PS CS6 and Windows 8 graphics issues

Hello!

I have recently upgraded to Windows 7 Windows 8 Pro and I've noticed a few graphic problems in CS6. The flickering background, the image turns black, etc. After a little searching I found others who also had the issue. (Here and here). I also read the blog post by

Hi Linda,.

Yes this is all related to driver problems with the fall of ATI 12.10 and impacts Psalm in opting for the basic mode, color management is managed on the CPU, and you may see an impact on performance with OpenGL rendering (3D on-screen interaction, I think requires the Normal parameter or advanced).

Kind regards

Steve

Tags: Photoshop

Similar Questions

  • HP Pavilion p6330f and Windows 8 - firmware issues as possible

    Hello!

    I installed Windows 8 on my (greatly improved) p6330f... and I have a few problems that were fixed with updates of the firmware posted on the page for this model of computer.   I installed the updates of the firmware under Windows 7, and there is no version of Windows 8 updates.

    Here are the updates that are on the page-

    BIOS: fixed fan speed< i="" am="" having="" this="" issue="" again="" while="" running="" windows="">
    SATA hard drive update: data is not properly registered< i="" am="" having="" this="" issue="" again="" after="" running="" windows="" 8="" (especially="" with="">

    New versions of the firmware we will post for Windows 8, or I come to Windows 7?   Please advise...  I updated all parts of this machine in addition to the motherboard and processor (16 GB DDR3, 2 TB drives, AMD Radeon HD, the new power supply graphics card) and I have tweaked Windows 8 to a point where I like it so I don't want to go back to Windows 7.

    Thank you.

    card BIOS update mother MS-7613 and the SATA hard drive Firmware update has been permenently wrote in the BIOS of the computer chip and the chip of the firmware of the hard drive. The updates actually changed the code in hardware and change the operating system will not cancel these changes. The BIOS/firmware updates are still part of the material regardless of the currently installed operating system. The reason why HP lists updates that are compatible with Windows 7, because their installer has only been tested for use with Windows 7 and the controls to see that Windows 7 is installed before upgrading the system.

    No update of Windows 8 will be available for your computer because of his age. You can check your BIOS version to verify that it is still in the v5.15 and you can do the same for the hard disk and make sure it is "BX". Other than that, the computer is not supported by HP for use with Windows 8 and HP will not provide drivers or updates for the computer.

    BTW... I see that you have two of the same post... label, and the forum rules dictate a single post for a specific subject.

    Please send Bravo

  • can I use a touch screen with photoshop CS6 and Windows 7

    I need to define specific image areas to make a binary image of the organelles in an electron microscope of a cell. It would be much easier by using a pen as a mouse. Can I fix a touch screen to my computer monitor and use Windows 7 and Photoshop CS6?

    Hello George,.

    If I myself remember well touch sensitivity was introduced with Windows 8 and improved in point 8.1, so I doubt if a touchscreen monitor would work. You could easily use a graphics tablet, but enjoy the extra convenience of drawing on a screen with a science-based application.

    Hope that helps

    Terri

    PS you have a name very famous Professor George Porter was an English Nobel Prize chemist a few years ago - I had the chance to go to one of his at the Royal Institution Christmas lectures, a very clever man.

  • PrintMaster and Windows 7 compatibility issues

    I have windows 7 and you can't use my printmaster Version 18, and I can't seem to load.  He said that the program has some compatibility issues with Windows 7.  How can I get around this?  Are there patches for this yet?      Thank you, Nicole

    "The Publisher offers a paid upgrade to a compatible version."

    Visit the Publisher's website
    http://www.broderbund.com/store/Broder/en_US/PD/PrintMasterreg_Platinum_18/ProductID.164351300

    Windows 7 Compatibility Center
    http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type=Software&p=PrintMaster%20Platinum%20Edition&v=Encore&uid=18&pf=0&pi=8&c=Hobbies%20%26%20Personal%20Improvement&sc=all&os=32-bit

    Make older programs in this version of Windows (Windows 7)
    http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

    Have you tried right clicking on the Setup .exe and option by selecting "Run as Administrator"?

    What version of Windows 7 use you?

