery: autonomous
  Switch 1:
  Power budget: 673
  Low-value priority port: 22
  The priority value high port: 13
  Change the priority value: 4
  Port 1 status: not connected
  2 port State: not connected
  Neighbor on port 1: 0000.0000.0000
  Neighbor on port 2: 0000.0000.0000

  Try:

  stack-power mode power-sharing

• Security concerns about the external power supply connected to the my map of 9401 TTL inputs

  I have an external power supply (5V DC, 500 my) that I use to test my card 9401 count entries and check my LV code is working properly. Power + 5V is used as high signal and ground as a weak signal.  I haven't done the link yet because I wanted to know if there is any concern to burn my card.

  Hello

  Normally, if everything is OK, it shouldn't be a problem.

  But in the real world "things" happen

  My Advisor is to add resistance series (in this case 1 k) to protect your device if Murphy enters the room something goes wrong.

• Does the HP 5500 - 24G - PoE + (JG541A) equipped with a power supply?

  The documentation is not clear. I need to know if a redeemable only in hot power supply is supplied with the JG541A switch. Documentation, says 'must select Min 1 Power Supply'.

  I guess there's one, but the image that HP has the back of the switch shows no power supply.

  Thank you!

  When you configure the switch for purchase it is also a time to select the power supply.

  See the address below quickspecs.

  http://WWW8.HP.com/h20195/v2/GetDocument.aspx?DocName=c04111542

• External Power Supply PHD 2.5 x camera

  Hello

  Does anybody know, if there is a power supply available for version 2.5 external x camera?

  and perhaps also the order number?

  The customer got offered with PSU-CAM-V, but I guess that's one for the 4 x and 12 x PHD Cams...

  Best regards, hans

  Hi Hans.

  See is one the PrecisionHDMC camera User Guide on pg 9, 2.5 x camera has a power connector as well as the 4 x and 12 x cameras of.  It does not say that the power connector is for future use, so it doesn't seem like it supports an external power supply at the moment.

• RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm has already released a version with support for the latest version of Firefox. See http://www.roboform.com/support/news. Try upgrading to the latest version of Roboform.

• How to use the external power supply on Camileo s20

  How the external power is connected to S20 and registration is possible at the same time. When the USB is plugged into my camera it will not turn on.

  1. open the battery cover
  2. remove the battery
  3 connect the usb power cable

  Now you can use S20 with external power without draining the battery.

  Crazy but true...

• HP 8200 elite CMT: can I use an external power supply for AMD Radeon HD graphics card 7770?

  I have HP 8200 elite CMT CPU in which 320 watts PSU is installed. I want to use AMD Radeon HD 7770 requiring more power (minimum 400 watts power supply) for maximum performance. But the fact is, the higher Watt PSU is not available for my cpu because its cables do not match that. So I ask if I can use the external power supply to power my GPU instead of the CPU power. Will be this harm to my PC?

  Kindly help me to solve this problem.

  Thank you

  Thank you for the information, @haseebkhan7310.

  I'm not a fan of using a separate power supply to power a video card.  It can cause problems.  However, here is a video that will show you how it can be done:

• Windows 7 works only with canon MX 340

  Canon MX 340 printer works only with windows 7.

  Canon MX 340 printer works only with windows 7.

  You mean the Canon PIXMA MX340?

  You have the following drivers installed? :
  http://www.USA.Canon.com/nw3s/CanonUSA/DownloadContents/English/0100461601EN.htm
  (As of 10/23/12)

• Lightroom works only with reduced funktionality. Develop module is not available.  Adobe can not find the license associated with my Adobe why identification code? Every month I pay an amount for PS and LR...

  After the upgrade to Windows 10 Lightroom works only with reduced funktionality. Develop module is not available.  Adobe can not find the license associated with my Adobe why identification code? I bought the license more than 1 year ago. Every month I pay an amount for PS and LR, and for the past 4 months I can't work. Russian support team cannot solve this problem and sent me here.

  Thank you! I reset my password, the problem was in it.