PSC 1350 all-in-one: HP Director for PSC 1350 all-in-one - using Windows 10 (64-bit)

Similar Questions

• How can I get the drivers for my Deskjet 932C hp? I use Windows 7 (64-bit).

  HI: I'm having trouble finding a driver hp for my Deskjet 932 C. I use Windows 7 64-BIT

  HI: I appreciate your help. I tried as you suggest "Windows Update" and I'm afraid of office series 932c or 930 does not load on my computer. I saw something on one of the forums that HP would not be able to release the map drivers for a version of Windows 7 64 - BIT for Deskjet 932C until January. I don't know if this is true or not. In my case I have good news. After I discovered that 'Windows Update' did not help, when I went to 'Printers and devices' on my computer, I noticed that an "unknown device" was loaded with my other stuff. I right click on 'Properties' and it automatically searches on the internet for the appropriate drivers. And I'll be darn my printer works. Life is good. Jim

• Need WLAN, WIFI, bluetooth drivers for 'HP Pavilion 15-p052sh J7T81EA' on windows 7 64 bit

  Hello!

  Could not find any drivers, WLAN, WIFI, bluetooth for 'HP Pavilion 15-p052sh J7T81EA' on Windows 7 64 bit.

  Please help me to find the good.

  Thank you.

  Finally found a working one. If anyone else needs it:

  FTP://ftp.HP.com/FTP1/pub/SoftPaq/sp65501-66000/sp65578.exe

• experienced problems for a HP Deskjet 1000 c printer to print using windows 7 64 bit

  One known problems get a HP Deskjet 1000 c to print using windows 7 64 bit. I have updated the drivers for parallel port and a printer. the computer recognizes the printer is there, but no documents will print.

  HP provides the drivers or software for this printer.

  It uses the built-in drivers obtained through windows update

  http://h10025.www1.HP.com/ewfrf/WC/document?docname=c03460648&CC=UK&DLC=en&LC=en&os=4131&Product=61601&sw_lang=

  If your PC does not have a PARALLEL port and you use a converter, this method is often problomatic

  If your PC has a parallel port, then the motherboard must be of an age that is probably not entirely compatible, not with orders other bottlenecks card mother win7

• I am trying to download a WOW patch for my computer. I am using Windows 7 Home premium. I get an error message: "could not initialize storage. You may not be allowed to write on the destination path. »

  I am trying to download a WOW patch for my computer. I am using Windows 7 Home premium. I get an error message: "could not initialize storage.  You may not be allowed to write on the destination path. "I'm on my admin account, so I should have permission to play where I want to. I did have this problem before with Windows 7. Is this a problem in Windows?  Y at - it an easy fix?

  Have you tried to manually install the hotfix by clicking on it, and as an administrator?

• I use Windows 7-64 bit. You post a patch for Brother PE Design 7 run on Windows 64-bit for Brother International

  I use Windows 7-64 bit. You post a patch for Brother PE Design 7 run on Windows 64-bit for Brother International

  I use Windows 7-64 bit. You post a patch for Brother PE Design 7 run on Windows 64-bit for Brother International

  Hello

  Compatibility patches will be developed and distributed by brother.

  Drivers, utilities and software updates for your Brother product:
  http://www.brother-USA.com/downloads/default.aspx

  Brother International - Email online help system:
  http://www.brother-USA.com/AskUs/default.aspx

  Concerning

• my internet connection has been cut, and then I tried to find out. I opened the Troubleshoot, it says that I need to install a driver for my network card. I use Windows 7 Ultimate.

  Two days ago my internet connection has been cut, and then I tried to find out. I opened the Troubleshoot, it says that I need to install a driver for my network card. I use Windows 7 Ultimate. What should I do? Should I re install windows 7 ultimate on my computer?

  Hello

  What brand / model of the computer?

  There is no need to re - install Windows 7. You just need to install the network card drivers. Check out the link and follow the steps.
   
  Automatically get recommended drivers and updates for your hardware
  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware
   
  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

• How to share all my Albums using Windows 7?

  How to share all my Albums using Windows 7? Can I send everyone a URL?

