PSC 1315, not paper feeding

recently reinstalled my psc 1315 and installed new ink cartridges.  It is "sounds of printing", but the paper does not feed.

Hello

This article covers book food issues and should solve your problem. Give the steps described a shot and tell us if it helps.

Good luck!

Tags: HP Printers

Similar Questions

  • 8500 has not not paper feed.

    Printed sheet then printer stopped feeding. Changed paper... clean the rollers. Still not power.

    Used 8 months without problems so far.

    8500 worked for 9 months with no problems.

    While impossible to print the Word Document. Get messages ON PAPER.

    Do not feed paper

    Cleaning the feeder, own duplexer, zero paper, check for jams.

    Always out of paper message.

    Restarted the printer.  Still problem.

    On the HP Support Site... New firmware downloaded. Then restarted printer.

    Could feeding paper and printing TEST page, but not able to print Word Doc. (??)

    "the message of paper"... would not paper feed.

    Re start printer and the computer. Now print all formats.

  • HP psc 1200: psc1200 paper feeding problem

    will not load paper, rolls move but don't feed

    Hello @Apache655,

    Welcome to the HP support forums.

    I understand that your PSC 1200 does not feed paper.

    I would like to help.

    Paper can leave a very fine dust on the reels. This can prevent the rolls 'capture' the paper.

    I recommend that you clean the rollers.

    Dust, fiber, paper and other debris may accumulate on the pick rollers and cause paper feeding problems. To avoid paper feed issues, clean the rollers inside the printer and in the duplexer (if equipped).
  • PSC 1315 all-in-one: paper jam

    My wife was going to print something from our computer and the printer took several leaves inside. It jammed so she shot just leaves in the front now, our computer said there is a paper jam and will not print we. I went through all the steps of the Glade, restarting, etc. that I've read in hp and others who shared their problems. It copies and analyzes very well. The computer tells me that there is a jam. Could have broke us something by pulling the paper to the front?

    Thank you

    Oldfud

    Hi @oldfud

    Welcome to the Forums of HP's Support. I understand your computer continues to tell you that there is a paper jam. I would like to help.

    It is possible that something has been damaged. Although it could be a "hiccup" with the software on the computer. You can try running the HP Print and Scan Doctor. This will check the software. If the problem persists, try this document a view of the "Paper jam" error HP PSC 1315, 1315v, 1315xi, s and 1318 1315 all-in - One Printer Series.

    If you have any questions, or if this does not resolve the problem, let me know.
    If it solves your problem, please click acceptable Solution. This will allow other people with the same problem the solution easily. If you want to say thank you, feel free to click on the laurels.

  • I can't print from firefox. The paper feeds through the printer but does not print. The same web pages appear when I use internet explore. And the printer works fine with word, Excel etc, but not with firefox.

    Whenever I try to print a page open in firefox it will not print. The paper feeds through the computer, but don't not pring.

    See this:

    http://KB.mozillazine.org/Problems_printing_web_pages

  • HP PSC 1315 Officejet series: the officejet HP PSC 1315 software installation disc does not start

    I'm trying to install the software for a HP PSC 1315 all-in-one officejet on an XP pc. When I put the disc in the CD/DVD drive, that it will not start. When I click on SETUP. EXE it does not start. Tried the drive in another laptop (Win10) and office (Win10) and the drive would go. I put the diskettes for installation of two other programs in the XP and two ran. I downloaded the Setup file of the Support of HP and he wouldn't either. Anyone know what is happening here?

    Hi @jonessbl,

    That will be better answered by the @Dellpeople.

    Thank you.

  • HP PSC 1315 does not work on windows 7

    I recently got a new PC with windows 7... I downloaded the driver for my printer (HP PSC 1315) of the HP site, but my PC does not answer with my printer.

    In the HP Solution Center it recognises my printer and shows that it is plugged in and on, but in "Devices and printers" represents a yellow mark at the printer.

    I tried everything, uninstall and re-setup, manual of rights even tried admin identify processes.

    Hello

    Please pass below for the info

    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/details.aspx?type=hardware&p=HP%20PSC%201315%20All-in-one%20Printer&v=HP&UID=Q5765AABA&pf=0&PI=0&s=HP%20PSC%201315&OS=64-bit please keep in mind that my answer is based on the information in your message. More the better I can answer, Slan go foill, Paul

  • printers HP psc 1315 does not work with windows 7

    BOTTOM of my son recently gave me an Acer computer

    PROBLEM I can't get my printer to work with this computer... I changed the default printer (HP Laser Jet P2050 Series PCL 6) at the mine and get a troubleshooting message... have also a red light flashing next to change cartridge and one beside copies.

    Hello

    ·         What happens when you try to print?

    ·         What is the code or an exact error message you get?

    ·         What operating system is installed on the computer?

    Method 1:

    Run the fixit provided in the link below and check if it helps:

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

    Method 2:

    I suggest that you install the latest driver for the printer and check if that helps:

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=374568

    Method 3:

    You can also uninstall the printer and then install and as a default and check if it solves the problem:

    Add or remove a printer

    Change your default printer

    Method 4:

    You can also check out the link below, because it addresses similar issues:

    http://h30434.www3.HP.com/T5/other-printing-questions/sudden-print-cartridge-error-for-PSC-1315-unsolvable/TD-p/277223

  • Printer HP PSC 1315 and Windows 7 drivers

    Hi guys!

