Protocol (NTP) network time

Whenever my computer restarts, the computer's clock going on at another time. Most of the mornings I resynchronize the time on the computer. Manual synchronization works very well but is annoying.  It happened for about 6 months and my internet provider is comcast.  Any thoughts on what is the problem?

Thank you mjf5618

Hello

I ask you to check the time set in the BIOS settings. Also check if the CMOS battery is drained. You can contact the manufacturer of the computer for these settings.

Warning of the BIOS:
BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved.
Changes to settings are at your own risk.

I hope this helps.

Thank you, and in what concerns:
Shekhar S - Microsoft technical support.

Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Tags: Windows

Similar Questions

  • I am looking for program by using Network Time Protocol of the Dave Mill. Where can I get help with this?

    original title: the help of time Windows

    I am interested in possibly edition. certainly the configuration, compile and test an implementation of the Dave Mill Protocol NTP (Network Time) on Windows XP Pro.  The tricky part so far implements strong, yet easy to use authentication.  We use version open source secure sockets layer.  I'm not a developer kernel or the Windows service, but I have experience of writing kernel drivers PCI for time servers dedicated which sync directly to a scale of coordinated universal time.  Whoever did this, or they could point me in the right direction?  (I am familiar with ntp.org, openssl.net, USENET newsgroups and the other usual suspects).  Help for network time, W32Time, stuff crypto or "timing" system on the line of Windows free software would be highly appreciated.

    Kind regards

    Dave Johns

    Hi Dave,.

    Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited to the audience of developers on MSDN. Please post your question in the following forum:

    http://social.msdn.Microsoft.com/forums/en-us/categories

    I hope this helps.

  • tests of the device for the time of the ASM and Network Protocol (NTP)

    Hi all.
    I try to install Infratruction grid Oracle 11 g R2 amd oracle Linux OS but
    I got the following error.

    tests of the device for the time of the ASM and Network Protocol (NTP)
    can someone guide me what should I do for them?

    in RAC 11 GR 2, the option to synchronize the time between the nodes are ntp or ctss.

    If you want to use ntp add the - x option in/etc/sysconfig/ntpd (for example OPTIONS = "-u ntp:ntp Pei /var/run/ntpd.pid x")

    Hope this helps

  • I try to connect my apple TV.  I've been up to signature in ITunes but got the message that the connection failed because the network time has not been set.  I don't know what I should do.  Thanks in advance.

    I try to connect my apple TV.  I've been up to signature in ITunes but got the message that the connection failed because the network time has not been set.  I don't know what I should do.  Thanks in advance.

    Date and me are dealt with by the network. Try restarting your router/modem...

    Verify that DNS is set to auto

    Make sure port 123 is open on the router (refer to the manual of the router to you)

  • Change password for Network Time Machine

    Hello.

    I used a time Machine to backup since 2010.  Recently, I changed the home network password Wifii.  The time Machine is more access to the network, and I do not know how to change its parameters, so it can re - connect on the same network.  When you open AirPort Utility, I can't click on the time Machine, it says "Device not found" and only offers me the option "Forget this device".  I must forget this device to start the process?

    I work on a MacBook Pro, OS 10.11.6 (El Capitan).

    Would appreciate your help.

    Tim

    Your best bet would be to connect a computer with AirPort Utility is installed via a cable ethernet to the time Capsule. This allows to connect back to the time Capsule to update your new password Wi - Fi settings.

  • Unable to connect to the Network Time Capsule wireless

    I just changed ISP (AT & T to Time Warner) and I use my own modem cable (Arris SB6141). I connected by TC via the WAN and knitting laptop via the connection to the local network, but now only my MacBook Air (El Capitan running) connects to the wifi network of TC. Nothing else connects; AppleTV (w/Siri), iPhone 6s (9.3.1). Is there a compatibility issue that could be the cause of the problem between the modem and the TC? Or is there something I'm supposed to change with the settings? It worked fine when I was using a router 2WIRE AT & T U-Verse.

    Looks like the router Mode of the time Capsule airport is set to Off (Bridge Mode)... (which would have been correct for use with a 2Wire product)... but, it must be set to DHCP and NAT to use with a simple modem.

    Turn off the modem for at least 20 minutes... more won't hurt

    Turning off time Capsule

    Make sure the Ethernet cable from the modem connects to the "O" on the Time Capsule WAN port

    After the 20 + minute modem switch off period has finished, turn on the modem and let it run for 10 minutes

    Then, turn the time Capsule and let it run for 5 minutes

    On your MacBook Air...

