PSC 2510i AIO: NOT more than scan after upgrade to Snow Leopard

Similar Questions

• Satellite Pro C870 - 1FL PSCBBE - not more than Bluetooth after upgrade to SSD

  I have a Toshiba Satellite Pro PSCBBE C870-1FL with 64-bit Windows 8.

  For a Crucial m500, I changed the 240 GB hard drive.
  With this disk, Windows cannot find the bluetooth adapter:

  WIN8/64 on original HD - Bluetooth OK
  Win7pro/64 clean installation with the original site HD - OK Bluetooth drivers

  WIN8/64 restored rescue DVD - SSD - Bluetooth adapter not found
  Win7pro/64 own facility managers website on the SSD - Bluetooth adapter not found

  Please can you help me make Bluetooth works with the SSD

  Concerning
  Harry

  Hello

  From my point of view it s not matter if you use the SSD or HARD disk drive.
  This should not affect the functionality of BT.

  I think that its driver / software problem and, therefore, you should check this first
  Satellite Pro C870-1FL was equipped with a Realtek WLan / BT combo card.

  The driver BT / install the software according to the system you are using.
  So in the case of Windows 7, you need to install the package of added Value Toshiba, Realtek WLan driver, packet filter for the driver Realtek BT and BT Toshiba stack.

  In the case of win 8 you must install the driver of Toshiba system and the Realtek Bluetooth driver Package filter

  Please check the two options

• After upgrading to Snow Leopard 10.6.5 most of the files does not open in CS3 Rosetta, grayed out menu items

  After upgrading to Snow Leopard 10.6.5 most of the files will not open in CS3 and more menu items are gray,

  like "Photoshop" and "quit Photoshop. I have to force it to quit. Don't know what version of CS3 since 'about this Mac' is not available.

  But CS3 runs in mode of "Rosetta". I had done this years ago, my scanner would work.

  I don't remember how I managed to do run in Rosetta and don't know how to do so he could operate normally, if necessary.

  Change the name of the file or the plugin to have ~ as first character will prevent it to be loaded.

• Cannot parse after upgrading to Snow Leopard - C4580

  I have the HP all in one single C4580. No problems of printing or scanning up to that I've upgraded to Snow Leopard. I can still print but I can't scan unless I have used Image Capture. The printer does not appear in the window HP all in one device selector. I did set up the wizard again but my home network says that the server has failed and will not recognize the scanner. Anyone with the same problem?

  [title edited for clarity]

  You still have the HP software for 10.5 installed.  It does not play well with 10.6.  Let's remove this way:

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Now run a software update.

  Then, remove and reinstall the printer in System Preferences, Print & Fax.

  You do not have the software now since Snow Leopard as well print & scan drivers built-in. scan from Preview apps or Image Capture. Scan from the front panel of the printer does not work yet.

• 'All settings' menu inactive/gray on HPC5550 after upgrade Mac Snow Leopard

  I've just updated for Mac OS X 10.5.8 to 10.6.7 and cannot print.  I get "Printer cartridge failure" messages whenever I try to print.  I only use the black ink cartridge and let the empty color cartridge slot, which never seemed a question before.

  If you are using snow leopard and have the HP software before Snow Leopard (either from a CD not marked as compatible with 10.6 or you recently upgraded to Snow Leopard and had the software HP on your Mac before you upgrade - even if you made a standard from the old software uninstaller or installed new software on top of it) , you must uninstall the software using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall< scrubber="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now run a software update.

  Finally, download and install the "Full Featured" driver and software from the "Support & drivers" link at the top of this page.

• 4200 series Photosmart Studio hangs after upgrade to Snow Leopard

  Of course in the title, this application crashes whenever I try to start. If you can, please tell me what I need to do. I've updated the software I know, but this has not changed. I also deleted and added my (C4280 all-in-One) printer. Thank you in advance for any input.

  Here are the first lines of the report accident (continue to receive something error messages! Could not paste the whole thing):

  I don't know Photosmart studio.  Just use iPhoto and be happy

• call lasts not more than 55 seconds

  Hello

  This is my first time using Skype for calls. For some reason any calls lasts not more than 55 seconds. I tried to sign Skype App and restart again but it still the same.

  My mobile is Nexus 6.

  I use Skype to call the mobile line Turkey.

  After searching the Web, I discovered that I have to use a vpn connectivity and it worked.

• I'm doing a pdf to a file and I need to get the size of the file to be not more than 10 MB. What is the best way to do

  I'm doing a pdf to a file and I need to get the size of the file to be not more than 10 MB. Even when I save it, the image quality at least the file size is 10.9 MB. What is the best way to do

  Open the PDF in Acrobat Pro. Choose file > save as other > PDF of reduced size or PDF optimized (which gives you more options).

• J6450 will not scan since the upgrade to snow leopard

  My J6450 will not scan since the upgrade to snow leopard. I can print fine but when I try and scan is says sorry, scanner could not be initialized (Scanner not found.)

  You scan the front of the unit?  The software included in Sl does not support that.  Also note the HP Scan Pro included in the 10.5 software will not work with 10.6.  The 10.5 software and delete the print queue.  Make sure your 10.6 is update 10.6.1 and go here to download and install the HP software for 10.6 and Setup for your J6540.  You should be able to scan after that.

