Provisioning of the TMS - the model schema question

Similar Questions

• Error trying to save the binary XML storage model scheme

  Hello
  
  I am trying to record my XML schema to the server 11 g for use in the binary XML storage model. Here are the details:
  
  BEGIN
  () DBMS_XMLSCHEMA.registerSchema
  SCHEMAURL = > ' / sys/schemas/ACSSWEB/ALLMDN_BinaryDetailsSchema.xsd',
  SCHEMADOC = > XDBURIType('/sys/schemas/ACSSWEB/ALLMDN_DetailsSchema.xsd').getBLOB ().
  LOCAL = > TRUE,
  GENTYPES = > FALSE,
  GENTABLES = > FALSE,
  OPTIONS = > DBMS_XMLSCHEMA. REGISTER_BINARYXML);
  END;
  
  I get the following error message:
  
  Error report:
  ORA-00406: COMPATIBLE parameter must be 11.0.0.0.0 or higher
  ORA-00722: feature "binary XML".
  ORA-06512: at "XDB". DBMS_XMLSCHEMA_INT', line 37
  ORA-06512: at "XDB". DBMS_XMLSCHEMA", line 65
  ORA-06512: at line 2
  00406 00000 - "COMPATIBLE parameter must be %s or more."
  * Cause: The COMPATIBLE initialization parameter is not high
  sufficient to allow the operation. Allowing the command would be
  the database is incompatible with the version specified by the
  current COMPATIBLE parameter.
  * Action: Shutdown and commissioning with a higher compatibility setting.
  
  
  (1) someone can you please confirm - if change the compatible parameter will help accomplish this?
  (2) is there one other way (other than to change the compatible parameter) to make this work? My DBA are not immediately ready to change the parameter with the fear of breaking legacy applications even in the test environment. I seek an alternative solution to help me analyze the binary XML storage model.
  
  PS: I am a newbie to XML DB native development. So please forgive me if I asked a very simple question.

  Binary XML is a feature of Oracle 11, which is why the error message.

  There is probably an event (Oracle support/internal) parameter that once was able to make this happen in point 10.2 as well or, despite you must also update some of the registered scheme etc., etc., etc. to the point 10.2...
  In short: he took no other way responsible to do. Set the compatible parameter 11.x if you want to use storage binary xml based schema.

• Question on the model of Microsoft comfort keyboard 1. 0a 1027

  I have the model Microsoft comfort keyboard 1. 0 to 1027, and I spilled a sticky drink on the keys. My question is how the keys break away from this keyboard?

  Hello

  You can contact the hardware support for assistance. Hardware support people would be best to answer your question:

  How to contact Microsoft if you have questions about your hardware device.

  http://www.Microsoft.com/hardware/en-us/support/contact-us

• HTML (Web), I have a question about the models.

  Hello CC animate developers.

  New features are really good.

  HTML (Web), I have a question about the models.

  <! DOCTYPE html >

  < html >

  < head >

  < meta charset = "UTF-8" >

  < title > $TITLE < /title >

  < meta name = "ad.size" content ="width = $WT, height = $HT" > "

  $CREATEJS_SCRIPTS

  $SCRIPT_START

  var canvas, stage, exportRoot;

  function init() {}

  $CJS_INIT

  }

  $PLAYSOUND

  $SCRIPT_END

  < script type = "text/javascript" >

  "clickTAG" var = "";

  < /script >

  < / head >

  < onload = "init (); the body"style =" background-color: #D4D4D4; " margin: 0px; ">

  < a href = "javascript:window.open (window.clickTag)" >

  < div style = "position: absolute;" cursor: pointer; box-sizing: border-box; border: 1px solid #000000; overflow: hidden; height: $HTpx; Width: $WTpx; Background: rgb (255, 255, 255.0); "> < / div >

  < canvas id = "$CANVAS_ID" width = "$WT" height = "$HT" style = "background-color: $BG" > < / canvas >

  < /a >

  < / body >

  < / html >

  In the example above, the model;

  < Meta name = "ad.siz of" content = "width = $ WTI height = $ HT" > "

  and

  < Div style = "position: absolute;" cursor: pointer; box-sizing: border-box; border: 1px solid # 000000; overflow: hidden; height: $HTpx; Width: $WTpx; Background: rgb (255, 255, 255.0); "> < / div >"

  I use labels. But these tags in the template and import, it gives an error does not occur.

