PSAA9 satellite A100 - unable to browse the Internet

Hello

I reinstalled the operating system on a friends computer laptop A100, installation of WINXP pro.

After I installed, I noticed that a lot of missing drivers so I scoured internet and downloaded most of them. The problem I have is that the ethernet connection seems to not work properly. I installed the driver on the toshiba site and hooked it up to a test network to my polytec.

On this network to test an internet connection is available, but the laptop cannot browse the internet! I can ping other PC networking on mobile Internet sites and ping but cannot browse their IE. Other network PC cannot ping the laptop automatically obtained IP address.

Any ideas what's happening?

Hello!

Have you tried another browser like Firefox? I don t use IE because Firefox is much faster and I can't get a large number of modules.

In addition, you should try to disable the firewall on the laptop. Maybe it s blocks the internet connection or the internet browser.

Last but not least try to use a static IP address. You can change this in the TCP/IP settings.

Tags: Toshiba

Similar Questions

  • Unable to browse the internet for the VPN (ASA5505 running 8.3)

    We have improved our ASA 5505 to 8.3 firmware image (2) and we have a working VPN configuration (customer VPN in Windows can connect and browse the network of the company as well as their local networks [split tunnel seems to work in this regard]).  However, some time connected they are unable to also browse the internet.  In our configuration of 8.2 (1) we have done 'something' to allow remote users to browse the internet at the same time, but apparently this is not transferred in the upgrade.

    I'm sure it's a simple nat our order routing, but it can't know.  I've gotta hit the road now but will post our config this afternoon if no one knows the "secret" to do.  Ideally, internet traffic to remote users out of their internet connection and not be achieved through the office.  We understand the risks associated with it.

    Hi Scott,.

    To the best of my knowledge, I don't think that l2tp over IPSec supports split tunneling. If you use the Cisco VPN client, you should be able to get this working.

    What we can do in this case is to set up turn on the SAA for these vpn clients. Please add the commands to run below:

    permit same-security-traffic intra-interface

    network of the NETWORK_OBJ_10.0.0.0_27 object

    dynamic NAT interface (outdoors, outdoor)

    Let me know if it helps!

    See you soon,.

    Assia

  • My Firefox browser is unable to browse the internet

    Hey there! When I use Firefox to browse the internet I just get a screen that reads "it works!" Thoughts? I'm happy to send a screenshot of the screen.

    It started when I installed the module for HTTPS Everywhere.

    Problem solved. Embarrassing, I simply relied on tools "Clear recent history" and all selected. It works fine now.

  • Unable to browse the internet while connected to the VPN

    Hi all..

    It was working fine until yesterday morning... Since then, I am not able to browse the internet it I am connected to the VPN... I get a "Page cannot be displayed" error message... the second that I disconnect VPN, I am able to browse internet... I did not change/facilities to do... help please...

    Thank you...

    Check to see if you can ping by IP address (make sure that the DNS information are properly learnt). Also try setting MTU interface to 1300 in case there is a change within the network of your ISP. What is mode NAT or NAT device not compatible?

  • Customers unable to browse the internet on the router from Cisco 871 K9

    Hello world

    "I just bought my Version of K9 Cisco router 871 running this flash system image: c870-advsecurityk9 - mz.124 - 4.T8.bin".

    I am trying to configure this router for home use, while I can block a part of Web traffic (porn sites, sites of films because of the children), but I realized that I was unable to apply the access list Match-class version url (http host).

    My major problem is still the base of the router config. WAN has a DHCP IP assignment with the 192.168.1.0 network

    The Lan is supposed to have 192.168.3.0 network. IP addresses seem to be properly attributed but not able to ping on the internet router. Local client also cannot resolve DNS. Here is my cofig file.

    Please help.

    Richard #sh run
    Building configuration...

