PROTECTED Z830 not charging

I bought Toshiba protégé Z830 four years ago and the love of the computer. He stopped to load or cool mood sometimes. The power supply (adapter) has been checked and found to function properly. The computer does not work on sector or it sys, the battery is low. Any suggestions, what check is needed before buying a new battery.

The battery is more than 3 years, time for a new battery.

Tags: Toshiba

Similar Questions

  • Re: Error with driver Bluetooth Stack on protected Z830

    Error during installation of the Bluetooth stack for Windows 7 (version of 15/05/12): first pilot "Bluetooth USB controller-10" properly installed but the second a "Bluetooth RFBUS" fails.

    Therefore Bluetooth does not work. PC says that it is not enabled (with Fn + F8 or Bluetooth setting running)

    Note: the Atheros driver is up-to-date. I tried with and without the Bluetooth Driver filter Pack 1.0.9.

    What should I do?

    Thank you!

    PS: Protected Z830 PT224E with 64-bit windows 7

    Are you using the original preinstalled OS Hat you got with your Portege?

  • Sansa Clip Zip battery does not charge, goes directly to the screen of the song

    It's my third Sansa MP3 players.  The first was a Sansa Fuze with the round button.  Like that one but my husband needed more that I did it I gave it to him.  He is old, but the player is still so today.

    The second was a Sansa Fuze + with the touchpad.  The touchpad has been way too sensitive but I need to play only two songs for sleep therapy while I was fine with it until the battery suddenly stopped charging a few months ago, I posted my problems in the Sansa Fuze + forum.  After trying a few suggestions, I finally accepted that he was a Goner.

    I bought this Sansa Clip Zip 4 G, thinking that should last at least for a while because I use every day.  In fact, I needed only when I had disorders of sleep during the night;  I probably used it once every two weeks or more.  I used my cell phone to the device, had no problems until now.

    The last time that I loaded it was 2 weeks, to 98% full - the thing never indicated 100% while it was a little weird.  In any case, I had problems sleeping two nights ago so I took out the Clip Zip and noticed that the battery still had plenty of juice left.  This morning I checked the battery, he had 68%, but I thought I needed could again tonight so better it load up, just in case where.

    I connected it to my computer, but it did not show "connected" screen  Instead, he went straight to the last song I listened to.  I thought it was weird so I turned off the player then tried again.  Of course, he went directly to the screen of the song.  I noticed that the battery icon was showing 'filler '.  I thought that if I left it connected to the pc long enough IT would eventually deducted.  Two hours later, I checked the computer and it says that the drive battery was dangerously low.  I disconnected and then reconnected and this time he said 98% charged.  I loaded a bit more just in case so I used the player for about 15 minutes and the player turns off.  Plugged into the pc and now it says battery is extremely low, while the last hours do not charge the battery, but it drains pretty!

    My last attempt was to plug into a wall charger and guess what?  He went directly to the screen of the song once again.  Contrary to connect to the computer, I could actually turn off the player but this way does not charge the battery, or.   It's exactly the same problem as my second player, the Sansa Fuze +.

    I bought the last two players from Sansa, simply because I really liked the first which of course had been abandoned a long time ago.  I don't know if I have bad luck or it is just an issue joint Sansa players but one way or the other I don't buy any Sansa more in the future.  He is a big name that comes with the big disappointment!

    You can also try a reset by pressing and hold the power button for 20-30 seconds. Release it and then turn it on normally and see how it behaves.

    By your description of the message "dangerously low" you get then plug it into your computer, which tells me that you use MTP mode on the player (or default automatic default, MTP). MTP mode can be pretty weird; better to use MSC mode unless you have need to PSG for "protected" content or DRM files such as Rhapsody or audio in your library or Audible books. The small "crirically" message is a bug in Windows 7 (using MTP mode) that Microsoft did not consider important enough to fix.

  • iPad Pro does not charge

    My iPad Pro (10.0.2) says not charging when connected to the nearest 4th USB port of lightning on my iMac OSX end 2015 10.11.6. Another thing that I connect it works so there is nothing wrong with this port.

    However, my iPad charges when it is connected to the other 3 USB ports. Tried other Apple cables, restarted my iMac and reset my iPad.

    Basically, it's not the iPad, and it's not USB port cuz that they both work when plugged in with something else. It's just the 2 at the same time with the other who do not work.

    I'm so confused. Does anyone else have this problem?

    Hello. It seems that the charge voltage/current monitoring software has been changed in iOS 10. It is much more sensitive. Your device's charge when says "do not load", but he is in charge, probably faster when it shows the Flash. See the iPad is cool the computer after an upgrade to iOS 10 batches of a discussion of this issue.

