PROTECTED M100 does not start on an internal CD, even though it is set in the BIOS

Well, I have a Toshiba protégé m100 here I think.

I set the boot priority in the BIOS such as CD-ROM > LAN > FDD > HDD

I restart, does not work. Starts directly in HD and loads the operating system.

I also tried pressing ESC or else bring up the start menu pop up.
I'm sailing on the 1 that looks like a single disk CD. I hit enter on that, and it always starts in HD.

The CD rom works. The current operating system is Ubuntu. I can go into Ubuntu and watch the windows XP CD...

But it won't let boot me from any cd, it doesn't even look like she is trying to find one. Does not sound or rattling noise.

(and for the record, I'll since Ubuntu XP to work, non-identifying preferably lol).

Edit: Oh yes, I had to disable the LAN network card in the bios because the boot priority would ignore the cd again in any case and find the lan connection or something... So with him off, Yes, it jumps to the LAN too now, to boot from HD.

Post edited by: chriswf

In my opinion in the BIOS, set HDD as first boot device.

For some reason if you need to use the other device as first boot device you can choose it manually in the start menu when you use F12 at startup.

Tags: Toshiba

Similar Questions

  • My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do?  Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

    My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do? Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

    When connected to the charger make a forced reboot: hold the home and sleep buttons, wait for the Apple logo, release the buttons. May take a few tries.

  • Satellite M100 does not START

    Good, everyone

    I have 100 M Satellite
    _when I turn it on it makes 8 signals and not booting not delivered.
    I can't boot from the BIOS RECOVERY cd too.
    It works but does not start.

    HRR, RAM, all components are ok I checked.
    WHAT signals DOES 8 mean?

    Hello

    What do you mean with 8 signals?
    Sorry, but your statement is fairly general. This type of signals that you noticed?
    Audio (beep) and visual signals (flashing LED)?

    I assume you noticed flashing signals. Am I right about that?

  • Wireless zero configuration does not start automatically. I need to run it whenever I restart the computer

    Wireless zero configuration does not start automatically.i have to start whenever I restart the computer. I have a laptop dell inspiron

    Moved from feedback

    Original title: WiFi

    Hello

    1. what version of Windows is installed on the computer?

    2. is it works much earlier?

    3 have there been recent changes made on the computer before the show?

    To activate the Configuration service automatic wireless so it starts automatically, click the Start button. Select settings , then select Control Panel.

    If you use Windows XP display, select the performance and Maintenance category, and then select Administrative Tools.

    If you use Classic view, and then select Administrative Tools. In the left pane, click the Services icon. Click the automatic Wireless Configuration icon in the right pane, and change the box Startup Type to Automatic.

    This parameter will be defined the service starts automatically at boot time. Then click on the Start button to start the Wireless Auto Configuration service zero wireless and click on the OK button.

    The automatic Wireless Configuration can also be started and stopped from a command prompt.

    To start the automatic Wireless Configuration, run the following command:

    net start wzcsvc

    To stop the automatic Wireless Configuration, run the following command:

    net stop wzcsvc

    For more information, see the link.

    Wireless Zero Configuration Reference

    Please post back with the results and we will be happy to help you further.

  • Portege M100 does not start - power light flashes orange

    Hi all

    I have a Portege M100.
    Since ysterday, the computer does not boot. When I push the power button, I hear the noise of the fan starts working, but nothing else happens. The power light continues to blink in orange.
    I removed the battery and tried to turn on the computer with the AC adapter is plugged in, but nothing changes.

    Any ideas on what could be the problem? I would appreciate help,
    Thanks in advance

    Yalin

    Hi mate,

    could possibly be the RAM, so please check the RAM modules and remove 1 module if you have 2 of them installed.
    Otherwise, I check if some another module of RAM is available and install the module of well known work. If this is not sufficient then I strongly recommend you to bring your machine to a service partner chartered for a balance of health/repair of equipment.

    Please give some information about your situation...

    P.S.: you can try to remove the battery and AC and leave the machine without power for about 24 hours. Maybe it helps?

    Welcome them

  • Re: Portege M100 - does not start, second orange flashing LED

    My trusty M100 has developed a serious boot problem. It will not run games just the bios the second (on/standby) LED flashes orange and throw the fan. The RAM and CMOS battery tested OK (of a 2nd machine). By pressing ESC, F1 or F12 just gives a beep. No way to access the Bios Setup. All thoughts

    Hey,.

