PSC 2510: PSC 2510 Windows 8.1 - new router - can't change network settings

Similar Questions

• Windows Photo Gallery. How can I change the settings in the Windows Photo Gallery to automatically open the image without going to the index first?

  Windows Photo Gallery.  How can I change the settings in the Windows Photo Gallery to automatically open the image without going to the index first?

  Additional information: there are 2 computers that I use on the first Gallery Photo of Windows will open the image and allow me to use the left and right buttons to scroll through the rest of the photos in the folder, that's what I want.

  On the 2nd computer when I open an image it will open the Windows Photo Gallery in an index with thumbnails of the displayed record.  How can I change so that it opens the same thing as the first computer?

  I did the following on both computers; Right-click on the image and select open with...--> choose the default program--> go--> Program Files, Windows Photo Gallery, but it will be open always differently on computer 2.

  Both computers use Windows Vista 32-bit.

  Thanks in advance.

  Australian salvation,

  This would happen if the file associations are corrupted on the computer, try method to set Photo Gallery Windows as the default program for opening files jpeg or png below image types.

  (a) open default programs by clicking the Start button, click default programs.

  (b) click on associate a type of file or Protocol with a program

  (c) in the following list of file protocol search jpeg and make sure that you have associated with the program that uses it and then check if it works.

  Change the programs that Windows uses by default

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I search something, firefox opens a new tab with the results. How can I change the settings to where it will stay all in the same tab?

  When I search something Firefox automatically opens a new tab with the results of this research. How can I change the settings to where the results will appear in the same tab where I made the research?

  If you want to open search results in a new window most often is a parameter of the search engine you use.

• How can I change the settings Windows XP Pro so it stops completely rather than go into sleep mode?

  I run Windows XP Pro and am fed up with my PC, switch to 'sleep' mode when I told him to stop.  How can I change the settings so it stops completely instead of sleep mode? Please do not assume that I know computers - a complete manual would be better. Thank you very much.

  Hello Cosmicbbb,

  Thank you for your message.  If you want to withdraw your option set to the option "Turn off computer", you can make the following registry edit.

  Click Start > click Run > type regedit and press "Enter."

  Navigate to:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ACPI\Parameters.

  Right-click in the empty space in the right pane and select new | DWORD value.

  Attribute value name

  Then, double-click attributes

  Make sure hexadecimal is selected by breaking 70

  Click OK, close the registry editor and restart.

  Now when you choose to stop the computer in the start menu in XP, you will not be able to choose the day before by accident.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Please let us know if it did or did not help to solve your problem.

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• How can I change the settings of "undisclosed recipients" when send mail.  New to using a Mac.  Thank you

  How can I change the settings of "undisclosed recipients" on my Mac Mini... new to using Mac!  Thank you

  What you mean?

  If you enter a recipient in the BCC line other recipients will not see another. Recipients will see undisclosed recipients.

  Leave the line blank

• I want to do "System Restore" in Windows Vista. But I can't change the restore point

  I want to do "System Restore" in Windows Vista. But I can't change the restore point. How to configure manual restore point? Can I enter a date I want to restore? I tried, but it did not work.

  Original title: in Windows vista system restore

  Hello

  Either the system restore point is already created for an earlier date, or is not available.

  You cannot create a restore today Point to return to yesterday.

  You can create a restore today Point to use in the future.

  Here's how to use the Vista system restore:

  http://bertk.MVPs.org/html/restoresysv.html

  See you soon.

• My laptop goes to "standby mode" much too quickly (Windows 7). How can I change the settings to extend this time?

  original title: sleep mode settings

  My laptop goes to "standby mode" much too quickly (Windows 7). How can I change the settings to extend this time?

  Click on start > Type, sleep > change when the computer sleeps

• I can't change some settings in Windows Update

  My Windows 7 PC is part of a workgroup, not domain, but still I can't change some settings for Windows Update. I have the menu drop-down gray and set to download updates but let me choose whether to install them. I checked gpedit.msc > user configuration > administrative templates > windows components > windows update. All 3 setting there are not configured and irrelevant. How can I activate this setting?

  Please note that I have no problem receiving updates, but I just want to be able to change the settings, and also I don't have answers about the probability of my system compromised by any means.

  Thanks for you valuable feedback.

  Zoroax

  Hello

  try to see here, perhaps that it might help you to solve your problem:

  http://blog.eddsn.com/2009/10/Windows-7-update-settings-disabled/

  you may restart your computer after you change the registry value .

  LC

• All my files with the .lnk extension will open with Windows Internet Exploer and I can't change them.

  All my files with the .lnk extension will open with Windows Internet Exploer and I can't change them.
  It's everything that happens anywhere, and I can't change it please help.

  This tutorial should help guide you through this process: http://www.mydigitallife.info/2008/06/20/how-to-edit-or-change-file-type-or-extension-associations-default-programs-in-windows-vista/

  It's a fairly simple process.

• Windows updates won't allow me to change the settings.

