PS Series Firmware 6.0.1

Has anyone started using 6.0.1 still in production?  I'm leaning towards the upgrade to this version, I just want to know if someone is using this version and if any problems have been noticed.

Thank you.

Lanman1204,

I spoke with a number of clients and even assisted in some real day to 6.0.1 updates and everything went smoothly. As long as you follow the proper procedure in the process of upgrading you should not have problems. Please let me know if you have any questions or other concerns about the firmware update process.

Tags: Dell Tech

Similar Questions

  • HP LaserJet 2300 Series Firmware update failed

    Hi all

    After that I loaded a new firmware for my printer it still keeps asking me to install the new firmware. There is nothing else I can do with the printer. I (tried) to install the firmware over the network.

    When I run the printer the display shows the following:

    "Download file now" - Download now
    "Return the RFU upgrd" - send rfu upgrade

    Before the error, I followed the instructions in the Readme attached the new firmware and sent the command ' copy/b lj2300fw_04.050.2.rfu \\i7\hplaserj' to the printer on the network which confirmed that "1 file (s) copied".

    The printer does not respond to Windows or Mac OS all over and is shown as offline in Windows.

    When I try to reload the firmware there is simply nothing but I still have the confirmation "1 file (s) copied"

    Thank you in advance for your help!

    To get your question more exposure I suggest you post in the trade forums since it is a commercial product. You can do it at Business Forum.

    I hope this helps!

  • Download the Release Notes for v7.1.7 PS Series Firmware does not

    I get an error "403 - Forbidden". Anyone got these and attach them here or provide me with a working link?

    I worked with the people involved with the site.  Quite frustrating for all involved.

    I just downloaded the release notes of the House without any problem (numbers)

    When you call support they should offer to email the release notes, because they are small enough to attach.

    Here are the patches for 7.1.7/7.1.6 at least.

    Kind regards

    Don

  • I need service-firmware for Toshiba 32RL938G

    Hello

    I need auto firmare starting at the 32RL938G of Toshiba, the screen is black, green led. Do not start buttom...
    AutoStart for VL Series firmware does not...

    Please help me,
    Andrea.

    What nobody could help me?

  • Impossible to update firmware (CM1410) 20131028 - no RFU on Service menu CM1415fnw

    I have trouble to update the firmware of my printer.

    Model CM1415fnw

    Type of connection without wire/Hello

    Service ID 21094

    FW Version 2010-11-25.

    Driver HP LaserJet CM1415fnw 1.0 Version

    Product number CE862A

    I am connected via a MacBook with OS X 10.9.2. I have Parallels Desktop 9 installed under Windows XP.

    I downloaded and installed the latest driver for my computer.

    HP LaserJet Pro CM1415fn color MFP series Full Software Solution - OS X 10.9 Mavericks2014-01-31, V...

    I downloaded the Mac firmware update. File name: CM1410_MFP_Series_FW_Update - 20131028.dmg [1/1, 48.86 M] Version 20131028. When I try to run the update of the firmware on Mac, I get the error message "cannot open"HP Firmware Updater". You must eject the disk image. "Preferences | Security | Allow applications downloaded from anywhere. I tried to download the update several times, in the event that a download has been altered. Did not help.

    I downloaded the firmware from the Windows Update. File name: CM1410_MFP_Series_FW_Update - 20131028.exe [1/1, 12.12 M] Version 20131028. When I run the update of the firmware in Windows, the "HP LaserJet Professional CM1410 MFP Series Firmware Updater 20131028" program runs in a window. I am able to choose my printer "HP LaserJet CM1415fnw (41 d 33)". I click on the Firmware 'send '. The 'Progress' bar shows the progression up to the end. I click on "Exit". But nothing happens on the side of the printer. And the firmware information remains the same.

    Hi frustrat10n,

    I understand that you can not update the firmware of the printer.

    I'll be happy to help you.

    There is no RFU on this printer. Just continue.

    I checked the site and it is not an update of the firmware that you can run on 10.9.

    I would say for temporarily, connect the USB cable and try upgrading the firmware on a PC or a computer with 10.8 or less.

    It might work if you are using bootcamp on side windows, but probably not by parallels.

    Why do you need to update the firmware of the printer?

    You have problems?

    I hope this helps.

    Thanks for posting on the HP Forums.
    Have a great weekend!

  • LSI MegaRaid 9261-8i drowngrade firmware

    We recently had a failure of the Raid Controller on a C250 M1 with Oracle Solaris Server (Yes, I understand, it's old :)).