    Current configuration: 1727 bytes
    !
    version 12.4
    no service button
    horodateurs service debug datetime msec
    Log service timestamps datetime msec
    no password encryption service
    !
    host Richard name
    !
    boot-start-marker
    boot-end-marker
    !
    !
    No aaa new-model
    !
    resources policy
    !
    IP subnet zero
    IP cef
    No dhcp use connected vrf ip
    !
    IP dhcp pool Richard pool
    import all
    network 192.168.3.0 255.255.255.0
    default router 192.168.3.1
    domain richardedet.com
    192.168.1.1 DNS server
    Rental 2 0
    !
    !
    !
    !
    !
    !
    !
    !
    !
    !
    interface FastEthernet0
    spanning tree portfast
    !
    interface FastEthernet1
    !
    interface FastEthernet2
    !
    interface FastEthernet3
    !
    interface FastEthernet4
    DHCP IP address
    Check IP unicast accessible source - via rx allow by default 100
    no ip redirection
    no ip unreachable
    no ip proxy-arp
    NAT outside IP
    IP virtual-reassembly
    automatic speed
    full-duplex
    !
    interface Vlan1
    Description Local network VLAN
    address 192.168.3.1 IP 255.255.255.0
    !
    IP classless
    IP route 0.0.0.0 0.0.0.0 FastEthernet4
    IP route 192.168.3.0 FastEthernet4 255.255.255.0
    !
    no ip address of the http server
    no ip http secure server
    overload of IP nat inside source list 101 interface FastEthernet4
    IP nat inside source map route RMAP-NAT interface FastEthernet4 overload
    The dns server IP
    !
    recording of debug trap
    recording ease Committee.2
    access-list 100 permit udp any any eq bootpc
    access-list 100 permit tcp any one
    access-list 100 permit icmp any one
    access-list 101 permit ip 192.168.3.0 0.0.0.255 any
    !
    control plan
    !
    !
    Line con 0
    richard password
    opening of session
    no activation of the modem
    telnet output transport
    line to 0
    richard password
    opening of session
    telnet output transport
    line vty 0 3
    richard password
    opening of session
    entry ssh transport
    line vty 4
    richard password
    opening of session
    !
    max-task-time 5000 Planner
    end

    Hello

    problem is that you have changed the IP address of the interface VLAN 1 from 192.168.1.254 to 192.168.1.1
    If you need to change by default-router dhcp pool:
    Select conf t
    Richard-Edet dhcp IP pool
    no default router
    default router 192.168.1.1
    end

    NAT is also missing:
    Enable
    conf t
    IP access-list standard NAT
    permit 192.168.1.0 0.0.0.255
    output
    IP nat inside source list NAT interface SA4 overload
    end

    Also perhaps you cannot ping the router console PC because the computer's firewall blocks the ICMP protocol. In windows, I'm sure he is blocked by the firewall. Then you can try ping 192.168.1.1 from the PC and it should work.

    Try above changes and then write me if it works, or so we can make other changes.
    You can also post the output of the commands (if this will not work):
    router: ip road show
    router: ping 8.8.8.8 (it should work if your internet provider doesn´t blocks the ICMP protocol)
    PC: ipconfig/all

  • Unable to browse the internet despite being connected.

    Hello

    I seem to be impossible to to connect to the internet using msn, steam, xfire, not even Internet Explorer can connect and yet firefox can for a short period, but even that ends by stops. I don't know if it has something to do with the firewall because I had prior workprograms and add them as exceptions, any ideas?

    I think that it could be down to zonealarm and perhaps truevector, cos despite ZA being installed on the computer it deosn actually seem to do something, I do not have the ZA icon on the taskbar and when I go to Security Center tells me that only Windows Defender and avast! antivirus which act as malware programs of protection, he said not ZA is installed, but is simply disabled.

    Thanks, Gavin

    Thanks to both of them, it turns out that it was TrueVector and ZA, I just uninstall it and its all working fine now.

  • BEFSRU31 - connected to the router, but can not browse the internet.