  If you want users to access a link via the web and not need to use of Revel, which is done on a per-album basis. See this link:

  FAQ: How to share files to Revel?

  If you trust the users to add/edit/delete of files, you can share a library of Revel in collaboration with up to 50 users. You must be a premium user or be on the premium of the trial 30 days to create a new library and share all your library this way. The link above will explain this as well. You must enter their email address and they also have this revel. It will give them access to all the photos in an entire library. I hope this helps.

  Guinot

• HP PSC 1317 all-in-One Printer Windows 7 64 bit driver could not install

  Hello

  HP PSC 1317 all-in - One Printer driver Windows 7 64 bit does not.  I tried to install the driver after the incredibly long download (362 MB) to be told by windows that there is no driver.  I have uninstalled the software 3 times and reinstalled.  I unplugged, disconnected, re-downloaded and re-installed.  I downloaded the 64 bit vista drivers (they do not work).  I came to your site to seek support that is denied to me because the printer is out of warranty.  Unless, of course, I want to pay for it.  Which I did, after spending a considerable time (see above) trying to get it work on Windows 7.  Last thing to install on another machine, which I just do exactly the same result, and no sign of anyone else having the same problem everywhere.

  Now what can I do to get this printer to work?

  

  I solved this by using Windows update, which then installed a driver in the end.

  This was not a great experience.

  Why have a download for the version of 64-bit Windows 7 for this printer that puts all the other bloatware of HP but does not contain any driver.  Then you perform the update from Microsoft to get a signed HP driver?  Why can't the HP driver actually be content in the download presumed HP so you can Dodge all the crap software I just uninstall anyway.  A huge waste of time and effort.  Two weeks to solve a problem that should have been done in twenty minutes.

  Not good PR client on any level.

• All-in-one HP Officejet 4355 any ink not levels using Windows 7 (64-bit)

  I have a HP Officejet 4355 all-in-one printer and have recently changed my OS to Windows 7 (64-bit), and there is no available ink level.

  Help, please!

  Thanks in advance

  Concerning

  AggyTheSlyFox

  Hello

  The application of the HP Toolbox is no longer available for Widnows 7 for your printer, just a basic print and scan drivers set is available as you can find below:

  http://support.HP.com/us-en/document/c02663591

  You can print a self-test to find ink levels estimated on some levels, or to ensure print quality is good for some older models.

  Print a self-test of the all-in-one page to verify that the all-in-one works properly. If a test page does not print, contact HP for assistance. To print a self-test page, follow the steps below:

• HP Photosmart C7280 all-in-One Printer Windows 7 64 bit automatic duplex printing

  I have a new laptop Dell, Windows 7 64 bit computer.  I am able to download my printer (which is connected wireless), but I can't get the automatic duplex printing function to work. I bought this particular printer precisely to be able to do automatic double-sided printing. The downloads that I have tried do not work for Windows 7 64-bit. What can I do else?

  Hey,.

  You should enable the option of automatic duplex printing:

   

  Go to control panel > devices and printers.
  Right-click the printer icon, and then click printer properties.
  Click the device settings tab.
  The accessory in Duplex face as installed two automatic and then click OK to save the change.

• Help! Problem using HPSCAN.exe or the TWAIN for HP Laserjet Pro cm1415fnw driver using Windows 7

  I used the HP Laserjet Pro cm1415fnw for over a year without problem.  When I first bought the unit, I was using a Dell with Windows XP desktop computer and connected to the printer via the USB port.  I was able to print and scan from my computer, even in applications that use the driver scan TWAIN such as Word, Acrobat, etc.

  I've since upgraded to a HP slimline s5-1160 computer using Windows 7.  I installed the software my installation CD Laserjet is no problem.  The printer is connected to the computer by USB port.  I can continue to print without problem.  However, I am is no longer able to scan using the HP (HPscan.exe) software, or applications that use TWAIN scanning driver such as Word, Acrobat, etc.  When I try to do, it takes a lot of time before he asks me which scan TWAIN driver to select.  When I select the MFP from HP cm1410 series, the program hangs or returns to the State wherever it was before I tried to scan a picture in a document from the program.