    The replacement raid controller a lot a more recent firmware, which seems to cause the Solaris to panic at the start.

    Is there a procedure to downgrade the firmware to the same firmware as the failed controller which is 2.120.133 - 1322.x.

    any advice is welcome.

    Thank you

    Hello

    You would most likely want to run the HUU for any server to review the C series of the firmware running. The HUU is the host, an ISO bootable upgrade, utility which allows to manage the C-series firmware.

    You should be able to find the appropriate here HUU.

    https://software.Cisco.com/download/release.html?mdfid=283862070&flowid=... (3 x) = AVAILABLE relind & rellifecycle = & reltype = last

  • Wireless no longer works on the range of HP CM1415fnw multifunction printers

    I don't know when this problem started, the NETWORK card in the printer wireless seems to connect to the network, but there is no communication. He may have started with the last update of the firmware, but I'm not positive. I reapplied the last firmware that did not work.

    I can see on my access point that the printer is connected successfully. If I plug in an ethernet cable, everything works correctly, so the network configuration is correct.

    From what I found, it seems that you can not downgrade the firmware. Before calling HP, anyone seen this before or have suggestions?

    Thank you

    James

    Lets first make sure you have the firmware update installed. Here is a link to the new firmware released in 02/2012: HP LaserJet Pro Series Firmware Update Utility , it appears there were some fixes network included in this package.

    According to perform a power reset the printer:

    1. Press the power button ( ) on the HP product to turn it off.

  • Impossible to activate the HP Web services for my HP Laserjet 200 MPF M276nw color

    Kindly help, I tried to update the firmware, but still my web services will not turn on.

    RGS

    G

    Hi GayleneC,

    Thank you for the update and additional information.  I really appreciate it.

    You indicated that you tried to update the firmware, I wonder because the printer is not connecting to web services that is may not have logged in to check the updates of the firmware.  I have included two links, one is for the Windows of HP LaserJet Pro Series Firmware Update Utility version , the other is for the Mac version of the HP LaserJet Pro Series Firmware Update Utility. Please choose your operating system and we will try and update the firmware without using the front panel of the printer.

    After you run the firmware update utility, please disable IPv6 wireless via built-in web server.  Please follow the steps below:

    1. To open the HP embedded Web server, type the IP address of product in a Web browser address line. When it opens, it should look like the screenshot below.

    2. Please click on the 'Network' tab as highlighted in the screenshot above.

    3. Please click on 'Advanced' in the side menu on the left as indicated above. Please disable IPv6 and click 'apply '.

    4. Please click on the "HP Web Services" tab.

    5. Please click on the button "activate". Print the newsletter of Web Services.

  • HP deskjet 2540: stop page print quality and 'use printer wireless without router' printing

    After installing the hp deskjet printer 2540, all operating systems (vista, windows, mac os, windows 8) correctly printed.

    I would like to prevent the printing of print quality page whenever the printer is on and to prevent print also the page "use printer wireless without router" (it would be better not to waste the ink).

    Thanks for any help you can provide

    Hi there @lesart55.

    Welcome to the HP community!

    I have seen your post on how your Deskjet 2540 prints a page of print quality every time that the printer is on, and also the page "use printer wireless without router" is printing.

    I'll start with the PQ page that prints at the start of the printer, as it is normally a sign of a hardware problem with the printer.

    Try to update the firmware on the printer. Here is the link to download and run the update using a USB connection to your Vista system: HP Deskjet 2540 series Firmware update

    Try a reset of the power to the printer and make sure the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on and can help greatly.

    Press the power button to turn the product on.
    With the product, unplug the power cord from the back of the product.
    Unplug the power cord from the wall outlet.
    Wait at least 15 seconds.
    Plug the power cord into the wall outlet.
    Reconnect the power cord to the back of the product.
    If the product does not light by itself, press the Power button to turn it on.

    If the PQ page always print after you are done troubleshooting, try the steps outlined in this guide below. I looked at the steps that I see would take place in the tent for your specific problem and chose the steps following, Please do not take account of the actual title.

    An "Incompatible cartridge or"Missing cartridge"Error Message is displayed for HP Deskjet 1510, 2540 Deskjet, HP Deskjet Ink Advantage 1510 and Deskjet Ink Advantage 2540 all-in-One Series Printer"

    I hope that the problem has been cleared up for you at this stage. If this isn't the case, please call us directly to discuss your options of the printer!

    Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  • LaserJet Pro M127fn MFP: Stuck "print fax page 1.

    I had to receive two pages of fax. After that the first page has come through it is stuck "print fax page 1. The second page is never good. I can't print anything. I already disconnected my printer and plugged in. When the rear connection, it uses the same throughout first fax page and gets stuck again. Happen from nowhere at least once a week for the past few weeks.

    Hi @cvsc ,

    I see that you are having problems with the printer stuck in an "Print fax page 1" error message when you restart the printer, it keeps printing the same fax. I would really like to be able to help solve this problem.

    I would like to do a hard reset to see if that will solve the problem. It's probably a little different then what you have already tried.

    Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
    Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
    This ensures that the printer is full on and can help this situation.

    I would say for updating the firmware of the printer. Here is the link just choose your operating system and select the firmware download. HP LaserJet Pro MFP M127/M128 series Firmware update.

    If you're still having problems, try to reset the printer. I'll send you another step to try in a private message to try.
    In the forum next to your handle name simply click on the envelope to see.

    If you need help, let me know.

    Good day!
    Thank you.

  • LaserJet Pro M127fn MFP: Stuck on "Print Fax Front Page.

    This MFP is stuck with the message, 'Printing Fax Page One' I've tried the reset instructions are on the forums, but cannot get rid of this message. Is there a reset 'hard' or 'factory' I can do? Thank you

    Hi again,

    I would say for updating the firmware of the printer.

    Here is the link just choose your operating system and select the firmware download.

    HP LaserJet Pro M127 MFP series Firmware update

    Make sure that you scroll to the Firmware section.

    See if that helps

  • 4500 envy: Envy 4500 copy

    Hello

    Had my desire 4500 for 8 months with no probs, but this week it won't copy. It says it is and goes on copy but sticks there with the flow of progress bar, but nothing happens. I ran troubleshooting, I checked the paper and inks. I unplugged (it does not turn off) and put it back. Nothing works.

    Hello! Welcome to the HP community @M47hew,

    I came across your post on the questions to copy your craving 4500 is seen, and I wanted to tender hand with my suggestions.

    Click on the link below and try to update the firmware on the printer. Also make sure after a power reset, that main power is connected directly to a wall outlet to avoid power bars and surge protectors. If the error persists, contact HP to discuss a replacement for the printer or trade.

    Update to improve performance of the printer HP Envy 4500 series firmware

    Click on the thumb to below testify my help!
    Click on the "accept as Solution" if I'm you guide to a solution!

    Contact HP:
    Step 1. Open the link: www.hp.com/contacthp/
    Step 2. Enter the product number or select Auto detection
    Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
    Step 4. Scroll down and click on: contact HP options - click Get phone number
    File number and phone number appear

  • Want to 4500 All in One Printer: Envy 4500 and Photo paper

    Recently, I tried to use my 4500 want to print photographs, using HP Premium Plus Photo paper. Each attempted printing resulted in the printer telling me that there is a paper jam. I would open it upwards, remove the paper (which has never been really stuck - just looks like he started getting into the printer and stopped) and try again... Paper jam. I don't have the paper in the tray - went out my plain paper. I am able to print correctly on plain paper, but it won't take photo paper. Any ideas on how to solve this problem?

    Hi @kpdevlin,

    Welcome to the Forums of HP Support!

    I see you are trying to print a picture on your craving 4500 All in One Printer and it keeps blocking. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    Looks like there could be a problem with the rolls of paper, print settings, or the paper tray.

    Please work your way through this guide to see if you can solve the problem, a 'Paper jam' error on HP ENVY 4500 e-all-in-one HP Deskjet Ink Advantage e-all-in-one 3540 Printer series.

    Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

    You have a photo that you can try to make a copy of, as a test? It would be to help eliminate the printing as the cause.

    Please make sure that the paper type/quality settings are correct, for more information, please see this guide. HP ENVY 4500, printer Deskjet 3540 - change the Mac OS X print settings.

    In addition, if you have access to a Windows computer running Windows 8.1 or earlier, it is an update of the firmware available for your printer. HP Envy 4500 series firmware upgrade to improve the performance of the printer.

    If you have completed all the above steps and your product still has a problem, service the product.