    I can't find Windows 7 64-bit or 32-bit (I use Windows 7 64-bit) drivers for HP PSC 1315 on this page and if I installed the driver more former example Vista 32 or 64 bit installation wizzard could not allowed me I don't know what I can do with that. I need to use this print device. I know that this printer is very old, but I don't have any plan to buy a new one. Now if you'll excuse me I have not good English language skills.

    Message edited by coper471 on 08/19/2009 23:50
    Message edited by coper471 on 08/19/2009 23:51

    This thread has been locked, for more information on HPPIW, please refer to the following support document:

    http://support.HP.com/us-en/document/c02681060

    HP printer Installation Wizard is an application of HP support that helped to download printer software. This support request is no longer supported by HP. This software was last updated was September 22, 2015.

    To download and install the latest version of the software for your HP printer, please visit 123.hp.comor HP support Web site, HP Support Assistant (in English).

  • Photosmart D7560: The Photosmart D7560 no paper feed

    I bought my printer a few years ago and I have not much used.  I tried to use it today and the paper will not feed.  I tried to adjust parameters, thinking that it would work and still no results.  I even tried the cleaning mechanism cartridge and he gave me the same answer, ' load paper '.  I don't know what is happening.  Help, please.

    Welcome to the HP community @TWhite1980 !

    I saw your post on the 'paper feed problem' you meet with your Photosmart D7560 printer, and I want to help! I would like to start working on this problem of cleaning of the rollers in the printer, as over time, dust and paper debris can build up on the rollers and create this exact problem, you have a.

    To see the proper instructions on how to clean the rollers, click on this link and scroll to the bottom for "third step: clean the rollers ' and follow the steps. You can also try to reset the printer and control of any document that you will see in this guide. (Also use standard simple letter to test print paper size or the copy after you are done troubleshooting).

    A Message appears 'jam or jam' for printer HP Photosmart D7560 h

    Please write me back and let me know the result!

  • Paper feed

    I have a Deskjet 2050 printer.  Unfortunately, the paper feeds through. I tried the suggestions offered by HP.  Any ideas?

    Normally this is caused by rolls Sales, but it could be something more serious. All what you can do to correct the problem should be defined in the document below. If this does not work, you may need to replace the printer.

    http://goo.GL/hVD48

  • PSC 1315 wireless

    The "HP psc 1315 all in one ' can print wireless using Windows 10?

    No,

    The PSC 1315 only provide a USB connection, it does not offer the capabilities of network.

    You can find the specifications below:

    http://support.HP.com/us-en/document/c01578373

    Shlomi

  • HP PSC 1315 all-in-One use scanner without ink cartridges

    Hello

    Is it possible to use HP PSC 1315 scanner without ink cartridges? A light ink control is brinking and it won't scan.

    Sorry, you will not be able to scan without changing the cartridge.

    The printer is not working with the lights flashing and an error state.

    So, you will need to have LITTLE ink cartridges to scan.

  • PSC 1315 does nothing

    Hello.

    I just brought a range of printers HP psc 1315.  It is true that it is second hand but it should do the job, that we want to do.  However, when I plug the printer in, all the lights on the Panel on top remain on as well as a number of 8 in the window of copies and the printer does nothing.  It will not communicate with the computer and does not even go through a phase of "warm up" ranging from most printers through.  I downloaded and installed all the drivers and software, but the computer can not save the printer is here because he won't do anything.

    Is this a common ploblem?  He's dead and we're better off getting another printer?  Can it be easily fixed or I did something wrong?

    Any help would be greatly appreciated. Thank you

    Dan

    Hello

    If all the light keep burning as wel as long as all the light in the display of the number are on (showing an 8) it is more likely that the unit has a defect.

  • PSC 1315 - how to stop test page

    I have a HP PSC 1315 all-in-one printer (no suffix). I keep off when not in use. Whenever I turn it on, it displays a test page.

    How can I disable this feature? I have not found any help about it on the HP website.

    Thank you very much

    Markbo wrote:

    I have a HP PSC 1315 all-in-one printer (no suffix). I keep off when not in use. Whenever I turn it on, it displays a test page.

    How can I disable this feature? I have not found any help about it on the HP website.

    The page is printing is an alignment page printed after a cartrdige is changed.  You must complete the alignment process of loading the page on the scanner and pressing the scan button as shown in your user manual, page 33.

Maybe you are looking for

  • How to select text in a stringcontrol

    Hi guys! Just a quick question. I received this order of string in my FP: Note that the text is selected (marked), such as when you click behind the text and made to drag your mouse over it. (Hope, je l'ai expliqué c'est bon ^ ^,)) Well, the case is,

  • How to find the sampling frequency to read the measurement file

    Hello I would like to find/extract the sampling frequency of a .lvm file. Right now I am using the VI 'read file of measurement' and my data charge fine and all, but I need the frequency of sampling for certain calculations. I know the header of the

  • Runtime error '-2147221231 (80040111) ' Automation error

    I have this problem when I open a program. I can't find the solution. Please help me solve the problem.Thank you.

  • Default behavior of short wildcard search

    Hi friends,Is there a way to control the short wild-card as default search behavior when we search and if we "searchterm *", we get results for ' * searchterm * "but it is possible to restrict the result set so that it contains only" searchterm * ",

  • Getting the data center of VirtualMachine with Get-View information

    HelloY at - it a faster way to get the name of data using Get-View and the viewtype VirtualMachine Center.I found the following: Get-View -ViewType VirtualMachine -filter @{ "name" = "mtl1fsit02" } | Select-Object -Property Name, @{ Label = "GuestOSN