PSC 2175 windows 7 64 bit - stopped printing

Similar Questions

• HP psc 2175 all-in-one has stopped printing.

  An error message indicates that there is a connection error.  I use a computer MAC S x 10.

  found the problem.  the computer cable was loose.  all is well now.

• How to operate a Casio CW-75 to Windows 7 64 bit cd printer

  Original title: casio cw-75

  Anyone can understand how to operate a Casio CW-75 to Windows 7 64 bit cd printer? I ran, but crashed hard drive and now that I'm all setting up, I can't make it work. Any help is appreciated!

  Hello

  Welcome to the community forums of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue. I see that you have problems with the printer, Casio CW-75.

  You download the drivers from the manufacturer's Web site?

  I suggest you download the drivers for Windows 7 64-bit of the article provided:

  Casio

  http://support.Casio.com/download.php?RGN=3&CID=005&PID=338

  If the problem persists, refer to article:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps. Please reply with the status so that we can help you.

• PSC 2115 all-in-one has stopped printing under Windows 7 64-bit.

  Faced with the driver for PSC2115 which stopped working under Windows 7 64-bit. Problem is that this printer is old, but still in excellent condition and prints of cracking.

  Used the HP trobleshooters to exhaustion. It shows that the printer is ready, but prints just stuck in the print queue and outputs nothing.

  The message of the alignment of the cartridge is also high at all times, but it do not line up when you press on enter.

  Hi G-Force,

  Here is a link to an excellent tool that can help narrow down and solve your problem:

  HP Print and Scan Doctor

• Install HP fails under Windows 7 64 - bit for Printer series CP1020

  Hello!

  I tried to solve this for days, and I've seen a lot of suspense/unresponded to messages about the same topic so I hope that someone sees this!

  Product & number: Color LaserJet CP1025nw CE914A

   

  Operating system: Windows 7 64 bit

   

  Error message: HP LaserJet Installer has stopped working

   

  Changes made to the system before the error occurred: We have updated our info from the router, so I ran the installation disc to reconnect the printer wireless. He uninstall programs initially added to the sleeve of the printer.

  Details:

  -Very well, so 3 days ago we updated our router SSID and password for security reasons. Apparently, there is no easy way to update the details of the network for the CP1025nw so I had to run the installation disc. It prompted me to uninstall the software, reboot, and reinstall. I scoured the guests and then choose 'connect via a wireless network. After searching for the network, I then choose 'installation of Wireless USB '. I have to connect the USB cable when prompted, and as soon as the installation of the drivers I get the Windows error message posted above.  I've attached a screenshot of what appears as well.

  

  Frustrating is that the printer still works after the installation, but only via the USB connection. I need to get wireless working again, but without the software installation work, I can't seem to get there (unless someone knows a hack/work around).

  Event Viewer provides the following details about the error in the application:

  The failing application name: hpbcsiInstaller.exe, version: 1.5.6.4020, time stamp: 0x4bbf9f17
  Name of the failed module: hppccompio. DLL, version: 1.3.0.24, time stamp: 0x4c9685d0
  Exception code: 0xc0000417
  Offset: 0x000073bf
  ID of the process failed: 0 x 970
  Start time of application vulnerabilities: 0x01cdbc45b6632fa1
  The failing application path: D:\Installer\hpbcsiInstaller.exe
  Path of the failing module: C:\Windows\system32\hppccompio. DLL
  Report ID: cb4d353b-2839-11e2-be7e-002564531498

  I tried a wide range of solutions and none of them does not seem to work. Everything from the firmware update, delete all instances of files HP, including .inf files, installation with startup programs and services as the basis because they can get, etc.

  Help, please!

  See you soon,.

  Kirk

  Okay, well that was a beast of a problem to say the least. I am so relieved to be done with this nonsense.