    Hi, I had this problem in the last three months. I share a Linksys BEFSRU31 with my friend. However, once or twice a week, or even more frequently, the router suddenly ceases to send data to my computer. However, my roommate still receives data. So I'm unable to browse the internet even though I am connected to the router and the router gives me an IP address. The only solution I found to do this is to reset the router, which is annoying, because the router is in my friend's room and I don't like to disturb whenever this happens. The ISP is Optimum Online, and I'm on a cable connection 8 MBit. Can someone help me please this problem? Thank you for your time and your collaboration.

    Message edited by EvilBrownie on 18-01-200708:47 PM


  • Satellite A120 - loss of Performance after browsing the internet

    Hi all, Im currently new on Toshiba laptops, just got my first one. But this question is for my brother. There an A120 laptop with windows xp. His laptop is generally very well outside of slow down after browsing the internet for 5 minutes of the ish. Initially he sails very well, but then all of a sudden slowing down, but it's not just the internet, the laptop everything slows down, turning off takes a lot of time just like any other process. The internet works fine on all other devices, IE. other computers laptops, xbox, mobile phones etc. His ISP has confirmed that there is no problem with the internet.

    Anyone have any ideas? He has already reinstalled XP

    Who knows what's wrong there. Install CCleaner and clean OS every time before you turn off laptop.

    Might be time for a clean installation of the new OS if your brother use it for years.
    You know, we don t know what is preinstalled on it, which is running in the background and what personal configuration on this machine.

  • Screen says unable to access the internet. When trying to navigate.

    I have down loaded the firefox program. It opens correctly to the search page. When I try to browse the internet after typing in my search, the next screen that appears shows unable to connect to the internet. I can browse through Explorer windows without any problem, so I know that I have an internet connection. I made sure that the firewall will allow the fire fox program. At this point, I am at a loss. If it's important, I am running the new windows 8 64-bit. If anyone has any suggestions please let me know.

    If it's the subject: home page, then that is a build-in the page that is not needed and use the internet access.

    One possible cause is security software (firewall, antivirus) that prevents or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

    Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

    See:

  • My 3rd Windows 7 computer is unable to access the computers on the network. "Unable to browse the network", or "the network is not present or not started.

    3 computers, 2 XP, 3 windows 7.  The network is wired and wireless Ethernet.  Wired windows 7 computer can see xp wireless desktop.  no computer can see 3rd xp professional running on the wired computer.  Third computer can acess internet through router wireless, but when accessing NETWORK/MICROSOFT WINDOWS NETWORK PLACES/SET, a message comes back with "Unable to browse the network", "the network is not present or not started.  I can ping other computers.  I ran home and small office set up several times.  The network is protected by Norton Inernet Security.  He can see all computers in the group in its Panel of network security plan.  This system worked to a point.
    I'd appreciate any help you can provide.

    original title: unable to browse the network.

    All computers must be on a working group to see and access on the same network otherswise, you won't have access to each other.

    Pls check your computers under workinggroup (domain name)

    Check if your firewall is not blocking.

  • Firefox is unable to access the internet

    Hello

    Firefox is unable to access the Internet. Internet in the phone works, because all applications in my phone are able to access the Internet. I tried to access several different web pages. Their work. The screen is all black, no error messages appear. The strange thing is that Firefox Sync seems to be able to connect to the server, and I can download plugins.

    Best regards
    Joel Hedestig

    You can try using the beta version of firefox mobile?

    https://play.Google.com/store/apps/details?ID=org.Mozilla.firefox_beta

  • Satellite A100 - will not charge the battery

    Hello

    I have ned to help. My Satellite A100 will not charge the battery. He works the power adaptor for the led indicates charging status, battery shows 1% of loading tatus information, but none does change - no loading any time. When disconnected everything just stops off like normal desktop.

    I've already put battery in and out, made upgrades to the antivir software, makes Toshiba controls, tests, but what ever he did did not any change. If there is no way for restoration of battery how to check what the problem is I have no second battery or AC I can always buy new batttery but I don't know if the old one is broken and weather new would work properly?