  Running Vista on a new Satellite from Toshiba. Updates Windows refuses to allow me to change the settings; It is set to download/update automatically, but I want to see and select updates. When I click on this box, then ok, the authorization window returns. I click 'ok', but there is nothing else that a flicker of the cursor runs. Nothing else comes up, and if I have to cancel the window updates, it is up to the automatic update. I am the only user and have always been administrator.

  It's too late to install MSE or any other antivirus application now.

  You will find information about any Recovery hidden partition manufacturer support pages.

  If you use the disks you created, you would use the OS disk first then the drivers disk.

  If you need help, start a new thread here: http://social.answers.microsoft.com/Forums/en-US/xpinstall/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Wireless configuration of HP C4780 with new router and Mac (wireless network not found)

  About 10 months ago, I bought a new router. I already had several problems connecting my HP C4780 to my old router, and after setting up the new router, I was totally unable to connect the printer wireless to my router.

  I have reset the system to the printer on my Mac, I have reset the settings on my printer wireless, I downloaded the latest HP software, I've uninstalled and reinstalled the HP software several times and I have had no success. When running through the Setup Wizard, I was able to select the printer and method (wireless network set up by USB) before plugging the USB key. After that, the Setup Wizard says "Device not connected" (DUH!) and the screen select network said simply "no discovery goes Wi - Fi network." I ran the print to the printer from the Network Configuration, and he identified 15 networks (mine included). So, it seems that the Wi - Fi receiver on the printer still works...

  Any suggestions?

  P.S. This printer has been nothing trouble since I got it, and I wouldn't recommend it to ANYONE (I like actually...).

  After attempting to run the installer on my boot camp Windows 7 Ultimate version, I fell at last on an obscure statement in the configuration of the PC software for the c4780. It says to connect the computer to the router using the router WPS button.

  I have reset the configuration on the printer and turned off wireless the wireless, then I pushed the the router WPS button until the blue WiFi light on the c4780 lit. THIS SEEMED to BE THE KEY STEPS to CONNECT THE c4780 to MY ROUTER.

  After that, the configuration and setting up the printer on my Mac using the system of preferences was a piece of cake. Functions of the printer and the scanner work with Mac drivers.

  Problem solved... For now... This printer is so buggy, I have no doubt I'll have similar problems in the future.

• I use 33.0.1 firefox. When I googled I don't want a new tab to be opened, unless I have rt click and open. How can I change the settings?

  I use 33.0.1 firefox. When I googled I don't want a new tab to be opened, unless I have rt click and open.

  As I remember, I was not the case before. Could someone help me change the settings or how to open the link on the page in question itself rather open in a new tab?

  Thank you

  Hello, this is a google Executive that you can change to google.com/preferences.

• How can I change the settings in windows explore to open C: no user etc.?

  How can I change default windows explore to open c: Vista?

  John

  Click on the round of Windows (start) > all programs > Accessories and make Windows Explorer right click > properties > Shortcut tab and change the target location box to where you want to open, for example in your case the drive C. type (or change) the c:\ %SystemRoot%\explorer.exe next (note the space) then apply, OK, etc.. If you have more than one shortcut, they all need to be changed.

• In Windows Vista, I can not change the settings in my 'reports on problems and Solutions' Please help

  I'm the administrator of this PC, and it is the only account that I have.

  Quick fix pls help thnks

  Hello
  • What happens when you try to change the settings?
  • You receive an error message?
  • What were the changes made before the problem occurred?
  • Which settings you want to change?
  
  You can view these methods:
  Method 1:
  I suggest you to disable any program of security on your computer and check if it solves the problem.

  After reviewing the question you must reactivate the security on your computer program.

  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  Method 2:
  I recommend you perform the clean boot.

  Configuration of your system in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

   

• All of my files have been converted to open it with Windows Media Player. How can I change this back to normal?

  Hello.

  I don't know what I clicked at all initially, but now, most of my programs have been converted to open it with Windows Media Player, so that they cannot work.

  Even when I click on the system restore (to undo changes I've done previously), Windows Media Player opens and there will be a window that says that you can not read this .exe file.

  I'm stuck and I don't know how else to solve this problem. Help, please!

  Hello.

  I don't know what I clicked at all initially, but now, most of my programs have been converted to open it with Windows Media Player, so that they cannot work.

  Even when I click on the system restore (to undo changes I've done previously), Windows Media Player opens and there will be a window that says that you can not read this .exe file.

  I'm stuck and I don't know how else to solve this problem. Help, please!

  Use this tutorial:
  Restore the .exe file aasociation...
  Read first, then scroll down to the spare part and click on exefix_cu.reg
  Excerpt:
  Difficulty of recording
  To resolve this problem, you must delete the UserChoice key above using a script or REG file. Downloadexefix_cu.reg attached at the end of this article and save it on the desktop. Right click on the REG file and choose merge.

  http://www.Winhelponline.com/articles/165/1/restore-the-exe-file-association-in-Windows-Vista-after-incorrectly-associating-it-with-another-application.html
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.