  How it all started - a little recap:

  We changed the password on our wireless network we have updated for security reasons.  I could not find all that helped me update the details of the network (password or the SSID) directly on my printer and said all that I had to uninstall and reinstall everything (and re - run the wifi via USB connection). This is not the case - there is a much simpler solution that I have will cover also the end of this post. Anyway, as mentioned above, during the phase of the installation of device drivers, the installation program plant with the Windows message "HP Installer Setup has stopped working".

  How I fixed it:

  1. print a configuration page by pressing the button "resume" for a few seconds and let go. I have taken note of the following in the upper right:

  Status: Not connected
  Network in use: no
  IP address: 0.0.0.0

  I myself am continued to ask me if I could connect the printer directly via the port ethernet so I...

  2 connect a cat5 from my laptop to the printer.

  3 printed a second Setup page. Now, I got the following information:

  Status: connected

  Network in use: Wired

  IP address: 169.254.71.50

  4. I opened my web browser and tried to 169.254.71.50, but the page wouldn't connect. I recently built a computer game and has found a way to bridge the internet from a laptop wireless to a wired device (http://www.youtube.com/watch?v=96Z1_6rX5qU) so I was wondering if this could work with the printer.

  5 filled my network connections and wireless according to the video above.

  6a open my web browser and once more tried to navigate to 169.254.71.50 and it WORKED! (Not sure if this IP address is unqiue for my printer, but printing a configuration report is the best place to find it.

  7. I clicked on the Networking tab and then select Wireless Configuration.

  8. from there, I was able to activate my wireless connection, my password wireless update and choose I wanted to connect to the wireless network! This is how you can update your wifi information without having to do a complete reinstall!

  9. I now unplugged the ethernet cable (as suggested next to turn on/off radio buttons. My printer wireless power and is light stayed on. I have now connected once again!

  10. I don't think it was a crucial step, but I also implemented printing mobile ePrint

  11. I printed another page of configuration and can now see the following:

  Status: connected

  Periphery in use: wireless

  IP address: 192.168.1.115

  12. I can now navigate to the printer in my browser using this IP address and was able to find and print on my printer wireless through my phone, but still couldn't print from my wireless laptop.

  13. I inserted the original installation CD, held my breath and clicked on install. Hold your breath here is optional.

  14. He asked how I wanted to connect, and as before, I choose wireless. This time, instead of asking me to connect the USB, it FINDS my printer on the network. I chose this, clicked on continue and all installed successfully!

  Everything is now back to normal! I can use my wireless printer once more. Please let me know if anyone has additional information on the steps above need, or if something does not work for you because there is no other solution out there. Believe me, I spent HOURS AND HOURS to research. I hope this helps some of you!

  See you soon,.

  Kirk

• Windows 7 64 - bit Macro printing question

  I have problems printing using a macro in an application called iNews (made by AVID) on Windows 7 64 - bit installed on new Dell OptiPlex 9020 s.

  I've simplified the macro to just {Ctrl + P} {enter} and mouse freezes, keyboard does not (only Ctrl + Alt + Delete), without ANY error messages in the event log.  If I press Ctrl + Alt + Del then Esc, I can get out of the macro and the print job actually ends.  I noticed that the print job is in the queue in the queue, but won't be released only when I press Ctrl + Alt + Delete.

  When I completed the steps manually, the computer is not locked and printing works very well. It's only when I use a macro to print.

  Here are the troubleshooting steps I took:

  AVID contacted and they attempted to help, but it's an OS problem.

  The macro works great on Windows 7 32 bit.

  RAN windows updates

  Updated drivers from Dell

  For PCL6 and PS drivers printing and I tried the drivers updated (but the problem occurs on more than one printer, even Microsoft XPS Document Writer).

  Performed a clean boot (same question at a session of boot)

  Similar macro created in Excel works fine.

  Started the spooler, deleted files in c:\windows\system32\spooler\printers and stopped the spooler

  Any suggestions will be greatly appreciated.

  Thank you

  Karen

  Hello Karen,

  Please keep us updated on the status of the issue.