  I think it was a mistake. I want to help in this regard.

  $ HT or Properties $WT , I get an error when I use elsewhere.

  I think I should be able to use anywhere I want.

  The same problem here - I worked around by some DRM models with different values of ad.size, but it's a solution quite short-seight

  Also - you are not able to create the model with transparent background by removing style = "" background-color: $BG ' as it also throws errors - is the only solution that I managed to get updates style = "background-color: $BG; background: none; ", but it's a really bad way of coding things.

  It would be really great to have freedom in changing patterns.

• concurrentRequest page of the OFA, runs, but don't choose the model of provision.

  I went through a lot of threads and dev ofa guide and I assured the controller of my custom page concurrentrequest.
  but when I find out, it errors saying the output is not generated for this request.
  
  Details of the conc program - its a report oracle user can run when needed or it should be able to call from pages of the OPS.
  report is bound to the rtf template that opens the report in pdf format.
  If I run the report of conc Prog... it works fine, but no page of the OPS.
  
  Here is the code:
  CO:

   if( pageContext.getParameter("concurrentprogram") != null)
   {
      Serializable[] p = {modelid};
      int reqId =  ((Integer)am.invokeMethod("submitCPRequest", p)).intValue();
  
      String url="OA.jsp?akRegionApplicationId=0&akRegionCode=FNDCPREQUESTVIEWPAGE";
      pageContext.setForwardURL(url,
                                null,
                                OAWebBeanConstants.KEEP_MENU_CONTEXT,
                                null,
                                null,
                                true,
                                OAWebBeanConstants.ADD_BREAD_CRUMB_NO,
                                OAWebBeanConstants.IGNORE_MESSAGES);
    }

  AM:

    public int submitCPRequest(String s1)
   {
      try {
           OADBTransaction tx = (OADBTransaction)getDBTransaction();
           java.sql.Connection pConncection = tx.getJdbcConnection();
          ConcurrentRequest cr = new ConcurrentRequest(pConncection);
          String applnName = "MAC"; //Application that contains the concurrent program
          String cpName = "MACZMDLRL"; //Concurrent program name
          Vector cpParameters = new Vector(); 
          cpParameters.addElement(s1);        
          int requestId = cr.submitRequest(applnName, cpName, "", "", false, cpParameters);
          tx.commit();
          return requestId;
      } 
      catch (RequestSubmissionException e) 
      {
      throw new OAException(e.toString(),OAException.ERROR);
      }
    } 

  its not to choose the model of the xml editor. ... of ideas?

  Use following when sending request addition to what you do now,

  ConcurrentRequest cr = new ConcurrentRequest (pConncection);
  cr.addLayout('XXEGA','XXEGA_IBR_BOM_EXPORT','en','US','PDF');

• changes to the sound scheme are not saved

  I can't change the sounds associated with events, via the control panel - sounds and audio devices - sounds. When I make changes that they do not stick. They change what they were before.  The only way to change the sounds associated with events is to edit the file regristry (HKEY_CURRENT_USER\AppEvents\Schemes\Apps\Explorer\EmptyRecycleBin or BlockedPopup).  Any ideas?

  Hello

  ·         Were you able to change the sound scheme on the system without any problems before?

  ·         You encounter an error message when you try to change the model of sounds on the system?

  ·         How long have you been faced with these questions to?

  ·         Remember to make changes to the system?

  I suggest to disable the antivirus software on the system and then checks to see if you are able to record the sound scheme.

  Note: Activate security software once you've done the test.