  I can scan however successfully using the Wizard Windows Scan / Fax or if I choose "Devices and printers" in the Start Menu and select 'Start scan' in the menu after right-clicking on the HP printer icon.  However this option restricts my use of the scanner - I can't scan to PDF and I can scan several pages in an OCR application.  I have to analyze on a JPG or TIF or PNG.

  What to try to solve this problem, I did the following without success:

  1. Uninstall and reinstall the drivers and software complete (and using the most recent version on the HP site)
  2. Change ETIOU USB ports
  3. Run the HP scan diagnostic utility, which seems to show an error to the WIA, scanning stage and then recommend that I have uuninstall and reinstall the full software.  When I skip that and allow it to check for TWAIN scanning, it gives me a similar error, suggesting I use the latest version of the drivers (the driver that I use is v 3.0 dated 12/11/2009) so in this case the utility of diagnostic scanning HP provides NOT a fix for this problem other that uninstalling and reinstalling , which I did several times without success
  4. Contact HP support for the computer and the all-in-one (which as I understand it there's different support staff).  Staff of the printer claims it's a software problem and that the staff of the computer must be able to resolve the issue (something not having "launchpad" installed correctly.  When I communicate with the staff of the computer, they say it is a printer driver problem.  So I'm at a standstill
  5. I studied the HP support forums to see from this link - http://support.hp.com/us-en/document/c02661093 - if you can't scan from software HP you can use programs that rely on WIA (Windows Fax and Scan) drivers that I already know I can do it, but implies that HP doesn't have a solution to find out how to scan using their own software!

  My gut tells me that he is one of those problems that many others perhaps, but for which there is no viable solution.  It is possible that during the uninstall and reinstall the software, remains can stay behind that prevent the proper functioning of the drivers, but without knowing how to "clean up" specifically those remains before you reinstall the software, I am at a loss.  Oh and by the way, I also tried using CCleaner and Norton Registry Cleaner to try to clean up these remains, but that effort did not help.

  My question is basically this... or does anyone know of a fix for this problem should I resign myself to use the Wizard Windows Fax and Scan to scan documents and pictures, and forget about using TWAIN programs like HP seems to suggest?  I think that because I use a HP printer/scanner and a HP with Windows 7 computer, this problem should NOT be a problem!

  Hi Radiopeople,

  Follow the steps below to check the WIA Service:

  1. type services.msc in run or search and files program

  2. scroll the page up to the WIA Windows Image Acquisition

  3. make sure that the service is running. Click on stop and then restart to ensure

  4 restart the computer

   

  Restart the services of dependencies:

  1. Click Start, in the search box type 'service ' without quotes.

  2. scroll down until you see Windows Image Acquisition (WIA).

  3. double click on it and go to the Dependencies tab.

  4-2 services must be listed.

  5. close this window and look for the remote procedure call (RPC).

  6. make sure it's on manual or if it is enabled automatically, just leave it. Make sure the service is started.

  7. go to hardware detection kernel and Double click.

  8. set the Startup Type to manual and click on apply.

  9. you should be able to start the service by pressing Start.

  10 now, you are done and the Twain Manager must work and gives you is not a mistake.

  Check the dependencies or sous-dependances:

  Right-click WIA (Windows Image Acquisition) by selecting the first Properties , and then click the dependencies tab. It should list: remote procedure call and Detection of Harward Shell

  Under the CPP, it will then list DCOM Service Process Launcher point final RPC Mapper date back to the start all the items listed as dependencies or dependencies under WIA void list main services.msc and right click then

• Como puedo get the clave COA para realize downgrade from Windows 8 one of Windows 7 32 bit

  Buenas tardes:

  The empresa in the trabajo ha comprado una 86 computers HP EliteDesk 800 G1 SFF, las which amount han venido con license OEM Windows 8 64-bit y con Windows 7 32-bit media.

  El problema radIca in Los sistemas y applications than utilizamos solo con how Windows 7 32 bit, por eso as desde page of HP http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/download-and-install-Windows-7-...    y http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/ de el instalador proffessional SP1 - U ISO of Windows 7 32 bit in formato ISO, el cual, pude instalarlo con normal y correctamente.