    Contact HP for service in all countries except Asia-Pacific.
    First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
    Cost of repair out-of-warranty printers may apply.
    What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
    Step 1. Open the link: www.hp.com/contacthp/
    Step 2. Enter the product number or select Auto detection
    Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
    Step 4. Scroll down and click on: contact HP options - click Get phone number
    File number and phone number are displayed.

    Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

  • HP Envy 4500: vertical dark lines on copies

    Printing is fine. Printing/scanning ran doctor-all ok. All copies have dark vertical lines from left to right through the entire page. Have cleaned the glass, any ideas? Thank you.

    Hi @maggiethewif,

    I see you have found dark vertical lines on copies. I will definitely do my best to help you.

    I would like to do a hard reset to see if that will solve the problem.
    Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
    Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
    This ensures that the printer is full on and can help this situation.

    Clean the glass Strip to the scanner ADF ADF white plastic strip, the scanner cover and the scanner glass.

    Update the firmware of the printer. HP Envy 4500 series firmware update to improve performance of the printer.

    If the problem persists, please Contact the HP Support for help. Check the model number and the form to receive a file number for faster assistance.

    If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

  • HP MFP M127fw Pro: Problem with scan/fax and adf on HP MFP M127fw Pro

    After that I faxed a couple of pages, the device does not work. Now, when I want to fax, he asks me if I want to scan from the plateau, even if I fed the ADF with the paper. When I want to scan, it says "Calibration."... "for a while, but nothing is happening then. It receives the fax and print documents. I unplugged the cable of electricity for more than 60 seconds, downloaded the new drivers from the HP site and installed, but it did not work. Could you please help?

    Best,

    Farrokh

    Hi @Habibzadeh,

    Welcome to the Forums of HP Support!

    I see that you are unable to fax and scan with your printer HP LaserJet Pro MFP M127. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    I can understand the frustration you are experiencing. Whenever the printer is calibrated, it will not be able to do anything until it is complete.  We must determine why it is calibrated.

    I see that you updated the drivers, but you updating of the firmware of the printer?

    • Click here for the HP LaserJet Pro MFP M127/M128 series Firmware Update
    • Make sure that the printer is connected directly to a wall outlet (do not use a bar or a surge protector). This ensures that the printer is full on and can help this situation.

    The printer may need maintenance, please use this guide to help you determine the cause:

    You use Genuine HP Toner?
    What are the levels of toner?

    Note: HP recommends you to use genuine HP cartridges. HP does not guarantee the quality or reliability of cartridges HP cartridges refilled HP. If you use genuine HP, the following cartridges no can not solve the problem.

    If you have a faulty cartridge, it might be under warranty. To check the warranty on your ink supplies, go to hp.com/go/learnaboutsupplies, select your country/region, and then check the information of limited warranty for your supplies.

    If you have completed all the above steps and your product still has a problem, service the product.

    Contact HP for service in all countries except Asia-Pacific.
    First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
    Cost of repair out-of-warranty printers may apply.
    What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
    Step 1. Open the link: www.hp.com/contacthp/
    Step 2. Enter the product number or select Auto detection
    Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
    Step 4. Scroll down and click on options contact HP - click Get phone number
    File number and phone number are displayed.

    Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

Maybe you are looking for

  • Satellite L30 cannot recover

    Note before reading: my default screen is broken COMPLETELY in many places and unusebale HelloI encountered a major problem with my L30, the other end of week, I tried to restart with the restore disc, but after unpacking the finished disc, he asked

  • Auto brightness

    Does anyone know of a built-in feature of the Lenovo Ideapad Y580, that will automatically change the brightness of the screen based on the ambient room lighting? Some other reference messages will the Lenovo Energy Management program, however on my

  • Z1: issues installing Windows 10 on Z1

    Trying to update my Z1 (G1) to 10 Windows with a clean install. I tried to follow the steps described in the following article: HP - upgrade to Windows 10 workstations;  However, all attempts make changes in BIOS in "Steps to take before upgrading" h

  • Startup-Configuration of backup to Disk0:

    Hello together, I want to back up my configuration of start-CAT6500 to disk0: flashcard and that you want to save the config file with the actual timestamp in the config-file-name on disk0: In what follows the syntax: Event Manager applet backup_conf

  • Best "workflow" for Sony A7sii and GH4 - Res Pro or DNxHD?

    Hi allI'm filming a documentary of 90 minutes on a Sony A7sii like Cam 1 and a Panasonic GH4 camera 2. 23.97fps to 3840 x 2160. We need to have 4 k options for future use. We will very likely use a certain amount of purchased both action sequences. I