  • Started at Mo and not charging with the charger connected. Charger works. Keyboard not workin except power button / stop. Restarted using ex in car without success. SW

    Started MacBook and not charging with the charger connected. Charger works. Keyboard does not not except the power button / stop. Restarted ex drive no available help hoping that it was a matter of SW. SW and the operating system works very well. Read some info online. Tried to reset the SMC. Now, the MacBook does not start. Can U help me please. Thanks in advance.

    MacBook, 2010, Mac OS X 10.6.8

    Hi Veronica Steward,.

    I understand that you have turned into a series of questions about your MacBook and want help getting the computer to turn on. Here is an article that can help you through the steps to fix this problem:

    If your Mac will not turn on - Apple Support

    Let us know how it goes and thanks for coming to Apple Support communities.

    See you soon.

  • Does not charge

    Hi all.

    I have a question - my iPad 2 Air will not charge when connected to my computer (didn't load in the upper right corner).

    Using cable that the iPad is connected to the computer, disconnect the computer and the plug in the wall socket and it will load.

    I plugged my iPhone 5 on the computer and it will charge - the same thing with my iPod.

    Anyone have any suggestions on how to solve this problem.

    Hello

    I use app loader on the computer AI to charge my iPad

    http://www.applestan.com/wp-content/uploads/2012/08/AiCharger_V10006_XpVistaWin7-2.zip

    First reboot your iPad and then connect it to your computer, at the beginning it says "do not load", but then it starts to load.

    Hope this works,

  • Battery not charging question

    Hello support,

    I'm on MacBook Pro (13-inch, mid-2012) running El Capitan and I was happy with the battery, the life he gives about 4 hours and you just have to go with, but unfortunately the battery does not charge after life cycle number is reached according to programmed by chip on board and asked for replacing the battery PLEASE provide an update to the battery issue and let the user decide When to replace them, but not the application of it to replace now, this could be resolved if you kindly make the point "the MacBook Pro SMC Firmware Update 1.8" for work on El Capitan.

    Thank you for your understanding

    FWIW, Apple isn't here. This is a user forum. You can send feedback to Apple to...

    http://www.Apple.com/feedback/

  • updated to iOS 10, phone not charging properly

    Hello. Updated this morning at 10 (6 s) and the phone went nuts. Drowned the battery at 21% in 3 hours and, subsequently, he didn't start charging. Now, I have the same problem, is plugged into the socket and nothing. It shows that he is in charge, but it is not. Had to plug it back so he can start loading. Cable and adapter are Apple. Thank you.

    Hi Vikingul!

    I see that you are having problems with your iPhone 6s does not charge.  It is essential that you are able to charge the iPhone, so I'm happy to offer assistance.  Please try all the tips in this article to support:

    If your iPhone, iPad or iPod touch will not charge

    Thank you for using communities of Apple Support.

    See you soon!

  • Not charging with cell phones but computers to load adapter

    Hello

    I have iPhone 6 more.  I am having some problems. My phone will not charge with laptops, computers desktop or Mac Book. But she sees a power adapter. I tested with another official cable and also does not work. I tunes sync also does not work.

    Please help me solve this problem.

    Thank you

    Hello Win Htut Aung,

    I understand that you have had problems of load on several different computers and I want to help you get the issue resolved and isolated. Just for you help determine the cause could you let us know if your devices are still perceived by your computers, USB devices or iTunes?

    If not you can try the steps outlined in this article: If iTunes does not your iPad, iPhone or iPod

    If the problem persists, let us know. The entire community is here to help.
    Best regards

  • My pencil to the iPad will not charge.  What should I do?

    My pencil iPad suddenly stopped charging.  The connector of the lightning and the wall adapter successfully charge my iPad and my iPhone 6 but will not charge my pencil.  The green light on the pencil map is no longer lights up.  The pencil is about 7-8 months.

    Hello

    Check the ports on the adapter load load pencil Apple for debris.

    Also try to load your Apple pencil by plugging in the connector of the lightning on your iPad Pro. If the battery is exhausted, a second charge of 15 should provide 30 minutes of use.

    If the problem persists, contact Apple support (mail service may be available) or make a Genius Bar reservation in order to your Apple pencil and accessories checked power warranty:

  • Do not charge the MacBook Air battery

    My macbok Air shows the power is plugged in, but the battery is not charging. The battery status is normal. The adapter led is orange.  I have reset the smc, but it has not changed anything Suggestions?   I thought a new battery and power cord would solve the problem but it doesn't.  Thank you

    Reset the SMC could solve the problem.

    Reset the management system (SCM) controller on your Mac - Apple Support

  • MacBook Pro (2014) does not charge despite an orange light when plugged

    Hello

    So my 2 year old Macbook Pro (retina) does not load when it is plugged in - spite, projecting the orange light. I have a battery (20%) and it is reduced whenever I use it and will be soon drained.

