Protocols of IP v4 & v6 missing on Win7 install
I built a new system and installed Win7 Pro drive with authentication # (purchased from Amazon). When I look at my wireless connection, all protocols are there except IP v4 and v6. When I click to install it and it asks you a disc, I ask him to check the installation disc (drive D :) and she says nothing he is a pilot.) Where can I download the protocols?
Confirm that ipv4 and ipv6 are also properties of your Ethernet card.
Assuming that these protocols are absent as well as your adapter wireless, start by opening a ("run as administrator) command prompt and typing
sfc/scannow
If that doesn't fix things, see--> http://www.blog.creativform.com/en/no-internet-protocol-version-4-tcpipv4-in-ethernet-properties/
If none of these solutions work, you should probably do a repair installation.
http://www.SevenForums.com/tutorials/3413-repair-install.html
Tags: Windows
Similar Questions
-
Computer can't find D: / /, load win7 install disk, but he finds no problem
TuneUp utilities reports
Statements from Windows that device "TSSTcorp CD/DVGW SH-S182F ATA Device" does not work properly.Device Manager reports
Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)Windows Update driver reports
Windows has determined the driver for your device is up-to-dateDownloaded 3 replacing driver software, none of them reports a problem with the driver
Thought I could reinstall win7 but if it does not reinstall the driver faulty, I won't be able to install the player software
All help get will be appreciated
Why would install you software on your D drive or partition?
Any program .exe must be installed where the operating system is which is the conventional way and supported way :)
Personal folders may be located on other partitions, but programs are better installed where the operating system.
-
Why used win7 install motorola peripheral PSG to interface
Why used win7 install MTP ive installed motorola mobile Motorola phone drivers device interface but victory moved the interface of the MTP driver
Hello
Check out the link and follow the steps.
http://www.Motorola.com/consumers/v/index.jsp?vgnextoid=bda09ec8009a0210VgnVCM1000008806b00aRCRD
You can also try by selecting the device failed in Device Manager and manually install the driver by selecting the device as a storage device USB mass and not to the default instrument of PSG.
-
Script - missing and hotfixes installed for ESX and ESXi
Can I have the script i.e. missing and hotfixes installed for ESX and ESXi using the CLI power only? out put should be csv format
You reset the content of the table $Results on each iteration of the baseline.
Try like this
$Results = @() foreach($esx in Get-VMHost) { foreach($baseline in (Get-Compliance -Entity $esx -Detailed | where {$_.Status -eq "NotCompliant"})){ $Results += $baseline.CompliantPatches | Select @{N="Host";E={$esx.Name}}, @{N="Status";E={"Compliant"}}, @{N="Baseline";E={$baseline.Baseline.Name}},Name,ReleaseDate,IdByVendor, @{N="KB";E={(Select-String "(?
http://[\w|\.|/]*\w{1})" -InputObject $_.Description).Matches[0].Groups['url'].Value}} $Results += $baseline.NotCompliantPatches | Select @{N="Host";E={$esx.Name}}, @{N="Status";E={"NotCompliant"}}, @{N="Baseline";E={$baseline.Baseline.Name}},Name,ReleaseDate,IdByVendor, @{N="KB";E={(Select-String "(? http://[\w|\.|/]*\w{1})" -InputObject $_.Description).Matches[0].Groups['url'].Value}} } } $Results It will give the installed and lack of patches which are defined in the non-compliant baslines related to the ESXi host.
If you want to see all the lines, also the most consistent, omit the Where clause on the base line (foreach) loop.
-
I want to start by saying: I went through several forum threads about errors in Protocol TNS, .ora files, installation guides and you name it. I am new to Oracle 11 g, and I bought the book for a course of database, I don't take in college; However, I'm not a newbie to technology and I have SQL experience. My Oracle experience has been a disaster so far, and I am a tester of application by trade! I spent an entire week, just try to get the software installed correctly before finally creating this discussion on your forums. So I'm sorry to disrupt your forums. I know that you have 1,000 other subjects with a similar scope, but I have received no help from Oracle and none of the proposed solutions have previously solved my problem. Let's get to it.
My system: 6 core AMD, Windows 7 Ultimate SP1, 16 GB RAM, multiple disk drives, if you need anything else to say.