    Windows Virtual PC
    Download Windows XP Mode
    http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

    Windows XP Mode (Windows 7 only, but not one of the Home versions) "you are not eligible to download Windows XP Mode. You must have Windows 7 Professional, enterprise or full to run Windows XP Mode."

  • Championship manager 2001/2 and windows screen 8 issues/conflicts?

    I have the 2001/2 Championship Manager, I have a new laptop to windows 8, the problem is that it will load and play, but it's the old format 4: 3 and not in full screen.  why and how can any ideas I fix this?

    Hi Simon,.

    Welcome to the Microsoft Community and thank you for the post in there.

    Looks that you are unable to play the Championship manager season 01/02 on your computer with Windows 8.

    Please provide the following information.

    (1) do you get an error message when you try to play the game on your computer with Windows 8?
    (2) have you been able to play the game properly on your computer?

    I would like to inform you that now we have enough information on the compatibility of the game Championship manager season 01/02 with Windows 8.

    http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win8&Locale=en-us&TextSearch=Championship%2Bmanager%2Bseason%2B2001%252f2&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibilit y=Unknown&LastRequested=14

    You can install the game in compatibility mode with the previous version of Windows. You can follow the steps in the link here.

    Make the programs more compatible with this version of Windows

    http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

    Change the resolution of the screen from the game settings and check the issue. If the problem persists always post your query to the address given here.

    http://forums.championshipmanager.co.UK/

    I hope this solves your problem, please do not hesitate to write us if you have questions related to Windows.

  • Dreamweaver CS6 and Windows 10

    Dreamweaver CS6 is the ONLY software / App, which does not work on Windows 10 throughout the Master Suite... WHY?

    I even downloaded the standalone Dreamweaver CS6 - windows 10 installed on a clean disk and installed the Dreamweaver CS6 trial just to see if maybe something stopped working. Same thing has happened - Dreamweaver opens then closes.

    Problems shooter guide told me that the solution was to get Dreamweaver CC... This is unacceptable.

    $20 a month just for the Dreamweaver CC (I hate that some features have been removed - without going into the details about this... Adobe know what they have done)

    Adobe should remember their customers of the outdated years... What is the day of Joomla and Wordpress? (Fool, tools)

    Need a fix for this to get my beloved Dreamweaver CS6 works again. (Oh I tested CS5.5 the same way as above... same thing... opens then closes)

    Final result, CMD (as Admin) - sfc/scannow solved the problem. CS6 work.

  • Operating system. We have first Pro CS6 and Windows 7 32 bit. It will not be installed

    Dell laptop Latitude 6420

    Windows 7 Professional

    8 GB Ram

    A user in PR must use Adobe first Pro CS6. However, when we tried to install the program is grayed out and displays a warning icon. If I hover over there is a message that says that he prefers the 64-bit. Rather not say will not work in my opinion. However it will not be installed.

    I read that first Pro is 64-bit on another web site. Is this true? There must be a solution.

    On the Adobe site, I saw that the installation of CS4 first was the work around, but you must purchase a license key. We have already purchased the Premier Pro and have no money in the budget to buy an old product when it should work.

    Help, please. I'm under a lot of pressure to solve this problem

    James

    Premiere Pro CS6 is a 64-bit software and will only install on a 64-bit computer. There is no way around that.

    64-bit Windows required. After Effects and Premiere Pro CS5.5 and CS6

  • Satellite A210-14 and Windows 7 - driver issues

    Jyn

    I use the Satellite A210 + 14 years with Vista at the moment, but I want to install the Windows7 in next time.
    But in the list of supported models is not Satellite A210 Series (http://aps2.toshiba-tro.de/kb0/TSB9902P50000R01DE.htm) is there no Driver Support for Windows7 and the series A210, or would the A210 don't run with Windows7?

    I found on the website of some drivers (http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU) but I think that these drivers for all the hardware? I've read anything about SDcard touchpad driver or driver chipset drivers...?

    Thanks for your replies

    Sebastian

    Hey Buddy

    Don t worry!
    All you will get for Win 7!

    I installed Win 7 on my A210 and Win 7 recognized most of the devices.
    In addition, I installed the VAP (additional package) for Satellite A300 and installed the support flash Cards out to Satellite L500 utility. The flash card tool is important for the FN keys.

