Property for the tab control node

Similar Questions

• get rid of the shadow of the legend in the tab control

  Hello

  I use LV7.0 on W2K and have encountered a difficulty.  Often when I need a text face before being modified programmatically, I'll put a control or the off indicator on the side (out of sight) and serve its legend of the label.  It keeps me from having to find a way to get a reference to a real label... which has always been a pain.  I just use a property node to edit the text in the legend.  My problem is, for the application, that I am currently in train, I need to use a tab control.  If I set the label (caption) in the tab control, it flies over, showing a shadow under it.  It doesn't know if the control is in the tab control only when the control is not in the tab control.  Is there a way to make this stop behavior?

  Thank you.

  Rick

  He's going to do. It was the way it was made to show you that it is not within the tab control. You should note however that when you start your program that the shadow will disappear. The shadow is there when you are programming.

• The table of waveform in the tab control

  Hello

  I would change the parcel number and the name of a waveform graph plotting in a tab control.

  First of all, it works fine without a tab control, but I have several cards (such as temperature, pressure, tension...) while I put every chart in the pages of a tab control.

  1077 error happened when I "add" the parcel number and change the name of the parcel.

  Here is a sample I did to describe this problem.

  

  Start, if the number is 20, there are 20 plots in this table on page 2.

  t

  Do not operate the switch, replace C 3, N-18 and run that and it can be seen that the tab control will pass to page 1.

  Switch to page 2 and field names are updated, but left a relic.

  

  Add N 22, replace C 2, and then run it again.

  Error 1077 has arrived! Go to page 2 and the parcel number is always 20, and field names are updated at 20.

  

  

  Run it again and it works fine!

  

  It is very difficult for me.

  If I spend first on page 2 and run the program, it works very well also.

  (In other words, if the switch is active, then the program works very well.)

  The version of LabVIEW mine is 2011.

  I don't know I missed or misunderstanded something about this problem.

  Is someone can give me any suggestions? Thank you very much

  Step 1: Do not use tabs, use sub-panels. You can get the same user experience, but with a much simpler code.

  Start here: http://www.notatamelion.com/2015/02/09/building-a-subpanel-based-user-interface/

  Mike...

• Tab in the tab control order

  Hi all

  I found in aid and other messages that you put inside the tab order a tab control by clicking with the right button on the page and selected redorder controls in the page.

  I'm using Labview 8.0 and for the life of me I can't get this to work. I clicked everywhere: places within the tab governed, on the page tab on the label, on the legend, on the label, etc. and I can't get the menu to appear.

  Anyone know the problem?

  

  Hi abeaver,

  I could find to rearrange controls on the Page in LabVIEW 8 on a page of specific tabs by right-clicking its edge. You have several controls on the page for the menu option is displayed (ie. it is not there if there is one or none of the controls on the specific page you want to rearrange):

  

  As regards the order of tabs when running when you have a tab control, you will have to use the arrow keys to navigate between the specific tabs in the tab control when it is selected (you cannot use the tab key). This is explained with more information here:

  http://digital.NI.com/public.nsf/allkb/C050233A993F14F88625698E007EB082

  I hope that helps!

• DRM Global prop node listed is not in the category for the lower level nodes

  Hello
  
  I created a global node property in a category as "derivative" and "overridable", and it seems to work fine in all groups of "alternate" and "alternate" hierarchies hierarchies.
  
  However, in the hierarchy of the HAND of the application of DRM, this same property of global node shows only in this category at the level of the SUPERIOR node. It does not appear in the category at any level lower node in the hierarchy of the HAND.
  
  Can someone help me with the problem? I need this global property to appear throughout the application of DRM in the hierarchy/Versions all groups/hierarchies/nodes
  
  Thank you!

  Hello

  See the definition of the property for the property assigned to the hierarchy node Type hierarchylevel property * and see if any node under evaluation there do not include property that you created in its definition of node type.

  If there are all these types of nodes, then you must include your property by visiting this particular node type.

  Thank you

  Denzz

• Inexplicable delay between the evolution of the tab control pages

  Hello dear OR Forum.

  I have a strange problem.

  In my program, I use a tab control.

  On a change in the pages of pc immediately once the user clicks on the other page, but on another pc it is delayed (approx. 1 second) until the new page is displayed. The rest of the program works with the same "speed".

  You have an idea why this happens?

  The main program includes a while loop with a delay of 25ms. In the loop, there is a case structure, cases are different pages of the tab control.

  (it's the same exe file)

  Thank you.

  Alex

  Tabs changing pages require a screen refresh if at least the graphics adapters could make all the difference.

  More memory in the faster machine...

  The slow mahcine there a virus check or other processes that use CPU?

  Ben

• Create a journal in the tab control tab and create tab is disabled and grayed out

  Hello

  Can you helpme to solve my question about the connection in the tab control? So basically I have two pages in a tab control, page 1 contains, log in as user name, password, and login button and second page is nothing. After the user has entered the correct user name and password in the form of a string, page 1 will be disabled and grayed out and automatically will be on page 2? I also download the vi that I created and please correct me if I have a problem with my vi.

  Please help me with this ASAP, because I have assignment based on the view of any customer lab server.

  Thank you

  
  

• Program switching a page on the tab control

  Hello

  I use LV8.6 and I have a menu drop-down selector to choose what unit I want to test.  This allows the page that controls the unit and disables others.  What I want to do is when the unit is selected, the page is enabled (which I did) and the page to be selected and view.  Does anyone know how this is done?