I am trying to install software: Oracle 11 g SQL Database Standard Edition (it came with my book SQL Oracle 11 g and I need company for the moment)
Environment: Windows 2008 Server Virtual Datacenter
Client VM: VMWare
Problem in short: when I try to install the software and create a database, everything is successful, until the database Configuration Wizard attempts to finalize the process. All the prereq check Oracle directories are created and etc. To the database Configuration Wizard, I always get the following error message:
ORA-12560: TNS:protocol adapter error
If I try to launch sqlplus and enter my credentials of the default Oracle, I get the same error (I am basically unable to get to the SQL > screen). I noticed that I only have a sqlnet.ora file in my folder "OraHome_1/NETWORK/ADMIN", and I have not all listeners or tnsnames file in this directory. The sqlnet.ora file reads as follows:
sqlnet.ora # Network Configuration file: C:\app\Administrator\product\11.1.0\db_1\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.# This file is actually generated by netca. But if customers can opt for
# install 'Software Only', this file does not exist and without the native
authentication #, they will not be able to connect to the database on NT.SQLNET. AUTHENTICATION_SERVICES = (NTS)
NAMES. DIRECTORY_PATH = (TNSNAMES, EZCONNECT)
I look at my running services and find that I 3 running Oracle services (at this point, I tried to uninstall/reinstall several times, none seems to be a COMPLETE uninstall, while some of these services were not there before...):
Oracle ORCL VSS Writer Service (started)
(Disabled) OracleJobSchedulerORCL # I will revive it with no other success
OracleOraDb11g_home1TNSListener (on the way)
I tried to launch another listener using the following cmd command, but I still received the TNS error trying to create a database or connect to sqlplus.
lsnrctl start LISTENER
I admit, I am quite sleepy at this point, and I'm not figure this tonight. I'm not having my hand held through the process, but I could really use some help here. I understand that my VM disk drive is probably fragmented at this point and I'll probably need to start over from a clean installation of OUR. I also understand that I keep missing a crucial procedure during initial installation because it is quite obvious that this will not work without the listener or tnsname files. I tried to interpret the samlples, but an example of the syntax would be really useful. Also, what users to manually configure these standard files? It seems that a lot of my trouble could have been avoided if the installation had been easier. On the contrary, the flame of the fact that I'm more efficient with Microsoft, that the fact that I am new to Oracle. I could just go to mysql, but I want to give a chance to Oracle. I just need a nudge in the right direction to get database database server installed.
I really appreciate any idea that anyone can provide. I know that you have had other similar subjects historically, but none that I found helped me to this day. I'm a major network, so I understand that TNS is an Oracle proprietary protocol. I also understand that the listener is required to actively receive information about this port; I even took down my firewall temporarily to make sure it wasn't a problem. I even understand that connection strings are needed to associate the database Oracle, Oracle with my Microsoft OS and etc. What I don't understand, why this was so complicated. Help, please. I'm just tired of banging my head into the wall on this one.
Your friend.
Mills J
I don't really understand Windows, but I think that you must be connected to the machine as a local administrator and a member of a group ora_dba local, nothing to do with the areas he makes. It is a working example of an account that works:
c:\users\john >
c:\users\john>c:\Windows\System32\whoami.exe/User /groupes /fo list
USER INFORMATION
----------------
Username: jwvaio\john
SID: S-1-5-21-3147636863-431841176-3387327930-1001
GROUP INFORMATION
-----------------
Name of Group: all
Type: Notorious group
SID: S-1-1-0
Attributes: Mandatory, default, active group
Name of Group: jwvaio\ORA_ASMDBA
Type: Alias
SID: S-1-5-21-3147636863-431841176-3387327930-1012
Attributes: Mandatory, default, active group
Name of Group: jwvaio\ora_dba
Type: Alias
SID: S-1-5-21-3147636863-431841176-3387327930-1014
Attributes: Mandatory, default, active group
Name of Group: jwvaio\ORA_OraDb12c_home1_SYSBACKUP
Type: Alias
SID: S-1-5-21-3147636863-431841176-3387327930-1009
Attributes: Mandatory, default, active group
Name of Group: jwvaio\ORA_OraDb12c_home1_SYSDG
Type: Alias
SID: S-1-5-21-3147636863-431841176-3387327930-1010
Attributes: Mandatory, default, active group
Name of Group: jwvaio\ORA_OraDb12c_home1_SYSKM
Type: Alias
SID: S-1-5-21-3147636863-431841176-3387327930-1011
Attributes: Mandatory, default, active group
Name of Group: jwvaio\ORA_OraDb12c_home2_SYSBACKUP
Type: Alias
