PSC 1610 all-in-one several error messages

Similar Questions

• PSC 1610 all-in-one printer: PSC 1610 will not print

  HP PSC 1610 all-in-one

  No including photographic paper feed and the following messages are received: paper jam or paper. This is not correct. Jam has recently replaced; all paper rolls have been cleaned up with water. Any advice would be appreciated.

  Thanks for your reply. I think you are right to say that it is a hardware sensor problem. In the circumstances, I'll buy a new printer/scanner/copier.

• PSC 1610 all-in-one

  Can I e-print to my HP PSC 1610 all-in-one?

  Hi JudithAMorrison,

  Just to add some additional information for you, your PSC 1610 is not able to ePrint, as it was released before that HP has applied the ePrint technology for their printers. All new printers are usually capable ePrint, so if you are wanting to acquire a range of HP active ePrint printers, you can contact HP Technical Support at the 1-800-474-6836 and see what kind of offers, they have to get you an active ePrint printer.

  If you need anything more, please let me know. Have a great day!

• HP Psc 1610 all-in-one: Hp psc 1610 without Windows installation

  I'm trying to see if my printer will be able to work without the Windows installation disc. I have a HP PSC 1610 all-in-one printer. I'll buy the cable from Sun to hang it to the top, but I can't find the drive mentioned in the installation program. I don't know if it makes a difference, but I have a MacBook Air with Windows. Comments would be appreciated for what I can determine if I need to buy a new printer.

  Windows 10 has a 1600 integrated printer driver, just us the option to Add a printer in Printers and devices.

• HP PSC 1610 ALL-IN-ONE(HOW DO I CHECK THE INK LEVELS)

  HP PSC 1610 ALL-IN-ONE(HOW DO I CHECK THE INK LEVELS)

  Hello

  Please see the links to check ink levels.

  Check ink levels

  http://h10025.www1.HP.com/ewfrf/WC/document?docname=c00257147&tmp_task=prodinfoCategory&CC=US&DLC=en&LC=en&os=4132&Product=390315&sw_lang=

  How can I check my ink or toner levels?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-change-my-ink-or-toner-levels

• Problem with my HP PSC 1610 all in one printer of the series which is printing pages in the right order.

  Basically I have the HP PSC 1610 all in one printer. I know not what has happened, but in some way, when I go to print a document of site Web etc, use the printer to print the last page first and keep printing until the 1st real page printed would be changed, which would print on top printed pages.

  My problem is now, it's actually print the path opposite, now it prints the 1st page of first and last last page, which means when I pick up all the printed pages, I then have to sort the page numbers in the correct order.

  Now, I use my printer waste dumps, I print a lot of game documents such as guides etc.. Now if I was just printing pages 1-5, I'd be fine with it, but at this current moment, I was printing guides with more than 50 pages, which really saddens me to have to keep sorting out pages of paper for good order.

  I must say that it does print no pages in a random order, which means like printing, for example, 10 pages, it does not print the page number 6, 2, 5, 8, 3, 10, 1. It is actually printing the pages in the following way, page 1, 2, 3, 4, 5, 6, 7, 8, 9, 10. (When it's over, page 10 is one who is on top of the stack), but I really need to put it so that it will print the pages in the following order, p. 10, 9, 8, 7, 6, 5, 4, 3, 2, 1. (So at the end of printing, the pages of issue 1 is actually on top of the battery), which will allow me to simply staple the pages without the need of haviing re - sort the order of the pages in the correct format.

  I have all my print programs installed as Director of HP and others, so I can change main settings of printers, but I looked through all the preferences main page tabs and I don't find the option to change the printing order of pages.

  I really need help to set my printer settings to print order in the way I need to, but I don't know where the actual parameters are to change this option, and I tried to do an actual search on Google, but I use too many words, search results do not end up giving me instructions that I need He is always giving me other things, more like excavations at random on everything related to my printer and I can't be bothered, working all day to get the good looking, lol. Can someone give me please the instructions I need to set the print order, I need it to be.

