PSC 1315 all-in-One with Windows 7 (64), SP1, prints too high on the page.

Similar Questions

• PSC 2210 all-in-one: PSC 2210 all-in-one with Windows 10: ok printer but the scanner does not work

  
  

  Hey @Manu37520,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the scanning of your PSC 2210 all-in-one printer to your PC for Windows 10. The printer has no drivers for Windows 10. You will need to use a computer with an operating system prior to analyze.

  Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Is it possible to set up in windows 7 for my printer HP psc 1315 all in one...?

  .. .or is not possible, and it is best to think about to buy a new printer!

  I was wasting far too much time trying to set up many "good drivers" for this device and will never work ok

  My question is simple: "there is a device that works well with HP psc 1315 all-in-one Windows seven?

  Thanks in advance ;-)

  Peter

  IF this is your printer/scanner - http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4062&lc=en&cc=us&dlc=en&sw_lang=&product=374568#N223 then there are drivers W7 32 and 64 bit available for this purpose.

  Everything on the PC concerned with your HP printer uninstall, restart the PC, then download and use the appropriate driver (W7 - 32 or 64 bit depending upon need) and see what happens then.

  Whatever it is, as its apparently supported, you're probably better asking HP if you did not already.

• HP PSC 1315 all-in-one: error 1632: Temp folder full or inaccessible, when you try to install HP PSC 1315 all in one

  I get the following installation error when you try to install the HP PSC 1315 all in one.

  [code 1632. The Temp folder is on a drive that is full or inaccessible.

  Free space on the drive or verify that you have permission write to the Temp folder.]

  Hi @tasos251,

  I understand that you're seen a message on your temp folder is full, I'd like to help. Please follow the steps below to clean the computer and install the software;

  1. Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%
  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  3. Download the software and choose to save money, save it on the desktop > AIO_CDB_NonNet_Full_Win_WW_140_408 - 4.exe
  4. After that the downloaded software and extracted, open the temp folder once again, use the instructions in step 1.
  5. Locate and open the folder starting with 7z (example: 7zS2356)
  6. Open the folder Util
     
  7. The CCC folder
  8. If you have a computer HP run the L3uninstall.exe. If you have annon HP computer run the L4uninstall.exe
  9. Once the uninstall is complete, reboot the computer
  10. Follow these steps to reset the registry settings and options for Windows Installer.

• Re - install a hp psc 1401 all-in-one for windows 7 64 bit

  does anyone know how to re - connect a hp psc 1401 all-in-one for windows 7 64 bit? This configuration worked flawlessly for several years now, but it has suddenly stopped working.  I discovered that this model is even more appears on the software and drivers HP site.  Peroxide of hydrogen used to have such excellent customer service, but now it's like this all-in-one is useless without the right software.

  Hello

  The HP PSC 1401 software can be obtained from the HP site.

  Here's the product page with the download of the software of your device:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-75052-1&cc=us&DLC=en&LC=en&OS=4063&product=1103491&sw_lang=

  Kind regards

  Shlomi

• power cord for hp psc 1315 all-in-one

  where can I find a power cord for my printer. I have a hp psc 1315 all-in-one

  Search you the Web?

  https://search.Yahoo.com/search?EI=UTF-8&FR=ytff1-GL-Gen1&p=HP%20psc%201315%20Power%20cord&type=

• HP psc 1315 all-in-one driver download problem?

  Hello..

  I tried for 2 days to download the driver HP 1315 all in one for windows 7 (64-bit)... downloading begins... a full 99%... and he tells me there's one second left... and then it stops the download... in other words... the download never reaches 100%! .. and I can't use it... I was wondering if it is possible to get another link?

  Where are you located?  I just downloaded the file 300 + MB from the link here.  If this fails, you can try this link (ditto, but http:// instead of ftp: / /).

• can I use my C3180 all-in-one with windows 7?

  can I use my C33180 all-in-one with windows &?  and if yes how I have set up?

  Yes you can, you can download drivers from here

  Also, click Start and then right-click on computer and left click on properties to find out if you have 32 or 64 bit Windows 7.

• PSC 1315 all-in-one: paper jam

  My wife was going to print something from our computer and the printer took several leaves inside. It jammed so she shot just leaves in the front now, our computer said there is a paper jam and will not print we. I went through all the steps of the Glade, restarting, etc. that I've read in hp and others who shared their problems. It copies and analyzes very well. The computer tells me that there is a jam. Could have broke us something by pulling the paper to the front?

  Thank you

  Oldfud

  Hi @oldfud

  Welcome to the Forums of HP's Support. I understand your computer continues to tell you that there is a paper jam. I would like to help.