  Aun asi, el producto no ha sido activated, y me indican tengo 30 dias para activar fired her will. I have understood what the clave COA me estan tried esta encriptada in el BIOS y is no is muestra formed vignette in el Chasis of the computadora,'re por esa razón Québec no is como puedo activar her license of Windows 7, I have understood that las licenses con buy las son tipo OEM computers y puedo realize downgrade from Windows 8 a Windows 7 con normal y sin problema , in this case pero me pide license there no to get como clave COA.

  May inidcarme los pasos para realize este procedure? Are urgent

  MUCHAS Gracias

  Claudia

  [Redacted for privacy]

  This is NOT official HP customer service and I, like most other people on this forum do not work for HP. It is a forum for users of peer-to-peer supported for class for the HP consumer products. HP maintains no official presence on this forum and it is unlikely that HP will respond in an official capacity. No response from an employee of HP represents his own opinion and not that of HP.

  If computers were purchased with Microsoft's Downgrade rights, they would be shipped with Windows 7 Pro 64 bit installed in the factory and restore HP 8/8.1 Pro 64-bit Windows included media. You will need create the restoration of Windows 7 Pro 64 - bit from at least one of these computers support.

  -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

  If computers ship with Windows 7 Pro 64-bit installed or if you have media to restore Windows 7 Pro 64-bit computers, you may be able to use the below to install Windows 7 Pro 32-bit.

  (1) download and unzip ABR Beta with Windows 7 Support. This is the homepage of ABR for Windows Vista. Please follow the section "How to use" for information and instructions on how to use it. These steps also apply to Windows 7. Perform the 'activation' on multiple computers backup and back up the certificate and the key has been recovered in separate places for comparison. (He draws the original key HP preinstalled OEM factory and certificate from your factory installed OS OEM) Compare the keys and certificates for each computer, they are all the same? Please report back with your findings.

  (2) download and use RWEverything to determine the version of the OA/SLP/SLIC in BIOS of the computer. See this page of Web MyDitigalLife titled "How to check or verify PC motherboard BIOS SLIC Version is SLP OA 2.0 or 2.1 for OEM Activation" for more information on how to use and decipher the information. (Windows 8 use OA 3.0 and this is where the problem can happen) Please report back with your findings.

  (3) If you do not already have a copy, download your version (the version that was preinstalled on your HP computer) Windows 7 from Official Windows 7 SP1 ISO from Digital River.

  (4) install Windows 7 Pro 32 bit, following all prompts as needed. Don't let not Windows try to scoped. Run ABR 'restoration of activation' to 'install' the previously saved until the product key and the certificate. Make sure that Windows is activated, repeat "restoration of activation" until Windows 7 is activated. (It "installs" pre-installed HP OEM factory original key and certificate from your factory installed OS to your new installation of Windows. This HP OEM key and the OEM HP certificate, as well as the BIOS is what allows your computer to HP be factory preactivated.)

  (5) install all drivers from the computer. These can be found on the support page HP for your computer or you can find the drivers on the sites of manufacturers of component various... Intel, NVidia, AMD/ATI, Ralink, Realtek, etc..

  (6) image of the Windows installation and deploy it to the remaining computers.

  -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

  HP EliteDesk 800 compact computer G1 is a class computer business, your question may be better answered the HP Enterprise Business Community. It is also possible to contact the HP Business Support Center for assistance with your question.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

  Esto NO es oficial HP attention al client y yo, como las otras personas in este foro most, no working para Este HP. are not supported-to-peer forum of usuario para productos consumo HP HP class. sin presencia in este foro oficial stays are likely poco that HP is going to an answering machine of manera oficial. Any respuesta UN empleado represents HP known opinion propia y none of the HP.

  If los equipos is compraron con Microsoft Downgrade rights, habrian sido quadrilha con Windows 7 Pro 64 bits wont fabrica desde y Windows 8 / 8.1 Pro 64-bit HP restore / medios recuperacion incluido. Usted will than crear el Pro 64-bit of Windows 7 restore / medios al menos uno estos equipos recuperacion.

  - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = -

  If con los equipos envían of Windows 7 Pro 64 bit wont o tiene Windows 7 Pro 64-bit restore if / medios recuperacion para los equipos, can be able to use the information of abajo para instalar Windows 7 Pro 32-bit.

  (1) Descargar y descomprimir ABR Beta Con Windows 7 support. Here is the main page of the ABR para Windows Vista. Por favor, siga the section "how to usa" para more information e instrucciones sober como each. ESTOS pasos is applied a Windows 7 also. Perform the "copia activacion security" en varios hence there save the clave recuperado y certificado en lugares para comparison separately. (Esto pushes has the original HP OEM certificado preinstalado fabrica of clave y su fabrica installed OS OEM) Comparar las claves y los certificados cada equipo, are all the same? favor informen con sus hallazgos.

  (2) Descargar y use of RWEverything para determining OA / SLP / SLIC en el BIOS del equipo version. Consult this web page MyDitigalLife entitled "Como o PC BIOS SLIC SLP OA Verifique see are version 2.0 o para 2.1 OEM Activation ' for more information sober como use there descifrar information. (Windows 8 OA 3.0 uso y aqui are where is can produce el problema) Por favor informar con sus hallazgos.

  (3) if usted no tiene una copia, download the version (the version that it was pre-wont in sus equipos HP) of Windows 7 desde Windows 7 SP1 ISO Oficial of Digital River.

  (4) to Instalar Windows 7 Pro 32 bit, following todas las instrucciones según sea necessary. No Permite Windows para tratar auto-activation. Run ABR "activacion restore" has the clave of producto y el anterior seguridad certificado "instalar. It check that Windows is activa, repeat "activacion restore" until Windows 7 is activated. (Este "instala" the original HP OEM preinstalada fabrica clave y el su fabrica installed operating system para del certificado knew Windows instalacion limpia.) Esta tecla HP OEM y el certificado OEM from HP, junto con the BIOS are what permite a su equipo ser pre-activated HP fabrica.)

  (5) instale todos los drivers finetoothed para el equipo. ESTOS themselves can find in page soporte para HP knew computadora o you can find los controllers in los web sites different from los manufacturing of components... Intel, Nvidia, AMD / ATI, Ralink, Realtek, etc.

  (6) the instalacion of Windows Imagen e more in remaining teams.

  - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = -

  Medida el EliteDesk 800 HP Small Form Factor equipo G1 are a team of business class, knew pregunta can responderse mejor in Comunidad de Negocios HP business. Also you can consider ponerse in contacto con el Centro de Soporte HP Business para ayuda con su problema request.

  If tiene alguna duda, por favor no no dude en long.

  Por favor, haga click en Blanco Bravo 'Thumbs Up' el para su agradecimiento show

• Laser Jet 4000N: printer driver for Laser Jet 4000N to work with Windows 10 (64-bit)

  Hello

  Could you please tell me what I can use for HP Laser Jet driver done 4000N (with 10 (64-bit) Windows).

  The driver is available? If not, is there an alternative?

  During the installation of the printer, Windows 10 offers the following drivers: (all are for HP Laser Jet 4000 series):

  PCL5

  PCL6

  PS

  and for HP Laser Jet Series 4050:

  PCL 5

  PCL6

  PS

  Thank you in advance for your help!

  Hello Cyber,

  The best for these printers is the PCL 6 driver.

  Kind regards

• Having trouble finding some drivers for my HP Pavilion g7 - 2317 CL (Windows 7 64-bit)

  Looks like I'm not the only person who doesn't like Windows 8.  I rebooted Windows 7 64-bit edition, but can't seem to find the latest drivers: BUS CONTROLLER SM, PCI DEVICE, AND (2 X) USB CONTROLLERS (these are the USB 3.0 ports, my other 2.0 port works fine).  I think the chipset driver should solve all these problems.

  Does anyone have any links or can point me to a similar product on the HP website that I can download these drivers from?

  Thank you, in advance, for your time!

  Hello:

  Please see my response to your other post on the link below.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/HP-Pavilion-G7-2022US-SM-bus-controller-driver/m-p/3230143#M162760