    WLan, LAN and graphics driver have been recognized by Win 7.
    But you can also use the Win 7 driver automatic installation option in the Device Manager, choose the device, and then choose Update driver
    The first option will allow you to search for a driver updates automatically option s nice!

  • InfiniTV of ceton CableCard and Windows Media Center issues

    DEll computer - Intel Core i5 - 2500 K CPU @ 3.30 GHz; Windows 7 Ultimate/SP 1; GIGABYTE GV-R687OC-1GD video card installed. Monitor Dell 2407; WMC; Ceton InfiniTV PCLe.  Cable has been verified to the strength of the signal; Ceton diagnoses reveal cablecard detected; validated; Authorization CP has received and the use of the "premium" channels Question: Sometimes an error message appears indicating that my display or video card is not HDCP or no service for that channel.  When I tune a HD channel and either of these two messages, I minimize the WMC screen and then blow it up and the channel is tuned.  This does not work for strings.  Sometimes I'm not able to fix anything until I have reinstall through WMC, once again the Ceton Tuner.  And then, if I am able to do all my channels, I lose them again once I left WMC and enter it again.  I never know if I'll be able to show the programs or not.  Any ideas?

    There's a thread similar to Experts-
    you might want to look at this thread and start a new one here yourself.
     
     
    Barb
     
    MVP - Windows/entertainment and connected home
     
     
    Please mark as answer if that answers your question
     
     
     
     
  • Standard CS6 and windows 10

    have standard cs6, I want to upgrade to windows 10. have a hp elitebook.  standard cs6 will work with windows 10?

    Yes

  • Zoo Tycoon 2 and Windows Vista compatibility issues

    I looked at the literature available online to resolve the error message "insufficient system memory". I rund the dxdiag and I have 8 GB of memory, and the system requirements are displayed as "256MB".  I'm trying to understand the best next step.  Recommendations

    Hi Se_nuss,

    You can click on the link given to check the system requirements for Zoo Tycoon 2 and see if they match the configuration of your system.

    http://support.Microsoft.com/default.aspx/KB/309693

    Alternatively, you can try the following steps to help resolve the problem:

    1. click on start and type system in the box Search and then click System in the programs list.

    2. click on Advanced system settings.

    If you are prompted for an administrator password or a confirmation, type the password, or click allow.

    3. on the Advanced tab, click settings under performance.

    4. on the Advanced tab, click change under virtual memory.

    5. Click to uncheck the box automatically manage the size of pagefile for all readers .

    6. under drive [Volume label], click the drive that contains the swap file that you want to change.

    7. click on System managed sizeand then click set.

    8. click OK twice.

    9. in the System Properties dialog box, click OK.

    10. When you are prompted to restart the computer, click restart now.

    Hope the information helps you to solve the problem. After back and let us know.

    Thank you & best regards
    Ashish Gupta - Microsoft Support

    =============================
    Calm sea never make skillful sailors!

  • I need help to round the corners PS CS6 and Windows 7

    Hello

    I searched, watched videos and more to try to find a way round the corners on my picture. I followed that statement were available and still no luck. I will describe what I've done.

    Goal: Rounded corners on photo 960 px x 250 px for a Web site. RADIUS 35 px. Photo size already the way I need it. Background should be transparent saved in png format 24 therefore shows nothing except the picture with rounded corners.

    First step:

    I insert image in Photoshop

    1-insertimg.png

    Second step:

    Use the rounded rectangle tool:

    2-roundedretangle.png

    Step 3:

    Move the layer of the photo to the top of my rounded rectangle layer

    3-photolayertop.png

    Step 4:

    Clip line Alt + Enter between the layers: I get anything other than transparency.

    4-clip.png

    Step 5:

    Merge visible layers. Still nothing.

    5-mergevisible.png

    Any help would be appreciated.

    Thank you

    Ensure that the vector mask empty targets before you draw the rounded rectangle. It must have been automatically when the layer is added, but you can target it at any time by clicking on its thumbnail to the right of the thumbnail of the layer in the layers panel.

    In addition, Cmd/Ctrl-click on the Add button hides at the bottom of the layers panel is the same as layer > vector mask > reveal all.