    Best regards
    pawelg

    Hi pawelg,

    I agree with the user above. The battery can be charged only up to 500 times, and after that, it must be replaced. I think it's the case now, I mean that everything works correctly on the AC adapter so I think that the battery must be the reason for this.

    By the way: you can buy a new battery to an authorized service provider. ;)

  • Booklet 70CT: unable to browse the network

    I'm trying to connect my booklet 70CT to an existing LAN. I use a Fast Ethernet Linksys PC card in the booklet, connect a Linksys Wireless-G Broadband Router on a LAN port.

    There are two other computers connected to the router network OK. I did all the installation procedures in the manual of the PC card and everything seemed to be working normally.

    When I double click on network neighborhood on the booklet, I get a screen with "Entire network" in this topic. When I double-click it, I have a sign saying "Unable to browse the network."

    Help, please.
    Frank

    Hello

    I searched on the Microsoft Web site to some proposals of solution and found this:
    Unable to browse the network"when you click Network Neighborhood
    http://support.Microsoft.com/kb/260214

    This problem may occur if there is a key to logon automatically in the registry at the following location:
    EntVersion entVersion\Network\Real Mode Net

    It seems that you can solve this problem by deleting the registry location AutoLogon value listed in the section "Cause".

    Also check this:
    Network error (1222): unable to browse the network
    http://support.Microsoft.com/kb/170336

    Good luck

  • HP 15-f003dx: robotic sound on laptop while listening to music and browsing the Internet

    Hello

    I have a HP 15-f003dx and I have problems with the audio driver. Whenever I watch videos or listen to music while browsing the Internet, everything looks like a robot, and it's really bad. I already reinstalled the driver, updated the BIOS and tried the system restore and reformatted. Nothing else has worked.

    Here are my specs below:

    10 64-Bit Windows Home

    Processor: AMD A6 - 5200 APU with Radeon HD graphics card

    8 GB RAM

    Audio: Realtek High Definition Audio

    I'm running out of options. All the solutions to the current problem would be great, thanks.

    Hi @REL1983,

    Thank you for the update.

    I'm glad that the store has been able to solve the problem for you.

    Execution of the troubleshooter is a step I have provided, if you agree that it is your problem, you would be useful to the community by choosing accepted the solution to enable other posters locate information with greater ease.

    Thanks in advance.

  • I have HP PSC 1610 printer, and until recently, it worked fine. Now it prints very slowly and I'm unable to use the internet, although it is printer.

    I have HP PSC 1610 printer, and until recently, it worked fine. Now it prints very slowly and I'm unable to use the internet, although it is printer. What could be the problem and how can I fix it?

    Hi Dee,

    Please contact Technical Support for assistance with your printer HP: http://www8.hp.com/us/en/support-drivers.html.

    Good luck!

    Kosh

Maybe you are looking for

  • Satellite A50 - 109 fan works not properly after the HD upgrade

    Yesterday, I upgraded the HD of my laptop A50-109 of 3 months. The original HD installed in the laptop was (to my surprise) a Fujitsu HD 40 GB 4200 RPM 2 MB cache. So I've upgraded to a Toshiba 80 GB 5400 RPM 16 MB of cache and had to re - install Wi

  • How to add bluetooth to Portege M200

    Hello worldI recently acquired a m200 without bluetooth and intel 2100 b Wlan functionality. I would like know what I do to upgrade to ensure that both bluetooth and wlan 2200 b/g. The WiFi network should not be a problem, because it is a replacement

  • Tab missing in icon editor

    I'm sure I'm missing a tab in my icon editor... Can someone tell me where my lack of tab (forgot the name of it) has been done? Furthermore, I can not synchronize with the icon library OR. The problems occurred today for the first time. After that, I

  • Class not registered (0 x 80040154)

    I'm doing a backup of the system.  and I get the following error message: The backup application could not start due to an internal error: class not registered (0 x 80040154)Please check the configuration of your system and try again. I use Windows V

  • no error message no disc in the disc drive

    is "there is no disk in the drive. Please insert a disk in the drive... »