    Open AirPort Utility... (Finder > Applications > utilities > AirPort Utility)

    Click on the image of the time Capsule

    Click on edit in the window that appears

    Click on the network at the top of the next window tab

    Make sure that the setting of router Mode = DHCP and NAT

    Click Update at the bottom right of the window and give the time Capsule a minute full to restart

    Recheck the network and report on your results

    Unfortunately, the SB6141 and Apple routers not always who hear well together, so keep an eye on the issues

  • Network times out when the iPhone update

    When I try to update my Iphone it says network connection has expired, how to fix this.

    Program network networking Internet website website URL website network

    Hello

    1. which version of the operating system you are using on the computer?
    2. do you have firewalls and antivirus software running at the time of the update?


    You can disable the installed antivirus software and then try to update.
    For windows 7: http://windows.microsoft.com/en-US/windows7/Disable-antivirus-software
    For windows vista: http://windows.microsoft.com/en-US/windows-vista/Disable-antivirus-software
    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

    You can also contact the support apple iphone for better assistance forum.
    https://discussions.Apple.com/community/iPhone
  • Why my network time-out when you try to download the update for ipod?

    I keep trying to download Ipod software version 5.0.1 which takes about 2 hours, but after an hour or two, says network error message has expired. I checked all the settings that I found but nothing helped.

    Hello

    I removed the suggestion of Brian Tillman on the accounting in the Forum Feedback since I went ahead and moved this thread in a forum more appropriate responses.

    However, I still agree with his second suggestion to ask in the forums of Apple. As you mention that this problem occurs by updating your iPod, I think there must be a problem with her or with iTunes which is at the origin of the network to time out.

  • Ability of blackBerry Smartphones to synchronize the network time has been lost

    Hello world

    Until very recently, I had the possibility to synchronize the time with the BlackBerry network and the mobile network (3 Australia). Both worked fine as I Express put an incorrect time, and then synced with both of them.

    This now seems to have stopped as his network saying time is not available.

    I tried turn this option off and turned on, tried a battery pull, searched everywhere I see etc.

    Is there anything else that could affect the ability to synchronize the time with the network

    Thank you

    Paul

    Interesting. I went just manually the phone 2 g (because I was doing a long call in a 3G area low and I didn't want to cut out), and when I turned it to 3G and 2G was back at the time of the network.

    Paul

  • How to identify the Protocol of network storage using PowerCli

    Hi all

    Does anyone know how to identify the network storage protocol using Powercli? If you do could you please point me in the right direction and appropriate controls to be used.

    Thank you.

    See you soon

    With the Get-EsxCli cmdlet, you get to many of the features esxcli.

    Something like that

    $esxcli = Get-EsxCli -VMHost MyEsx$esxcli.storage.core.path.list()
    

    You can use Select-Object to choose the specific properties of the returned objects.

    For example

    $esxcli = Get-EsxCli -VMHost MyEsx$esxcli.storage.core.path.list() | Select RuntimeName,Transport
    
  • network time consuming to connect since the installation of readycache

    Hi guys

    Although my readycache works great and theres no problem, the network takes longer than usual to connect, so much and so well I start now 'steam' client manually

    is there a way to get the network connected before caching software... or is this a known problem...

    This isn't a question of bad because it connects after 45 seconds, but it would be good if theres a solution or a fix for this

    Thanks a lot guys!

    I'm not an expert, ReadyCache, but:

    In general, you want to implement caching as soon as possible in the boot cache process all possible startup hard disk reads.

    So, it could help Sandisk work on this, namely:

    your version of Windows

    configuration of your disk (I assume that you are starting and all loading from a Windows partition active)

    any other network management software, such as management software router, which

    your security software

    all that when you start, look at / works with your network connection.

    I have a funny feeling that it is something that would be more easily fixed at the end of steam.  Your steam load after start up is probably the best solution.

  • Network TIME limit

    Hello

    We are short of 1.5 VCDirector.

    We want to limit our clients in the creation of networks of vApp (and possibly in the creation of vApp too). Is there a function that we could use when creating the org (1 customer = 1 org, and the customer is the administrator of his org) to achieve this goal?

    Thank you

    Kind regards

    Raffaello

    Here, found the solution - such a limit should be set at the level of vDC, not only at the level of the Org.
    Thank you IamTHEvilONE, you put me in the right direction.

    See you soon

    RAF

  • BlackBerry Smartphones Priv charging protocol - at any time less than 100%?

    Hard to keep up with all this new technology, but don't harm the Priv battery life or the ability to hold a charge if I continue to load when it is less than 100% - say 50% or 60% (instead of complete emptying) and then unplug when 100%?

    My battery has currently autonomy - easily all day with systematic emails, occasional internet with videos associated with Twitter or the Internet.  However, I want to make sure that the battery life and the ability to hold a charge remains strong - as much as we can't easily exchange to watch the Z10.