  Also, I suggest you follow the steps mentioned in the link given below.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-desktop/XP-Pro-SP3-sound-schemes-forget-saved-sounds/4f0f46ff-5372-4DB5-A265-b4acba2e4254

• Updated the models encourage not updated on sync

  After talking with an assortment of people Adobe, I was advised to take my question on the forums to see if someone else might have a workflow that will accomplish what I am trying to acquire: a model master centralized control, out of which subsites can base their models. (I apologize ahead if my entry takes an arrogant tone.) For brevity, I'm being pretty straightforward - I'm not really a Dreamweaver-enemy.)
  
  Here's the full version:
  We are a large company, and the public Web site is all custom code. However, we have many departments, and many of them have their own public information sites. We use Dreamweaver on a departmental level for the public web site of each service, managed by a person designated by him in this Department. The idea is to have a "company" basic model that establishes the catch-all provision that each of my Department webmasters can use as the basis to create a template for the site of their Ministry. Theoretically, they don't would be concerned with the details for their Department and would inherit a widespread company container from the main template. (Currently, it's the Wild West, and each Department is responsible for their own model - you can imagine the wild variations in appearance through our presence on the web.)
  
  When I initially created each service to have a web site, I manually create their models / directory on the server and put the main template in this directory (in fact, each Department has just a symbolic link to master, but I digress). The permissions are such that they cannot edit this file on the server. (They obviously can change it locally, but it can never be replaced on the server - if I could lock it so that they could not accidentally change it locally, I would do it; but I don't know how to do such a thing without having a flag 'read-only' on the model or something Dreamweaver.) Yet once again, I digress.)
  
  In any case, what I want to do is the following: in the event that the main template on the server changes (which would result in the file of Templates/Master_Template.dwt for each service I placed there immediately appearing to have been changed), I might have users synchronize their site (that overused realization of Dreamweaver that changed the model), pull down the model and be invited to update their template Department (because it is based on the model of 'master' now-changed), which would be cascaded to update pages based on the model of their Department. Theoretically, this should work, because if you actually open the local copy of the Master_Template.dwt, change and save it, the update process works exactly as it should.
  In the real world, however, the "...". and update their Department model... "part is where the process stops, because when a template file is updated via synchronization rather than change manually, either this opportunity to update all dependent resources (potentially outdated) is presented.
  
  It was suggested to use Contribute for the Department, but Contribute sites with no knowledge of the elements of library or the modification of the model, it should be I have centrally manage * all * models instead of just the main template - and that's exactly what I'm trying to escape to do by delegating peacekeeping each ministerial department site.
  
  The only work around I can think of is this: in the case of an update of the master model, have each user synchronize their site, pull down the new master, open it, make a few simple changes (a space or similar), delete it (so the model can be saved) and then save the now-modified-but-not-actually-changed local main template file, which would engage the update that I'm looking.
  
  Such a process might generously describe "subject to error."
  
  I'm a little surprised that this kind of thing has not been processed (that I can find) front. If it was, I'd like a link. The solution is such a good fit that I'm reluctant to give up Dreamweaver and go with something else - looks like a lapse such small feature - but he tanks completely the overall strategy.
  
  Frankly, I think it is a bug. I don't think it matters how or by whom the changes made to the model - if Dreamweaver ever notice that the model is different, he should realize that any resource based on this template could potentially be stale and offer the possibility to update. Or, at the very least, there should be a way to "Refresh" the site - have Dreamweaver compare the State of each resource to their ancestor model (s) to check the consistency and offer the opportunity to upgrade at that point to the possible contradictions. Something else that "synchronize your site, open the main template, add a space, delete, save, updates start" would be a better solution to workaround.
  
  I can't wait to hear suggestions, however.

  Quote:
  Posted by: newsgroup user
  I'm not aware anyway make it work the way you are the Template of DW engine
  describing. The Templates folder and its files of constitutive models MUST be
  in the root of the site.
  However, I confess, I have not read your post in full to extract all the
  the granularity that you offered. If I missed something, please let me
  don't know.