SID: S-1-5-21-3147636863-431841176-3387327930-1018
Attributes: Mandatory, default, active group
Name of Group: jwvaio\ORA_OraDb12c_home2_SYSDG
Type: Alias
SID: S-1-5-21-3147636863-431841176-3387327930-1019
Attributes: Mandatory, default, active group
Name of Group: jwvaio\ORA_OraDb12c_home2_SYSKM
Type: Alias
SID: S-1-5-21-3147636863-431841176-3387327930-1020
Attributes: Mandatory, default, active group
Group name: BUILTIN\Administrators
Type: Alias
SID: S-1-5-32-544
Attributes: Mandatory, by default, the owner of the group, group Enabled
Group name: BUILTIN\Users
Type: Alias
SID: S-1-5-32-545
Attributes: Mandatory, default, active group
Group name: NT NT\Interactif
Type: Notorious group
SID: S-1-5-4
Attributes: Mandatory, default, active group
Group name: logging CONSOLE
Type: Notorious group
SID: S-1-2-1
Attributes: Mandatory, default, active group
Group name: NT AUTHORITY\Authenticated users
Type: Notorious group
SID: S-1-5-11
Attributes: Mandatory, default, active group
Group name: NT AUTHORITY\Ce organization
Type: Notorious group
SID: S-1-5-15
Attributes: Mandatory, default, active group
Group name: LOCAL
Type: Notorious group
SID: S-1-2-0
Attributes: Mandatory, default, active group
Group name: NT AUTHORITY\NTLM authentication
Type: Notorious group
SID: S-1-5-64-10
Attributes: Mandatory, default, active group
Group name: Label\High mandatory mandatory level
Type: Label
SID: S-1-16-12288
Attributes: Mandatory, default, active group
c:\users\john >
c:\users\john >
-
I posted a problem yesterday, as Miss me the installer of windows. I received a response with a name attached today. My problem is that I click on the answer, I find myself on the same page that I started looking to see others who have the problem. The #1 page is where I find myself, without reference to that person's response. My problem is different in that I show the installation file in system32, but missing from the service centre. My question is that I have to read through all the posts (of which there are hundreds) to locate the person who sent my solution, or can at least find the page where it is posted. Thanks for the old man
Hello
Thank you for visiting Microsoft Community.
According to the description, I understand that you are looking for a solution for lack of Windows Installer. I will certainly help you to question.
I want you to know that you can still check your messages/questions by going to your profile and checking the activity tab.
Please check the link below for all requests by you:
I would also refer to the suggestion made by Andre Da Costa replied on July 9, 2010 from the link below:
Hope this information helps.
Meet us with the State of the question.
-
Linux.ISO missing on win7-64 host, slackware 14.0 comments
Hello
I created Slackware 14.0 32 bit OS in VMWare Player 6 on Windows 7-64 bit.
VM Player invites me to install the VMWare Tools, but the linux.iso is missing.
Where can I find this file?
-The approach
Same thing here:
"Failed to install VMware Tools. An error occurred while trying to access the images file ' C:\Program Files (x 86) \VMware\VMware Player\linux.iso "to install VMware Tools: the system cannot find the specified file. »
Linux.ISO does not exist, and I can't find anywhere to download
EDIT: VMware Player installation 5.0.2 and 6.0.0 uninstall worked for me. In 5.0.2 linux.iso download seems to work fine
-
Adobe Content Viewer missing! Win7
H
Dell Inspiron 1720 laptop computer in Win7. Creative Suite subscribed, no update available, already tried to install this http://www.adobe.com/support/downloads/detail.jsp?ftpID=5376 but nothing changes. I can get a preview on my iPad but. I wish I had this problem as soon as possible, please.
Thank you
Giacomo
Italy
Here are the steps to solve this from another thread:
(1) check and make sure that the Adobe Content Viewer displays in your Start menu. Otherwise, run it, then try the preview again.
(2) when it is installed but still works overview not try to fix up the Association of file type for .folio. See http://forums.adobe.com/message/4617478.
(3) if it is not installed try install from "C:\Program Files (x 86) \Common ontentViewer.air".
Neil
-
Please help with under drivers
Model - dv9500
(1) system base unit
Bus 2 PCI, device 5, function 3
Hardware - PCI/VEN_1180 & DEV_0592 & SUBSYS_30CF103C & REV_12 ID
(2) system base unit
Bus 2 PCI, device 5, function 2
Hardware - PCI/VEN_1180 & DEV_0843 & SUBSYS_30CF103C & REV_12 ID
(3) coprocessor
PCI bus 0, device 1, function 3
Hardware - PCI/VEN_10DE & DEV_0534 & SUBSYS_30CF103C & REV_A2 ID
Thanks in advance!
It is always helpful if you post the full product name or product number. You can find it by removing the battery and looking for the label that says p/n. display the string alphanumeric full here in your thread.
Have you looked into the system of operating systems section in guides stickied for that information?
Take a reading this post by Member Daniel_Potyrala. Read the latest pages for locations of tutorial and driver.