    Some of the things I've tried

    -Reset SMC - tried but no change after

    -When I use the mac when it is plugged in the battery icon in the top bar done see the support - but there is no increase in % of the battery. Continuous use it starts to fall.

    -During use (and what battery is plugged) - I checked the report system (about this Mac section) - in the energy sector - it is said does not charge (despite being connected, the orange light and the symbol in the top bar)

    What do you think guys that it is? MLB? Battery?

    What I have to replace or can it be fixed?

    If you have the Apple store, take the machine evaluation.  There is no charge for this, but you need an appointment.   The first thing I would check would be the cable.  You have another machine to test this with.

  • When Firefox restarts the pages that they do not charge just display story, I then have to refresh to get new data as Explorer always charging and Firefox used to

    This should be an easy solution, because all the other browsers and Firefox used to do this. Firefox is restarted the pages do not charge they just historical display. I have to hit the button reload current page to get new data. This has been driving me crazy for a few weeks. I thought I had fixed a couple of times but only a few pages loaded and now it's the whole story again.

    Joe

    Oh, you use the Session Manager. What happens if you check the box in the Session Manager options, to the title of the backup & restore, "Reload All restored Windows"?

  • 6 iPhone is not charging when pluged

    Hello

    My iphone 6 won't charge when plugged, I tried several Chargers and power outlets but it does not load. However it does not charge when I connect it to my computer. Anyone know how I can fix this problem?

    Any help appreciated, thanks.

    Get the phone by Apple or an Apple authorized service provider, this problem could be linked to the docking port.

    Launch a service request

    Find an Apple authorized service provider

    Make an appointment at the Apple Store

  • iPhone 5 c will not charge via USB on the laptop?

    Hi all.

    I have an iPhone 5 c and as about a week ago, does not charge via the USB port on my laptop. He sees very well in my wall sockets and Sockets USB as well, but not in my laptop. I have an Acer laptop running Windows 7. Windows is up to date, iTunes has the latest version installed. Whenever I plug in my phone, one of the following conditions occurs:

    (1) does not have

    (2) noise "plugged" USB lights, the window on the lower right, tell that a USB device has malfunctioned

    (3) (rarely) of phone calls after I tried several things

    What happened is I would plug my phone, she would charge via USB, iTunes opens automatically, and "trust to this computer" popup would come on my phone if I had unlocked it. None of this is happening now. I did the following to try to remedy:

    (1) power cord iPhone replaced (it was time for a new anyway)

    (2) uninstalled and reinstalled iTunes

    (3) restart computer and phone probably 29856 times

    (4) device Manager... nothing comes up at all, not even the unknown device. RARELY the unknown device comes up, then I get a "Code 10: this device cannot start" error, but it is * in a handbasket just trying to get to THIS point! and IF I do what they say to do to correct a code 10 (uninstall all USB and restart the computer, then USB devices hook to the top one at a time), so I'm now at my problem of a communication that don't meet pluse between my phone and PC

    5) tried to the registry editor, but not "upper filters" option rises

    (6) virtually every other option on this thread of 5 pages iphone not recognized by Windows 7

    Help, please?

    The USB port of your laptop does not provide sufficient power to recharge the phone. It is a hardware problem with your laptop, not the phone.

Maybe you are looking for

  • Satellite A500 microphone problem

    I currently own a Toshiba Satellite A500 computer series running Windows 7 laptop, however the built-in microphone that comes with the computer laptop isn't working properly.When I go to use Skype for example it says that the microphone is on, but th

  • Releases of the same main battery is plugged in Satellite L series

    Hello I hope someone out there can help you. I have a problem with my laptop, even when it is plugged to the mains, the battery symbol appears and starts to run down. It happens intermittently and sometimes it's good, but then all of a sudden it show

  • Background color in Photos with El Capitan app

    I'm not positive, has nothing to do with El Capitan, but it was only after the update to El Capitan I noticed. The question is - in the Photos, when I used to enlarge photos or switch mode full screen, the background behind the photo color was black.

  • HL-DT-ST DVDRAM GSA - T10N ATA not working

    HL-DT-ST DVDRAM GSA - T10N ATA Windows cannot load the driver for this hardware device. The driver can be corupt or missing (Code39). When I check for solutions Windows says that the driver works fine and up to date. How can I get that back?

  • When adding port local printer 'access denied '.

    I have a home network with 5 computers. All share the same working group. All the impressions of a Canon MP500 attached to Vista64 host area. Defined as a private network with print sharing wide open. My XP system is able to connect and print as a pr