  It is possible that something has been damaged. Although it could be a "hiccup" with the software on the computer. You can try running the HP Print and Scan Doctor. This will check the software. If the problem persists, try this document a view of the "Paper jam" error HP PSC 1315, 1315v, 1315xi, s and 1318 1315 all-in - One Printer Series.

  If you have any questions, or if this does not resolve the problem, let me know.
  If it solves your problem, please click acceptable Solution. This will allow other people with the same problem the solution easily. If you want to say thank you, feel free to click on the laurels.

• Download the software to use for HP PSC 1600 all in one for Windows 7 64-bit full version

  HP P-7 1003 wb desktop, windows 7 64 bit. New computer.

  I want to use my HP PSC 1600 all-in-one printer, but the software disk is for XP.

  I see a complete solution software downloads and driver for XP and Vista only. Thought about trying to install the disc in compatibility and then update.  Would rather download it from the hp site. Can someone help me pin point one to use. Thank you!

  Hello

  Setup of full software functionality for Windows 7 can be downloaded from the page on the link below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-75052-1&cc=us&DLC=en&LC=en&OS=4062&product=390328&sw_lang=

  Kind regards

  DP - K

• I have an ink cartridge error with my HP PSC 1315 all in one.

  Although the inklevel should suffice only the HP 57 watch color cartridge so, where as the HP 56 b & w only. I discovered that the date on both cartridges have already been exceeded. Read on the internet that in this case the printer will be automatically blocked. Replace both cartridges by news will not change the situation. So in fact, the printer is ready for the junkshop and buy a new printer, the only solution. Is it TRUE...! ??

  Hello

  If expired cartridges are in the printer, the printer will not be blocked but error message\light will appear to replace the cartridge.

  If the expired cartridges are replaced with new ones, the problem should be solved.

• Advances of paper but will not print using Windows XP, computer HP Pavilion DV6000 CTO laptop and HP PSC 2210 all in one with USB

  Communication takes place properly between the printer and the computer.

  Paper advance but not printing on the page.

  Printer copies fine.

  Pilots are underway.

  Help, please!

  Hi GraceWolf,

  You did it of any material changes or software on the computer before this problem?

  You can follow this link & check if the problem persists.

  Printer in Windows problems

  Hope the helps of information.

  Please post back and we do know.

• printers HP psc 1315 does not work with windows 7

  BOTTOM of my son recently gave me an Acer computer

  PROBLEM I can't get my printer to work with this computer... I changed the default printer (HP Laser Jet P2050 Series PCL 6) at the mine and get a troubleshooting message... have also a red light flashing next to change cartridge and one beside copies.

  Hello

  ·         What happens when you try to print?

  ·         What is the code or an exact error message you get?

  ·         What operating system is installed on the computer?

  Method 1:

  Run the fixit provided in the link below and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Method 2:

  I suggest that you install the latest driver for the printer and check if that helps:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=374568

  Method 3:

  You can also uninstall the printer and then install and as a default and check if it solves the problem:

  Add or remove a printer

  Change your default printer

  Method 4:

  You can also check out the link below, because it addresses similar issues:

  http://h30434.www3.HP.com/T5/other-printing-questions/sudden-print-cartridge-error-for-PSC-1315-unsolvable/TD-p/277223

• hp psc 1315 all-in-one printer has a memory/hard disk?

  I want to have a printer all-in-one hp psc 1315. is there a hard drive than the personal information?

  Hello

  With a few exceptions, most of the printers have not memory to hold the print jobs (which are not cleared by simply turning off the printer).  The only thing that can be stored in some printers (with fax capacity) is telephone numbers in the fax log.  I don't think that the PSC 1315 has a fax, but if you really want, you can do a hard reset I think that you can unplug the printer from its power source and by holding the power and Cancel buttons down.  You may see a flashing of the lights. That should do it!

• DeskJet F2280 all-in-one with Windows 7, does not analyze, was working fine

  I have an all-in-one Deskjet F2280 my operating system is Windows 7, everything was perfectly working until recently I went to scan a document and nothing happened, the power button blinks for about 30 seconds then stops. I deleted the driver and downloaded the driver date several times but always the same problem - full while downloading I get a fatal error Code 2203, I tried the solutions proposed on the HP troubleshooting page but always end upward with the same problem. I can print & copy perfectly. Please can someone help?

  Hello swallowsretreat

  When you mention that you have tried the HP troubleshooting page you were talking about article "fatal error" error 2203' (MSI 2203) displayed for HP Software Installation in Windows? ' " Otherwise I have suggestion follows first to try to resolve the first fatal error.

  Fatal error MSI message relates to the Microsoft Software install (MSI). As such they problem may be related to more that the software you are trying to install and be linked to the operating system.

  Let me know if you continue to receive the error when installing even after the rest of the article for fatal error 2203. Also have you tried to install the printer on another computer?