PS and AI update and both have stopped working

Similar Questions

• Assassin's Creed and Hitman have stopped working, is there a solution?

  I have Creed of Assassin's I, II and brotherhood, Hitman: Silent Assassin, Hitman:Blood Money, Hitman:Contracts and the original 47 Hitman:Codename.  Now one of the seven will load and read, but it's the only program, the only one that does not appear on the list of installed programs, being the Codename 47.

  These games, used to work just fine until Ubisoft has improved the Game launcher to 2.x software and now all my games that are installed have stopped working and fail to finish loading.  They claim that the pitcher throws other programs on the PC outside their software.  Now none of them work, including other games that are not Ubisoft.  I tried CCleaner, uninstall, then reinstall, etc. anything.  They seem to have changed some of the files base within the Pro Win7 OS I use.  It of very frustrating and lost more time to try to nail down trying to find the changes that have been made.  Short of a new Win7Pro facility, which would empty all the software that I installed and if I do that I can as well wipe the entire hard drive, and then start over again, I really don't want to do.  I'm afraid that if I buy a new game that uses graphics to high-end of my CPU and GPU capabilities, it does not work either and it will just be wasting my money and time as well.  Is there any real help to this other question that the stars from scratch?

  I built my own off the shelf components, is a system of Wintel ASUS mother board and video card (ATI 1 GB), Intel processor i7 quad core 950 3.07 GHz, Win7Pro, 6 GB of DDR3 RAM, etc.  just a notch below extreme, built when the 950 had just been out for a month or 2.  It was and is still, works very well.  Somehow the OS files seem to have been changed.  All other software such as AutoCAD and other rendering software, works very well.

  So I think a Ubisoft launcher feature is supposed to prevent you from having to be online when you play the games?
  All of these downloads of steam games or are they a mix of disk and download?

  Have you tried disabling your Virus Ainti?

  I still don't think that the "launcher" mess with Windows is just a buggy application and is may be in conflict with something else.
  You can try running through clean boot to see if there are conflicts.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If there is no joy in the light of the foregoing, and the game specific forums (I see there are a lot of entries when you perform a search on the web about the Ubisoft Launcher) do not always provide a fix, I'd be inclined to do a system restore and to uninstall the game and return as it is or wait until Ubisoft unravel the 'Launcher '.

  "Ubisoft and Steam do not have the Hitman series.
  Quite right - EIDOS

  "They really need to regroup."
  You're not wrong. Beginning with a focus on customer satisfaction and service rather than deal with the honest customers like the enemy, but unfortunately, Ubisoft is not alone in this attitude, it is pervasive throughout the "industry" of the game.
  Another reason for the bad attitude of the suppliers of computer software is the people
  the Government doesn't understand computers and let software vendors
  away with things than the other mfg cannot when it comes to the marketing of a defective product.
  Here in Oz, we can return a store bought game that wreaks havoc on
  remove the machine as this game is made to your (not offering is not an alternative to not install the Launcher is an abrogation of our rights), as something that does not work as intended or designed is deemed defective, but dealing with one online
  provider as the steam is a minefield with little protection by the law of sustainable consumption.

  Games Steam can be a problem. What I hated on steam before getting broadband services (only on 18mos ago) was having to update the game before you play. Even offline.
  I was unable to play (purchased on disk) FEAR2 for nine months because of the huge (a little less than 2 GB) patch. When HL2 is released, it took, I don't even remember how long, to be able to play the game for the same reason.
  I should have returned FEAR2 (HL2 came with a gpu) but I new that I have to get broadband in the end.  so I don't bother.
  Steam is fortunately fairly well adjusted these days. As long as you have
  Broadband and let the steam do as he wishes on the Steam Client and updates when you start Steam line, and then play games
  of steam offline is no problem.
  The new kids on the block are still going but one, ' to make the consumer a
  Beta-test of Guinea pig while we try to imitate the steam ' phase.
  GFWL (not exactly new) is always a big fight that I would be a little further
  (in my dreams).
  Come EA from what I've read is not much fun for some either.

  .

  .

• I get pop up of the reviews that say 'winrscmde' and 'todo' have stopped working

  Original title: todo and winrscmde notice

  I get pop up notices that say 'winrscmde' and 'todo' stopped working and windows will look for a solution... but nothing found... How can I get rid of these annoying things?

  Thank you, I finally had to get online assistance to eliminate the obvious infection.  I also downloaded Windows Defender in offline mode.  This combination has finally got my computer to work.

• Word and Excel have stopped working in my Office 2007 program

  I run Vista on my computer.  Outlook recently took several tries to open.  Then, or perhaps at the same time, Word and Excel have refused to work.  If I reload Office 2007, what willhappen to my existing address book and other files?  Will I have to reload them too?