• My Adobe after effects CC 2015 during installation is not more than 17%

  Hello im wondering why when im trying to install Adobe After Effecs CC 2015 trial its going no more than 17%

  Hello

  Please see the following documents for that matter.

  Troubleshoot Adobe Creative cloud download, install and update questions

  Error in downloading, installing or updating Adobe Creative Cloud applications

  Please let us know if it works for you

• Battery blackBerry Bold 9900 Smartphones worsens more than 50% after 2406 upgrade

  My battery life Bold 9900 worsened considerably after the recent OS 7.0 Bundle 2406 set to level. I had previously struggled to spend the day on a battery, but in general, I could do it for a day and business general use of electronic mail, of limited calls and not Web browsing. Now, after the recent 2406 upgrade, I get only about 50% as much battery life. In addition, the black box of the small Center with white rotating second hand is now a function that comes back regularly throughout the day, and I had to remove my battery to restart my BlackBerry much more often. I've since removed all applications, cut back on all the other battery draining features (screen brightness, wifi, Bluetooth, gps, etc), moved to 2G to extend my battery life. I was already unhappy with the bad battery BlackBerry Bold 9900 life, but after this last update 2406, it is unacceptable for a professional use when it only works for 1/2 day. I hope it's a question of battery RIM known for Bold 9900 that is processed quickly. Otherwise, I am one of the many who will have to move to a more acceptable solution for phone smart business in a perspective of battery life. Thank you.

  Well, I have implemented battery BlackBerry 9900 technical of economy in this forum, and to my surprise, he solved all much more than I expected. My last load battery Bold 9900 lasted 6 days/86 hours (compared to less than 1/2 day) during normal use of business and weekend for the phone calls, emails, texts and the bbm, exclusion using the internet or applications. I moved 2 G + 3 g to 2G only, off all the apps (especially GPS, Google sync and social networks), turned down the brightness of my screen and shorten the waiting time, calendar, disabled wifi and bluetooth, etc. Thanks for all the comments in the forum. They worked. Now I will be slowly adding some applications and using 3 G on the internet once again, and I will more closely control my battery drain in the future.

• 8 simultaneous vMotions works is not more than 10 GbE

  I'm on ESXi 5.5 with 1x10GbE NETWORK adapter on each host dedicated for vMotion vmnic but I still can not only 4 simultaneous vmotions by host.

  Whereas it should be 8 simultaneous vMotions.

  No idea what am I missing or what can I check?

  RTT value is less then 1ms, so there is no latency on my network for vmotion.

  Thanks in advance

  All right so I got the resolution on mine, just thought to share it here.

  Just in case, that may help someone.

  So, here's the deal my vMotion port group, I had optical as active & 1GbE 10GBE as the day before, just in case the link rising 10GbE fails, I wanted to keep redundancy & that's where the problem was.

  After removing the eve 1GbE NIC & trials I started having 8 simultaneous vMotions.

  If the Portgroup your vMotion network where you cannot add nothing less than a 10GbE source and destination, without worrying about whether it is active or standby.  The reason would be that if it fails and he is in standby it will switch to a 1 GB and if this happens and you have more than 4 machines fast vMotioning at the time it may fail and may cause damage to the virtual machines.  Thus, he performs a test to make sure that there are only 10 GbE in all go and return, and if it detects less then it will limit it to 4 simultaneous VM vMotion.

• Active forms appears only if placed at the beginning of the timeline or not more than 1.5 sec. ?

  Why is my Smart Forms (form of the legend) appears only when published if it is placed at the beginning of the timeline or Timing > appear after moved to no more than 1.5 sec 6 Captivate?

  You have another object on the slide, such as a button, click on the box, or smart shape, converted to a button?

  I suspect that you have a button on this slide, which is put on pause to 1.5 seconds by default. Everything that is on your timeline after this point does not appear when you preview or publish, because the project will pause to 1.5 seconds.

• HP Scan does not scan after upgrade of the Lion

  I upgraded to a Lion for Snow Leopard and followed the instructions of HPs (uninstall, reinstall the driver for 10.6, Lion install update). Now HP Scan can't find my scanner (Scanjet 4370).

  OK, we can expect about resetting the printing system, but I got lucky with sweep because digitization will in fact through this system (note that it is called Print & Scan in the Lion system preferences).

  If you can make a copy to the front of the printer to scan works.  If you can't, it is broken.  Its a bit easy than this.

  Did you download this: http://support.apple.com/kb/DL907

  Download it, restart, then delete and add the printer in Sys Prefs.

• HP Simplepass allows not more than one fingerprint

  Hi guys,.

  I have a HP ENVY 15-j112tx, I had now since the beginning of this year as a replacement for my TouchSmart from HP ENVY 15 - j009tx which broke down at Christmas. On my j009tx, I was able to attend several fingers, the software looked just like the pictures on the HP site tutorial, to implement simplepass. On this new laptop however, there is no possibility to register more than one finger, I can't seem to find anything in help for it and I don't know how to upgrade or downgrade the software that came with my previous laptop.

  If anyone knows how to get around this problem, I would really appreciate help!

  See you soon

  Hi Krystian,

  I'm fiddling around with a machine of tower that we have here, and I think that I thought about it. Open your Simplepass and go to my settings (the gear icon) and select Edit. Make sure 'use of fingerprinting as my SimplePass' is checked, and select next. You will then be asked to scan a fingert. Once you have saved the impression, it will keep two fingerprints.