    Nice work you have tested other RAM modules in your laptop Portege because that would be my first suggestion other testing modules RAM :)

    In my opinion it s a serious as the motherboard or the CPU but without diagnosis hardware malfunction special tools it of not possible to say more on this subject in particular on this virtual path. If you need to contact an authorized service provider and ask for help. The guys have good diagnostic tools and can help you get rid of this.

    If you don t know where the closest to the ASP's, take a look at the Toshiba page!

  • My firefox does not start with my multiple tabs even if I do options properly for this. Why?

    I used to open multiple tabs in firefox and set options correctly load my tabs when I open firefox again (in general - startup of firefox - tab show my windows and tabs from last time) but now when I open firefox it opens on the Firefox start page.
    now when I open several tabs and closing of firefox it does not open my tabs
    Help, please...

    I found that after Firefox v29, a LOT of my settings and modules have been changed.
    reset. Try this;
    Launch Firefox in Mode safe

    While you are in safe mode;

    Firefox Options > advanced > General.

    Find and stop using hardware acceleration.
    Check your setting. Then restart.

  • Windows XP does not start error message "Windows Boot failure. Press 'OK' to repair the startup failure.

    I have a PC running windows XP and it seems to be a virus when the computer starts and arrives at the log on screen. Once I log in, the background appears saying 'safe mode' in each corner of the black screen and an error box appears saying "failed to start Windows. Press 'OK' to repair the startup failure. Then, a diagnosis of FAKE windows disk rises and scan the computer. I really need help and all the fixes involve downloading something and I can not even access my desktop please help im not a computer genius! Also I do not know the specs of my PC because I can't go to windows to get them! :'(

    I think that the difficulty with myantispyware site is to know what type of malicious software that you have?

    I have this same problem on a friends laptop - I started out in a PE environment and run a couple of different recovery CD of AV companies but the problem remains. I also tried to go back to using System Restore, but it did not work either.

    On a work computer download SuperAntiSpyware Portable version from the link below save it on a USB key. Take the USB to the infected computer. Start the computer in safe mode with command prompt. Press Ctrl + SHIFT + ESC. The Task Manager opens. Click file > new task > type explorer.exe > press Ok. Navigate to the flash drive > right click > Explorer. Locate the SuperAntiSpyware file > right click and choose Run as administrator.

    I met recently a few new malwares of thugs that are loaded in safe mode effectively preventing you to download or install anything. For reasons unknown to me from the computer in safe mode with command prompt and then run taskmgr explorer.exe prevents malware to load. This method has worked several times for me this week only. Worth.

    Superantispy-portable    < this="" is="" a="" portable="" scanner="" that="" does="" not="" install.="" it="" can="" be="" run="" directly="" from="" the="" thumb="">

  • Windows 7 Professional does not start upward when adding a 2nd hard drive is stuck on the windows logo

    I try to add a 2nd hard disk - a disk seagate 1.5 to - win7 will not start - stuck - up when I connect the drive.

    I have another drive, a 160g WD drive - it starts ok w / that a connected.

    Why is it ok w WD drive / 160g of starter, he recognize etc ok but won't start w/1.5 tb seagate drive?

    both are sata drives - connected to the same sata port when I try of their

    Nevermind - I found it for my # model/serial

    fact firmware uupdate and still win7 crashes at startup looks like I got a new seagate brick.

    As it is a new drive and is under warranty, contact Seagate for replacement.  Any company can send a piece of equipment DOA.
  • My CD/DVD drive does not read and is therefore no longer is visible on my computer, the BIOS or Device Manager.

    I just realized when inserting a CD, he has not read. I havn't he used in awhile, so it can't just happen. When I insert the CD you can hear it spin and green light flashes, but after about 10-15 seconds it stops and the light goes out. Under 'My Computer', I see more player. I don't see the driver CD/DVD option in my Device Manager menu longer, and I do not see it in the BIOS. I have a HP Pavilion Labtop.

    Any ideas? Thank you!!

    Hello

    Check with HP, their drivers support and documentation online and ask in the forums of HP for known issues.

    Support HP & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    Since it is not recognized in the BIOS, which means that the reader could have failed, there is a possible cable or
    problem of controller or other hardware problems.

    ===================================

    If you can get it to be recognized in the BIOS and it still doesn't work, maybe these will help.

    You might have a disk problem as the CD/DVD is actually 4 discs in 1 case (CD & DVD and CD burn and)
    DVD playback). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
    that the troubleshooter does not, and those who "could" be the cause.

    Check with your system manufacturer Maker and device for possible firmware updates and the good
    Your player registry entries.

    Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
    other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
    a person with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    I hope this helps. Rob Brown - Microsoft MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Satellite M100 does not start after upgrading memory

    I recently bought two sticks of DDR2 1 GB 533 Mhz RAM memory.
    I placed both in the slots (the one under the keyboard and one at the rear).

    For some reason any when I try to turn the computer back on to, nothing happens.
    The screen is black and nothing seems to load.

    Help please!

    The case is clear like a Crystal;

    The M100 cannot start because memory modules are not fully consistent or both modules or only a single module is defective.

    I put t see any other solution to test for laptop with other modules

  • XP does not start, get blue error screen, even in safe mode

    My PC with Windows XP worked but slowly. I have deleted some entries in the registry. I was unable to close the session. I rebooted and now even after using safe mode I end up with a blue screen with Windows XP on it and no button works! Any suggestions?

    Looks like you did some significant damage there.

    What is the brand and model of your PC? You have a Windows XP installation CD?

  • I am a student, I have a submarine which must be renewed each year through my free school. I downloaded it again this year and he says start your 30 day trial, even though it says I have the 1 year sub in my adobe account.

    It's the same thing last year when I did and I had to spend hours with tech support to fix it. IM so frustrated with CC now. Help, please. I have a Mac, the latest operating system running.

    Please see the procedure here: FAQ: what should I do if I have a subscription, but my application acts as if I had a trial?

  • SSD external via USB does not start by default

    Hello Apple community.

    I have a problem with my new external SSD. Given that the base model Mac Mini end of 2014 comes with a disk HARD 5400 RPM drive, I wanted to go to an SSD without having to tear the whole unit. I wanted to exhaust the option 'boot from USB' and I'm having a strange problem. I cloned my Mac to the new drive SSD and slapped in a box set of the speaker. I connected via USB and changed my 'startup disk' to use the external SSD drive. However, it does not start on this unit automatically. When I reboot and discovers the "boot manager" I see the USB being initialized automatically. After disconnection / re - plug the drive in, it appears as a boot option. Once it is initialized, everything works fine and I can boot into El Capitan without any problem using the SSD.

    I am trying to find a way that I can get the Mac to initialize the SSD to the boot upward and choose default. I don't want to have to re - connect the drive whenever I want to start on the SSD drive... Any help and suggestions are greatly appreciated!

    My equipment

    ===========================

    Model Base of Mac Mini (end of 2014)

    1.4 GHz Intel Core i5

    4 GB of DDR3 1600 Mhz

    OS X - El Capitan v 10.11.3

    240 GB SanDisk SSD more - connected via USB3.0

    What unit do you use for the SSD?

    Can you provide a link?

    If the SSD is delivered with a box to provide a link to that,

    How do clone you for the SSD? What app did you use?

    -Try to reset memory NVRAM/PRAM and SMC

    MacIntel: Reset of the controller (SMC) system management

    Subject of memory NVRAM and PRAM

    -Try to start safe mode

    OS x: what is Safe Boot, Safe Mode?

    -Start to recovery and repair the startup disk

    OS X: on OS X Recovery - Apple Support

    -If it is repairable, reinstall the OSX. Nothing shall be lost

    How to reinstall OS X on your Mac - Apple Support

    -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

    Format the boot disk and then do a fresh install of Mac OS x

  • TC - 705 crashed. does not start. error message

    My sucks TC-705 crashed.  It does not start.  error message saying lack driver DVD player.  At the beginning I was not too worried because my recovery is on a USB key.  He went through the installation process, but the re-boot did it again.  Endless loop.  I tried all repair options without success.  I went to the command prompt and run the scan and repair.  Scanned very well, she could not make the repairs.  If nothing worked the hard drive may be damaged, said a source online.  I put a new disc in, but there was no improvement.

    Where should I go from here?

    Ironfly,

    I downloaded vanilla but after I extracted it I could not make heads or tails of it.  The Readme went on and on the forums running with it but not said me something about how to launch it.  I have a question on how to launch online, but the first statement, I had was to open my WOW file.  I knew then that I had wandered in some elses universe.  After reading more later, I realized that he was playing.

    All of this is moot right now because my DVD drive and all my usb ports are dead.  There is nowhere where ever I go except in the bios.

    At this point, I don't think that there is nothing I can do.  The computer is still under warranty and I have a one year protection plan so I'll let Newegg and Acer deal with reclamation.

    I wish I could give you a hundred Bravo for all your efforts.  Thank you and all those who participated.

    unktim

Maybe you are looking for