  No, has nothing to do with what I'm trying to do.
  However, I received a correction to part of my message of an engineer from Adobe:

  Quote:
  Hi Travis,
  I read your post on the forum and agree it would be nice to have this kind of functionality in Dreamweaver, but because this isn't the standard use case (a site other subsites of conduct), you have to pass through a hoop more in Dreamweaver, rather than simply synchronize.
  I don't think you have to do the steps, opening the modified model, bringing a change, delete, and save. On the other hand, it please try the menu item:

  Modify > templates > update Pages.

  This should update all pages according to the current state of the Templates folder. Thus, instead of your steps: "synchronize your site, open the main template, add a space, delete, save, launch updates. Please try:
  1. synchronize Site
  2. modify > templates > update Pages...

  I totally forgot this menu item - it provide a usable workaround.

• Pages export to Word using the model of NEWSLETTER, issue 1 of page spacing

  QUESTION: Anyone know if model NEWSLETTER (and or Museum Brochure) correctly export to .docx and how delete images or change the text boxes using these models so that I am still able to export properly?

  I used the NEWSLETTER model, whose Pages can export to .docx and then import to .docx (I don't know if that Word can do, but Pages indicates it would be).

  Problem: after the header of the newsletter, I removed the photo and have floating only the areas of text underneath.  I have two pages, the 2nd page export perfect (a page break separates it from the first).  On the first page, there are 12 small boxes in two columns under the heading who generously and easily fit on the first page.  It is not unlike the model I have, however, but with no photos.  I've seen many templates use these 'boxes' in support of the columns of text on a page, I don't think the floating box would be a problem.  However, I like the wish of floating boxes to learn how to use them so that they "work".

  I saw immediately that the text boxes, I added, when export and imported .docx, lose their place and float under the heading (NEWSLETTER) (superimposed text, bad page layout).

  I noticed the paragraph (carriage return, Enter) symbols, while I moved around text boxes, had become interlaced between the boxes, but not all - 1/2 at the bottom of page.  I then noticed that attempt to remove the superfluous paragraph runs in .pages (after repositioning all the boxes), but aggravated .docx, also the Pages do not leave even to remove the first symbol (it mystifies me, because the models do not appear to use paragraph at all except inside the floating boxes).

  Finally, I added enough symbols paragraph so that there was a conflict between each text box, but not as much as Word decide to add a blank page.  I had to make sure the columns are too wide - they should be 1/4 "part we will tell.  THAT APPEARED TO WORK.  Pages exported and imported it point by point I was happy.

  But when my Advisor job achieved and open in Word (the one for Windows 7), the SAME problem, I had before setting the transport returns appeared: the two decoders or four are overlapping the title, and set the person must have inserted transport returns before the first text box to move it all down (which seemed to work - but failed as an export and no not to use practice later).  'good work '.  Fortunately, I also have attatched a PDF export, however the person had asked to change their PLU using high government dell.

  QUESTION: Anyone know if model NEWSLETTER (and or Museum Brochure) correctly export to .docx and how delete images or change the text boxes using these models so that I am still able to export properly?

  Thank you hope that your next print job loose its staples.

  Well, we have said for years in this community if you want stressless, architecture native document exchange with Windows Word users that you need to use the most recent Word available on the Mac.

  Pages is not a clone of Word, and Apple does not guarantee that the open translation process / export from/to the architecture of document Word will remain faithful to the original of the document formatted.

  In response to your questions:

  1. If you have document objects in a model with x on their border, and then the object is locked. You visit the tab Pages to reorganize v5, and downstairs you can unlock these objects for further editing, or deletion.
  2. It is advice that we can give here will make sure Pages exports specifically to the word he already did not. The logic of translation is connected to demand, and it is the price of roulette.
  3. Continue the first paragraph.

• change the model fades into the track edit window

  Let me repost with corrected language

  I opened to the top of track editing window for a track of the model. (audio) I can see in the editing window track fades, but when I try to edit them in any way it does not work.  Logic does strange things at this stage. For example when trying to remove a fade, it deleted all the fades in the editing window track, but they still showed in the way of the model. I can edit the fades on the trail of the comp itself but even if I use the gradient tool, I can not change, delete, fade in the window track editingetc.  It is with the button change the runway model turned on and off.  I hate to say this again, but I watched a video online where the fades were easily edited inside the editing window track, but I have tried everything I can think... any ideas?