  Thanks in advance for all who are able to provide me with assistance.

  Thank you

  Alison Black.

  LIVE FAST, FIGHT HARD CLOSE.
  HUSTLE, LOYALTY, RESPECT

  John Cena (WWE Wrestling Heavyweight Champion)

  Hey

  HP have the customer.

  has attempted to call them abt the question because I'm clearly useless with this technology * beep *.

  but fisgured this is a setting of the printer.

  so if you have the HP SOLUTIONS CENTER's new installed.

  down the down theres a SETTINGS tab click on it.

  go to the PRINTER SETTINGS, once you have clicked on a new dialog box appears.

  the first tab (by following my printer settings ive got a HP PSC 1311) must be ADVANCED

  Click on that, the last option should be OPTIONS AVAILABLE and bloody, WHICH PAGE ORDER WE WERE looking for THAT PERSON DO CAN TELL US ABOUT.

• My HPOfficejet j4680 wireless all-in-one printer error message says its offline

  I have and have used several times my HPOfficejet j4680 wireless all-in-One printer to print. But this past week it will not print. I keep getting error messages that says that it is offline or turned off. But the green power light is on. The blue wireless light is turned on. And the date & time is common and pulled down on the front.

  Yet, I just continues to be my what. Any suggestions? Thx John.

  Hello JohnGeiser,

  Take a look at following print references:

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print
  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers
   
  Let us know if that helps.
   
  Best regards
  Matthew_Ha

• How to remove memory card from my digital camera to a PSC 1610 all-in-one

  I first took my Sony Cybershot memory card and it is stuck in the slot of the PSC 1610. It seems that the printer/scanner read the card properly because I was able to print a photo proof.

  I tried to use Picasa on my MacBook Pro to transfer the images from the memory card in the printer to the laptop. That doesn't seem to work, so I would get the card memory of the printer/scanner. I don't think just pulling on the map, it's the correct procedure... how to get out? I pushed several buttons on the PSC 1610, nothing helps.

  Any suggestions?

  Hello

  1. is not a good idea to copy photos, files on camera, specially made in the shape of these cards memory cards.

  2 normally, just gently push the card once again, and then exit, the card should come out.

  3 you must map the map as network drive until you can access the card of your computer (s). Here's how (valid for all memory cards):

  http://support.HP.com/us-en/document/c00149194

  Kind regards.

• Officejet 5610 all-in-One: cartridge Error message:-see the documentation for the device to solve the problem

  I used Cartriege world genuing HP ink cartridges refills for the past 3 years.  These cartridges are about 3 months charging sine and worked very well.  I just print a page and then got the above message for the first time.  Any help?

  Thank you

  lurcher1

  Hello @lurcher1,

  Thank you for visiting the Forums from the HP Support! I see you are using cartridges refilled with your HP Officejet 5610. You have always used refilled cartridges, but now you've found a cartridge error.

  I would like you to start troubleshooting here: 'incorrect print cartridge' or 'Print Cartridge problem' message on the Panel of printer for HP Officejet 5600 all-in - One Printer Series

  You will notice Solution: use genuine HP cartridges :

  'HP recommends you to use genuine HP cartridges. HP does not guarantee the quality or reliability of cartridges HP cartridges refilled HP. If you use genuine HP, the following cartridges no could not solve your problem of print quality. »

  To get a better understanding to take a look at the documents below:

  Can I recharge the ink in my HP ink cartridge?

  &

  HP vs reloaded cartridges inkjet print cartridges

  I hope this helps, if you still get the error message after replacing authentic ink cartridges, I suggest you contact our technical support at http://support.hp.com/us-en/contact-hp. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  This is a great question other clients may also wonder; Please click the "accept as Solution" if you think that this message has helped you, or could help others. You can say thank you easily by clicking on the ' Thumbs Up ' below!

• DeskJet 2542 all-in-one: parse error message prints well

  I kept getting this error trying to scan a document for the first time.