  Thank you

  Martin

  Simply change the value of the tab control. Send 3 and it'll show the 3rd page. If you create a constant, that it works as an Enum and will display the names of page as options.

  /Y

• single control on the tab control pages

  Hello world

  My request is to have control tab with multiple pages. I want to add Boolean Quit button in all the pages, but the functionality of the button is the same regardless of the page.

  How has one-button with multiple copies in the façade, so that we can single terminal in the blockdiagram otherwise provide your suggestion to make multiple copies of single control of the front wall.

  Thanks in advance

  Hi Kumar,

  who said often before:

  Create your button outside of the tab control, and then move it with the arrow keys (!) on the tab. You can use the "order/group" button in the menu if necessary...

• Customization of the tab controls

  Hello

  How to customize the tab control so that the place where we are writing on behalf of the tab must be in one color and the body of the tab control in a different color. See the image. It is the color below the black line should be one color and above should be a different color. Is this possible?

  

  You can also simply use a raised area (decorations) placed at each tab:

  

  Christian

• Password for the Parental control reset blackBerry Q5

  What part of the custom restoration contains the password for the 'Parental control'? I forgot one I have and need to reset it.

  Very probably the settings part that will hold but I don' t know for sure.

• I am trying to perform a static check on the model. When I double click the model and go to the tab control... There is nothing to select in the knowledge module. I want to use CKM here... but nothing appearing in the drop-down menu. The global KMs are no

  I am trying to perform a static check on the model. When I double click the model and go to the tab control... There is nothing to select in the knowledge module. I want to use CKM here... but nothing appearing in the drop-down menu. The global not supposed to KMs the listed here?

  Hello

  You have imported the whole CKM in modules of knowledge?

  If not, import ckm and do it.

  Kind regards

  Gangareddy.k

• How to create a list for the tabs 2nd level

  Dear Experts
  
  I created a view

  CREATE OR REPLACE FORCE VIEW  "MY_VW_TABS" ("APPID", "PTTARGET", "PTTABNAME", "PTTABLABEL", "TABNAME", "TABLABEL", "TABPAGE") AS
    select pt.APPLICATION_ID APPID,pt.TAB_TARGET PTTARGET,pt.TAB_NAME PTTABNAME,pt.TAB_LABEL PTTABLABEL,t.TAB_NAME TABNAME,t.TAB_LABEL TABLABEL,t.TAB_PAGE TABPAGE
  from APEX_APPLICATION_PARENT_TABS pt,APEX_APPLICATION_TABS t
  where t.tab_set = pt.TAB_NAME
  and pt.APPLICATION_ID=t.APPLICATION_ID
  order by pt.TAB_NAME,t.TAB_NAME

  I need to create a dynamic list based on this view of the * 2nd level tabs * (of my model of two-level tabs page), to be used in a region bordered on page 0. However, I found that the code in the list should be as follows:

  select level, labelValue label, 
         [targetValue]            target, 
         [is_current]             is_current_list_entry,
         [imageValue]             image, 
         [imageAttributeValue]    image_attribute,
         [imageAltValue]          image_alt_attribute,
         [attribute1]             attribute1,
         [attribute2]             attribute2,
         [attribute3]             attribute3,
         [attribute4]             attribute4,
         [attribute5]             attribute5,
         [attribute6]             attribute6,
         [attribute7]             attribute7,
         [attribute8]             attribute8,
         [attribute9]             attribute9,
         [attribute10]            attribute10
  from ...
  where ...
  order by ...

  Now, I have two questions:
  (1) how to use the view above to be used in the code of dynamic list?
  (2) is a good way to create a list for the tabs 2nd level?
  
  Best regards
  Mahmoud

  Mahmoud

  Are you sure that you view is correct?

  >

   where t.tab_set = pt.TAB_NAME
   
  

  Should be

  where t.tab_set = pt.current_for_tabset
  

  Nicolette

• The access key for the tab region

  Hello
  
  How to set accelerator keys ("Hot Keys") for the tab region on the page of the OFA. Can someone help me set an accelerator keys ("Hot Keys") for the region of the tab.
  
  Thank you
  JAI.
  
  Published by: nvpjai on March 7, 2011 16:35

  JAI,

  //Reference From Developer Guide
  Tip: At runtime, users can quickly navigate from one subtab to the next by selecting Alt + . (period) and Alt + ,
  (comma) from the keyboard. If you are using Microsoft Internet Explorer, these accelerator keys only focus on
  the subtab element, so to display the subtab contents, you also need to select Enter.
  

  Kind regards
  GYAN

• Check out the current programmatically tab when you use the tab control

  Hi, I'm kinda a n00b.

  I have 10 tables of data and I want to draw these 10 berries on 10 separate charts.  I don't want to clutter my screen so I made a tab control, with a tab for the path of each data table.  But I don't want to trace all at the same time, I want that each parcel having its own button "trace data" so that the user can customize the trace for each of these options.

  I could do with 10 pieces of code with 10 different buttons, but as I said I hate the mess, so I prefer to put all this into a business structure by which according to any tab the user has selected, when they press one 'plot data', labview gets data appropriate and plots as a result.

  Now, I know that the tabs are indexed and I can return at any time to any page given by using the property Node--> Pages, but I need a way to retrieve the index of the currently selected page.  Once I have that, I know how to do the rest.

  Is this possible?

  Thank you

  Jessie

  It is exactly what it seems that there is a terminal on the schema that represents the tab. On the front panel, right click and select 'Find the Terminal'.

  Here's the code 8.0.