  As you mentioned are printers on a print server, the question will be better suited to the audience of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet Forums.
   
  TechNet Forum
  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Thank you

• Windows Vista (32 bit) stops responding after installing the program...

  Hello.

  Recently, my Dell XPS M1530 (Windows Vista 32-bit) has been extinguished during the execution of the system updates (we had a power outage during the night and I didn't) and would only start in safe mode. I moved all my documents on a portable HARD drive and reinstalled the operating system to try to save the computer.

  After I did that and reinstalled the drivers (downloaded from the Dell site via my system identification label), I started to load my programs on it (Adobe, Microsoft Office, etc.). After I install a program and exit the installation window, Vista stops responding. I can't click on the Start button (the mouse will go over it, but it does not allow me to select) or one of the other button I have in my toolbar. I can't click anything in the Dock of Dell at the top of my screen, either.

  The only way to turn off the computer must press and hold the Power button until the laptop turns off. I HATE doing this, but there is no other way to turn it off once a program has been installed.

  Any thoughts on what is happening here? I hope this is just some kind of error on my part - I can't afford to get a new machine. I wanted to upgrade to Windows 7 (my machine can handle), but I don't want the same problem occurs.

  Thanks for your help in advance!

  Hello

  As you re-installed Windows and the problem persists the rules well enough software. The power
  failure should be accompanied by a power surge or other that has caused a problem in the computer.

  Makes it sound like there are hardware problems that can probably be repaired. Have you looked at the system
  by a real computer store (not the leeks and the glances at a Best Buy or other stores) or Support of Dell.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows 7-64 bit cannot print on HP Laserjet 1012

  I am running Window 7-64, and I can't find a 64 bit driver to activate the HP Laserjet 1012.  Can someone help this situation? Thanks, Sweet_land04

  I am running Window 7-64, and I can't find a 64 bit driver to activate the HP Laserjet 1012.  Can someone help this situation? Thanks, Sweet_land04

  You can't find a driver because HP does not support this printer under Windows 7 (32-bit or 64-bit).

  Read this web page, follow the links, etc.

• Problem installation of update KB2556532 on Windows Vista 32 bit - stops configuration stage 3 of 3

  original title; Problem installation of update KB2556532 on Windows Vista 32 bit

  I had problems for the last two months trying to install the update to windows KB2556532. I have Windows Vista 32 bit.

  I had a virus that has been cleaned of my laptop. It was windows recovery of fraud, and I don't know if this could have caused the problem at first, but after you have cleaned the virus always impossible to install this update.

  She always says that it has installed ok, but then when the computer has restarted, it is located in 'Configuring Updates step 3 of 3..' he said then that the update was not installed correctly and is back from changes.  Once the computer has booted I am prompted to install the update again.  It continues in this loop.

  Can anyone help me please with this.  I can't online solutions for this problem, I looked for a few weeks to try and fix myself.

  Unfortunately if this utility installs not it is not that there is something corrupt or prevent Windows to install correctly.

  At this point you can try to contact Microsoft through these channels: https://support.microsoft.com/oas/default.aspx?gprid=11732&st=1 to see if they can provide assistance.

• HP psc 1350 & Windows 7 64 bit. The drivers are installed, but when I try to print...

  I've deleted and reinstalled several times.  I've done that it is connected to the internet, etc.  I even watched the progress of the drivers being installed.  And nothing.

  The scanner works perfectly, is not the cable.  I tried all the HP diagnostic tools who say there is nothing wrong, checked for new drivers.  He drives me crazy now!  Can anyone suggest that a last resort solutions please?

  Thank you

  VB

  -Office 2010

  -AVG internet Security 2012 (I test to see if the firewall was causing a problem)

  I (literally) dusted off our old computer and tried the printer.  Similar problem, despite all the old drivers are always there.