  "An error occurred all in communicating with the device. Please check that the device is correctly connected and powered. »

  To make sure that the printer is connected I printed a pdf on file on the computer and managed.

  I installed from the given CD and I intalled software on the HP site that grew to my specific operating system OS X 10.9.  I checked my firewall and allowed him to be opened for printer sharing.  I restarted my modem wifi network, I restarted the computer, and I restarted the printer.  I have reset my printers and reselected this printer... which is the only printer that was available for selection.  The computer recognizes the printer completely, however it just keeps giving me the message quoted above for scanning.

  Help, please.

  Hello @Elochin and welcome to the Forums of HP!

  I understand that you are having problems of scanning.  I would like to help!

  You have problems, make a copy?

  I have a few steps, I recommend you:

  I suggest to remove the printer from your printing system, using this document: uninstalling the software of the printer.

  Once you have deleted, I suggest to check and repair disk permissions: function to fix the permissions of all utility disk drive.

  I also run your Apple updates: OS x: Mac App Store apps and OS X update

  After the updates, I recommend reinstalling the HP Deskjet 2540-All - in - One Printer full feature software and drivers series.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• I have a hp psc 1610 all-in-one printer

  my continuous printer give error message paper jam, I checked and there is no paper in the printer you can tell me how to solve this problem, I have windows xp I have uninstalled and reinstalled software but get the same message

  There is a document that addresses the issues of paper jam in PSC 1610. This document can be found here.

  Hope this helps

• OfficeJet 6300 all-in-One, the error message which is print cartridge is open

  I use my all-in-one HP Officejet 6300 as a standalone Copier, because he's too old to install it on my Windows 7. Now, I get the error message that the print cartridge door is open. I can't find any door open but can not use the machine until I get rid of this message.

  I solved my problem by placing a heavy book on top of the printer. Apparaently, something is a little out of place and the book guard door is closed properly. Not a very technical solution, but it worked for me

• My Mac does not recognize my PSC 1610 all-in-one printer.

  All of a sudden my mac does not recognize my 1610 printer all-in-one.  I think it may have something to do with the system 10.8.2 upgrade but I'm not sure.  I followed the instructions and uninstalled and reinstalled the software.  Software update does not seem to think that miss me anything, no update is listed.  Nothing has changed other that the OS and I use this computer and the printer for 3 years.  No printer appears in the list of system preferences.  Error when I try to print is 'not connected printer.

  Hi beaumast,

  Have you tried using a USB cable?

  If you tried it on your friends computer and got the same experience there is a possibility that the USB port on the printer has malfunctioned. Here are some links that you may find interesting if you consider upgrading your printer.

  HP trade-in program

  Current for sale Photosmart printers

  HP out of warranty of the Support Options for selection of printers HP

• Cannot download driver scanner Epson Stylus NX400 all-in-one printer, error message "error during installation.

  Original title: windows 7 driver scanner epson nx4000 troubleshooting

  message "error during installation"

  Hello

  1. How do you try to download driver?
  2. What is the full and exact error message?

  I suggest to set up the computer in a clean boot state and then try to download the driver manually.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Now, try to download the driver for Epson Stylus NX400 all-in-One printer scanner manually on the manufacturer's Web site.
  https://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&OID=106004&infoType=downloads

  For more information, please see the link.
  Installation of a scanner
  http://Windows.Microsoft.com/en-us/Windows7/install-a-scanner

  I hope this information helps!

   

• Photosmart C6380 all-in-One - printer error message question

  I have a HP Photosmart C6380 all-in-One printer.  It worked well for a number of years, but last year, whenever I want to print something, the orange light blinks and an error message is displayed in the window.  It is said: ' Please Oxc19a0035 turn printer off, then on.  If - before the printer print, I must turn off first and then on again.  It's more boring, to say the least.  Does anyone have a suggestion as to how I can solve this problem?  Thank you, Ms. Dahlia

  The troubleshooting steps described in this document may help to resolve the error.