    Thank you

    more than enough information here on batteries

    http://supportforums.BlackBerry.com/T5/BlackBerry-PlayBook/lithium-battery-myths-dispelled/m-p/10435...

  • 11.2.0.3 grid Installation fails during verification of the NTP

    I want to install Oracle on RedHat 5.5 11.2.0.3
    My Installation seems to be failing when the next NTP check. However, each host in the cluster run NTP with x - option (for orientation of time).
    ntpd - x u ntp:ntp Pei /var/run/ntpd.pid


    INFO: *********************************************
    NEWS: Protocol NTP (Network Time): this task checks the synchronization schedule cluster on clusters that use the Protocol NTP (Network Time).
    INFO: Severity: CRITICAL
    INFO: OverallStatus:VERIFICATION_FAILED
    INFO: -----------------------------------------------

    I crossed the /etc/ntp.conf and etc/init.d/ntpd, and they are the same on all nodes of the cluster. I don't know what I'm missing here.
    Any help would be appreciated.

    Thank you

    Hello

    right 11 GR 2 requires no ntp server (although always recommended).

    Unfortunately the check-in facility, do not see if NTP is running, but will also look for/etc/ntp.conf. So in addition to kill and by disabling the ntp, you must rename/etc/ntpd.conf.

    Sebastian

  • Cluster verification utility Oracle failed with the INS-20802 then install 12.1.0.2 on Oracle Linux 7.1 x 64

    Hello!

    You want to install Oracle Clusterware 12.1.0.2 on Oracle linux 7.1 x 64. When installing, everything was fine, except the last step - utility of Cluster Oracle verification failed with the INS 20802.

    In the log file, I found:

    INFO: From audits to clock using Network Time Protocol (NTP) synchronization...

    INFO: NTP configuration file "/ etc/ntp.conf ' verification of the past existence

    INFO: PRVF-7590: 'ntpd' is not running on the node "pdc-sap-ascs1.

    INFO: PRVF-7590: 'ntpd' is not running on the node "pdc-sap-ascs0.

    INFO: GLWB-1024: the demon NTP or Service didn't work on one of the nodes in the cluster.

    INFO: PRVF-5415: check to see if the NTP daemon or service runs failed

    NEWS: Control of synchronization using network time Protocol (NTP) failed

    INFO: PRVF-9652: Cluster Time Synchronization Services check failed

    also in xml file like:

    < ELEMENT > Network Time Protocol (NTP) < / ITEM >

    < DESC > this task checks the synchronization schedule cluster on clusters that use the Protocol NTP (Network Time). < / DESC >

    < MORE_DETAILS > < / MORE_DETAILS >

    < SUCC_NODES > < / SUCC_NODES >

    < FAILED_NODES >

    < NODE ID = 'pdc-sap-ascs1' > < / NŒUD >

    < NODE ID = 'pdc-sap-ascs0' > < / NŒUD >

    < / FAILED_NODES >

    < GLOBAL_ERROR_DESC_LIST >

    < ERROR_DESC >

    < MSG_TXT > PRVF-5507: NTP daemon or service is not running on any node, but the NTP configuration file exists on the following nodes:

    PDC-sap-ascs1, pdc-sap-ascs0< / MSG_TXT >

    < CASE > the configuration file has been found at a node if no NTP daemon or service was running. < / CAUSE >

    < ACTION > if you plan to use CTSS for time synchronization, then NTP configuration must be uninstalled on all nodes of the cluster. < / ACTION >

    < / ERROR_DESC >

    But of all the nodes ntpd is running:

    [root @pdc-sap-ascs0 ~] # ps ax | grep ntpd

    2214 s + 0 pts/0:00 grep - color = auto ntpd

    19438?        SS 0:05 / usr/sbin/ntpd u ntp:ntp g - x

    [root @pdc-sap-ascs1 ~] # ps ax | grep ntpd

    11492 pts/0 s + 0:00 grep - color = auto ntpd

    19090?        SS 0:05 / usr/sbin/ntpd u ntp:ntp g - x

    So, why postinstall auditor has not found of ntpd running?

    This situation was prior to installation, I started, but this time I ignored the warning.

    Thank you very much for your answers!

    The problem is that in both servers, I want to use ntp, and I wrote in the configuration on both servers,

    Server ntp.myorg.local iburst

    but we use two IPs for ntp, both resolved through dns servers, so in my case the first server got a single for the ntp server ip address and then got another ip. It was a problem and check postinstall determine that the servers use different time sources and do not like this situation.

    Once I changed ntpd config to use ips, check postinstall succeeded.

Maybe you are looking for