  Other solutions other than the Office of relaoding?

  They will help you in the Office discussion groups:

  Office:

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Office newsgroups

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Office.misc&lang=en&CR=us

  Discussions of general issues of the Office.

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Outlook.General&lang=en&CR=us

  Discussions of general issues of Outlook.

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Word.docmanagement&lang=en&CR=us

  Discussions of general issues of Word.

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Excel.misc&lang=en&CR=us

  Discussions in Excel General questions.

  They will help you with your office questions when repost you in the Office discussion groups above.

  See you soon.

  Mick Murphy - Microsoft partner

• My desktop icons and shortcuts have stopped working

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • Recently, I downloaded the service pack 2 for Vista
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Go to http://www.mydigitallife.info/2008/06/22/reset-and-fix-broken-windows-vista-file-ext-and-type-associations-include-exe-com-sys-zip-lnk-folder-drive/ and run the .lnk .exe program and file types.  That should restore the functionality on your desktop.

  If you have other types of files that do not work, see this article to change their: http://articles.techrepublic.com.com/5100-10878_11-6172036.html.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Touchpad and clicks have stopped working on my laptop

  Original title: can I FIX?

  Well, my friend, I think that has a press that has locked his left click on its mobile Gateway (primary)... also as of today the right click on & touchpad no longer responds to commands?  Last night @ least right click on, then press the key worked a bit, but today NOTHING. I did research on my laptop and found tips and ways to try and solve this problem.  Unfortunately... I need to use the left or right click and the touchpad? ... what a bum - sea... Laughing out loud!    So I thought to restore Sysem (startup hoping to repair would help) HA! ... need to left click to activate... OMG!  My question is... are there any key that can be used to do what the right, touch pad & clicks left to do? My friend's son Granny and she's really down because she said she hit some buttons @ top?  Right now the computer waits for me to "click on restore" Startup Repair, but I can't... R & L clicks and touchpad don't answer cammands... Thnx in advance 4 help

  Thnx a lot to the person who helped me with the question WinDefendr & SecEssentls (smile).

  Hello

  Startup Repair and system restore are two different things.

  System Restore is used to put the settings of your machine to a previous point in time before that happen a certain problem. I hope it would work.

  Startup Repair is used if your machine does not fully start in Windows.

  Make sure that you are not looking to restore to factory settings. Who says back to nine and erases all data from the hard drive.

  You can try to connect a USB mouse to use to try of difficulty and derivation for now the Touchpad problem.

  See you soon.

  PS You can also try hard restart it and see if it changes Mode without failure.

  You can work there to do a system restore while in there.

  "How to start mode without failure.

  http://bertk.MVPs.org/html/safemodevista.html

  How to do a system restore:

  http://bertk.MVPs.org/html/restoresysv.html

• The two shift keys have stopped working on my satellite

  Hello

  I have a problem with my shift keys; left and right have stopped working.
  I have no idea if it's a hardware or software problem.

  Any type of combination of key or software could disable them or it's a hardware problem?
  If so, what should be the fix in both cases. If so...

  Thanks in advance.

  Maybe "StickyKeys" activated? Take a look in Control Panel-> accessibility

  Disable it in release 'using the shortcut '.

• My wireless and mute, volume up/down buttons have stopped working together.

  I have a HP Pavilion dv6-2113TX, and all of my upper buttons (mute, volume scroll and wireless area) have stopped working. I fall there are about 3 weeks and not very high, only about 1.5 ft, but I worry that this may have had something to do with my problem. What should I do?

  Hello

  It is always interesting to try a Hard Reset as follows.

  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery, connect the power adapter and start Notepad.

  Kind regards

  DP - K

• How to get help with Add ons and extensions that stop working

  I have saved passwords and it has stopped working. It's so hard to get help with Moxilla

  rosemarybales said

  I still don't know why the extension button passwords saved with the key icon has stopped working.

  This button displays the saved passwords in Firefox's built-in password manager, is no separate passwords that record you in Dashlane. Can you save passwords in both places? (Well, I guess you do.)

  I have a guess on why it has stopped working. Firefox 40 has some changes to how extensions can work with the user interface, so quite a few extensions that have been more than one year must be updated for Firefox 40. It has been updated on January 10, 2012.

  Anyway, the way of 'long' to display the passwords saved in Firefox is through the Options page, the Security Panel, the saved passwords button.