#1 is a Ricoh card
#2 is the Ricoh storage controller
Your #3 is that a driver Intel Core 2 coprocessor not installed n not question. Go to the driver download Intel Web page. Find the correct driver from the OS for your chipset/processor and install it.
-
Satellite L450 - 18K - Win7 install failed because of lack of CD-ROM drive
I want to install Win 7 on my laptop Satellite L450 - 18K. The laptop boot from the CDROM. I get the start installation window. When I press 'Install now' I get the message error "CD-ROM driver is missing.
I can't find a CD-ROM driver on the Toshiba homepage.
How can I install WIN 7 cost?
Thank you in advance for your help!
You try to start the installation while the OS is running or what?
And what happens when you start with the installation disc?
You want to install Windows update or do the new install of Win7? -
x 220 mSata SSD OCZ Nocti Win7 install fails
Hello guys,.
Today, I installed a new Nocti of OCZ 60 GB SSD in my x 220 msata location. at the same time, I got a hitachi 320 GB 7200 RPM lenovo stock disc.
the ssd is perfectly recognized by the bios. I use version 1.22.
now, I want to install win7 on my ssd, which has already been installed on my hard drive.
I put my copy of win7 on a USB key, it starts, select windows install.
However, arriving at the screen "Select the driver to install.", I get an error thrown to me:
"A required CD/DVD drive decive driver is missing. If you have a driver disk, CD, DVD, or USB flash drive, please insert it now. »
I have not driver on my hd/ssd and States of Web site of ocz which a) none is needed, and b) that none is provided.
I tried to install without having the hd attached, the same error.
Any of you guys have ideas on how to possibly solve the problem?
See you soon!
for one, I have not use this ssd in a laptop.
It's a terrible sandforce laptop.
You must use one of the intel ready models boot much better power profile.
more sandforce tell it different not good for the laptop.What is a clone?
you did, or a copy of win 7 with the windows 7 usb tool.You must use a very important 4 GB model or bios does not have a usb of larger size.
more little won't hold win7.
You must convert an iso, then make the USB bootable and had not accused the file system on the key.
I use a special wrench just to install win 7 only.in the bios, you can select the USB as a boot first or 2nd order.
2nd, so you must press the start command menu to select a boot device.
you not on port 0 is your right to Board, you will need to select the first boot to usb in this menu.
Make sure also that in bios flat disk of port 0 is not stopped the ist and the msata is moved to the top online.some easy ways could be pulling the 2.5 and then he select auto.
You must specify the pc what you're doing.
you don a thing out of use and who does not go to port 0 but a new port for the reader.If you select usb in the bios the first order when you reboot your system with the installation it will reinstall in a loop that why tyou select not this first, but use the menu screen. F9 or something depoends on the pc manufacturer.
If you fall into a traction of the loop, the main cause of the image is already there so next restart windows by default to the disk image and complete the installation.I know a lot of info here but win 7 can be easy to install or hard depending on if you have it down pat.
I did over 100 installs so I know everything inside and out and even I forgot to do something from time to time.Check again it is a good image on the button who made the right size in the right way and he fully bootable (huge deal - bootable)).
Select the msata as the new boot ist or 2nd as rom is foirst for most.
the old disk is 2nd.
PROMT you F to select the USB drive as the new boot device.
is nothing another pluged and do not use the combined port but I did lol he worked or sata port 3.ALSO - it's a big deal make sure that usb get you is a start control device which means power immediately.
normally we lone usb on most laptops.
Some will not be powered until this that completely initialized, this means no power when first restart.
Commen problem on mobile phones when we have the beta version of windows on the USB.
Some phones only maintain a usb on the first step.look at the light of thumb it will show if cela a port not starting.
-
Hello
Ive had good fun with my (i5) 0894 IdeaPad U160, at least until my HARD drive crashed and started making horrible noises. (Partition recovery... Miss me you so bad)
On the HARD drive and went in went an SSD (agility, 64 GB).
Now, I downloaded a Win 7 (32 bit). ISO, unpacked on a USB key using the "Windows 7 USB DVD Download Tool" and installed. However, it installs Windows 7 is slow. Miles slower than the Win 7 Home Premium making before. Install WIN 7 took ~ 4 minutes on the SSD, but no action result of windows Explorer in 2 minutes of "not responding". Something within Windows slowdown total. TaskManager shows approximately 2% of the maximum activity all in "not responding". RAM is fine.
Here's what I've tried so far:
Used 4 different Win 7 isos: with S.P.1and without, from different sources. Tried the update of Windows.