  Due to the backlog of work at home of my son, we have admitted his defeat and bought a new printer. And we had the same type of problem.  Further research on the internet, which suggests to restart the print spooler in Services.msc and finally we managed to print something!

  Thank you for your help.

• WINDOWS 7 64-BIT HP2727NF PRINTER

  problems with my printer hpm2727nf laser. It prints well and copy very well, but I have to turn off and on so he could analyze. What should I do? running windows 7 pro 64-bit. any advice would be great, who currently use pcl6 (I think)

  You are welcome. I'm happy to help you.  When was the last time you restarted the PC?  I have seen this "Scanner not ready" error when you use other programs to scan in addition to the software of the printer, and some have been without success (may be out of reach if it happens in another program - but I'll still try).

  Go to your Device Manager (search for 'Services' when you click the Start button and select the Services with the gear next to her icon) and check your Services.  Make sure that 'Windows Image Acquisition' (WIA) is started and automatic.  It's not bad to stop and start over, but to restart the service is not a common practice (referring to your options at the top when you see this window).

  Then make sure that the other two dependencies are running: Detection hardware Kernel and remote procedure call is started and automatic.  Restart the PC and the printer, and then try again.

  If this does not work, try another USB cord.  I would like to know how the suggestion above works for you, and if it isn't, I have a few questions about your USB cord.

  I hope this helps!

• Windows 7 (64 bit) duplex printing on HP LaserJet 1320 using HP Universal printing PCL 5 of

  I can't duplex printing to work.  I've got the box checked with print on 2 sides.

  I drive my LaserJet1320n using the built-in function (resident operating system) PCL5 driver (as referenced by the link given by banhien) on my Windows 7 Professional 64-bit system and I have no problem with the selection of duplex printing.

• PSC 2175 printing very slowly

  Hello

  My HP psc 2175 all-in-one suddenly started printing very very slowly.

  No new drivers have been installed, or any other configuration change was made, so I have no idea what could have happened.

  Any clue?

  Thnks.

  Hello Soldadoryan, there are a few reasons for this. In simple terms, it could be due to the age of printers and use. Maybe this isn't the case in this case, however.

  Power supply from the printer is connected directly to a wall or connected by a surge protector? Visitors are often surprised the difference in performance when they connect the power supply directly into a wall socket because our printers have built in surge protector.

  After to change that, I would recommend checking and updating the firmware of the printer if necessary. The document here will guide you through this just to solve this problem.

  I hope this helps!

• HP PHOTOSMART 6520e-all-in-one: Photosmart 6520 stopped printing.

  Printer was working fine, after that I updated the driver for Windows 10, then just stopped printing, error communicate is not with the printer, but the status of the printers is connectivity is ready, State of the network again on the computer it says ready until I hit print I get error. Print the printer status reporrt of the printer, but no computer or computers of the tour.

  Hi @hpvee

  Welcome to the Forums of HP's Support. I understand that you are experiencing what looks like network problems. I would like to help.

  First of all, try to launch the HP print and Scan Doctor. If the problem persists, try to go through the network troubleshooting steps in this document. Printers HP - printer keeps Wi-Fi connection.

  I would like to know if these measures worked for you. If they did, it's great! Give us some reinforcements by pressing buttons of solution and laurels, that we will help and others see that we have the answers!

• Windows 7 64 bit does not properly close the Tecra A11

  Last week my laptop Tecra A11 ceased to close properly. Windows 7 64 bit stops, the screen goes black but the power of the computer turns off is no longer. Power of the computer stops if I hold down the power button.

  I'm running a Toshiba Express Port Replicator to work and a Toshiba Dynadock U at home. The problem occurs on both sites. I have scanned for viruses, update Windows and defragmented computer, but none of these things had no effect on the problem.

  Anyone know how I can fix this frustrating problem?

  The same thing happens when the laptop is not connected to two external devices?
  Have you installed any additional software that may be responsible for this?

  Have you noticed the same problem as the use of the standby or hibernation mode?