  I finally understand what you mean and I do not know the answer and look like a bug. I asked this question on another forum to see if others know why this is happening. Very strange...

  I made a sample video and will provide to Apple if verified as does not not as expected.

  Thank you for your patience to explain this...

  Look at the fading in the arrange window as I "try" edit the fades in the track editor. After selecting the header, you should see all the (colorized) model in the editor of track (not if you select the region, but if you select the header) - and you do not have...  Hmmmmmmm...

  

• HP laptop: enter the model number and get a "game too many results.

  My HP laptop dies after 6 weeks. When I contact support, he asks the model number. I enter: say "15-ay041wm" is what the box and laptop. I get a reply that says.

  "Sorry, too many results match your search for 15-1y041wm.

  "So I try HP Notebook, I get the same mesaage above, except with the HP laptop ' instead of '15-ay041wm.

  Because no matter where I'm going, he wants the model number and I give, I can't help. No cat, no nothing.

  So someone can tell me how to get support?

  If HP is unable to handle the number of model of it's own computers, so I'm not very confident.

  Here are the free support number to call in the USA/Canada... 1 800-474-6836.

  Now here's another question, you can report to HP on if you want...

  You must stay online and listen to the automated assistant trying to talk to you to talk to a representative... visit the HP website... go to this support forum (which has no official presence in HP), etc.

  After a minute or two, the Assistant to say, if you can't get online, will stay on the line to speak to a customer services representative.

  This is when you will have the opportunity to speak with a support person and report the problem to open a pension case.

• Satellite Pro A300D - what is the model number for the keyboard?

  My husband managed to dislodge a key on my keyboard CAP and broke the clip white scissors that holds up on... (don't ask me how)

  He spoke of the authorized service center here in Norway and they sent us replacement scissors tongs (actually they sent an old non-functional keyboard), but the clips are of a different design to those on my laptop.

  I was wondering if anyone has an idea of the model/serial number of the keyboard used in the Satellite Pro A300D-151 (PSAK9E) so I can get the correct replacement part.

  I really don't want to have to replace the entire keyboard when it's just 1 scissor clips which is broken... the laptop is only 5 months old.

  Here are some pictures of the scissors clamp in question and where it attaches to the keyboard (sorry for quality)

  Link: [http://img31.imageshack.us/gal.php?g=1000683o.jpg]

  Thank you

  notsure

  Hello

  Boyfriend sorry but it is not possible to exchange a few individual keys on a keyboard, so in this case, you must replace the full keyboard. But normally, it shouldn't be so difficult.
  Either you exchange the keyboard yourself or you sent the laptop to the authorized service provider.

  The model number for the keyboard is not known to me but contact your ASP! They can order all the parts of Toshiba and they should know the right part number.

  Good bye

• How can satellite M30x, I find the model number?

  Hello
  need to get the drivers for my old Toshiba Satellite M30x *. The stickers below are washed out and I can't read the model number more.

  How can I know the model number to get the right drivers?

  Thanks for help

  Hello

  I checked the Toshiba download page and for Satellite M30x it is a model only PSA72E.
  So just visit download page of Toshiba under http://eu.computers.toshiba-europe.com > support & downloads.
  When you open the download under product type area, select option ARCIVE and you will find the drivers for your model laptop.

  If you have any other questions please let us know.

  Good luck!

• Need to identify the model A100 to select the good BIOS update

  Good morning to all and thanks in advance for any whole made :-> assitance

  My question is this:
  How to identify the exact model of a Satellite A100 PSAAxx series laptop?

  Reason:
  I need to update the BIOS and I'm uninclined to simply apply the updates, I could get for fear of turning it into a brick.

  What I know:
  There is some time, my wife and I bought a used Satellite A100 - in good working condition, but warned that he has 'problems' with USB ports driver. The time has come to address the issue of the USB, and the upgrade of the BIOS seems to be a good starting point.