Install the drivers for the Chipset and video. Hotfix refuses to install. Not sure if Intel Management Engine installed from each window takes 2 minutes to half an hour to even appear.
Install the new BIOS.
My recovery disc is scratched and will not start. Honestly im rather sick of having to run PC decr.apifier with each new installation, so I prefer a clean install anyway. How the hell can a new Windows + U160 not work? is the only option to buy Lenovo recovery for 30 dollars and decra.pify disc my PC again? Or my PC sent to Lenovo for several weeks? (then decra.pify it). Lenovo, will install an operating system on a spare HARD drive?
He spent about 10 hours now reading the forums and trying to make it work. It seems to be a lot of ppl on the net with a similar problem and zero with a response. Which driver is causing the slowdown?
OK, answering my own post:
http://www.WinFuture-Forum.de/index.php?showtopic=184160
In short:
Windows has had problems with AHCI drivers.
Fault lies somewhere with [Windows, manufacturers of disk architecture Council]. A fast drive can lead to a mess while many data access (Installation / games) (Race condition). Download the latest driver AHCI (10 V) from Intel has solved my problem. Fixes to Microsoft or Service Pack for Win7 should help too. Theres also new chipset drivers out there.
Unfortunatelly it was not possible to run the disk in IDE mode, the pilots had to be installed when the drive kept freezing.
-
Missing utilities after installing SSD and restoring from Time Machine
Today, I installed an SSD on my mid-2012 13 "MBP (Mavericks running) and then ran the restoration of service Time Machine to bring back everything that I used. All right, except that now I have discovered that Time Machine never backup my Utilties like disk utility, same Terminal is missing.
I have a bootable USB with the Mavericks installation app on it, but now if I run, it's going to destroy everything Time Machine has done to restore (my CC Adobe apps and plugins, for example)? I would upgrade to El Capitan, but I use an old Wacom which does not have the drivers for the last OS X, so I'm stuck for now (do not want to buy a new Wacom immediately).
Any ideas on how I can get these dos utilities without using the re - install or upgrade process? I watched the old backups TM and they aren't there either.
You will have to reinstall the operating system to get the dos utilities.
Start of recovery volume (command - R on a restart, or hold down the option/Alt during a restart and select the Volume of recovery). Run the check/repair disk utility and repair permissions until you get no error. Then re-install the operating system.
-
Profile missing on new install
My original problem was with the transfer of a profile to a new computer, but I'll come back later. Trying to fix it seems to have created another.
When I run my * newly installed * version of Thunderbird, I get the error message "unable to load your Thunderbird profile. It may be missing or inaccessible. "It's probably because I deleted the profile folder - notice, I did it before you uninstall then reinstall TB. I assumed that a new facility would create a new profile, but appears not to be the case. How can I solve this problem?
Note: I deleted the folder because it has been corrupted when I replaced it with my old profile, so I can't just 'undelete' to obtain a profile of back work. Win 8, previous profile was created under Win XP.
Start the Profile Manager and delete the orphaned profile entry.
http://KB.mozillazine.org/Profile_manager
Create a new profile, and then copy the old top.
-
My wife has an HP Pavilion DM1 is a slug running and I want to do a clean install of Win7 without all the bloatware that is come upon her, but realized that this little book is not a Microsoft COA top sticker to do the reinstall. HP did ship of this machine without an activation code Win7 on it? If Yes, is there a way I can get the code to make a * clean * install or should I just use the system recovery disk to go back to the factory? I have a few old machines COA stickers, but did not burn one if I had to. Any help/info is appreciated.
You are the very welcome.
The recovery disks should be pre-activated and there should be no need to enter a product key.
But you will need to uninstall the bloatware that will be reinstalled, unless your recovery disks for a reduced recovery.
Maybe you are looking for
-
Music App not fuction wellafter updated to ios 9.3.5 to ios 10. Help, please
-
Recovery of Satellite P200-13V - Check disc Add on message
Hi all When I run the recovery disk product Toshiba 1/2, after a while, I get the message: * "Check for disk add-on' *. 1/2 disk does not continue. Also the recovery disk 2/2 does not react. It seems that it is looking: *E:\TOSHIBA\add-on\add-on.cmd*
-
T400 cannot change the brightness of the screen
Hi all I just bought a new T400 and my screen brightness can change. No matter on battery or AC power, there's always the brightest mode. When I press Fn + home / end, the indicator changes accordingly but not the screen itself. Someone at - it feel
-
How can I reinstall the Freecell in XP?
Original title: Freecell in xp How can I reinstall the Freecell in XP?
-
Hotmail (windows live) has stopped allowing me to attach files or photos; I did no chages to systwem that I'm aware of; Please help someone!