  • I can install Illustrator CC with Photoshop CS6 and Indesign CS5.5 or can I have some compatibility issues? I use Windows 7. Thank you...

    I can install Illustrator CC with Photoshop CS6 and Indesign CS5.5 or can I have some compatibility issues? I use Windows 7. Thank you...

    Generally, it should work, but of course there may be problems of occasional compatibility through different programs and their different versions.

    Mylenium

  • T400 with switchable graphics and ATI graphic issue Windows 7

    Hi all

    I wonder if someone found work drivers to switch between integration and the ATI graphics we.  The problem I have is that I installed once the drivers for Windows 7 Beta and it worked well, except that I do not have screens on for brightness and press mute do not work (although the volume keys worked)

    Now, after you install an update for the ATI driver, I got the poster on the screen and the button mute to work, but I can't change the brightness when using the ATI graphics card. ATI has a beta version for the operating system win 7 on their site, but later, they can do they recommend to go to the site of the manufacturer of the laptop.

    On the site, I downloaded all the possible drivers without success (and once I got a blank screen after loading windows... I had to boot into safe mode and remove all the ATI drivers for the view at the beginning upward) so I use now on the integrated graphics card and it works fine but if I switch to the ATI I run the risk of not being able to change the brightness but also not being able to return to the integrated graphics card (he told me to close all 3d applications and video before moving on when it there) was nothing to open)

    Everyone knows a problem similar to mine? I ran out of options on the lenovo site, so I don't know what to do now. New drivers any time soon?

    Best,

    Max

    Fixed a problem!

    The BIOS update was necessary. Now I got it all work! I was wondering if it might affect when I saw earlier. I got it. Thanks for all the help.

    Now, I'm trying to solve the problem of Win 7 explorer.exe suspended due to a 3.9 GB tif file...

    Thanks to you all.

    Best,

    Max

  • PhotoShop CS6 will work with screen tactile Dell and Windows 10?

    I'm looking to replace my Dell laptop with a 15.6 laptop "series of Inspiron 5000, which has 16 GB RAM 1 TB HD, Intel i7 processor and an AMD Radeon R5 M335 4 GB DDR3 video card.  It is a touch screen with Windows 10.  In talking with Dell technical support, I was told that PhotoShop CS6 FONCTIONNERA NOT with Windows 10 not with the touchscreen even though technology Adobe said it will work with Windows 10 on its "required page.  Dell said that it works with WIndows 7.  I'm confused.  The Adobe forums seem to suggest that Photoshop CS6 will work, so with touch screen and WIndows 10, is there something in the specifications of laptop above Dell that suggests that I'm having a problem?  Will it be buggy?  PhotoShop CS6 will work only with a mouse and not the touch screen?  Is this a problem with the video card? I can't find enough information to feel confident about ordering this Dell laptop forums.  I can go to the 7000 series with a 4 GB NVIDIA® GeForce® GTX 960 M graphics, but I'm not a gamer.

    CS6 works fime on my Dell workstation.

Maybe you are looking for

  • Firefox won't let me open other windows even my trusted sites, which can do to fix this?

    When I check my email tickets and places of work that I will I know they are approved, but whenever I click on the link, a message appears saying Firefox prevented this page automatically redirecting to another page. What can I do to stop this? It is

  • fine control "zoom."

    People - looking for a way to precisely control an image magnification in a container of Vision.  So far, I have only to find IMAQ WindZoom which seems to work only on windows outside and around a zoom factors of 1 to 16.  Considers that the image si

  • New T5i with a video problem

    I received a new Canon T5i mailed the week last of Ritz camera.  At first, everything seemed splendid; It was an upgrade for me to an old XTi and I practice with this camera so that I can cover the launch of the NASA of the week with her next. This m

  • Setup of the installation on a F4580 wireless

    Everything was fine, then we went home and now is not.  (Same router computers Virgin even different printer)  I tried the printer setting from page 5 of the instructions.  I push button WPS for two seconds the yellow flashing then I push the button

  • Peripheral Bluetooh has stopped working... Windows Vista

    To my Panel, 'hardware and sound' folder is missing and built-in Bluetooth device has stopped working... My operating system is Windows vista, my PC is Dell Inspiron1525... pl help