  At the time of purchase, the label with the model number and the number of harem on the bottom of the system was quite readable - unfortunately, this label has subsequently lost all 'tailor-made' (we know what the fields are called by all useful information has disappeared).

  It is a Toshiba Satellite A100 (I have discs recovery and thus marked user manual).
  The user manual specifies the model number PSAAxx.
  CPU: Celeron M 1.4 GHz
  RAM: 704 MB
  HD: 40 GBbyte
  Graphics card: ATI RADEON XPRESS 200 M Series
  BIOS: v1.20 2008-12-12

  Any suggestions gratefully received

  Peter Townson :->

  Hello!

  To identify what A100 you exactly, you can use Toshiba PC Diagnostic. If you have installed the laptop with the recovery disk, this tool is installed too.

  If you n t have PC diagnosis, you can also download:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In the diagnostic tool you can see on the part number (basic information of category).

  Good bye

• VDM 2012 Algorithms.MatchPattern2 SP1 has the image of the model

  My application requires (acquisition and treatment) fast enough repetitive image<100ms per="" cycle).="" kind="" of="" "realtime"="" processing,="" i'd="" prefer="" not="" doing="" post="" image="">

  Currently the image processing takes ~ 200ms per cycle (mainly grey filtering image).

  ~ 150ms of this time is taken by load images from disk or cloning model images of the model (using the flatten/unflatten visionimage).

  The reload or cloning is that the Algorithms.MatchPattern2 has the image of the model during execution, i.e. I have to reload or clone images model each acquisition/processing cycle.

  Ideally, configuration I would like to provide 1 x set of images of model for processing application that is reused (without cloning) each treatment cycle to a time of 50ms ~ process.

  Patches or a workaounds?

  Thanks for the reply Rob.

  Note: I use .net VDM and coding in c# libraries.

  My purchase is decoupled from my transformation. The main reason to mention the acquisition should provide a bit of context to my question.

  I first thought that my large KING was originally the processing time increased (initial duration process = ~ 230ms). Then I reduced the sizes of my Kings and improved the execution time = ~ 190ms.

  I am currently creating a model images table and passing to the function (essentially by 9 x 1 x OCR and correspondence to the model) image processing.

  When I remove the model image cloning code (visionimage flatten/unflatten), the image processing function runs in 50-60ms but runs only once. On the second cycle of the excution, it throws an exception.

  "Cannot access a deleted object."
  «Object name: "NationalInstruments.Vision.VisionImage".»

  I'll try MatchPattern 3... My current version doesn't have a MatchPattern 4.

• Non-linear curve fit the model of reference file

  Hello.

  I use the VI of the non-linear curve adjustment in order to adapt the data. The reference to the fitting VI model I use is included in the attachment. You can see that I have a few constant wireline, like 4, 2500 and 1. I want to do this constant variables I'll change before each curve corresponds, because actually in my problem this variables I know before the adjustment and they are constantly changing, and for the moment this made VI just to test.

  The problem I have is that I can't enter the values of this variable to my main VI, where I also call the VI was nonlinear. The scheme of connection of refernce VI made must be changed in order to be recognized by the VI was nonlinear. I tried to use a table to transfer variables, but if I use one, it recognizes the variables as parameters of editing and he's trying to install as well in the adjustment process, and it gives me erroneous results.

  Any ideas how I can add the values of variables?

  Thank you very much.

  Kind regards

  Nikola comedy

  To provide additional data randomly in VI of model, you must use the entrance of 'data' (it is a variant and so can contain anything you want!). Just create any type of data you want (generally a cluster if there are several values of different data types) that contains all the values, convert them to a Variant in the main VI and the variant of wire to crimp her. In the model, you convert the variant return to data, to the constant help of cluster, such as defined in the main as VI 'type' (simply right click cluster in the main VI... wire Create constant... move the constant in VI of model). Now, to unbundle the different values and use them anywhere inside your model.