• USB mouse and keyboard suddenly stopped working

  My USB connected Microsoft USB Bluetooth mouse and keyboard suddenly stopped working today. After researching everything I could, I didall that I could find as a possible solution that has been:

  • Update of the chipsets
  • Uninstalling usb in Device Manager and reboot devices
  • Updated via Device Manager, usb devices
  • Reformatting and reinstalling Windows 7
  • Stop, unplug and allow the card mother "reset".
  • Try multiple ports
  • There is no 'connect' button on my mouse so I can not sure try this
  • Replace the batteries in my mouse
  • Obviously both devices have been connected
  • Updated the software for the mouse

  I have tried literally everything I could think of or read previously and I am out of options. Oddly enough however, after reformatting and reinstalling windows, my USB storage device is found and is working, but the keyboard and mouse are not. Please don't bother not suggest anything I listed above, I obviously already tried and found no chance.

  Update
  I have solved my problem. For later use, if anyone has this problem and no other solution seems not work; That's what I did.

  I bought a USB 2 ports PCI card and installed in my computer, then go back to Windows XP. While my original front and rear USB ports still recognize a flash drive, they do not recognize the keyboard or USB mouse, make ports PCI card. I had also updated ALL the updates of windows on the site, not the auto update available on the desktop. Although I don't know the cause, I am certain that somewhere, something was is altered by the hardware or software, and my default USB ports do not recognize mouse or keyboards.

  Another piece of knowledge in case anyone is interested; I use a card mother gigabyte s-series and my nvidia video card GeForce previously is no longer recognized in the port, it would cause my computer go into a State of hibernation and the monitor would go into "Analog Power Saving Mode". The only solution was to spend a friend with my video card. (Its graphics card is a GeForce 9800 GTX, mine was a GeForce 9800 GT. No reason why it should make a difference.) According to me, even if my computer is less than two years old, I was sold a bad mother. I read online cases in other forums for technical support of people having the same problem. Gigabyte motherboards stop random ports for no known reason.

• After the update to os2.2 my notifications sounds have stopped working

  After the update my os 2.2 shows that my notifications have stopped working, I tried to reinstall the software and I restarted my iPhone and watch several times.

  ..

• Satellite P205D-S7802 - LAN and WLan has stopped working

  Hey all,.

  My problem is that all of a sudden all my network interfaces have stopped working. I don't think that my operating system is the problem because I run linux as well as windows and it does not work in any of the 2. Both my local network and my wireless lan doesn't work, please help.

  It's really rare that two devices; LAN and WLan stopped working and in Linux or Windows, you can use these cards.

  In my opinion, your laptop is OK, but I think that your router to malfunction.

  It would be the most simple and plausible explanation.

  Did you check the configuration of the router?

• Keyboard and touch pad stopped working on Satellite L750

  My laptop L750 keyboard and touch pad stopped working on start up. I now use a USB mouse and on-screen keyboard to do anything either. I have tried several things to fix, but nothing seems to work.

  I've updated keyboard drivers, tried related work key, updated and run antivirus software and restored to a point in time before the show. Still no luck.

  Any ideas?
  Thank you

  Keyboard drivers?
  Can you please send the link to download? It is unclear to me that the own keyboard driver.

  In any case, can you use keyboard and touchpad if you start the operating system in safe mode?
  Are you using the original pre-installed OS that you got with your laptop?

• Speakers have stopped working after the flash BIOS updated for Windows 8

  I had recently changed the OS of my HP Pavilion dm4t-2000 for Windows 8. After that an update of the BIOS flash me suggested by HP Support Assistant, speakers have stopped working. I tried to reinstall the Audio Codec, but it does not work. Could someone help me please?

  jaikvk,

  Go into Device Manager and uninstall the sound and restart the computer. This will reinstall the driver once more.

  Also, it could be a bad installation of the BIOS; You can go to HP.com and re download the update of the BIOS.

  Let me know if it helps.

• Bubbles screen saver and angry birds stopped work unsupported opengl2

  Bubbles screen saver and angry birds stopped work unsupported opengl2. I've updated my vidieo driver. I use a NVIDIA GForce 8400 GS. Everything worked when I close the screensaver computer downstairs but when restarted and AB does not?

  Hi Ranmorg,

  Thanks for choosing Microsoft Community!

  If I understand correctly, you have problems playing angry birds and changing the screensaver on a Windows Vista-based computer.

  Method 1: Let us try the following steps:

  a. open the screen resolution by clicking on the Start button, click Control Panel and then, under appearance and personalization, select adjust screen resolution.

  b. click on advanced settings, select troubleshooting and then click on change settings.

  c. move hardware acceleration up to activate the video hardware acceleration.

  d. click OK and then click Restart now.

  Method 2: Uninstall and reinstall the video card drivers and see if this is useful:

  See the following steps:

  (a) click Start, right click on computer.

  (b) click on properties, click on Device Manager

  (c) expand the graphics card, right click on the adapter option

  (d) click on uninstall

  (e) now go to your computer/device manufacturer site, download the updated drivers and install them.

  Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.